TOTAL  FOUNDATION  SOLUTIONS  FZCO  

Equipment  &  Exper.se  in  Founda.ons  &  Piling  Saving  GCC  contractors  /me  &  cost  in  Piling  –  Anchoring  –  Grou/ng  -­‐  Diaphragm  Walling  

Providing  equipment  from:  1.  ICE  USA    Vibratory  Hammers  &  Power  Packs  2.  Llamada  Spain    CFA  Piling  Machines  3.  IMT  Italy    Rotary  Bored  Piling  Machines  4.  TesCar  Italy    Mini-­‐Piling  Machines  &  Horizontal  Drilling  Rigs  5.  Comacchio  Italy  Anchoring,  Grou/ng,  SI  &  Waterwell  Drilling  Rigs  6.  Tecniwell  Italy  Pressure  Grou/ng  &  Jet  Grou/ng  Mixers  &  Pumps  7.  Toa-­‐Tone  Japan    Diaphragm  Wall  Trencher  Hydrocu\ers  8.  Hydropipe  Austria    Bentonite  Slurry  &  Gravel  Pumps  9.  Kennametal  USA  Tungsten  Carbide  Wear  Parts  &  Drilling  Tools  10.  TFS      Tungsten  Carbide  Drilling  Teeth  &  Chisels  

 TFS  

Boutique GCC provider of expertise & equipment for deep foundations & piling

¨  Established by partners of Tibo Company LLC ¤ Tibo trading in UAE continuously since 1969

¨  TFS established to focus on foundations & piling ¤ Offering Equipment Supply with Service & Expertise

across Middle East GCC n UAE, Saudi Arabia, Qatar, Oman, Kuwait & Bahrain n 3 Business Development Managers active across GCC

¤ JAFZA office / storage to maximise re-export flexibility

Vibratory Hammers & Power Packs

¨  Designed & manufactured: ¤ Vibratory Hammer from

North Carolina - USA ¤ Power Packs from near

Rotterdam - Netherlands

Exclusive  GCC  Distributor  

CFA Piling Rigs

¨  Designed & manufactured nr Barcelona, Spain since 1969

¨  > 200 machines operating

¨  Up to 1.5m dia & 41m depth

¨  Uses CFA to save cost & time ¤  1rig, drills, tremies concrete,

withdraws soil & places cage

¨  Uses low rpm / high ‘real’ torque to drill through rock

¨  7 models from 30 to 85 MT

¨  Offering PyO tech. support Exclusive  GCC  Distributor  

Rotary Bored Piling Machines

GCC  Distributor  

¨  Designed & manufactured near Ancona, Italy ¤ 100% CAT components

n AF-series use CAT excavator bases

n A-series on IMT bases n Torque 122 - 460 kNm n Up to 4m dia & 110m

depth

Mini-Piling Rigs

¨  Designed & manufactured near Ancona, Italy since 1976

¨  Rigs for low headroom & tightly constricted areas ¤  Drill piles in basements, under

bridges & pylons

¤  Drill 11m in only 2.5m headroom!

¨  Kelly bored piles & CFA

Exclusive  GCC  Distributor  

Anchoring, Grouting, SI & Water Well Drilling rigs

¨  Designed & manufactured near Treviso – Italy

¨  Saves you time & cost compared to others

5th Dealer Meeting

Riese Pio x October 8th – 9th 2013

Exclusive  GCC  Distributor  

76

GEO 205GEO 105

Potenza Motore Engine Power 31 kW (42 HP) Corsa Mast Mast Feed stroke 1.030 - 2.430 mm 3,4 - 8,0 ft Forza di Spinta Feed force 2.500 daN 5,620 lbs Forza di Tiro Retract force 2.500 daN 5,620 lbs Coppia Rotary Rotary Torque 220 - 380 daNm 1,622 - 2,802 lb*ft Giri Rotary Rotary Speed range 40 - 500 rpm Serraggio morse Clamp range 32 - 220 mm 1,2 - 8,6 in Peso Weight 2.400 - 2.700 kg 5,000 - 6,000 lbs

Potenza Motore Engine Power 24,5 kW (33 HP) Corsa Mast Mast Feed stroke 1.650 - 2.000 mm 5,4 - 6,6 ft Forza di Spinta Feed force 1.200 daN 2,698 lbs Forza di Tiro Retract force 1.200 daN 2,698 lbs Coppia Rotary Rotary Torque 220 - 380 daNm 1,622 - 2,802 lb*ft Giri Rotary Rotary Speed range 40 - 380 rpm Serraggio morse Clamp range 32 - 170 mm 1,2 - 6,7 in Peso Weight 1.500 - 1.800 kg 3,300 - 4,000 lbs

900

1700

2890 2760

CORS

A/FE

ED S

TROK

E 20

00

2860

750-1100

1230

4160

CORS

A/FE

ED S

TROK

E 24

30

3280

230 230

1340 4160

1850

Pressure Grouting & Jet Grouting Mixers & Pumps

¨  Designed & manufactured near Piacenza – Italy ¤ Grout Pumps ¤  Injection mixing ¤ Mixing units ¤ Cement silos ¤ Jetting drill strings ¤ Minijet

GCC  Distributor  

MPD-TMX Diaphragm Walling Trenchers

¨  Designed  &  manufactured  in  Tokyo  –  Japan  

¨  0.45  m3  compact  base  machine  not  100  ton  crane  ¨  Simple  structure  &  easy  maintenance  ¨  Mul/ple  horizontal  drum  cu\ers  

TOA-TONE BORING CO LTD

¨  60m  Max.  Depth  ¨  2.4m  Wall  Length  ¨  65-­‐100cm  thick  walls  ¨  Cuts  through  sand,  clay,  gravel  &  rock  

Slurry Pumps

¨  Designed in Austria & made in China by Muyuan

Exclusive  GCC  Distributor  

NEUENTWICKLUNG

NEW DEVELOPMENT

Serie MPAElektro Tauchpumpefür schwereBedingungenfür abrasive undkorrosive Flüssigkeiten

Elektromotorenaus deutscher Produktion –zusammengebaut undgetestet in Deutschland

• Einsatz alsEntwässerungs-pumpe

• Geringer Platzbedarf

• Verschleißteileidentisch mithorizontaler MPA Pumpe

Type

A-SUB

SCHLAMM-PUMPEN

Telefon +43 (0) 62 46 / 744 31-0 • Fax +43 (0) 62 46 / 744 31-17 • office@hydropipe.at • www.hydropipe.at

Vertriebsgesellschaft m.b.H.

Büro & Verwaltung:5082 Grödig • Oberfeldstraße 4Zentrallager:5412 Puch • Riesbachstraße 769 & 770

muyuan

Prospekte undVerschleißteilpreisefinden Sie aufwww.hydropipe.at

Die Bohrspülungspumpemit Hydraulikantrieb ! Gepanzerte Ausführung! Hochverschleißfest

! Fettgeschmiert! Kein Sperrwasser

Selbstansaugenddurch Ansaugbehälter

Inserat_MP-Schlammpumpen_210x102mm+3mm_Layout 1 11.09.13 08:24 Seite 1

Cemented Carbide Drilling Tools

¨  US Corporation manufacturing in Germany ¤ Producing the best cutting tools since 1938 ¤ Most competitive of big brand manufacturers ¤ Producing full range of Foundation Drilling Tools

GCC  Distributor  for  Founda/on  Drilling  Tools  

Quick change – wall cutters – welding bars – flat tools – modular drills

Tungsten Carbide tipped Drilling Teeth & Round Shank Chisels

¨  Stocked from 2 Asian manufacturers (9 tested) ¤  FZ 80 Teeth & holders

¤  1” (25.4mm) Round Shank Chisels & holders ¤  30/38mm Rounds Shank Chisels & holders

¨  Tests well against 2 European benchmarks Tungsten  carbide  wear  parts’  performance  evalua7on  criteria:  

Metallurgical  tests  undertaken  in  USA,  UK  &  Switzerland:  

1. Abrasion  Wear  resistance   ASTM  G133  Tribology    ASTM  E18  Rockwell  HRC  Hardness    

2. Transverse  Rupture  Strength   ASTM  B406  Transverse  Rupture  Strength    

3. Resistance  to  Chipping   ASTM  B276  Material  Porosity  test  ASTM  E3/E407  Material  Uniformity  

4. Cubng  Ability     ASTM  G133  Tribology  Test  

Foundation Equipment & Expertise

¨  TFS provides equipment & expertise for deep foundations, focusing on Piling, Anchoring, Grouting & Diaphragm Walling, but also offers: ¤ Kelly Bars, Augers & Drilling Tools ¤ Data Loggers ¤ Tools for Anchor Drilling & Soil Investigation ¤ Anchoring Rods ¤ DTH Hammers & Compressors ¤ Bentonite Mixing/Storage/De-sanding plants

Equipment  &  Exper.se  in  Founda.ons  &  Piling  

TFS  TOTAL  FOUNDATION  SOLUTIONS  FZCO  

LB11  007,  PO  Box  18458  Jebel  Ali  Free  Zone,  Dubai,  UAE  

T:  +971  4  880  8460  F:  +971  4  880  8461  Skype:  totalfounda/onsolu/ons  

Email:  sales@totalfounda/ons.com  www.totalfounda/ons.com  

 

TFS