Tutorial Videos Index · DDM Tutorials (SOLIDWORKS) - Step 5: Copying Models and Drawings and...
Transcript of Tutorial Videos Index · DDM Tutorials (SOLIDWORKS) - Step 5: Copying Models and Drawings and...
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
©Copyright Concurrent Systems Inc. Ltd, 2020, ALL rights reserved.
Tutorial Videos Index
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
Table of Contents
2
DDM Tutorials (SOLIDWORKS)
Stp 1 - Understanding & Configuring the CAD Integration between DDM & SOLIDWORKS...………3
Stp 2 - Creating SOLIDWORKS Parts, Assemblies and Drawings …………………………………………………4
Stp 3 - BOM Management and the Release Manager………………………………………………………………….5
Stp 4 - Change Orders and Up Issuing Models and Drawings……………………………………………………..6
Stp 5 - Copying Models and Drawings and Renaming .………………………………………………………….……7
Stp 6 - Working With SOLIDWORKS Configurations…………………………………………………………………….8
Contents
DDM Tutorials (Creo Parametric)
Stp 1 - Understanding & Configuring the CAD Integration between DDM & Creo Parametric...….9
Stp 2 - Creating Creo Parametric Parts, Assemblies and Drawings ……………………………………………10
Stp 3 - BOM Management and the Release Manager………………………………………………………..……….11
Stp 4 - Change Orders and Up Issuing Models and Drawings…………………………………………………....12
Stp 5 - Copying Models and Drawings and Renaming .………………………………………………………………13
Stp 6 - Working With Creo Family Tables…………………………………………………………………………………...14
DDM Tutorials (Solid Edge)
Stp 1 - Understanding & Configuring the CAD Integration between DDM & Solid Edge...……………15
Stp 2 - Creating Solid Edge Parts, Assemblies and Drawings ………………………………………………………16
Stp 3 - BOM Management and the Release Manager………………………………………………………………….17
Stp 4 - Change Orders and Up Issuing Models and Drawings……………………………………………………..18
Stp 5 - Copying Models and Drawings and Renaming .………………………………………………………….……19
DDM Tutorials (Inventor)
Stp 1 - Understanding & Configuring the CAD Integration between DDM & Inventor...………………20
Stp 2 - Creating Inventor Parts, Assemblies and Drawings …………………………………………………………21
Stp 3 - BOM Management and the Release Manager………………………………………………………………….22
Stp 4 - Change Orders and Up Issuing Models and Drawings……………………………………………………..23
Stp 5 - Copying Models and Drawings and Renaming .………………………………………………………….……24
DDM Tutorials (IronCAD)
Stp 1 - Understanding & Configuring the CAD Integration between DDM & IronCAD...………………25
Stp 2 - Creating IronCAD Parts, Assemblies and Drawings …………………………………………………………26
Stp 3 - BOM Management and the Release Manager………………………………………………………………….27
Stp 4 - Change Orders and Up Issuing Models and Drawings……………………………………………………..28
Stp 5 - Copying Models and Drawings and Renaming .………………………………………………………….……29
DDM Tutorials (AutoCAD)
Stp 1 - Understanding & Configuring the CAD Integration between DDM & AutoCAD...……………..30
Stp 2 - Creating AutoCAD Drawings ……………………………………………………………………………………………31
Stp 3 - BOM Management and the Release Manager………………………………………………………………….32
Stp 4 - Change Orders and Up Issuing Drawings…………………………………………………………………………33
Stp 5 - Copying Drawings and Renaming .………………………………………………………….…………………….…34
DDM Tutorials (DDM Office)
Stp 1 – Logging in and Searching...………….............................................................................................35
Stp 2 - Document Lifecycle Management……………………………………………………………………………………36
Stp 3 – Working with Folders………………………………………………………………………………………………………37
Stp 4 – Formal Approvals Using Folder Actions ………………………………………………………………………….38
Stp 5 - Creating New Folders, Subscriptions, Renaming & Deletion.…………………………………...………39
DDM Tutorials (DDM Admin)
Configuring System Access...……………………………………………………………………………………………………….40
Configuring Custom Attributes and the Category Browser…………………………………………………….......41
Auto-number Administration…………………………………………………………………………………………………..….42
Click on a tutorial title to take you to that page in the document
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
3
0:30 Starting the SOLIDWORKS integration with DDM
0:55 Configuring the Integration
2:00 Configuring the SOLIDWORKS Quick Access Toolbar
3:15 Configuring DDM options when working with SOLIDWORKS
4:35 Calling DDM from SOLIDWORKS
5:40 The DDM ‘working’ directory
DDM Tutorials (SOLIDWORKS) - Step 1:Understanding & Configuring the CAD Integration between DDM & SOLIDWORKS
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=JztxT0UtQBk&t=30shttps://www.youtube.com/watch?v=JztxT0UtQBk&t=55shttps://www.youtube.com/watch?v=JztxT0UtQBk&t=120shttps://www.youtube.com/watch?v=JztxT0UtQBk&t=195shttps://www.youtube.com/watch?v=JztxT0UtQBk&t=275shttps://www.youtube.com/watch?v=JztxT0UtQBk&t=340shttps://www.youtube.com/watch?v=JztxT0UtQBk&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
4
DDM Tutorials (SOLIDWORKS) - Step 2:Creating SOLIDWORKS Parts, Assemblies and Drawings
00:20 Pinning and unpinning a folder, setting the current working folder
01:40 Creating a SOLIDWORKS part and storing it to DDM
02:40 Assigning a part number, description and category
02:55 Choosing a folder to save to, current working folder prompts
05:20 Creating neutral file formats, e.g. STEP files
06:40 Using ‘Send To’ to export data from DDM
07:00 Loading specific file versions
07:35 Creating a SOLIDWORKS drawing and storing it to DDM
09:20 Creating a search favourite
10:30 Creating a SOLIDWORKS assembly (load sub-part) and storing it to DDM
14:40 Examining product structure in DDM
15:10 Reserving items back to the project folder
16:10 Clearing items from your Workbench
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=EP3tdnEkf_E&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=2https://www.youtube.com/watch?v=EP3tdnEkf_E&t=20shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=100shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=160shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=175shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=320shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=400shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=420shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=455shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=560shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=630shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=880shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=910shttps://www.youtube.com/watch?v=EP3tdnEkf_E&t=970s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
5
DDM Tutorials - Step 3:BOM Management and the Release Manager
00:35 Viewing the product structure in DDM
00:50 DDM BOM editor
01:20 Showing the BOM as a Bill of Quantity
02:15 Configuring columns in the BOM editor window
03:25 Setting position numbers and ordering the BOM
04:25 Hiding items not required on the BOM
05:25 Modifying quantities in the BOM
06:50 Adding items to the BOM
07:40 Linking documents to part records
10:10 Exporting the BOM to Excel
10:50 Viewing BOM reports
11:10 Using the Release Manager
13:35 Changing lifecycle state using a folder action and workflow
13:55 Creating a folder action
14:10 Reserving items into a folder/folder action
15:30 Moving a folder/folder action through a workflow
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=35shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=50shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=80shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=135shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=205shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=265shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=325shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=410shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=460shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=610shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=650shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=670shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=815shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=835shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=850shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=930s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
6
DDM Tutorials (SOLIDWORKS) - Step 4:Change Orders and Up Issuing Models and Drawings
00:55 Raising a Change Order
01:40 Customising DDM toolbars
02:20 Reserving affected items for change to the change order folder
02:50 Sending the change order folder forward in the workflow
03:10 Automatically created change order tasks
05:20 Re-assigning work
06:10 Up-issuing a model and drawing in SOLIDWORKS as part of a change order
09:10 Load window warning showing that later issues of components are available
10:15 Using the Replace In Manager
11:10 Setting permissions for users to replace into ‘Released’ assemblies
13:10 Referencing up-issued items back to the project folder
13:30 Closing a change order
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=Xs61CMZiwVw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=4https://www.youtube.com/watch?v=Xs61CMZiwVw&t=55shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=100shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=140shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=170shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=190shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=320shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=370shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=550shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=615shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=670shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=790shttps://www.youtube.com/watch?v=Xs61CMZiwVw&t=810s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
7
DDM Tutorials (SOLIDWORKS) - Step 5:Copying Models and Drawings and Renaming
0:45 Creating new ‘as hoc’ dividers in a folder
1:10 Creating a copy of an existing assembly using ‘Save-As’
4:50 Moving items in a folder to a divider:
6:25 Renaming items
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=5tI9CMitvGE&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=5https://www.youtube.com/watch?v=5tI9CMitvGE&t=45shttps://www.youtube.com/watch?v=5tI9CMitvGE&t=70shttps://www.youtube.com/watch?v=5tI9CMitvGE&t=290shttps://www.youtube.com/watch?v=5tI9CMitvGE&t=385s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
8
DDM Tutorials (SOLIDWORKS) - Step 6:Working With SOLIDWORKS Configurations
1:10 Storing SOLIDWORKS configurations to DDM
2:50 ‘Save All Configurations’
3:50 Viewing configuration relationships in DDM
5:05 Changing the lifecycle state of configurations
5:50 Adding a new configuration to an existing item in DDM
6:40 ‘Save Current Configuration’
8:00 Loading a configuration into SOLIDWORKS
8:25 Up-issuing configurations
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=zK4Bx6VwxJE&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=6https://www.youtube.com/watch?v=zK4Bx6VwxJE&t=70shttps://www.youtube.com/watch?v=zK4Bx6VwxJE&t=170shttps://www.youtube.com/watch?v=zK4Bx6VwxJE&t=230shttps://www.youtube.com/watch?v=zK4Bx6VwxJE&t=305shttps://www.youtube.com/watch?v=zK4Bx6VwxJE&t=350shttps://www.youtube.com/watch?v=zK4Bx6VwxJE&t=400shttps://www.youtube.com/watch?v=zK4Bx6VwxJE&t=480shttps://www.youtube.com/watch?v=zK4Bx6VwxJE&t=505s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
9
0:25 Starting the Creo integration with DDM
2:20 Calling DDM from Creo
3:20 Configuring DDM options when working with Creo
4:30 The DDM ‘working’ directory
5:25 Configuring the Creo Quick Access Toolbar
6:30 Adding the ‘Load Sub-Part’ mapkey to the PDM ribbon
DDM Tutorials (Creo Parametric) - Step 1:Understanding & Configuring the CAD Integration between DDM & Creo Parametric
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=mro239akmXM&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=1&t=25shttps://www.youtube.com/watch?v=mro239akmXM&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=1&t=140shttps://www.youtube.com/watch?v=mro239akmXM&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=1&t=200shttps://www.youtube.com/watch?v=mro239akmXM&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=1&t=270shttps://www.youtube.com/watch?v=mro239akmXM&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=1&t=325shttps://www.youtube.com/watch?v=mro239akmXM&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=1&t=390shttps://www.youtube.com/watch?v=mro239akmXM&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
10
DDM Tutorials (Creo Parametric) - Step 2:Creating Creo Parametric Parts, Assemblies and Drawings
00:50 Pinning and unpinning a folder, setting the current working folder
01:40 Creating a Creo part and storing it to DDM
02:45 Assigning a part number, description and category
03:15 Choosing a folder to save to, current working folder prompts
06:00 Creating neutral file formats, e.g. STEP files
07:30 Using ‘Send To’ to export data from DDM
08:00 Loading specific file versions
08:50 Creating a Creo drawing and storing it to DDM
10:55 Creating a search favourite
12:45 Creating a Creo assembly (load sub-part) and storing it to DDM
17:20 Examining product structure in DDM
17:55 Reserving items back to the project folder
18:50 Clearing items from your Workbench
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2https://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=50shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=100shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=165shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=195shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=360shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=450shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=480shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=530shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=655shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=765shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=1040shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=1075shttps://www.youtube.com/watch?v=xaLN8OFsf0s&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=2&t=1130s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
11
DDM Tutorials - Step 3:BOM Management and the Release Manager
00:35 Viewing the product structure in DDM
00:50 DDM BOM editor
01:20 Showing the BOM as a Bill of Quantity
02:15 Configuring columns in the BOM editor window
03:25 Setting position numbers and ordering the BOM
04:25 Hiding items not required on the BOM
05:25 Modifying quantities in the BOM
06:50 Adding items to the BOM
07:40 Linking documents to part records
10:10 Exporting the BOM to Excel
10:50 Viewing BOM reports
11:10 Using the Release Manager
13:35 Changing lifecycle state using a folder action and workflow
13:55 Creating a folder action
14:10 Reserving items into a folder/folder action
15:30 Moving a folder/folder action through a workflow
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=3https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=35shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=50shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=80shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=135shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=205shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=265shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=325shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=410shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=460shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=610shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=650shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=670shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=815shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=835shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=850shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=930s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
12
DDM Tutorials (Creo Parametric) - Step 4:Change Orders and Up Issuing Models and Drawings
01:15 Raising a Change Order
01:50 Customising DDM toolbars
02:30 Reserving affected items for change to the change order folder
03:10 Sending the change order folder forward in the workflow
04:10 Automatically created change order tasks
05:45 Re-assigning work
06:15 Up-issuing a model and drawing in Creo as part of a change order
10:10 Load window warning showing that later issues of components are available
11:25 Using the Replace In Manager
11:35 Setting permissions for users to replace into ‘Released’ assemblies
13:10 Referencing up-issued items back to the project folder
14:20 Closing a change order
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4https://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=75shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=110shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=150shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=190shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=250shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=345shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=375shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=610shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=685shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=695shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=790shttps://www.youtube.com/watch?v=lbs1ql_kCSs&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=4&t=860s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
13
DDM Tutorials (Creo Parametric) - Step 5:Copying Models and Drawings and Renaming
1:15 Creating new ‘as hoc’ dividers in a folder
2:00 Creating a copy of an existing assembly using ‘Save-As’
6:20 Moving items in a folder to a divider
6:55 Renaming items
https://www.youtube.com/watch?v=c1IJWiAEBt4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=5https://www.youtube.com/watch?v=c1IJWiAEBt4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=5&t=75shttps://www.youtube.com/watch?v=c1IJWiAEBt4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=5&t=120shttps://www.youtube.com/watch?v=c1IJWiAEBt4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=5&t=380shttps://www.youtube.com/watch?v=c1IJWiAEBt4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=5&t=415s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
14
DDM Tutorials (Creo Parametric) - Step 6:Working with Creo Family tables
0:50 Storing family table generic models to DDM
1:50 Storing family table instances to DDM
3:25 Viewing family table relationships in DDM
4:45 Changing the lifecycle state of family table items
5:25 Adding a new instance to an existing item in DDM
6:40 Saving a new instance back to DDM
7:50 Up-issuing family table items
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6https://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6&t=50shttps://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6&t=110shttps://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6&t=205shttps://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6&t=285shttps://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6&t=325shttps://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6&t=400shttps://www.youtube.com/watch?v=LEToc3Dr5-4&list=PLuDSZkYuTH6klO6Db3kbagkZ3wK02a-qL&index=6&t=470s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
15
0:30 Starting the Solid Edge integration with DDM
1:15 Configuring the Integration
1:55 Configuring the Solid Edge Quick Access Toolbar
4:10 Configuring DDM options when working with Solid Edge
5:10 Calling DDM from Solid Edge
6:00 Configuring the Pathfinder in Solid Edge
7:05 The DDM ‘working’ directory
8:40 Disabling the ‘Saving to DDM will close and re-open..’ message
DDM Tutorials (Solid Edge) - Step 1:Understanding & Configuring the CAD Integration between DDM & Solid Edge
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=30shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=75shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=115shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=250shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=310shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=360shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=425shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1&t=520shttps://www.youtube.com/watch?v=l9zD1G_6FVQ&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
16
DDM Tutorials (Solid Edge) - Step 2:Creating Solid Edge Parts, Assemblies and Drawings
00:35 Pinning and unpinning a folder, setting the current working folder
01:40 Creating a Solid Edge part and storing it to DDM
03:10 Assigning a part number, description and category
03:55 Choosing a folder to save to, current working folder prompts
06:30 Creating neutral file formats, e.g. STEP files
08:15 Using ‘Send To’ to export data from DDM
08:50 Loading specific file versions
09:35 Creating a Solid Edge drawing and storing it to DDM
11:05 Creating neutral file formats, e.g. DXF files
12:15 Creating a search favourite
14:00 Creating a Solid Edge assembly (load sub-part) and storing it to DDM
19:55 Examining product structure in DDM
21:10 Reserving items back to the project folder
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2https://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=35shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=100shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=190shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=235shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=390shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=495shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=530shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=575shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=665shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=735shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=840shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=1195shttps://www.youtube.com/watch?v=DGa0xwdrlM4&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=2&t=1270s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
17
DDM Tutorials - Step 3:BOM Management and the Release Manager
00:35 Viewing the product structure in DDM
00:50 DDM BOM editor
01:20 Showing the BOM as a Bill of Quantity
02:15 Configuring columns in the BOM editor window
03:25 Setting position numbers and ordering the BOM
04:25 Hiding items not required on the BOM
05:25 Modifying quantities in the BOM
06:50 Adding items to the BOM
07:40 Linking documents to part records
10:10 Exporting the BOM to Excel
10:50 Viewing BOM reports
11:10 Using the Release Manager
13:35 Changing lifecycle state using a folder action and workflow
13:55 Creating a folder action
14:10 Reserving items into a folder/folder action
15:30 Moving a folder/folder action through a workflow
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=3https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=35shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=50shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=80shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=135shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=205shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=265shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=325shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=410shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=460shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=610shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=650shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=670shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=815shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=835shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=850shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=930s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
18
DDM Tutorials (Solid Edge) - Step 4:Change Orders and Up Issuing Models and Drawings
01:00 Raising a Change Order
02:15 Customising DDM toolbars
02:55 Reserving affected items for change to the change order folder
03:25 Sending the change order folder forward in the workflow
04:30 Automatically created change order tasks
05:40 Re-assigning work
06:00 Up-issuing a model and drawing in Solid Edge as part of a change order
10:35 Load window warning showing that later issues of components are available
11:10 Using the Replace In Manager
11:35 Setting permissions for users to replace into ‘Released’ assemblies
13:15 Referencing up-issued items back to the project folder
14:40 Closing a change order
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4https://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=60shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=135shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=175shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=205shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=270shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=340shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=360shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=635shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=670shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=695shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=795shttps://www.youtube.com/watch?v=p4pZoVGvGrE&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=4&t=880s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
19
DDM Tutorials (Solid Edge) - Step 5:Copying Models and Drawings and Renaming
1:10 Creating new ‘as hoc’ dividers in a folder
2:20 Creating a copy of an existing assembly using ‘Single Save’
7:15 Moving items in a folder to a divider
7:45 Renaming items
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=ALSOwE5MzKU&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=5https://www.youtube.com/watch?v=ALSOwE5MzKU&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=5&t=70shttps://www.youtube.com/watch?v=ALSOwE5MzKU&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=5&t=140shttps://www.youtube.com/watch?v=ALSOwE5MzKU&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=5&t=435shttps://www.youtube.com/watch?v=ALSOwE5MzKU&list=PLuDSZkYuTH6nX27qSCmqDi8ZhCKToqwSe&index=5&t=465s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
20
0:30 Starting the Inventor integration with DDM
1:40 Configuring the Integration
2:40 Configuring the Inventor Quick Access Toolbar
3:50 Configuring DDM options when working with Inventor
5:05 Calling DDM from Inventor
6:40 The DDM ‘working’ directory
DDM Tutorials (Inventor) - Step 1:Understanding & Configuring the CAD Integration between DDM & Inventor
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=USfIIy0VU7I&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=1&t=30shttps://www.youtube.com/watch?v=USfIIy0VU7I&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=1&t=100shttps://www.youtube.com/watch?v=USfIIy0VU7I&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=1&t=160shttps://www.youtube.com/watch?v=USfIIy0VU7I&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=1&t=230shttps://www.youtube.com/watch?v=USfIIy0VU7I&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=1&t=305shttps://www.youtube.com/watch?v=USfIIy0VU7I&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=1&t=400shttps://www.youtube.com/watch?v=USfIIy0VU7I&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
21
DDM Tutorials (Inventor) - Step 2:Creating Inventor Parts, Assemblies and Drawings
00:20 Pinning and unpinning a folder, setting the current working folder
01:40 Creating an Inventor part and storing it to DDM
02:30 Assigning a part number, description and category
03:05 Choosing a folder to save to, current working folder prompts
04:40 Modifying a part already stored to DDM
06:50 Loading specific file versions
07:35 Creating an Inventor drawing and storing it to DDM
08:50 Creating neutral file formats, e.g. DXF files
10:10 Creating a search favourite
11:15 Creating an Inventor assembly (load sub-part) and storing it to DDM
14:55 Examining product structure in DDM
16:20 Reserving items back to the project folder
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2https://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=20shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=100shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=150shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=185shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=280shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=410shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=455shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=530shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=610shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=675shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=895shttps://www.youtube.com/watch?v=nGwg_e54eEY&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=2&t=980s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
22
DDM Tutorials - Step 3:BOM Management and the Release Manager
00:35 Viewing the product structure in DDM
00:50 DDM BOM editor
01:20 Showing the BOM as a Bill of Quantity
02:15 Configuring columns in the BOM editor window
03:25 Setting position numbers and ordering the BOM
04:25 Hiding items not required on the BOM
05:25 Modifying quantities in the BOM
06:50 Adding items to the BOM
07:40 Linking documents to part records
10:10 Exporting the BOM to Excel
10:50 Viewing BOM reports
11:10 Using the Release Manager
13:35 Changing lifecycle state using a folder action and workflow
13:55 Creating a folder action
14:10 Reserving items into a folder/folder action
15:30 Moving a folder/folder action through a workflow
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=3https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=35shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=50shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=80shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=135shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=205shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=265shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=325shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=410shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=460shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=610shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=650shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=670shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=815shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=835shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=850shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=930s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
23
DDM Tutorials (Inventor) - Step 4:Change Orders and Up Issuing Models and Drawings
01:05 Raising a Change Order
01:50 Customising DDM toolbars
02:50 Reserving affected items for change to the change order folder
03:25 Sending the change order folder forward in the workflow
04:35 Automatically created change order tasks
06:00 Re-assigning work
06:50 Up-issuing a model and drawing in Inventor as part of a change order
10:05 Using the Replace In Manager
11:10 Setting permissions for users to replace into ‘Released’ assemblies
12:20 Referencing up-issued items back to the project folder
12:45 Closing a change order
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4https://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=65shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=110shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=170shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=205shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=275shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=360shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=410shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=605shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=670shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=740shttps://www.youtube.com/watch?v=kuVqlUV_9KM&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=4&t=765s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
24
DDM Tutorials (Inventor) - Step 5:Copying Models and Drawings, Renaming and Replacing
1:00 Creating new ‘ad hoc’ dividers in a folder
1:55 Creating a copy of an existing assembly using ‘Save-As’
5:25 Moving items in a folder to a divider
6:00 Renaming items
9:10 Replacing function
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=t1tZgGUXKco&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=5https://www.youtube.com/watch?v=t1tZgGUXKco&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=5&t=60shttps://www.youtube.com/watch?v=t1tZgGUXKco&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=5&t=115shttps://www.youtube.com/watch?v=t1tZgGUXKco&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=5&t=325shttps://www.youtube.com/watch?v=t1tZgGUXKco&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=5&t=360shttps://www.youtube.com/watch?v=t1tZgGUXKco&list=PLuDSZkYuTH6n6O4JoHbcyygqL-r0cxZtR&index=5&t=550s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
25
0:30 Starting the IronCAD integration with DDM
1:10 Configuring the Integration
2:00 Configuring the IronCAD Quick Access Toolbar
4:20 Calling DDM from IronCAD
5:00 Configuring DDM options when working with IronCAD
6:15 Configuring the Scene Browser in IronCAD
6:55 The DDM ‘working’ directory
DDM Tutorials (IronCAD) - Step 1:Understanding & Configuring the CAD Integration between DDM & IronCAD
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1&t=30shttps://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1&t=70shttps://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1&t=120shttps://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1&t=260shttps://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1&t=300shttps://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1&t=375shttps://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1&t=415shttps://www.youtube.com/watch?v=r5nWTsxJ5UU&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
26
DDM Tutorials (IronCAD) - Step 2:Creating IronCAD Parts, Assemblies and Drawings
00:40 Pinning and unpinning a folder, setting the current working folder
01:25 Creating a IronCAD part and storing it to DDM
02:20 Assigning a part number, description and category
02:45 Choosing a folder to save to, current working folder
04:30 Creating neutral file formats, e.g. STEP files
06:00 Loading specific file versions
06:30 Creating a IronCAD drawing and storing it to DDM
07:40 Creating neutral file formats, e.g. DXF files
08:35 Creating a search favourite
09:40 Handling IronCAD part and assembly scene files in DDM
12:55 Creating a IronCAD assembly (load sub-part) and storing it to DDM
18:15 Examining product structure in DDM
18:50 Reserving items back to the project folder
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2https://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=40shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=85shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=140shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=165shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=270shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=360shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=390shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=460shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=515shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=580shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=775shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=1095shttps://www.youtube.com/watch?v=QXWKsTQcaCg&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=2&t=1130s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
27
DDM Tutorials - Step 3:BOM Management and the Release Manager
00:35 Viewing the product structure in DDM
00:50 DDM BOM editor
01:20 Showing the BOM as a Bill of Quantity
02:15 Configuring columns in the BOM editor window
03:25 Setting position numbers and ordering the BOM
04:25 Hiding items not required on the BOM
05:25 Modifying quantities in the BOM
06:50 Adding items to the BOM
07:40 Linking documents to part records
10:10 Exporting the BOM to Excel
10:50 Viewing BOM reports
11:10 Using the Release Manager
13:35 Changing lifecycle state using a folder action and workflow
13:55 Creating a folder action
14:10 Reserving items into a folder/folder action
15:30 Moving a folder/folder action through a workflow
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=3https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=35shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=50shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=80shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=135shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=205shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=265shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=325shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=410shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=460shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=610shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=650shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=670shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=815shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=835shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=850shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=930s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
28
DDM Tutorials (IronCAD) - Step 4:Change Orders and Up Issuing Models and Drawings
01:10 Raising a Change Order
02:25 Customising DDM toolbars
03:00 Reserving affected items for change to the change order folder
03:40 Sending the change order folder forward in the workflow
04:40 Automatically created change order tasks
05:55 Re-assigning work
06:40 Up-issuing a model and drawing in IronCAD as part of a change order
11:10 Using the Replace In Manager
12:20 Setting permissions for users to replace into ‘Released’ assemblies
13:40 Load window warning showing that later issues of components are available
14:30 Referencing up-issued items back to the project folder
14:50 Closing a change order
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4https://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=70shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=145shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=180shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=220shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=280shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=355shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=400shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=670shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=740shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=820shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=870shttps://www.youtube.com/watch?v=vc0rVTcmong&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=4&t=890s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
29
DDM Tutorials (IronCAD) - Step 5:Copying Models and Drawings and Renaming
1:20 Creating new ‘as hoc’ dividers in a folder
2:05 Creating a copy of an existing assembly using ‘Save-As’
6:15 Moving items in a folder to a divider
6:50 Renaming items
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=l7ST9GeA8jM&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=5https://www.youtube.com/watch?v=l7ST9GeA8jM&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=5&t=80shttps://www.youtube.com/watch?v=l7ST9GeA8jM&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=5&t=125shttps://www.youtube.com/watch?v=l7ST9GeA8jM&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=5&t=375shttps://www.youtube.com/watch?v=l7ST9GeA8jM&list=PLuDSZkYuTH6lAdH3m8pvFeS-AjuZPbhVw&index=5&t=410s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
30
0:30 Starting the AutoCAD integration with DDM
1:10 Configuring the Integration
1:55 Configuring DDM options when working with AutoCAD
3:10 Calling DDM from AutoCAD
4:50 The DDM ‘working’ directory
DDM Tutorials (AutoCAD) - Step 1:Understanding & Configuring the CAD Integration between DDM & AutoCAD
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=Nj0a7_rGiBo&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=1&t=30shttps://www.youtube.com/watch?v=Nj0a7_rGiBo&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=1&t=70shttps://www.youtube.com/watch?v=Nj0a7_rGiBo&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=1&t=115shttps://www.youtube.com/watch?v=Nj0a7_rGiBo&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=1&t=190shttps://www.youtube.com/watch?v=Nj0a7_rGiBo&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=1&t=290shttps://www.youtube.com/watch?v=Nj0a7_rGiBo&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
31
DDM Tutorials (AutoCAD) - Step 2:Creating AutoCAD Drawings
0:30 Pinning and unpinning a folder, setting the current working folder
1:30 Creating a AutoCAD drawing and storing it to DDM
1:50 Assigning a drawing number, description and category
2:20 Choosing a folder to save to, current working folder prompts
5:40 Loading specific file versions
6:20 Using ‘Send To’ to export data from DDM
6:45 Creating a search favourite
8:05 Reserving items back to the project folder
9:00 Clearing items from your Workbench
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2https://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=30shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=90shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=110shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=140shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=340shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=380shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=405shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=485shttps://www.youtube.com/watch?v=Ne-QGYn2nKM&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=2&t=540s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
32
DDM Tutorials - Step 3:BOM Management and the Release Manager
00:35 Viewing the product structure in DDM
00:50 DDM BOM editor
01:20 Showing the BOM as a Bill of Quantity
02:15 Configuring columns in the BOM editor window
03:25 Setting position numbers and ordering the BOM
04:25 Hiding items not required on the BOM
05:25 Modifying quantities in the BOM
06:50 Adding items to the BOM
07:40 Linking documents to part records
10:10 Exporting the BOM to Excel
10:50 Viewing BOM reports
11:10 Using the Release Manager
13:35 Changing lifecycle state using a folder action and workflow
13:55 Creating a folder action
14:10 Reserving items into a folder/folder action
15:30 Moving a folder/folder action through a workflow
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=3https://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=35shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=50shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=80shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=135shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=205shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=265shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=325shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=410shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=460shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=610shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=650shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=670shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=815shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=835shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=850shttps://www.youtube.com/watch?v=kofHQvmBxvw&list=PLuDSZkYuTH6ntOBSaLvqAodo8GS_hHxrO&index=3&t=930s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
33
DDM Tutorials (AutoCAD) - Step 4:Change Orders and Up Issuing Drawings
01:00 Raising a Change Order
02:25 Customising DDM toolbars
03:00 Reserving affected items for change to the change order folder
03:45 Sending the change order folder forward in the workflow
05:10 Automatically created change order tasks
06:15 Re-assigning work
06:45 Up-issuing a drawing in AutoCAD as part of a change order
10:40 Referencing up-issued items back to the project folder
11:00 Closing a change order
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4https://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=60shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=145shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=180shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=225shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=310shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=375shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=405shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=640shttps://www.youtube.com/watch?v=VI87a5NSv5s&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=4&t=660s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
34
DDM Tutorials (AutoCAD) - Step 5:Copying Drawings and Renaming
1:05 Creating new ‘as hoc’ dividers in a folder
2:05 Moving items in a folder to a divider
2:15 Creating a copy of an existing assembly using ‘Save-As’
3:45 Renaming items
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=0eoW1juDbPs&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=5https://www.youtube.com/watch?v=0eoW1juDbPs&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=5&t=65shttps://www.youtube.com/watch?v=0eoW1juDbPs&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=5&t=125shttps://www.youtube.com/watch?v=0eoW1juDbPs&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=5&t=135shttps://www.youtube.com/watch?v=0eoW1juDbPs&list=PLuDSZkYuTH6kdvlvkMRImEki_TS8DaYT9&index=5&t=225s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
35
00:25 Logging into DDM, logging out/closing DDM
01:05 Changing user password
01:20 Primary attributes in the search results
Searching
02:05 Search types ‘Free Search’
02:30 Search criteria ‘Free Search’
04:55 Search criteria ‘Simple Search’
06:20 Search criteria ‘Advanced Search’
10:30 Searching folders ‘Free Search’
11:05 Searching folders (Advanced Search)
08:30 Previewing drawings (PDF Preview) and Models
09:10 Configuring client viewing applications
09:25 Browsing structure relations and identifying ‘where used’
11:35 Customising and configuring the search results
12:30 Category Browser – searching by Category
Client Options
13:45 Searches; ‘Run search immediately when changing search type’
14:40 Prompts; ‘Would you like to clear your search results now’
15:30 Start-up; ‘Default Start-up Search Mode’
DDM Tutorials (DDM Office) - Step 1:Logging in and searching
DDM Office
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=25shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=65shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=80shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=125shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=150shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=295shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=380shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=630shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=665shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=510shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=550shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=565shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=695shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=750shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=825shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=880shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1&t=930shttps://www.youtube.com/watch?v=SXQnnOEitaw&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
36
DDM Tutorials (DDM Office) - Step 2:Document Lifecycle Management
00:40 Importing a document to DDM from the file system
00:55 Assigning a number, description and category
02:10 Selecting a folder to save into (Workbench)
03:50 'My Workbench’, ‘My Recent Items’, reserved items and modify permissions
04:50 Editing a document
05:10 Saving changes back to DDM
05:55 Changing a document’s lifecycle state
07:25 Viewing a document’s properties
08:10 Up-issuing a ‘Released’ document
09:45 Adding change notes
10:45 Understanding the ‘Under Review’ lifecycle state
11:35 Understanding the ‘Superseded’ lifecycle state
12:40 Creating a new document from an existing document in DDM
14:40 ‘Send to’, exporting documents out of DDM
DDM Office
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2https://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=40shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=55shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=130shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=230shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=290shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=310shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=355shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=445shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=490shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=585shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=645shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=695shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=760shttps://www.youtube.com/watch?v=jwxlEuOIOSY&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=2&t=880s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
37
DDM Tutorials (DDM Office) - Step 3:Working with Folders
00:30 Introducing Project folders
01:25 Pinning folders, ‘My Pinned Folders’
02:05 Saving documents into a project folder
03:50 Understanding item ownership (modification rights) in group owned folders
05:05 Reserving an item back to a project folder to allow collaboration
06:10 Folder properties, opening a folder in its own window
07:00 Assigning a project folder to a user and returning to group ownership
08:20 Understanding which folders and item is reserved or reference to
08:55 Referencing documents to a folder
09:55 Moving items into a folder divider
10:50 Moving items from one folder to another
DDM Office
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3https://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=30shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=85shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=125shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=230shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=305shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=370shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=420shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=500shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=535shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=595shttps://www.youtube.com/watch?v=rlH1fXReZ9Q&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=3&t=650s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
38
DDM Tutorials (DDM Office) - Step 4:Formal Approvals using Folder Actions
0:35 Introducing folder actions
2:10 Raising a folder action
2:55 Pinning a folder action
3:10 Reserving a document(s) into a folder action
3:55 Opening the properties of an approval folder
4:10 Approval folder action workflow
4:25 Sending the document for checking (workflow)
6:35 Workflow decision steps
8:25 Document history and audit trail entries
DDM Office
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4https://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=35shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=130shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=175shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=190shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=235shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=250shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=265shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=395shttps://www.youtube.com/watch?v=v8hzVUZjm2w&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=4&t=505s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
39
DDM Tutorials (DDM Office) - Step 5:Creating New Folders, Subscriptions, Renaming & Deletion
00:35 Creating a new folder (project folder)
02:15 Folder sent to workflow on creation
03:15 Enabling or disabling DDM prompts
03:55 Importing multiple documents
06:10 Renaming a document
07:00 Converting an item from the Document class to the Drawings class
07:35 Deleting items from DDM
08:45 Adding an email document to DDM
10:45 Creating and organising search favourites
13:00 Setting query limits
14:10 Subscriptions
DDM Office
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5https://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=35shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=135shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=195shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=235shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=370shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=420shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=455shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=525shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=645shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=780shttps://www.youtube.com/watch?v=klU4An-8y8U&list=PLuDSZkYuTH6lBTd2GqSCZN1fSh_LQEjtz&index=5&t=850s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
40
00:30 Logging into DDM Administration
00:50 Adding a new user account
04:20 Managing a user account
05:35 Groups and access controls
06:45 Creating new groups and configuring access controls
07:05 Creating and configuring access controls on a new lifecycle state
21:50 Profiles (default user settings)
23:10 General recommendations
DDM Tutorials (DDM Admin) Configuring System Access
DDM Admin
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=30shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=50shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=260shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=335shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=405shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=425shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=1310shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1&t=1390shttps://www.youtube.com/watch?v=IAoU2iPDYxs&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=1
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
41
DDM Tutorials (DDM Admin) Configuring Custom Attributes and the Category Browser
00:25 Understanding custom attributes
01:25 Creating custom attributes
05:10 Custom attributes locked to category browser
07:00 Making category a compulsory attribute
07:30 Dealing with reserved attribute names
08:25 Adding categories through DDM Admin
09:35 Attribute colour rules
11:50 Attribute validation
13:05 Category managers and category administrators (system groups)
14:50 Configuring Bill of Materials attributes
DDM Admin
***Clicking on the tutorial title will take you to that video in YouTube. Clicking on the individual timestamps will take you that point in the tutorial in YouTube.
Clicking on DDM logo will take you back to the contents page.
https://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2https://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=25shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=85shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=310shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=420shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=450shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=505shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=575shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=710shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=785shttps://www.youtube.com/watch?v=3y7ohE7JvNE&list=PLuDSZkYuTH6kbUMm8KlUZh_2-J-NMf8Ai&index=2&t=890s
-
www.designdatamanager.comRef: DOC-00008567 Issue: 1
DDM Tutorials Video Index |
42
DDM Tutorials (DDM Admin) Auto-number Administration
00:40 Enabling auto-numbering in DDM Admin
01:15 Creating a new numbering rule for parts/assemblies, documents & drawings
03:00 Setting a default numbering rule for parts/assemblies, documents & drawings
04:05 Creating a new numbering rule for folders
04:30 Selecting and setting a default numbering rule for folders
05:20 Free text numbering (user defined or manual number)