Doc. USTP0213 Rev4

TROI – SPC Database Walkthrough

Training Presentation

Doc. USTP0213 Rev1

SPC Walkthrough

SPC Client

Doc. USTP0213 Rev1

SPC Database

The TROI system utilizes a database system we know as SPC. It captures all

inspection data for every pad good or bad. Then stores it indefinitely to the desired

location.

We provide a tool called SPC client to open and view the raw data that is

collected. You will find a link for this in the SPI software labeled “SPC”.

With the SPC client tool you will be able to quickly create a variety of reports, charts, review NG pads in 3D and or view & pull

raw data to be handled accordingly.

Doc. USTP0213 Rev1

Logging In

Once logged into windows SPC database server will automatically start; then it’s

possible to log in with the SPC Client and review collected data.

Then, go to : File > Enter your login information

First, activate the link on your windows desktop or from within the SPI software.

Note: If logging in for the first time go to “Setting(s)” to setup a new user.

Select User then press Connect.

Select auto connect for ease of access.

Doc. USTP0213 Rev1

New user information

To configure new SPC UsersGo to “File” > “Settings”

Click “NEW”

Then Enter Appropriate Settings

IP, USER, PASS and Port number.

Note: This Information is set within the SPC

server.

Doc. USTP0213 Rev1

Searching

Search for a specific product by typing the name here

Filter data by time; select time then click “Time Sync” to activate.

Opening a product to view data-

Statistics Chart – Creates a statistics chartProcess Chart – Creates a process chartWork Data search – Pulls the main list of inspection data and subcategories (review section 9c for details on this)Report – Creates an automatic report for the selected product(s) Refresh – Refreshes product list

 

Doc. USTP0213 Rev1

Search and Export

You will notice similar export buttons on most windows

within the SPC client.

Use these to Export data in an easy to read format such as

an Image, CSV, Excel, PDF or Word file.

Use the text fields or check boxes to search for a specific inspection.

Export raw data directly to CSV file.

Edit viewed & exported data columns

Doc. USTP0213 Rev1

Work DATA Search

Common Functions

Array data - View Data by Block/Array

Component Data - View Data by Component (example. C43, U1)

Histogram - View data as Histogram Chart

PCB Viewer - Select one or multiple pads using a PCB graphic as a reference

Viewer - View defect data from NG results or PCB view used to run GRR and other test on specific pads or all pads.

Chart – View Data as a chart

Worst Pad Analysis – View worst pad NG data

Group – View Group Data (if created)

Delete- Deletes Data

“Right Click” after desired data is filtered and highlighted.

Note: Data will only be pulled for what is highlighted. Use Ctrl+A to select all data

Doc. USTP0213 Rev1

DATA LIST VIEW

Review and or Export Data

When using Data list view; Inspections by default will be listed to the left.

Cycle to the Array tab to open results for individual pads.

Select the appropriate check box(s), inspection, pad and or component.

Click “Refresh” to populate the data list. This applies to all other windows as well through SPC client.

Doc. USTP0213 Rev1

Worst PAD List

Worst PAD List will list all historical NG data by Array, PAD and or Component.

Right a select to bring a detailed list in the defect viewer by selected data only.

Data will be listed as a chart and a PCB legend will be presented so location can be quickly identified

Doc. USTP0213 Rev1

Defect Viewer

PCB LEGEND

View3D/2D Here

The Defect viewer will list data that the system called NG.

It will display a PCB image, 2D & 3D image of the pad selected.

Also listed is a chart that shows control limits and readings.

Doc. USTP0213 Rev1

Histogram

View average and trend data by a

histogram.

Utilize the image capture or

settings button to capture or make

changes.

Select the desired format then click refresh.

Doc. USTP0213 Rev1

Charts

Run Process and Statistic charts based on the data selected previously.

Utilize the settings tool if limits should be adjusted to match specs.

Doc. USTP0213 Rev1

PCB Viewer

This is the SPC client PCB Viewer.

From here you can use a PCB graphic to find and select pads of

your choosing to review & run dataUse Tools here to select data

Right Click Data for more options; run Histogram chart, Data viewer, or run a GR&R report on your selected pads and inspections.

Selected data values may be viewed here.

Doc. USTP0213 Rev1

Report Generator

Report Generator will easily create charts for you.

Select the report type, period, model(s) to be included.

After the report is generated it may be exported to word, excel or PDF formats.

Doc. USTP0213 Rev1

Settings and Customization

You may change how many results are displayed by going to

settings..

Go to File > then Settings

Browse through tabs to view and or change SPC client settings.