Trs 9500mpr _mss 1-4-8_r4.2 for Djezzy

8/10/2019 Trs 9500mpr _mss 1-4-8_r4.2 for Djezzy

http://slidepdf.com/reader/full/trs-9500mpr-mss-1-4-8r42-for-djezzy 1/15

Customer's logo

This document must be used according to the instructions given in the Line-up and Commissioning Chapter

of the corresponding 9500MPR_MSS 1-4-8 User Manual

Link ID :

Site A User Label :

Site B User Label :

Configuration :

Date :

X

x

3DB 19084 AAAA Test Result Sheet for Site Acceptance Test Procedure of 9500MPR

Reference documents

Contract reference

Status

Version date : 01/15/12

Creation

Extension

Alcatel-Lucent 9500MPRMicrowave packet radio links

9500 MPR MSS 1-4-8

Test Result Sheet

9500MPR MSS 1-4-8 User Manual

Object :

This document is used during the equipment commissioning and acceptance phases.

Date and signature(s)Company

Alcatel-Lucent

Name(s)

Ref.

Appraisal Djezzy

Originator

3DB 19084 AAAAVersion number : 01



Customer's logo

2 Change History

3. Process(How to use this document)

4 Visual Inspection 5

5 MSS 1/4/8 Parameterization

6.1 Tests & Measurement

6.2 Tests & Measurement ASAP and AUX

7. Loopback

8. Acceptance

9.1 Screenshots

9.2 Hop stability test results

10.1 NE Current Config file

10.2 NE Remote Inventory

11. Blank Tab


8

9

10

12

11

4

7

3

13

14

15

16



Customer's logo

Site Name 0

0

OK NOK

OK NOK

OK NOK

OK NOK

OK NOK

Position and connection OK NOK

OK NOK

OK NOK

MSS-4/8 cards installed per site documentation OK NOK NA

Power bar installation OK NOK NA

OK NOK

OK NOK NA

OK NOK NA

OK NOK NA

MPT Power Unit OK NOK NA

MPT Extended Power Unit OK NOK NA

Power injector box or plug-in OK NOK NA

Pigtail presence OK NOK NA

Low Pass Filter and Lighting Arrestor presence OK NOK NA

OK NOK

Power supply protection circuit breakers values

IDU Power supply wiring

Site left clean & tidy

Ethernet cabling and labelling on DDF

Rack allocation according to station layout

MSS and cables labelling

Unused slots have blank plates installed

TRU and other power supply distributor

4. Visual InspectionIndoor installation visual inspection check

Tributary E1 cabling and labelling on DDF

Tributary ATM/IMA cabling and labelling on DDF

Rack and Subrack ground connections

Comment

MSS allocation according to station layout



OK NOK

OK NOK

OK NOK

OK NOK NA

OK NOK

OK NOK NA

OK NOK NA

Elliptic Flex. NA

OK NOK

OK NOK

OK NOK

OK NOK

OK NOK

OK NOK NA

OK NOK NA

OK NOK

OK NOK

4+0 Coupler OK NOK NA

Antenna Diameter Antenna 1 / Antenna 2

Antenna Azimuth Antenna 1 / Antenna 2

Polarization Vertical Horizontal


Comment

ODU/MPT grounding

IDU/ODU lightning surge suppressors

Antenna(s) diameter according to plant doc.

Antenna sway bar well positioned (if used)

Flange connection (not integrated antenna only)

Power Extractor and grounding presence

Waveguide type

ODU/MPT and pole mounting according to plant doc.

Antenna(s) grounding

ODU/MPT tightening

Antenna(s) polarization according to plant doc.

IDU/ODU cable(s) grounding

ODU/MPT cable tightening

ODU/MPT cable protection weatherproofing

Antenna(s) EMF warning labelling presence

Antenna(s) position according to plant doc.

Outdoor installation visual inspection check

Cables & connectors tested if done one the field

IDU/ODU cable(s) length (m)



Customer's logo

2 hours error free BER check on one tributary or one Ethernet port OK NOK NA

OK NOK NA

OK NOK NA

Yes No Value

XPD Value - Horizontal (dB) NA

XPD Value - Vertical (dB) NA

OK NOK NA OK NOK NA

OK NOK NA OK NOK NA

OK NOK NA OK NOK NA

OK NOK NA OK NOK NA

OK NOK NA OK NOK NA

OK NOK NA OK NOK NA

OK NOK NA OK NOK NA

OK NOK NA


Point-to-point BER loop test (1min each)

SDHACC Protection (STM-1)

P32E1 Protection

Radio protection

Access Interfaces

HSB Tx protection

Protection to main

Main to protection

Channel protection switching (1+1 only) MSS4/8

Power Level Check ( ODU 300, MPT-HC, MPT MC, AWY )

Protection

6.1 Link Tests and Measurement

Main

Calculated Rx level (dBm) (from link budget)

Rx level reading (dBm)

Link Stability Check ( ODU 300, MPT-HC, MPT MC, AWY )

2 hours error free stability test on SMT-1 port

Tx power value (dBm)

2 hours error free stability test on User ports (Ethernet)

Checking for interference signal

EPS protection

Main to protection

ERPS

Radio protection

Protection to main

Core Board

RPL Blocking

Protection to main

RPL unblocking

Main to protection

Ethernet ports test



Customer's logo

OK NOK NA

OK NOK NAOK NOK NA

OK NOK NA

OK NOK NA

OK NOK NA

OK NOK NA

OK NOK NA


Output External points

Input External points

10 min error free BER stability

64 Kbit/s Service channel MSS-1/4/8

Check/Set IMA layer configurationCheck/Set ATM layer configuration

16 E1/DS1 ASAP unit MSS-1/4/8

Check/Set E1 layer configuration

6.2 Link Tests and Measurement ASAP and AUX

Check/Set ATM PW layer configuration

ATM traffic Stability Test MSS-1/4/8

Housekeeping Configuration

2 hours error free ATM stability



7 Link Tests and Measurement loopback

OK NOK NA

OK NOK NA

CoreFacing RadioFacing

OK NOK OK NOK NA

OK NOK OK NOK NA

Loopback Functionality ODU Cable OK NOK NA

Loopback Functionality ODU RF OK NOK NA

3DB 19084 AAAA Test Result Sheet for Site Acce tance Test Procedure of 9500MPR

MPT CH1

MPT CH0

ODU AWY

ODU 300 MSS 1/4/8

MPT HC/MC MSS 1/4/8

IF loopback - CH0

IF loopback - CH1



Customer's logo

Acceptance result Pending point severity

Pending actions and comments


Accepted without pending point

Accepted with pending point

Refused

Major

Minor

#REF!

Documents attached

Hob stability test result print out

Link budget

Name, Date & Signature Name, Date & Signature

Customer representative Alcatel Lucent representative

8. Acceptance




9.1 Screenshots

Paste here a screenshot of the WebEML showing : Rx power level, configuration synthesis, and that there is no

current alarm


http://slidepdf.com/reader/full/trs-9500mpr-mss-1-4-8r42-for-djezzy 12/153DB 19084 AAAA Test Result Sheet for Site Acceptance Test Procedure of 9500MPR

10.1 NE Current config view

#REF!

- Page 1 - - Page 2 -

Paste here the Current conf view extracted from NE. If the file does not fit in the first column, use the

second column


http://slidepdf.com/reader/full/trs-9500mpr-mss-1-4-8r42-for-djezzy 13/153DB 19084 AAAA Test Result Sheet for Site Acceptance Test Procedure of 9500MPR

10.2 NE Remote Inventory file

#REF!

- Page 1 - - Page 2 -

Paste here the Remote Inventory file extracted from NE. If the file does not fit in the first column, use the

second column



Site

To/From

Tester

Equipment ID

11. Blank Tab

Trs 9500mpr _mss 1-4-8_r4.2 for Djezzy

Documents

Transcript of Trs 9500mpr _mss 1-4-8_r4.2 for Djezzy