UB BSstatic.hubbsmachine.com › category_sections › theodolite...P. 636.285.4388 F. 636.285.5970...

UBBSOPTICAL TARGETING SPECIALTIESF O R M E T R O L O G Y S U P P O R T S Y S T E M S

Hubbs Machine & Manufacturing, Inc. was started in 1984 to manufacture and distribute targeting and accessories for support of Computer-Aided Theodolite Systems. We now support several coordinate measuring systems: Theodolite, Photogrammetry, Laser Scanner, Laser Tracker, and other emerging coordinate measurement systems.

Hubbs Machine & Manufacturing, Inc. is the original and most trusted manufacturer of quality targeting, accessories, and tooling components. Our designs and part numbers are recognized as the industry standard.

The products shown in our catalog are examples of many variations which are possible in Standard Theodolite, Retro-Reflective Targeting, Laser Tracker Adaptors and Accessories. Many items are available in stainless steel as well as 1144 steel. We offer the largest and most diverse selection of targets and accessories in the market.

Even with the diversity of products, we recognize and support the customer’s needs for specialized targets and accessories. Our customers have the ability to speak with a member of our team that is directly involved with the production of your order. This unique and direct approach provides for a smooth and correct transfer of requirements that reduce the risk of misinformation, raises consumer confidence, and makes your critical deadline possible.

UBBSOPTICAL TARGETING SPECIALTIESF O R M E T R O L O G Y S U P P O R T S Y S T E M S

Hubbs Machine & Manufacturing has been certifying, serializing, & satisfying for years. We will certify any critical dimensions you require & list them on the Hubbs official certified product report.

This document is to certify that the following parts have been manufactured precisely to catalog specifications or customer requirements:

HUBBS MACHINE & MANUFACTURING, INC APPROVAL AUTHORITY

CERTIFIED PRODUCTS REPORT

SM AND R ARE REGISTERED TRADEMARKS OF HUBBS MACHINE & MANUFACTURING, INC R R

6282 Rocky Grove, Cedar Hill, Missouri 63016 Phone: 636-285-4388

C E

R T

I F I E D P R E C I S I O

N C

E R T I F I E D P R E C I S I

O N

PRODUCT ID

.5SM-5000-1875-SS VI12508 .4998 .1873 .0001

.5SM-5000-3750-SS VI12509 .4998 .3748 .0000

.5SM-5000-5000-SS VI12510 .5000 .4999 .0001

.5SM-5000-4375-SS VI12511

Vandelay Industries

12547668

DON COOPER

06/03/2013 1 OF 1

.4999 .4374 .0001

SOLD TO

C.O. #

HUBBS CERTIFIER

C.O. DATE CERTIFICATION SERIES #

SERIAL NUMBER HEIGHT OFFSET SHANK DIAMETER CONCENTRICITY /CENTERLINE

COMPLETE INDEX

PTICALTARGETING SPECIALTIES

E

I

J

K

L

THEODOLITES / TOTAL STATIONA1-A17

LASER TRACKER 1.5 SPHERE MOUNTSG1-G45

A

B

C

D

E

F

G

H

I

J

K

L

PHOTOGRAMMETRYB1-B17

RETRO-REFLECTIVE TAPEC1-C6

BUSHINGSD1-D5

ADAPTORSE1-E9

BAR / ROD ITEMSF1-F7

LASER TRACKER .875 SPHERE MOUNTS H1-H4

LASER TRACKER .5 SPHERE MOUNTSI 1-I 13

PROBING TARGETSJ1-J4

MISCELLANEOUSK1-K7

BUILD-A-KITL1-L2

P. 636.285.4388 F. 636.285.5970 www.hubbsmachine.com6282 Rocky Grove / P.O.Box 540 Cedar Hill, Missouri 63016

TSO ORDERING INFORMATION

FAMILY

“H” TO

CENTERLINE

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

TSO

1144 steel, black oxide

finish

TSO 500 2500 020

REFERENCE NOTES

CUSTOMERPROVIDES INFO

TSOSTANDARD

BUILD

HOW TO ORDER PRODUCTS

• Fill in area below arrows with dimensions as well as any white box that gives more than one option.

• Order part using the completed structure. EX: TSO-500-2500-020

STANDARD THEODOLITE TARGET SIZES IN RED FOR EXAMPLE ONLY: PUT YOUR OWN DIMENSIONS IN THIS AREA

STANDARD THEODOLITE TARGET EXAMPLE:

RETRO-REFLECTIVE TARGET EXAMPLE:

TSOR ORDERING INFORMATION

FAMILY

“H” TO

CENTERLINE

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

TSOR


finish

TSOR 500 2500 125

REFERENCE NOTES


TSORSTANDARD

BUILD


• Order part using the completed structure. EX: TSOR-500-2500-125

RETRO-REFLECTIVE SIZES IN RED FOR EXAMPLE ONLY: PUT YOUR OWN DIMENSIONS IN THIS AREA

When specifying shank sizes on Target or Liner Bushing orders, please identify decimal sizes to four places. Two examples are given below.

CORRECT: 5/16” = .3125INCORRECT: = .312

If a .0005 undersize is required, specify as .3120If a .0008 undersize is required, specify as .2180

CORRECT: 7/32” = .2188INCORRECT: = .218

HOW TO ORDER ( cont’d )

GENERAL NOTES FOR THEODOLITE AND PHOTOGRAMMETRY TARGETING

• Material is 1144 STEEL with BLACK OXIDE FINISH.

• Target dots are located within +/- .0005 on height (unless otherwise noted) or + / - .0005 in relationship of C/L of shank or body.

• All locating shoulders or locating bases are perpendicular to the centerline of the shank and/or body to within .0003 per inch.

• Shank “A” diameter may be any size up to and including 1.000 with a standard tolerance of +.0000 / -.0005. Some limitations apply.

• Dot size, “D” diameter, for standard Theodolite targeting is approximately .010, .020, .030 and .040 with a single reference ring. Standard color is yellow on black face. The most commonly stocked dot size is .020 The dots and rings are filed with a hard colored filler that holds up well to handling, dirt, oils, solvents and other related shop enviroments. Target faces have a light textured finish to reduce glare.

• Retro-Reflective dot size, “D” diameter, for hard-bodied Retro-Reflective targeting, range from approximately up to and including .787 (20mm) Some target dot size limitations apply. Dot sizes available are .062, .092, .125, .157, .187, .200, .250, .312, 9mm, .375, 10mm, .500 and .787 (20mm)

• Standard “H” dimensions are: .3125, 12mm, .500, 24mm, and 1.000

FOR SPECIAL REQUIREMENTS, PLEASE CALL FOR QUOTE. Minimum quantities may apply.


• Order part using the completed structure. EX: 1.5SM-1.000-2500-1144 steel

SPHERE MOUNT SIZES IN RED FOR EXAMPLE ONLY: PUT YOUR OWN DIMENSIONS IN THIS AREA

SPHERE MOUNT EXAMPLE:

1.5 SM ORDERING INFORMATION

FAMILY

“H” TO CENTERLINEOF SPHERE

“A” SHANK

DIAMETERMATERIAL(OPTIONS)

1.5 SM

1.000or

25mm

1144 steelor

(SS)

1.5 SM 1.000 2500 1144 steel

REFERENCE NOTES


1.5 SMSTANDARD

BUILD

TARGET, 90° THEODOLITE T90

TARGET, 90° MAGNETIC THEODOLITE T90M

TARGET, CORNER 90° (LEFT or RIGHT HAND) TC/90 LH or RH

TARGET, CORNER 90° (NEG or POS) TC/90 NEG or POS

TARGET, STRAIGHT-ON THEODOLITETSO

TARGET, MAGNETIC THEODOLITETM

TARGET, 45° THEODOLITET45

TARGET, 45° MAGNETIC THEODOLITET45M

FLUSH MOUNT THEODOLITEFM

TARGET, CORNER 45° (LEFT or RIGHT HAND) TC45 LH or RH

TARGET, CORNER 45° (NEG or POS)TC45 NEG or POS

TARGET, BUTTON TB

TARGET BUTTON VARIABLETBV

DOUBLE VECTOR TARGET THEODOLITEDVT

TARGET, CORNER THEODOLITETC 45° DOUBLE VECTOR TARGET THEODOLITE45 DVT

DOUBLE VECTOR TARGET MAGNETICDVTM

THEODOLITE 1.5 SPHERE T 1.5 S

TOTAL STATION 90TS90

TOTAL STATION 90 MAGNETTS90M

TOTAL 1.5 SPHERETOTAL 1.5S


10

1

2

3

4

5

6

7

8

9

13

17

14

15

11

12

16

INDEXA

INDEXTHEODOLITES / TOTAL STATION

SECTION A INDEX THEODOLITES / TOTAL STATION

A

A1


FAMILY

“H” TO

CENTERLINE

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

T90


finish

T90

.45

.45

+/-.0005"H"

+/-.0005"H"

.17 reference ring

"D" dot diameter

"A" diameter+.0000-.0005

"D" dot diameter

.17 reference ring"A" diameter+.0000

-.0005

T90 Used with computer-

aided Theodolite for targeting holes

approximately 90° to line of sight.

on fileCAD

TARGET, 90° THEODOLITE

T90 FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

T90 ORDERINGNormal offsets for targets are: .3125.50001.00012mm 24mm

Other special offsets available, subject to quote.

REFERENCE NOTES

T90 ORDERING INFORMATION


T90STANDARD

BUILD

T90 - .500

T90 - 1.000

NOTE- DRAWING NOT TO SCALE

SM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc. THEODOLITES / TOTAL STATION

T90M FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

T90M ORDERINGNormal offsets for targets are: .3125.5001.00012mm 24mm


+/-.0005"H"

magnet

"D" dot diameter

.17 reference ring

T90M Used to target above

and 90° to steel surfaces. The side of the body

may be used to target surfaces, edges, or steps

.2500 away.

TARGET, 90° MAGNETIC THEODOLITE

REFERENCE NOTES

T90M ORDERING INFORMATION

FAMILY

“H” TO

CENTERLINE

“D”DOT

DIAMETER MATERIAL

T90M


finish

T90MCUSTOMER

PROVIDES INFO

T90MSTANDARD

BUILD

on fileCAD NOTE- DRAWING NOT TO SCALE

A2

A3


TC / 90 - LH or RH ORDERING INFORMATIONTC / 90 (LH or RH)

Used with computer-aided Theodolite for

targeting edges and/or surfaces.

TC / 90 LH or RH FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

.2500 +/-.0005 .2500 +/-.0005

magnet magnet

"D" dot diameter

.17 reference ring

c/l of dot

datum "A" aligned with c/l of dot within .0005

c/l of dot

.17 reference ring

"D" dot diameter

on fileCAD

TARGET CORNER, 90° (LEFT HAND or RIGHT HAND)TC / 90-LH

TC / 90-RH

FAMILY

LEFTor

RIGHT HAND

“D”DOT

DIAMETER MATERIAL

TC / 90

LHorRH


finish

TC / 90

REFERENCE NOTES


TC / 90 -LH or RHSTANDARD

BUILD


THEODOLITES / TOTAL STATIONSM® & R® are registered trademarks of Hubbs Machine & Mfg. Inc.

on fileCAD

TC / 90 - NEG or POS ORDERING INFORMATION

.2500 +/-.0005 .2500 +/-.0005

.17 reference ring.17 reference ring

c/l of dotc/l of dot

"D" dot diameter"D" dot diameter

magnet magnet

datum "A" alignedwith c/l of dot within .0005

TC / 90 (NEG or POS)



TARGET CORNER, 90° (NEGATIVE or POSITIVE)

TC / 90 NEG or POSFEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

TC / 90-NEG

TC / 90-POS

REFERENCE NOTES

FAMILY

NEGATIVEor

POSITIVE

“D”DOT

DIAMETER MATERIAL

TC / 90

NEGor

POS


finish

TC / 90CUSTOMER

PROVIDES INFO

TC / 90-NEG or POSSTANDARD

BUILD


A4

A5


TSO ORDERING INFORMATIONTSO Used with computer-


approximately in line with line of sight.

on fileCAD

TARGET, STRAIGHT-ON THEODOLITE

TSO FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

TSO ORDERINGNormal offsets for targets are: .3125.5001.00012mm 24mm


+/-.0005"H"

+/-.0005"H"

.45

.45

"A" diameter

"A" diameter

.17 reference ring

.17 reference ring

"D" dot diameter

"D" dot diameter

+.0000-.0005

+.0000-.0005

FAMILY

“H” TO

CENTERLINE

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

TSO


finish

TSO

REFERENCE NOTES


TSOSTANDARD

BUILD



on fileCAD

TM ORDERING INFORMATION

TM FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

TM ORDERINGNormal offsets for targets are: .3125.5001.00012mm 24mm


+/-.0005"H"

+/-.0005"H"

magnet

magnet

.500 +/.0005

.500 +/.0005

"D" dot diameter

"D" dot diameter

.17 reference ring

.17 reference ring

TM Used to target above

steel surfaces. The side of the body may be

used to target surfaces, edges, or steps .2500

away.

TARGET, MAGNETIC THEODOLITE

REFERENCE NOTES

FAMILY

“H” TO

CENTERLINE

“D”DOT

DIAMETER MATERIAL

TM


finish

TMCUSTOMER

PROVIDES INFO

TMSTANDARD

BUILD


A6

A7


T45 ORDERING INFORMATIONT45 Used with computer-


approximately 45° to the line of sight.

T45 FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

T45 ORDERINGNormal offsets for targets are: .3125.50001.00012mm 24mm


.45

+/-.0005"H"

+/-.0005"H"

.45

"D" dot diameter

.17 reference ring

"A" diameter

c/l of dot

.17 reference ring

"D" dot diameter

"A" diameter

+.0000-.0005

c/l of dot

+.0000-.0005

on fileCAD

TARGET, 45° THEODOLITE

FAMILY

“H” TO

CENTERLINE

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

T45


finish

T45

REFERENCE NOTES


T45STANDARD

BUILD



on fileCAD

T45M ORDERING INFORMATION

+/-.0005"H"

magnet

.17 reference ring

"D" dot diameter

c/l of dot

T45M Used to target above steel surfaces when a

45° target face is more applicable. The side of the body may be used

to target surfaces, edges, or steps .2500 away.

TARGET, 45° MAGNETIC THEODOLITE

T45M FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

FAMILY

“H” TO

CENTERLINE

“D”DOT

DIAMETER MATERIAL

T45M


finish

T45MCUSTOMER

PROVIDES INFO

T45MSTANDARD

BUILD



FM ORDERING INFORMATIONFM Used for targeting holes

when a zero height value is required. See FM notes for ordering

specifications on this product.

FAMILY

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

FM


finish

FMCUSTOMER

PROVIDES INFO

FMSTANDARD

BUILD

REFERENCE NOTES

on fileCAD

.45

c/l of dot

"A"

"D" dot diameter

+.0000-.0005

FLUSH MOUNT THEODOLITE

FM FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

FM ORDERINGSTANDARD SHANK SIZES:

.1250, .1875, .2500, .3125, .3750, .4375, .5000, .6250,.7500, 1.000, 6mm, 8mm

Other shank sizes possible, but subject to call-out quote.

A8

A9


TC / 45 (LH or RH)



TC / 45 - LH or RH FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

.2500 +/-.0005 .2500 +/-.0005


.2500 +/-.0005

"D" dot diameter

magnet

.17 reference ring

c/l of dot

on fileCAD

TARGET CORNER, 45° THEODOLITE (LEFT HAND or RIGHT HAND)

TC / 45 - LH or RH ORDERING INFORMATION

TC / 45-LH

TC / 45-RH

FAMILY

LEFTor

RIGHT HAND

“D”DOT

DIAMETER MATERIAL

TC / 45

LHorRH


finish

TC / 45

REFERENCE NOTES


TC / 45 -LH or RHSTANDARD

BUILD



on fileCAD

.2500 +/-.0005

"D" dot diameter

.17 reference ring

.17 reference ring

"D" dot diameter

c/l of dot

.2500 +/-.0005 .2500 +/-.0005

datum "A" alignedwith c/l of dot within .0005magnet

TC / 45 (NEG or POS)



TARGET CORNER, 45° THEODOLITE (NEGATIVE or POSITIVE)

TC / 45 NEG or POS FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

TC / 45 - NEG or POS ORDERING INFORMATION

TC / 45-NEG

TC / 45-POS

REFERENCE NOTES

FAMILY

NEGATIVEor

POSITIVE

“D”DOT

DIAMETER MATERIAL

TC / 45

NEGor

POS


finish

TC / 45CUSTOMER

PROVIDES INFO

TC / 45-NEG or POSSTANDARD

BUILD


A10

A11


REFERENCE NOTES

TB ORDERING INFORMATIONTB and TBV Used with computer-aided theodolite for

targeting .125 diameter tooling holes. For any

other requirements, refer to TBV design.

TB FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

TB ORDERINGCan only select dot diameter.

.0500 +/-.0005

.30.1250

.37

.17 reference ring

"D" dot diameter

+.0000-.0005

on fileCAD

TARGET, BUTTON THEODOLITE

.0500 +/-.0005

"B" +/-.010 "A"

"D" dot diameter

.17 reference ring

+.0000-.0005

TARGET, BUTTON VARIABLE THEODOLITE

TBV ORDERING INFORMATION

FAMILY

“A” SHANK

DIAMETER

“B” SHANK LENGTH

“D”DOT

DIAMETER MATERIAL

TBV


finish

TBVCUSTOMER

PROVIDES INFO

TBVSTANDARD

BUILD

TBV FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

TBV ORDERINGCustomer has more call-out options than TB.

FAMILY

“D”DOT

DIAMETER MATERIAL

TB


finish

TBCUSTOMER

PROVIDES INFO

TBSTANDARD

BUILD

on fileCAD




FAMILY

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

DVT


finish

DVTCUSTOMER

PROVIDES INFO

REFERENCE NOTES

DVT STANDARD

BUILD

DVT ORDERING INFORMATION DVT Used to measure location and angularity of a hole.

DVT FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

.2500 +/-.0005

.45

1.250 +/-.0005

"A" diameter

.17 reference ring

"D" dot diameter(2) places

+.0000-.0005

on fileCAD

DOUBLE VECTOR, TARGET THEODOLITE

.2500 +/-.0005


magnet

"D" dot diameter

.17 reference ring

TARGET, CORNER THEODOLITE

TC ORDERING INFORMATION

TC FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

TC Used with computer-aided Theodolite for targeting straight edges.

FAMILY

“D”DOT

DIAMETER MATERIAL

TC


finish

TCCUSTOMER

PROVIDES INFO

TC STANDARD

BUILD

on fileCAD



A12

A13


45 DVT ORDERING INFORMATION

.17 reference ring(2) places


.2500 +/-.0005.45

1.250 +/-.0005

tapped 6-32 hole.2500 shank andlarger

"A" diameter+.0000-.0005

45 DVT Used to measure

location and angularity of a hole.

45° DOUBLE VECTOR TARGET THEODOLITE

45 DVTFEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

FAMILY

“A” SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

45 DVT


finish

45 DVTCUSTOMER

PROVIDES INFO

45 DVTSTANDARD

BUILD

REFERENCE NOTES



DVTM ORDERING INFORMATION DVTM Used to measure location and angularity of a surface.

DVTM FEATURES1144 STEEL, BLACK OXIDE FINISH (standard)

1.500 +/-.0005

.500 +/-.0005


.17 reference ring

magnet

DOUBLE VECTOR, TARGET MAGNET

2.000 +/-.0005

1.000 +/-.0005


.17 reference ring

magnet

FAMILY

“H” TO

FIRST DOT

“D”DOT

DIAMETER MATERIAL

DVTM


finish

DVTMCUSTOMER

PROVIDES INFO

DVTM STANDARD

BUILD

REFERENCE NOTES

DVTM - .500

DVTM - 1.000


A14

A15


T1.5S Provides same

centerline value as a Spherically Mounted Retro-

Reflector. This allows interchangeability from

Laser Trackersystems to computer-aided

Theodolite systems.

T1.5S FEATURESHARDENED STAINLESS STEEL SHELL/SPHERE R/C 53 – 55 with 1144 STEEL, BLACK OXIDE INSERT.

1.500

45°

c/l of sphere

target face on c/l within+/-.0005

0.50 .01, .02, .03, or .04target dot on c/l of sphere within +/-.0005

+.0000-.0005

on fileCAD

THEODOLITE 1.5 SPHERE

REFERENCE NOTES

T1.5S ORDERING INFORMATION

FAMILY

“D”DOT

DIAMETER MATERIAL

T1.5S.01, .02, .03,

.04

stainless steel(ss) and

ll44 steel

T1.5SCUSTOMER

PROVIDES INFO

T1.5SSTANDARD

BUILD



TS90Used with Total Station

for targeting holes approximately 90

degrees to line of sight.

TS90MUsed with Total Station

to target above and 90 degrees to surface.

Magnetic base securely attaches target to steel

surface.

TS90M FEATURES1144 STEEL BLACK OXIDE FINISH

TS90 FEATURES1144 STEEL BLACK OXIDE FINISH

on fileCAD

on fileCAD

TOTAL STATION 90 MAGNET

TOTAL STATION 90

REFERENCE NOTES

TS90 ORDERING INFORMATION

TS90M ORDERING INFORMATION

FAMILY

“H”TO

CENTERLINE

“A”SHANK

DIAMETER

“D”DOT

DIAMETER MATERIAL

TS90 1.000 .040


finish

TS90

FAMILY

“H”TO

CENTERLINE

“D”DOT

DIAMETER MATERIAL

TS90M 1.000 .040


finish

TS90M



TS90STANDARD

BUILD

TS90MSTANDARD

BUILD



0.45

"H"+/-.0005

"D" dot diameter

"A" diameter

reflective material

+.0000-.0005

"H"+/-.0005

"D" dot diameter

reflective material

magnets

A16

A17


TOTAL1.5S Provides same centerline

value as a Spherically Mounted Retro-

Reflector. This allows interchangeability from

Laser Tracker systems to Total Station systems.

TOTAL1.5S FEATURESHARDENED STAINLESS STEEL SHELL/SPHERE R/C 53 – 55 with 1144 STEEL, BLACK OXIDE INSERT.

on fileCAD

TOTAL STATION 1.5 SPHERE

REFERENCE NOTES

TOTAL1.5S ORDERING INFORMATION

FAMILY

“D”DOT

DIAMETER MATERIAL

TOTAL1.5S .040

stainless steel(ss) and

ll44 steel

TOTAL1.5SCUSTOMER

PROVIDES INFO

TOTAL1.5SSTANDARD

BUILD


45°

1.500 0.530 "D" dot diameter

reflective material

c/l of sphere

target face on c/l within+/-.0005

+.0000-.0005

ENDTHEODOLITES / TOTAL STATION

A


UB BSstatic.hubbsmachine.com › category_sections › theodolite...P. 636.285.4388 F. 636.285.5970...

Documents

Transcript of UB BSstatic.hubbsmachine.com › category_sections › theodolite...P. 636.285.4388 F. 636.285.5970...