TROSEAL FLEXI
2
*Product properties are typically averages, obtained under laboratory conditions. Reasonable variations can be expected on-site due to local factors, including environment, preparation, application, curing and test methods. TROSEAL BUILDING MATERIALS PTE LTD TROSEAL FLEXI 2 Parts Cementitious Waterproofing System Troseal Flexi is a 2-part acrylic cementitious waterproofing system. It reacts chemically after mixing to form a hard & elastic film which bonds tenaciously to most concrete/ substrate to protect against possible ingress of water. Troseal Flexi can receive direct plastering or screed without affecting bond. Marbles and tiles can fix directly onto Troseal Flexi with most type of adhesive with most type of adhesives, fill voids, cracks, edges and angle. Troseal Flexi is suitable for repair material, so make sure that the surface is sound, even and clean. Techinical Data Advantages Environment-friendly, non-toxic, harmelss & safe High bonding strength Bonds firmly with many types of mortar substrate Can be applied on wet & dry substrate directly Can be applied on vertical, slope and top surface directly; no flow, easy to use Good weather resistance, it can be applied on the outdoor roof without special protective layer (normal protective layer is needed) • • • • • • Area of Application Suitable for dry and non long-term immersion environment, e.g. Roof • Put on a pair of safety goggles and gloves during use Do not walk on the film until it becomes dry, then apply protection layer Don’t construt under 5 o C or in rain, snow or sand days Store in room temperature around 0 - 30 o C in cool & well-ventilated place Keep containers sealed, closed when not in used Note: Surface skin may occur even in unopened containers Shelf life is around 1 year when unopen Storage Safety Cautions Keep dry and do not expose directly to sun & rain, and colliding during transportation Use it up within two hours after mixing TROSEAL FLEXI Packaging Powder: 12 kg , Liquid: 10 kg Approximate 0.9 to 1.0kg/m² per coat required • • Description
Transcript of TROSEAL FLEXI
*Product properties are typically averages, obtained under laboratory conditions. Reasonable variations can be expected on-site due to local factors, including environment, preparation, application, curing and test methods.
TROSEAL BUILDING MATERIALS PTE LTD
TROSEAL FLEXI2 Parts Cementitious Waterproofing System
Troseal Flexi is a 2-part acrylic cementitious waterproofing system. It reacts chemically after mixing to form a hard & elastic film which bonds tenaciously to most concrete/ substrate to protect against possible ingress of water.
Troseal Flexi can receive direct plastering or screed without affecting bond. Marbles and tiles can fix directly onto Troseal Flexi with most type of adhesive with most type of adhesives, fill voids, cracks, edges and angle. Troseal Flexi is suitable for repair material, so make sure that the surface is sound, even and clean.
Techinical DataAdvantages
Environment-friendly, non-toxic, harmelss & safeHigh bonding strengthBonds firmly with many types of mortar substrateCan be applied on wet & dry substrate directlyCan be applied on vertical, slope and top surface directly; no flow, easy to useGood weather resistance, it can be applied on the outdoor roof without special protective layer (normal protective layer is needed)
•••••
•
Area of Application
Suitable for dry and non long-term immersion environment, e.g. Roof
•
Put on a pair of safety goggles and gloves during use
Do not walk on the film until it becomes dry, then apply protection layer
Don’t construt under 5oC or in rain, snow or sand days
Store in room temperature around 0 - 30oC in cool & well-ventilated place
Keep containers sealed, closed when not in usedNote: Surface skin may occur even in unopened containers
Shelf life is around 1 year when unopen
StorageSafety Cautions
Keep dry and do not expose directly to sun & rain, and colliding during transportation
Use it up within two hours after mixing
TROSEAL FLEXI
Packaging
Powder: 12 kg , Liquid: 10 kgApproximate 0.9 to 1.0kg/m² per coat required
••
Description
*Product properties are typically averages, obtained under laboratory conditions. Reasonable variations can be expected on-site due to local factors, including environment, preparation, application, curing and test methods.
TROSEAL BUILDING MATERIALS PTE LTD
S/N Test Method Test Result Test Standard
1 Tensile Strength > 1.7 N/mm2 ASTM D412-92
2 Elongation over 25 mm > 170% ASTM D412-92
3 Adhesion to Concrete > 1.0 N/mm2 ASTM D4541
4 Hardness Shore A > 75 ASTM D2240
5Improve water resistance of concrete by
>7 times at 0.2 kg F/cm2 > PassedASTM D2240 NaOCI - 05%
6 Chemical Resistance - NHOH - 1.25%
7 Toxicity > Passed BS 6920
8Flexible over 25 mm diameter
Mandrel > Passed -
9 Bridging cracks up to 20 mm > Passed -
10 Water Vapour Transmission - > 25 g/m2
11 Chloride Content > 0.01%
12 Pot life at 30oC - Approx. 2 Hrs
13 Drying Time at 30oC Touch Dry - Approx. 1 - 3 Hrs
14 Foot Trafficable - 4 Hrs
15 Ponding Test - 24 Hrs after Application
TROSEAL FLEXI2 Parts Cementitious Waterproofing System
TROSEAL FLEXITROSEAL BUILDING MATERIALS PTE LTD
*Product properties are typically averages, obtained under laboratory conditions. Reasonable variations can be expected on-site due to local factors, including environment, preparation, application, curing and test methods.
Properties
