UK Partner for Low Power Busbar System 40A - 160A GL Low Power Busbar_En_July… · Low Power...
Transcript of UK Partner for Low Power Busbar System 40A - 160A GL Low Power Busbar_En_July… · Low Power...
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 7
Composite
C M Y CM MY CY CMY K
GL
ISO 9001-14001-18001
Low Power Busbar System
40A - 160A
Low Power Busbar System 40A - 160A
UK Partner for
ISO 9001-14001-18001
2
Busbar trunking is a highly flexible and cost effective alternative to cables. The higher the current rating of the installation the more cost effective busbar trunking becomes.
Typically, for an equivalent current rating, cable will weigh more than busbar trunking and occupy considerably more space.Busbar trunking is far quicker to install than cable, especially when using the one bolt joint system offered by Gersan.
If we take into account the cost of the cable, the support structure needed to support it due to its greater weight, the cable pulling required to get it in place, the cost of cable tray / ladder, cleats and terminations, the savings from using busbar can besubstantial.Add to this the further cost saving afforded by the use of busbar with the aluminium conductors, an option offered by the Gersan range, then the arguments in favour of using busbar systems instead of cable become overwhelming.
Busbar is also an environmentally better solution. The Gersan Super Compact range is R0HS compliant, manufactured fromhalogen free materials, including all plastic parts and is fully recyclable.
Gersan busbar trunking is totally prefabricated in our ISO 9001:2008 factories meaning, no fabrication is required on site.The ordered components simply need to be bolted together and tap-off boxes fitted.
The one bolt joint offered by Gersan is unique. Unlike other single bolt systems that require the use of a torque wrench, the Gersan bolt head changes from Red to Black once 90Nm of torque has been applied. This feature facilitates easy visual inspection of the joint to confirm that the bolt head is black and therefore torqued correctly.
As standard Gersan offer a two year warranty and guarantee spare parts to be available for ten years
All Gersan busbar systems comply with IEC/EN 61439 / 6, IEC/EN 60529
In relation to IEC/EN 61439 /6, Gersan busbar has the following type tests:
Temperature Rise LimitsDielectric PropertiesShort-Circuit Withstand StrengthEffectiveness of the Protective CircuitClearances and Creepage DistancesMechanical OperationDegree of ProtectionElectrical CharacteristicsStructural StrengthInsulation ResistanceFlame PropagationFire Barrier
Gersan Busbar Systems are protected by design patent.
GL - Low Power Busbar Trunking System
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 8
Composite
C M Y CM MY CY CMY K
GL 40-160A
IP55 GL
1
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
* Lighting, under floor and general power distribution.
* Anodised aluminium housing can act at additional earth conductor.
* 5 pole system can offer Pec, clean earth.
* Conductors are tin plated along their entire length.
* Protected to IP55.
* Holds all international certifications and CE certification for busbar systems.
* Conductors can be aluminium or copper.
* Product range 40A - 160A manufactured to IEC61439 /6.
1000690
50/6055
403
4.51.82,410,982,611010
633
4.51.281,710,71,851414
40 A 63 A 100 A 160 A
1003.55.250.9
1606100.6
uu
mm2mm2mm2
1,20,431,32626
0,80,320,873030
280
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
1
GL - Technical Details
Insulation Voltage
ImpedanceCross Section Phases
Cross Section Neutral
Cross Section Protective Conductor
Short Circuit (Peak)
Short Circuit (1 Sec)
Rated Current
Degree of Protection
IFrequency
Operational Voltage
Reactance
Fault Resistance
Resistance
The housing of the GL range of busbar is manufactured using anodised aluminium which provides a substantial earth path. This design also gives the housing a high mechanical strength making it particularly suitable for industrial applications. In addition, due to its high quality finish, the GL range is particularly suitable for installation in areas where aesthetics are important, such as retail.
The conductors are electrolytic copper 99.9% pure, tin plated and insulated along their full length (except at the tap-off points).
3 or 5 conductor versions are standard. Each 3 m standard straight length is provided with 3 tap-off points at 100 cm distance on one side of the trunking.
End Feed and Centre Feed elements are available. The feed elements are IP55 as standard, and will accept supply cables up to ø10mm.
The contacts at the joints of the busbar, and the contacts of all tap-off units are silver coated. The silver coating minimises the contact
impedances, thus preventing over-heating of the contacts in the event of over-load.
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 9
Composite
C M Y CM MY CY CMY K
50039.7 1000 1000 500
Standard Length Element P+N+PEc
Standard Length Element 3P+N+PEc
406363
100160
30003000300030003000
mm
GLA 4035GLA 6335GLC 6335GLC 10035GLC 16035
950100405513050950100635513050960100635513050960101005513050960101605513050
1,3101,3102,2402,2402,280
3000
28
62
28
62
406363
100160
30003000300030003000
mm
GLA 4033GLA 6333GLC 6333GLC 10033GLC 16033
950600405513030950600635513030960600635513030960601005513030960601605513030
1,8501,9502,6002,7302,850
2
Order code Stock code
Order code Stock code
Weight (Kg/mt)
Weight (Kg/mt)
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
Aluminium
Aluminium
Copper
Copper
Busbar casing can be painted to customer requirements. Please ask our design team for details.
Busbar housing is extruded anodised aluminium.IP55 as Standard.
Available in non-standard lengths. Please ask our design team for details.
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 10
Composite
C M Y CM MY CY CMY K
End Feed unit (Left)
End Feed unit (Right)
225 87
130
40-6363-160
225 40100
130
3
81
PG29
Q38
81
PG29Q38
GLA EF 41GLC EF 41
flOrder code
951001005510050961001605510050
Stock code
1,5501,760
Weight (Kg/unit)
40-6363-160
GLA EF 42GLC EF 42
Order code
951101005510050961101605510050
Stock code
1,7402,000
Weight (Kg/unit)
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
Aluminium
Aluminium
Copper
Copper
Please refer to our design team for further information.
The feeder unit is available fitted with a suitable circuit breaker, or with a switchfuse or isolator as a special order. Please specify your
requirement for rating and any preferred manufacturer type.
If using oversized cables, please state number and size to be accommodated.
End feed units are manufactered from metal and are IP55 rated.
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 11
Composite
C M Y CM MY CY CMY K
Center Feed Unit
225 8710040
130
81
Flexible Joint for Elbow
130
81
100
87
225 40
40-6363-160
GLA 63FXGLC 160FX
952301005511100962301605511100
4
PG21Q29
40-6363-160
GLA EF 43GLC EF 43
Order code
951201005510050961201605510050
Stock code
3,0003,200
Weight (Kg/unit)
Order code Stock code
4,2006,100
Weight (Kg/unit)
L=1000 mm
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
Aluminium
Aluminium
Copper
Copper
Please refer to our design team for further information.
The feeder unit is available fitted with suitable circuit breaker, or with a switchfuse or isolator as a special order. Please specify your requirement for rating and any preferred manufacturer type.
If using oversized cables, please state number and size to be accommodated.
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 12
Composite
C M Y CM MY CY CMY K
15
7040
30
10
Lighting fixtures fixing hanger
Lighting fixtures fixing hanger
Busbar fixing hanger
32
18
125
110
6520
65
20
M5 9
5
GL SSU3
Order code
951400000040003
Stock code
0,133
Weight (Kg/unit)
GL SSU1
Order code
951400000040000
Stock code
0,058
Weight (Kg/unit)
GL SSU2
Order code
951400000040002
Stock code
0,007
Weight (Kg/unit)
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 13
Composite
C M Y CM MY CY CMY K
IP55 Joint Cover
GL ALC
End Cap
72
38
6
GL EC40 (GL EF41)GL EC41 (GL EF42)
Order code
951301605550000951301605550001
Stock code
0,0350,056
Weight (Kg/unit)
Order code
95040160551AL50
Stock code
0,174
Weight (Kg/unit)
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 14
Composite
C M Y CM MY CY CMY K
18
18
Lighting Fixture Tap-Off Plug
Lighting Fixture Tap -Off Plug With 5 x 20mm Fuse
16161616
L1-N-CEL2-N-CEL3-N-CEL1-L2-L3-N-CE
Phase
GL 16F1-CEGL 16F2-CEGL 16F3-CEGL 16F4-1-CE
951900165511000952000165511000952100165511000952200165511000
0,2720,2720,2720,298
16161616
L1-N-CEL2-N-CEL3-N-CEL1-L2-L3-N-CE
Phase
GL 16L1-CEGL 16L2-CEGL 16L3-CEGL 16L4-1-CE
951500165511000951600165511000951700165511000951800165511000
0,2500,2500,2500,276
7
Order code Stock code Weight (Kg/unit)
Order code Stock code Weight (Kg/unit)
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
Standard cable length is 1000mm
Options for 2000mm and 3000mm cable length.
Please refer to our design team for further information.
Please refer to our design team for further information.fu
Standard cable length is 1000mm
Options for 2000mm and 3000mm cable length.
21_35 arapca gl.FH11 12/9/15 4:25 PM Page 15
Composite
C M Y CM MY CY CMY K
PG 13,5
268
71
106
MCB Type Tap-Off Box
GL F32W-CEGL F32G-CE
952200325511000952300325511000
1,8501,950
Execution
3 x MCB3 x 5 x 20mm fuse
8
Order code Stock code Weight (Kg/unit)
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
Maximum MCB or fuse size is 32A
Tap-Off boxes are supplied WITHOUT fuses or MCBs fitted
Tap-off box can be fitted with various ratings and brands of MCB
Please refer to our design team for fufurther information.
Tap-off plugs are available in ratings 16A and32A. The tap-off plugs are manufactured from a zero halogen material. The contacts for the phase and neutral conductors are silver plated copper to provide the best conductivity and resistance to corrosion. All tap-off plugs are equipped with a separate earth contact which is the first to make contact and the last to break.
36-51 arapca.FH11 12/9/15 4:32 PM Page 1
Composite
C M Y CM MY CY CMY K
9
1500 - 2000 mm
GL - Low Power Busbar Trunking System ISO 9001-14001-18001
Suggested distance between hangers
Align and push the two lengths together. Fit and secure the cover plates to the joint.This provides mechanical strength to the joint and rates the joint at IP55.
DECLARATION OF COMFORMITY according to TS EN ISO/IEC 17050-1
CE MARKING
Manufacturer's Name Manufacturer's Address
GERSAN ELEKTRiK TiC. VE SAN. A.S. Anadolu Yakas1 OSB Gazi Bulvan No :39-41 Tuzla I ISTANBUL-TURKEY
declares that the product
Product Name Model Number(s) Features
Busbar Trunking System GNL, GL, GGD, GS, GR 690V/1000V/36kV; 25A/6000A; 50/60 Hz ; Class F/H ; IP 43/55/65/68
conforms with the following standards;
Applied Standards: Type Tests:
Safety IEC/EN 61439-6 IEC/EN 62271 IEC/EN 60529
Temperature Rise Limits Electrical Characteristics Dielectric Properties Short-Circuit Strength
EMC IEC/EN 61439-6 Annex K Effectiveness of The Protective Circuit Clearance and Creepage Distances Mechanical Operation Degree of Protection Structural Strength Crushing Resistance Resistance to Abnormal Heat Resistance to Flame Propagation Fire Barrier in Building Passing EMC
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive and carries the CE Marking accordingly.
This Declaration is granted on accounts of examinations made in;
ASTA Laboratory, the result of which are laid down in test report no. 16932 IPH-Berlin Laboratory, the result of which are laid down in test report no. 1624.2080603.709 VEIKl-VNL Laboratory, the result of which are laid down in test report no. 4552-76 VNL LOVAG Laboratory, the result of which are laid down in test report no. 6994NNL LVT Laboratory, the result of which are laid down in test report no. LVT.D.15-0439-R.OO
ISTANBUL 01.01.15
ISO 9001-14001-18001
Power and Light Equipment Ltd are the sole UK partner for Gersan Elektrik
Gersan have experience spanning over 35 years manufacturing a wide range of electrical equipment that includes busbar trunking, earthing systems, lightning protection, LV distribution panels and pillars, cable containment systems and electric vehicle charging systems.
Power and Light offer UK based technical and commercial support for all Gersan equipment.
Power and Light Equipment LtdUnit 15 Newark Business Park3 Brunel DriveNewarkNottsNG24 2EG
Telephone - 0115 860 2301Email - [email protected] - www.powerandlight.equipment
GL - Low Power Busbar Trunking System