Trailer Grader - SCANTRAXscantrax.be/wa_files/GT-300_20350_20AUS_20GB_20_2814_03_19_2… · Trailer...
Transcript of Trailer Grader - SCANTRAXscantrax.be/wa_files/GT-300_20350_20AUS_20GB_20_2814_03_19_2… · Trailer...
GT-300/350 AUS
Trailer Grader
Trailer Grader
GT-300AUS
New model Trailer Grader from Fransgard’s has the same great
advantages as the GT-DKH version. However the GT-AUS sets
new standards within professional blades and has a unique
construction of the horizontal angle, is set up to 20° at each side
between the blade and the frame with the 2 big wheels.
This blade always levels with the road and it makes an effective
”roof construction” resulting in the water running off the road.
The reverse side of the blade has a smart construction which
presses excess material down in the road when the driver
reverse without turning the blade. A great advantage when
arriving to an asphalt road.
As extra equipment it is possible to increase the blade
by 25 cm in each side, so the total width will be 350 cm
Model: GT-300AUS
Work width: 300 cm
Scraper height: 70 cm
Offset adjustment mechanical right/left: 60 cm
Hydraulic turnable blade: 60°
Horizontal setting hydraulic: 20°/20°
Hydraulic output: 4 double
Turnable reinforced steel Hardox 500: Standard
Wheels Standard
Snow wing right: Possible
Side plate: Possible
Weight: 1270 kg
Producer:Fransgård Maskinfabrik A/SFredbjergvej 1309640 Farsø, Denmarkwww.fransgard.dk
Importer:
This well thought
out product is
built in high
strength steel and
is the only
product in the
market which has
a unique turntable
with changeable
wear plates.