Trihedral VTSCADA setup with DL4500-EDH+ using Allen Bradley … · 2018-02-02 · Trihe 1st make s...
Transcript of Trihedral VTSCADA setup with DL4500-EDH+ using Allen Bradley … · 2018-02-02 · Trihe 1st make s...
Trihe
1st make sIf you havsetting hig
If you havthe DF1 se
edral VTS
sure you haveve a multi maghlighted be
ve a Standardetting highlig
CADA seDriver (T
e set up the Dster it shouldexactly same
Tunnel, it shhted be exac
tup with DTunnelled
DL4500 IP add look like sim.
ould look liketly same.
DL4500-Eunder Eth
dress and telnmilar to those
e similar to th
EDH+ usinhernet TC
net settings useen below,
hose seen bel
ng Allen BCP/IP ).
sing Lantroniplease make
ow, again ple
Bradley DF
ix Device Instsure the DF1
ease make su
F1
aller 1
re
Also makein our exa
Start Trihe
e sure that yoample we hav
edral VTSCAD
ou have addeve set COM28
DA software a
d and setup t8, it can be an
and add a new
the Comport ny port availab
w application
redirector poble in the PC.
and type the
ort similar to t.
e desired nam
that shown b
me.
below,
Click on Tag Browser
Click on N
Click on P
Type in th
New
orts
he ID Name an
nd the Descriiption then click on OK
Enter the
Right click
Click on D
port number
k on the creat
Drivers
r in this exam
ted port and
mple here it is
click on New
s 28, then ent
Child a show
ter the port se
wn below.
ettings as sho
own and clickk OK.
Click on A
Type in th
Under Typ
Allen Bradley D
he ID and the
pe tab, select
DF1 Compati
Description a
t the DH+ Dev
ble PLC/RTU
and click on O
vice, for SLC5/
OK
/04 selected
SLC‐500, & itt’s node addreess 23 in Octaal
Here seleand for DPlease no
Next is to
ct the port foF1 mode selete DL4500 IP
add your dat
or the driver, eect Full Duplexaddress last
ta tags, here f
enter the DL4x Octet was 50
for example w
4500 Node ad
0, so node 50
we added the
ddress, and m
decimal = 62
e 1st word of i
make sure to
2 Octal, as sta
integer file N7
check mark B
tion address.
7.
BCC
.