Train Wheel Handlers Guide R0
-
Upload
joe-botelho -
Category
Documents
-
view
447 -
download
2
description
Transcript of Train Wheel Handlers Guide R0
SPECIAL APPLICATION PRODUCTS
Train Wheel Handlers
_______________________________________________________Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, OntarioTel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
Specially designed to handle train wheels and assemblies in the rail train industry. Theseattachments offer a safe, practical and economically method for handling train wheels.Various designs are available to handle a stack of wheels, train axle assembly or thecomplete train wheel drive. This type of attachment can be offered in a few different waysdescribed below. As with all special application designed units, detailed load information isrequired to determine the features for each attachment.
1. Train Wheel Handler 80C-TWH-A001
Slip On fork mount.
Designed to handle standard train wheel axles with wheels.
Single function with QD hydraulic couplers.
SPECIAL APPLICATION PRODUCTS
Train Wheel Handlers
_______________________________________________________Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, OntarioTel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
2. Train Wheel Drive Handler 145C-TWH-SP
Slip On fork mount with bolt on brackets to secure unit to fork shanks.
Forks are not included with attachment. Advise truck fork size when ordering.
Forks must be 72” usable length or longer. Fork spread MUST be 72” in to in or greater toaccept this attachment. An extra wide truck carriage maybe required on some trucks.
Designed to handle train wheel with powered drive assembly.
Single function with QD hydraulic couplers.
Typically for trucks 18,000 lbs to 25,000 lbs Capacity
Can be installed on existing carriage, sideshifter, or fork positioner.
SPECIAL APPLICATION PRODUCTS
Train Wheel Handlers
_______________________________________________________Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, OntarioTel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
3. Train Wheel Stack Clamp 60G-RCP-SP
ITA class III carriage mounting.
Based on standard Pivot Arm Roll Clamp with special contact pads.
360 degrees frame rotation. 180 degree stop group is available.
Two function attachment, clamp and rotate.
Special contact pads with spaced out rubber facing to handle stack of six wheels.
SPECIAL APPLICATION PRODUCTS
Train Wheel Handlers
_______________________________________________________Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, OntarioTel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
4. Special Fork Clamp 50D-CFB-SP
ITA Class II or III carriage mounting.
Based on standard 50D-CFB fork clamp with special fork profile and supports.
Forks and support designed to carry stack of four wheels.
Single function clamp. Sideshifting is optional.