Tuv ROHS certificate --plastic pneumatic push in fittings

Project No: 70.435.16.20519.01-00Rev.: 00Date: 2016-05-26Page: 1 of 6

Telephone : +86 21-6141 0123Telefax : +86 21-6140 8600

http://www.tuv-sud.cn

TÜV SÜD Certification and Testing(China) Co., Ltd. .Shanghai BranchTÜV SÜD Group

No.151 Heng Tong RoadShanghai, 200 070P.R.China

TPS_G

CN

_F_09.20E – Rev. 1

2012-10-29

Client: Ningbo XHnotion Pneumatic Technology Co., Ltd.No.669, kangqiao South Road, Jiangbei District,315032 Ningbo, ZhejiangP.R. China

Attn: Mac

Manufacturing place: /

Test subject: Product: Air fitting

Test specification: Refer to next pages

Purpose of examination: Test according to the test specification

Test result: See data on following pages

EXECUTIVE SUMMARY:

TEST REQUESTED CONCLUSION Remark

1

European Council Directive 2011/65/EU on theRestriction of the Use of Certain HazardousSubstances in Electrical and Electronic Equipment(RoHS)

PASS -

Technical Report No. 70.435.16.20519.01-00Rev. 00

Dated 2016-05-26

This technical report may only be quoted in full. Any use for advertising purposes must be granted in writing. This report is theresult of a single examination of the object in question and is not generally applicable evaluation of the quality of other products inregular production.

http://www.tuv-sud.cn/






TPS_G

CN

_F_09.20E – Rev. 1

2012-10-29

1 Description of the test subject

1.1 Technical Data

None

1.2 Test Item

No. Description Pictures Remark

1 Black hard plastic(knob) -

2 Black soft plastic(seal ring) -

3 Silvery metal(block) -







TPS_G

CN

_F_09.20E – Rev. 1

2012-10-29

2 Order

2.1 Date of Purchase Order, Customer’s Reference

2016-05-20

2.2 Receipt of Test Sample, Location

2016-05-20No. 1999 Duhui Road, Shanghai, P.R.ChinaTÜV SÜD Certification and Testing (China) Co., Ltd.Shanghai Branch

2.3 Date of Testing

2016-05-20 to 2016-05-24

2.4 Location of Testing

No. 1999 Duhui Road, Shanghai, P.R.ChinaTÜV SÜD Certification and Testing (China) Co., Ltd.Shanghai Branch

2.5 Points of Non-compliance or Exceptions of the Test Procedure

None







TPS_G

CN

_F_09.20E – Rev. 1

2012-10-29

3 Test Results

3.1 European Council Directive 2011/65/EU on the Restriction of the Use of Certain HazardousSubstances in Electrical and Electronic Equipment (RoHS)

Method: With reference to IEC 62321 Edition 1.0 2008-12

Test Item 3 : Silvery metal(block)

Note: mg/kg = milligram per kilogramMDL= Method detection limit; ND=Not Detected( Less than MDL)

Remark:

1. 2002/95/EC and 2011/65/EU (RoHS) Annex II

Element Pb Cd Hg CrVI PBB PBDEIEC 62321:2008 1000 100 1000 1000# 1000 1000

2. ND = Not detected; mg/kg = milligram per kilogram3. “ * ” Spot-test:

Negative = Absence of CrVI coating, Positive = Presence of CrVI coating; (The tested sample should be further verified by boiling-water-extraction method if the spot test result can not be confirmed.)

Boiling-water-extraction: Negative = Absence of CrVI coating

Positive = Presence of CrVI coating; the detected concentration in boiling-water-extractionsolution is equal or greater than 0.02mg/kg with 50cm2 sample surface area.

“ # ” Positive indicates the presence of Hexavalent Chromium on the tested areas and result be regarded as conflict with RoHS requirement.

Negative indicates the absence of Hexavalent Chromium on the tested areas and result beregarded as no conflict with RoHS requirement.

4. The composting testing was required by the client5. The test items were specified by the applicant

Parameter Unit MDL Result MaximumAllowable Limit3

Lead (Pb) mg/kg 5 ND 1000Cadmium (Cd) mg/kg 2 ND 100Mercury (Hg) mg/kg 5 ND 1000Chromium VI (Cr VI) mg/kg 5 Negative# Negative#

Conclusion - - Pass -







TPS_G

CN

_F_09.20E – Rev. 1

2012-10-29

Method: With reference to IEC 62321 Edition 1.0 2008-12

Test Item 1 : Black hard plastic(knob)Test Item 2 : Black soft plastic(seal ring)

Note: mg/kg = milligram per kilogramMDL= Method detection limit; ND=Not Detected( Less than MDL)

Remarks: 1. The composting testing was required by the client2. The test items were specified by the applicant

Parameter Unit MDL Result MaximumAllowable Limit1 2

Lead (Pb) mg/kg 5 ND 52 1000Cadmium (Cd) mg/kg 2 ND ND 100Mercury (Hg) mg/kg 5 ND ND 1000Chromium VI (Cr VI) mg/kg 5 ND ND 1000Polybromobiphenyls (PBBs)Bromobiphenyl (MonoBB) mg/kg 5 ND ND -Dibromobiphenyl (DiBB) mg/kg 5 ND ND -Tribromobiphenyl (TriBB) mg/kg 5 ND ND -Tetrabromobiphenyl (TetraBB) mg/kg 5 ND ND -Pentabromobiphenyl (PentaBB) mg/kg 5 ND ND -Hexabromobiphenyl (HexaBB) mg/kg 5 ND ND -Heptabromobiphenyl (HeptaBB) mg/kg 5 ND ND -Octabromobiphenyl (OctaBB mg/kg 5 ND ND -Nonabromobiphenyl (NonaBB) mg/kg 5 ND ND -Decabromobiphenyl (DecaBB) mg/kg 5 ND ND -Sum of PBBs mg/kg - ND ND 1000Polybromodiphenylethers (PBDEs)Bromodiphenylether (MonoBDE) mg/kg 5 ND ND -Dibromodiphenylether (DiBDE) mg/kg 5 ND ND -Tribromodiphenylether (TriBDE) mg/kg 5 ND ND -Tetrabromodiphenylether(TetraBDE) mg/kg 5 ND ND -Pentabromodiphenylether(PentaBDE) mg/kg 5 ND ND -

Hexabromodiphenylether (HexaBDE) mg/kg 5 ND ND -Heptabromodiphenylether(HeptaBDE) mg/kg 5 ND ND -

Octabromodiphenylether (OctaBDE) mg/kg 5 ND ND -Nonabromodiphenylether (NonaBDE) mg/kg 5 ND ND -Decabromodiphenyl ether (DecaBDE) mg/kg 5 ND ND -Sum of PBDEs mg/kg - ND ND 1000Conclusion - - Pass Pass -







TPS_G

CN

_F_09.20E – Rev. 1

2012-10-29

4 Remark

None

5 Documentation

Product photo

Hardlines-MESTÜV SÜD Certification and Testing (China) Co., Ltd.Shanghai Branch

Engineer: _________________ Rongrong Song

Technical Report checked: __________________ Wei Sun


Tuv ROHS certificate --plastic pneumatic push in fittings

Engineering

Transcript of Tuv ROHS certificate --plastic pneumatic push in fittings