galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has...
Transcript of galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has...
![Page 1: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/1.jpg)
Rev1.0
galaxyof lightSpecification For LED Crystal Flex Ribbon
F16S
01
![Page 2: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/2.jpg)
Table of ContentsIntroduction
02
03
2. Functions & Features2.1 Product Features2.2 Minimum Bend Diameter
05
1.1 Dimensions of Light 1.2 Technical Parameters 1.3 Optical Parameters
1. Specifications & Parameters 04
7.1 Product Naming Convention 7.2 Certificate 7.3 Third-Party Test Report 7.4 Reliability Test of Light 7.5 Loading chart 7.6 (X,Y) Chromaticity Diagram 7.7 Wavelength of Color Light 7.8 Correlated Color Temperature
7. Appendix 12
6. Packaging 12
5.Compatible Control System 115.1 LT-2005.2 LT-800 & LT-1809 5.3 LT-600
4. Mounting Profile & Clip 09 4.1 Standard Aluminum Profile 4.2 Plastic & Aluminum Combination Profile 4.3 Plastic Profile 4.4 PlastiC Clip
3. Types of Connector 053.1 Injection-Moulded Connector3.2 Dual Injection-Moulded Connector3.3 Sleeve Connector 3.4 Snap Connector3.5 Anti-wicking Ferrule
![Page 3: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/3.jpg)
Introduction
03
F16S is a member of the Galaxy of Light series embodied all the benefits of F16A and F17B with the addition of DMX addressable technology, generating advanced chasing and programmable scenes and complete animated visual effects.
F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests in our lab underthe support of advanced experimental equipments and technology to ensure itmeets the requirements of harsh environments. Also it has passed relevant tests ofthird party inspection authority.
Fully encapsulated in the flexible PVC chamber by utilizing consummate extrusiontechnology, assembled with multiple patented connectors to achieveIP67 protection, easy forinstallation and applicable for various circumstances.
F16S features the capabil ity of offering breathtaking color changing andimpressive animated effects such as color chasing, waves, colorful gradients, syncjumping and fading, etc. when paired with DMX controller, also color consistentLEDs and strong illumination with exquisite appearance.
Applications:1. Outdoor or Indoor Contour Lighting2. Architectural Decorative Lighting3. Cove/Accent Lighting4. Background Lighting5. Signage /Advertisement Lighting
![Page 4: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/4.jpg)
04
1. Specifications & Parameters
Note: Unless otherwise stated, the tolerance of the light is ±0.3mm.
04
1.1 Dimensions of Light
6m
m
15.5mm
150°
C-FR-F16S-TT
C-FR-F16S-DD
C-FR-F16S-WW
Technical Parameters
F16S-D24CC
RGB
UCS2903
DC24V
12W
56
17.8mm
7LEDs (1 pixel)
125mm (1unit)
15m
129g
-20 ~ 60℃
-20 ~ 45℃
0 ~ 45℃
IP65/IP40
F16S-D24CC
All Single Color
UCS2903
DC24V
12W
56
17.8mm
7LEDs (1 pixel)
125mm (1unit)
15m
F16S-D24CC
W+WW(2700-6000K)
UCS2903
DC24V
10W
60+60
16.7mm
6+6LEDs (1 pixel)
100mm (1unit)
15m
F16S-D24CC
RGBW(2700/4000/6500K)
UCS2904
DC24V
15W
56
17.8mm
7LEDs (1 pixel)
125mm (1unit)
10m
1.3 Optical Parameters
Article No.
LED Type
Beam angle
Color
Red
Green
Blue
Amber
F16S-D24CV
SMD
150°
Wavelength
620-630nm
520-530nm
465-475nm
585-595nm
Color
2700K
3000K
3500K
4000K
4500K
5000K
5700K
6500K
CCT
2725±145K
3045±175K
3465±245K
3985±275K
4503±243K
5028±283K
5660±355K
6530±510K
IP65
Protection
1.2 Technical Parameters
Bending
Diameter
D:50mm
3Years
Article No.
Color
Working Voltage
Rated Power/m
LED Qty/m
LED Distance
Min. Cutting Unit
Min. Cutting Length
Continuous Length
Weight/m
Storing Temp.
Environmental Working Tempeature
Environmental Installation Tempeature
IP Rating
![Page 5: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/5.jpg)
05
2.1 Product Features
2.2 Minimum Bend Diameter
2. Functions & Features
3. Types of Connector
Light Surface
The light can only be bent along the light surface.
Light Surface
Do not bend smaller than allowed minimum bend diameter.
3.1 Injection-moulded Connector
Injection-moulded Front
Connector 30mm
19.5mm
9mm
1. High quality SMD LED & IC Chip.
2. WCS2903/2904 IC, SPI signal input, DMX512 signal compatible, DMX address writable or
programable.
3. UV & flame resistant construction(PVC).
4. Patent optical design with custom FPC for optimum thermal management.
5. Smooth color mixing & high illumination.
6. Flexible with 50mm minimum bending diameter.
7. Easy installation and assembly with DIY accessories for joining and terminating.
8. High IP rating(IP65).
9. The product IP rate is ultimately in line with properly applied IP rated connectors.
10. Continuous length up to 15m by powering one end.
11. Environmentally friendly & energy efficient.
12. Automated production, high reliability & long warranty.
13. 5 years life span (Do not continuously operate over 8 hours per day).
Connects light to power supply with
pre-installed front feed cable,
IP65.Cable length available in 0.3m,
1m, 3m, 5m, 10m, 15m, 20m.
Φ50 mm
Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm.
![Page 6: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/6.jpg)
06
3.2 Dual Injection-moulded Connector
20mm19.5mm
9mm
11mm
Φ15mm
70mm
50mm
19mm
13mm
19mm
11mm
28mm
Injection-moulded
End Cap
Dual Injection-moulded
End Cap
Pre-installed termination protection
of the light, IP65.
Pre-installed termination protection of
the light, IP67.
Dual Injection-moulded
Front Connector
Connects light to power supply with pre-installed front feed cable,
IP67.Cable length available in 0.3m, 1m,
3m, 5m, 10m, 15m, 20m.
3.3 Sleeve Connector
20mm
10.5mm
39mm
22mmSleeve Front Connector
Sleeve End Cap
Connects light to power supply. IP40
DIY connector. Cable length available
in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m.
Feed connector*1(Four-pin)
PC cover*1
Anti-skidding clip*1
Heat-shrink tube*1
20mm
10.5mm
15mm
Termination protection of the light.
IP40 DIY connector.
Shading sheet*1
PC Cover*1
![Page 7: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/7.jpg)
Sleeve Power T-feed
L1
L2
50mm
Connects two pieces of lights
together with a T joint, energized
from middle. IP40 DIY connector. L1
and L2 available in 0.3m.
T joint*1(Four-pin)
PC cover*2
Anti-skidding clip*2
Heat-shrink tube*2
L
Sleeve Jumper
Connects two pieces of lights together
with a flexible cable. IP40 DIY connector.
L available in 0.3m, 1m and 3m.
Double-end feed connector*1(Four-pin)
PC cover*2
Anti-skidding clip*2
Heat-shrink tube*2
07
57mm
19.5mm
11
mm
Sleeve Middle Connector
Combine two pieces of lights
together. IP40 DIY connector.
Pin connector*1 (Four-pin)
PC cover*2
Anti-skidding clip*2
Heat-shink tube*1
3.4 Snap Connector
Snap Front Connector
Snap End Cap
Connects light to power supply. IP67
DIY connector. Cable length available
in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m.
Feed connector*1(Four-pin)
Silicone gasket*1
U steel plate*1
Anti-skidding clip*1
PC cover*1
Termination protection of the light.
IP67 DIY connector.
Tail plug*1
Silicone gasket*1
U steel plate*1
Anti-skidding clip*1
PC cover*1
23.5mm
14mm
17mm
49mm
20.5mm
56mm
26.5mm
23.5mm
17.7mm
14mm17
mm
47mm26.5mm
![Page 8: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/8.jpg)
08
18mm
13.5mm
23.5mm
98mm
26.5mm
11mm
18mm
13.5mm
23.5mm
98mm
26.5mm
11mm
Snap Middle Feed Connector
Snap Middle Connector
Interconnect two pieces of lights together
with power cable. IP67 DIY connector.
Double-end feed connector*1
Silicone gasket*2
U steel plate*2
Anti-skidding clip*2
PC cover*2
Interconnect two pieces of lights
together. IP67 DIY connector.
Bidirectional feed connctor*1
Silicone gasket*2
U steel plate*2
Anti-skidding clip*2
PC cover*2
Φ15mm
30mm
Anti-wicking Ferrule
The anti-wicking ferrule is located at
115mm (±5mm tolerance) from the
connector on the cable.
For protection against water ingress
from inside of cable wire and hence
damage the light.
3.5 Anti-wicking Ferrule Note: Unless otherwise stated, the tolerance is ±0.5mm.
Snap Power T-feed
L1
L2
50mm
L
Snap Jumper
Connects two pieces of lights together
with a flexible cable. IP68 DIY connector.
L available in 0.3m, 1m and 3m.
Double-end feed connector*1 (Four-pin)
Silicone gasket*2
U steel plate*2
Anti-skidding clip*2
PC cover*2
Connects two pieces of lights together
with a T joint, energized from middle. IP68
DIY connector. L1 and L2 available in 0.3m.
T joint*1 (Four-pin)
Silicone gasket*2
U steel plate*2
Anti-skidding clip*2
PC cover*2
![Page 9: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/9.jpg)
4.1 Standard Aluminum Profile
4. Mounting Profile & Clip
Model
F16-A/PL
W*H(mm)
17.5*9.5
Standard Length (mm)
35
500
1000
2000
L1 (mm)
17.5
50
100
100
L2 (mm)
/
200
200
200
Screw Hole (mm)
Φ3.5
Φ3.5
Φ3.5
Φ3.5
Hole Number
1
3
5
10
For Product
F16
F16
F16
F16
L1
L2
Φ3.5mm
9.5
mm
17.5mm
Note: Unless otherwise stated, the tolerance of the profile is ±0.5mm.
4.2 Plastic & Aluminum Combination Profile
Model
F16-P+A/PL
W*H(mm)
11.2*19
Standard Length (mm)
35
500
1000
2000
L1 (mm)
17.5
50
100
100
L2 (mm)
/
200
200
200
Screw Hole (mm)
Φ3.5
Φ3.5
Φ3.5
Φ3.5
Hole Number
1
3
5
10
For Product
F16
F16
F16
F16
Φ3.5mm
L1 L2
11
.2m
m
19mm
Note: Unless otherwise stated, the tolerance of the profile is ±0.5mm.
09
![Page 10: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/10.jpg)
10
4.4 PC Clip
37 mm
8.0 mm
5.7
mm
8.0
mm
10 m
m
Φ4.5mm
Note: Unless otherwise stated, the tolerance of the clip is ±0.5mm.
4.3 Plastic Profile
Φ3.5mm
L1 L2
8.8
mm
17mm
Note: Unless otherwise stated, the tolerance of the profile is ±0.5mm.
Model
F16-PC/PL
W*H(mm)
17*8.8
Standard Length (mm)
500
1000
2000
L1 (mm)
50
100
100
L2 (mm)
200
200
200
Screw Hole (mm)
Φ3.5
Φ3.5
Φ3.5
Hole Number
3
5
10
For Product
F16
F16
F16
![Page 11: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/11.jpg)
11
1. SPI signal output, control light directly to achieve max.540 lighting effects.
2. Support third-party DMX 512 interface, it can be realized DMX management mode,
invoke controller’s most function by DMX console.
3. It can work as DMX-SPI decoder, using DMX 512 console to control every channel and
program new changing effect.
Suitable for controlling maximum 100m by series connection and each length
maximum 15m.
5. Compatible DMX Control System (Recommended)
5.1 LT-200 Unit
LT-800
LT-1809
1. LT-1809 decoder works to convert DMX512 digital signal to SPI (TTL) digital signal,
realizing the function of 0~100% dimming or editing all sorts of change effect.
2. LT-800 DMX512 controller work with LT-1809 decoder to control lights .s
3. ch LT-800 can con max. 32 sets LT-1809 decoders.Ea DMX512 controller trol
Suitable for relatively large projects; each decoder can control max. 15m lights.
1. Offline SD card store request programme. Ethernet real time computer control via
synchronous display.
2. DMX 512 and SPI signal outputs are optional; can be connected with DMX console to
form lighting control network.
3. capability, 16 channels signal output, max. control 30720 pixels.Extra large control
Suitable for large projects; each channel can control max. 120m lights, each LT-600
can control around 1600m lights.
5.2 LT-800 & LT-DMX-1809 Unit
5.3 LT-600 Unit
Note:
The Pixel Addressable Light series allows precise control of every cutting increment. To ensure IC chips receive strong control
signals, please adhere to the parameters listed below.
1) To ensure strong signal the 3-wire signal cable should not exceed 10m.
2) For cable lengths longer than 10m, a signal amplifier must be used for strong signal transmission. Please ask our technical team
for more details.
![Page 12: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/12.jpg)
12
6.PackagingPackaging Method
Plastic Plate White Box Carton
Packaging Detail
Light Length White Box Dimension (cm) Carton Dimension (cm) Numbers of White Box Carton Weight (kg)
10m
20m
30m
35*4.2*46
45*4.2*56
61.5*4.2*72
48*37*24
58*47*24
74*63.5*10.5
5
5
2
7
12
8
7. Appendix7.1 Product Naming Convention
For Example: C-FR-F16S-VB-D24CV-RGB-TT-60
7.2 Certificate
Certificating Type
UL LISTED
CE-EMC
Testing Organization
UL
SGS
Certificate Serial Number
20160726-E360029
SZEM160600421301V
Report Reference
E360029-20130322
SZEM160600421301
C-FR-XXX(-)X-XX-XXX-XXX-XXX-XXXLED Quantity/Meter
Cover Color
Color/CCT
Working Voltage
Bending Direction
Light Output
Product Type
Product Category(FR: Flexible Ribbon Light)
Abbreviation of Company Name: CLEAR
![Page 13: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/13.jpg)
13
35w 60w 75w 80w 100w 120w 150w 185w 240w 320w
3m 6m 7.5m 8m 10m 12m 15m 18m 24m 30m
Rated Power /mtr
Power Supply
6.5w/7.2w/8w
Energizing way
10.6w/11w/12w 2m 3.5m 4.5m 5m 6m 7m 10m 12m 14m 20m
7.5 Loading Chart
Type.
F16
Note : 1. These are the light maximum recommended running length subject to selected power supply.
2. For example: t is recommended to use one 80W power supply loading maximum 8m light (7.2w/m) or I
maximum 5m light (12w/m) by energizing the light one end.
7.3 Third-Party Test Report
>>Note: The testing reports and certificates are available from the related official website.
Testing Item
RoHS
IP68: Screw type
IP68: Clasp type
IPX8: Molding type
IPX8: Snap type
Flame retardant
UV@340nm: Light
UV@340nm: PVC
Testing Organization
SGS
TUV SUD
SGS
SGS
SGS
TUV SUD
AOV
AOV
Report Number
CANEC1202163502 A01
68.140.12.136.02
GZES140200135301
GZES140200135401
GZES140200135501
GZES140200135701
GZES140200135801
SZES141200357301
SZES141200357401
SZES141200357501
GZES160600792031
68.140.13.068.01
A002R130308065—1R01
A002R130308065—2R01
7.4 Reliability Test of Light
Environmental Test
IP Rating Test
IK Rating Test
Testing Item
Optical Test
Mechanical Test
Electrical safety Tes
IPX7
IK07
Classification
Hi-lo temperature impact
Corrosion resistant test in swimming pool water
Corrosion resistant test in artificial sea water
Salt Spray Test
Ultraviolet (UV) test
Chromaticity
Photometric
Bending test
Swing test
Insulation resistance strength
1m under water, 1h
Impact energy: 2J
Testing Condition/Method
-40℃~Tamax.+10℃,168h
Free available chlorine:0.4~1.4mg/L
Salt content: 4%
NaCl solution concentration: 5%
0.76W/m2, UVA@340nm, 65℃
Everfine Φ2m ingrating spherePhotometric test system
Everfine GO2000 Luminosity distribution test system
Bending diameter: 50mm, 500 times
Swinging angle:-90°~90°, lift weight: 300g, >750 times
DC 500V, >2MΩ
>>Note: Please contact us for related test report.
IEC60529
IEC 62262
Reference Criterion
IEC 68-2-1 & IEC 68-2-2
CLEAR Doc.
CLEAR Doc.
IEC 68-2-11
ISO 4892-2
ANSI C78.377 & IES LM79
IES LM79
CLEAR Doc.
UL2388
IEC 60598-1
![Page 14: galaxy f o light - LED Project GmbH · F16S is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorousenvironmental resistance, optical, mechanical and electrical tests](https://reader031.fdocuments.in/reader031/viewer/2022011922/6048dddbc5fa6511a7643de2/html5/thumbnails/14.jpg)
14
7.6 (X,Y) Chromaticity Diagram
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.520.26
x
y 2700K
3000K
3500K
4000K
4500K
5000K
5700K
6500K
7.7 Wavelength of Color Light
380nm450nm
470nm
480nm
490nm
500nm
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
510nm
520nm
530nm
540nm
550nm
570nm
560nm
580nm
590nm
600nm
620nm
650nm
770nm
green
cyan
blue
violet
red
orange
yellow
white
(1'3,1'3)
Red
Green
Blue
ANSI STANDARD
Nominal CCT Categories
7.8 Correlated Color Temperature
Target Duv and toleranceNominal CCT
Target CCT and tolerance(K)
Flexible CCT(2700-6500K)
2) 3)T +ΔT
4)DUVT ±0.006
Remark:
1). Six of the nominal CCTs correspond to those in the
fluorescent lamp specification 2700K,3000K(Warm
White),3500K(White),4100K(Cool White),5000K and
6500K(Daylight),respectively.
T is chosen to be at 100K steps (2800,2900
,…,6400K),excluding, hose eight nominal CCTs
listed in Table 1.2 ΔT is given by ΔT = 0.0000108×T +0.0262×T+8.
Duv is given by Duv=57700×(1/T)2-44.6×
(1/T)+0.0085
2).
3).
4).