TRAINING DRILLING CENTER INFORMATION NOTICE In October ...

Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15

+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua

out of 8

TRAINING DRILLING CENTER

INFORMATION NOTICE

In October 2004 Ivano-Frankivsk National Technical University of Oil and Gas

(IFNTUOG) was accredited by International Well Control Forum (IWCF) and got the

ability to certify drilling personnel by Well Chief manager of IWCF.

Michael Cummins (right on

photo) presented accreditation

certificate to University’s vice-

rector –

Karpash Oleg Mikhailovich

(left on photo)

The necessity of international certification for drilling specialists was determined

by number of accidents. Opening of unknown formations at big depth increases the

risk of losing hydrostatic control in system “well-formation”, which is the first reason

of kick inflow.

Follow such situation – lack of drilling engineer’s qualification and disability to

take the immediate action in emergency situation can result at open gusher. Thus, it

hearts ecological situation and leaf to financial losses.

The solution of these problems was found at international certification of drilling

companies and personnel in different countries according to well control course.

So, these conditions accelerate international organizations to deal with the

questions of blowout security during well drilling in various countries of the world

with a help of personnel certification.

mailto:[email protected]



out of 8

To submit these criteria and bring new education services for Ukrainian drilling

personnel it was founded training drilling center in Ivano-Frankivsk National

Technical University of oil and gas.

Training group from public

company “Ukrtransgas”

and “Ukrgasproduction”

are self-studying after

course of lectures in

multimedia room of

training drilling centre

At this new University’s department the main position is at full-size training

drilling simulator DRILLSIM 5000, which was created for imitating different

technological operations while well drilling at different conditions and also for drilling

personnel’s knowledge control during gas kick in a well.

Training simulator DRILLSIM 5000 is equipped by all imitating consoles for

creation real drilling rig control room. There are acoustic effects, which are

synchronized with training operations, creates maximum presents of candidate at

drilling rig.

Soft of training simulator gives to the instructor ability to control all actions of

candidates during their practical study and examination. Instructor can change

parameters of practical exercises both at the beginning of training and during the

training. Immediate changes in drilling or well control conditions during well control

operations gives ability to instructor to create stress situation for candidate. It requires

immediate candidate’s reaction of changed situation and gives them opportunity to

evaluate their actions if it was done at real situation.




out of 8

Offshore and onshore

training console for

DRILLSIM 5000

operating

Central operation console

of DRILLSIM 5000

Our training centre has 2nd, 3rd and 4th LEVEL of accreditation. Education

process with candidates has provided by three-stage system: theoretical course,

practical course (training simulator) and examination. When a person successfully

passes its exam (more than 70% for each exam) it gives him opportunity to get IWCF

certificate. IWCF certification is required in most drilling companies all over the

world.




out of 8

Stuff of training drilling centre

Kolisnyk Vasyl Ivanovych –

IWCF assessment centre manager,

associate professor, Ph.D.,

tel/fax. 00380 (342) 504691,

E-mail: [email protected]

Oleksjuk Nikolaj Petrovich –

senior lector,

IWCF assessor

tel/fax. 00380 (3422) 4-21-53,


Kostryba Ivan Vasylovych –

associate professor, Ph.D.,

IWCF instructor

tel/fax. +380 (3422) 42353,


Kolisnyk Roma Antinivna –

Laboratory chief of training centre

tel/fax. +380 (342) 504691,


Hrymaniuk Volodymyr –

IWCF instructor

tel/fax. +380 (342) 504691,







out of 8




out of 8

Approximate time-table of IWCF courses

in 2016

Level of

certification

Start date Examination date

2

3 – 4 11.01.2016 22.01.2016

2 07.03.2016 11.03.2016

3 – 4 14.03.2016 25.032016

2 04.04.2016 08.04.2016

3 – 4 11.04.2016 22.04.2016

2 09.05.2016 13.05.2016

3 – 4 16.05.2016 27.05.2016

2 06.06.2016 10.06.2016

3 – 4 13.06.2016 24.06.2016

2 04.07.2016 08.07.2016

3 – 4 11.07.2016 22.07.2016

2 05.09.2016 09.09.2016

3 – 4 12.09.2016 23.09.2016

2 10.10.2016 14.10.2016

3 – 4 17.10.2016 28.10.2016

2 07.11.2016 11.11.2016

3 – 4 14.11.2016 25.11.2016

2 05.12.2016 09.12.2016

3 – 4 12.12.2016 23.12.2016


TRAINING DRILLING CENTER INFORMATION NOTICE In October ...

Documents

Transcript of TRAINING DRILLING CENTER INFORMATION NOTICE In October ...