Nokia Siemens Networks Flexi Multiradio BTS – All-purpose Flexi ...
Flexi & FlexiLine
Transcript of Flexi & FlexiLine
Band Resaw Systems
Flexi & FlexiLine
Bandsaw Technology
TM
3.
Flexi & FlexiLine
2
Bandsaw Technology
www.ewd.de
TM
The band resaw system FlexiLine can be used for the resawing of soft- and hardwood four-sided cants into boards or thin boards.
FlexiLine is designed for industrial requirements with high production providing extra thin saw kerfs and very close sawing tolerances.
The number of bandsaws arranged in line is unlimited and depends only on the production volume required. The modular design of the feed sys-tem allows the combination of the in-dividual bandsaws for every required set-up.
FlexiLineThin kerf system for highest production
2250 mm 1400 mm
2150
mm
1080
mm
1300
mm
Basic data of the FlexiLine:
Wheel diameter: 1200 mmWheel face width: 120 - 140 mmSaw blade speed: up to 75 m/secSaw blade thickness: 0,8 - 1,2 mmSaw kerf: 1,3 - 2,2 mmFeed speed: up to100 m/minDepth of cut: up to 300 mmSetworks: spindle gear or servo-controlled
5.
Flexi & FlexiLine
4
Bandsaw Technology
www.ewd.de
TM
Flexi-Twin, Flexi-Quad, Flexi ... Further arrangements
The band saws of the Flexi program are used among other Applications in planer mills, parquet and flooring/panel plants in various machine configurations.
The band saws are supplied complete with all feed systems, drive motors, variable speed drives and line controls, ready for installation/start-up
In the sawmills, the Flexi band resaws are used for resawing or, in combination with a chipper canter as reducer bandsaws for small log processing.
Flexi-Triple-Twin
3500 mm 3550 mm
2150
mm
800
mm
1600
mm
Flexi - Einfach Flexi - Twin
Flexi - Twinfor slab-resawing
Flexi - Quad
Flexi - Reducer - Quad
7.
Flexi & FlexiLine
6
Bandsaw Technology
www.ewd.de
TM
Due to constant product improvements or developments the illustrations and specifications contained in this brochure are subject to change without notice.
Feed systems for the Flexi EBT-1-1200
Basic data of the Flexi EBT-1-1200
Wheel diameter: 1200 mmWheel face width: 120 -140 mmSaw blade speed: up to 40 m/secSaw blade thickness: 1,07 - 1,2 mmSaw blade width: 130 -155 mmSaw blade length: 7800 mmSaw blade strain: 0 - 200 N/mm2Feed speed: 10 - 75 m/minFeed drive system: electric drive motors, variable speedDepth of cut: up to 600 mmMain drive motor size: up to 45 KW
Flexi-EBT-1-1200The universal band resaw in single machine set-up
In sawmills or secondary processing the Flexi bandsaw is used in single set-up either as a main production machine or as a side line for sawing of specialty products.
In combination with the desired feed system, the Flexi can also be used without extensive conveyors before and after.
The type of feed system is defined with three letters, in any possible combination:
• Letter: G = vertical sawing only, S = tilting feed system for diagonal cut and vertical sawing
• Letter: A = only linebar sawing, B = only center (split) sawing, C = only for slab resawing D = A+B, E = A+C, F = A+B+C
• Letter: M = manual setting of the feed system (with spindle drive and nonius) O = setting of the feed system with electric motor in combination with options D or F remote control for change between linebar and center sawing
Special feed system, i.e. for warped boards are available as an option
Linebar sawing Center sawing Diagonal cut
1360 mm 2830 mm
2150
mm
1080
mm
1420
mm
Esterer WD GmbHEstererstraße 1284503 Altötting, Germanyphone: +49 (0)86 71 - 5 03 - 0fax: +49 (0)86 71 - 5 03 - 386 e-mail: [email protected]: www.ewd.de
Esterer WD GmbHTäleswiesenstraße 772770 Reutlingen, Germanyphone: +49 (0)71 21 - 56 65 - 0fax: +49 (0)71 21 - 56 65 - 400 e-mail: [email protected]: www.ewd.dewww.ewd.de
TM
© E
ster
er W
D G
mbH
– 2
013
Custom-made solutionsCustom-made solutionsCustom-made solutions
Custom-made solutions
Bandsaw Technology
CircularSaw & Profiling Technology
Edger Optimizer Technology