TTBC INFRASTRUCTURE CONSTRUCTION AND TRADE JOINT STOCK COMPANY Contact information Address: Pho Quang, ward 2, Tan Binh district, Ho Chi Minh city. Telephone: Fax: +84 Business fields Manufacturers wood pellets Export and import activities. Business Lighting System, cooperation with the National Lighting Company of Korea At present, TTBC is promoting the export of compression wood pieces (8mm) Compresson wood pieces are now commonly used in both civil and industrial sectors as firewood for furnaces,steam boilers in industrial plant, thermoelectric plant, etc. Compression wood pieces are made from wood of rubber trees, cajuput trees, etc which are crushed finely and compressed into each piece of 8mm. Characteristics of compression wood pieces High Calorific value (dry basic): 4,500 4,700 kcal Ash content: 0.9 1.8% Moisture content: 5 10% Test reports and certificates of compression wood pieces Characteristics of compression wood pieces When being burnt, our products produce a huge quanity of heat, little ash percentage and especially no smokes and do not cause environmental pollution. Compression wood pieces is gradually replacing fossil coal, gas and oil in the future. Compression wood pieces are increasingly used by European countries and Nothern Asian countries including Korea Reasons for the development of compression wood pieces Inscreasingly strict regulations on environment protection leads to the development of environment-friendly products like compression wood pieces. High practicicability for the use in daily life and industrial sectors of compression wood pieces. Advantages for the development of compression wood pieces Abundant materials sources for production Southern Vietnam area is near equator and sea, then its climate is favorable for planting rubber trees, cajeput trees, acassia trees, etc. which are mainly input materials for the production of compression wood products. Vietnam is one of the worlds leading countries in planting rubber trees. At present, rubber trees planted in the 90s are fully exploited and be cut down, therefore, this is one of the most plentiful sources of materials. Waste materials from wood processing factories. TTBC Compression Wood Production Factory TTBC built a compression wood production factory with 5 compression machines in Binh Duong Province, VietNam TTBC Compression Wood Production Factory Capacity: 4,000 ton/month TTBC Compression Wood Production Factory Some images of materials and production activity Some images of machines and factory Images of some factories Some images of finished products Future Cooperation At present, many factories are established in Vietnam which can satisfy your demand for compression wood products. TTBCs capacity is 4,000 ton/month and we can collect at least additional 5,000-10,000 ton/month of compression wood products to supply for you. Future Cooperation TTBC also have good relationship with many factories in this sector. Together we can satisfy your demand in terms of quantity and quality on the condition of TT or L/C payment. TTBC is looking forward to our cooperation. Contact person NG QUANG BNH (MR.) Director General TTBC INFRASTRUCTURE CONSTRUCTION AND TRADE JOINT STOCK COMPANY Add: Ph Quang Street, Tan Binh District, HCM CiTy Cell: Fax: Phone: THANK YOU FOR YOUR ATTENTION