TSDF OPERATIONAL CONCERNS

BY

CH. SRINIVASA REDDY

OPERATIONS & TECH. HEAD

TAMILNADU WASTE MANAGEMENT LTD.

TNWML REGULAR ACTIVITIES • COLLECTION & TRANSPORTATION

• TREATMENT

• STORAGE

• DISPOSAL OF HAZARDOUS WASTE

TNWML ACTIVITIES

TNWML CONCERNS

Industries are sending two or more wastes mixed

together.

Industries are loading the waste without proper label.

Industries are sending the slurry wastes in open

condition and it leads to spillages while

transportation.

Industries are sending the TREM CARD along with

vehicle but it is not properly filling.

TNWML CONCERNS

Waste receiving in Corroded drums

Waste loading in the vehicle haphazardly

The photos of the same can be seen in the below slides

WASTE MIXING PHOTOS

Mixing of one or more wastes together, it leads to

compatibility problems and segregation problems

WASTE SLURRY CONDITION PHOTOS

Wastes receiving in slurry condition, it leads to spillages

during transportation

CORRODED DRUMS PHOTOS

Waste receiving in corroded drums, due to this TNWML not able to unload and

store the waste in proper condition in the Sheds.

HAPHAZARD WASTE LOADING PHOTOS

Waste drums are loading in to the vehicle in haphazard manner,

due to this TNWML not able to Unload the waste properly.

TREM CARD (FORM-11) NOT FILLED PROPERLY

TREM CARD not filling properly while sending the waste, But as

per HW Rules it should be filled properly and carried along

with the vehicle

WASTE SENDING WITHOUT LABEL

Waste receiving without label, but as per HW Rules all the

waste drum/bag should be labeled.

INDUSTRY DO’S AND DON'TS

TNWML collecting and transporting of Hazardous

waste from industries for treatment and safe

disposal.

TNWML also required industry support to transport

and dispose the hazardous waste Safely and

smoothly.

INDUSTRY DO’S

INDUSTRY Do’s:

Hazardous waste shall be labeled properly as per HW rules.

Industry shall submit properly filled TREM CARD (Form-11 as per

HW rules) along with vehicle

Industry shall load only one type of waste in the vehicle

Industry shall get the comprehensive analysis done before

sending the waste for disposal.

INDUSTRY DO’S

INDUSTRY Do’s:

Industry has to load the waste which is in solid form and

should not load the semi solid or liquid in open condition

Industry shall fill the liquid waste in drums and properly

closed drums should load in the vehicle and drums

should be in good condition.

Each drum/Bag of Hazardous waste shall be labeled as

per Form-12 HW rules.

INDUSTRY DON'TS

INDUSTRY DONT’S :

Waste should not send with out valid comprehensive analysis

report

Waste should not send without proper label

Corroded drums should not load in the vehicle.

Corroded drums should not load in the vehicle.

Waste should not send without label.

Slurry waste should not load in the vehicles in loose condition.

Two types of Wastes should not mixed together

Thank you