TopTier TM LED Parking Garage and Canopy · PDF fileUnparalleled Performance and Comfort...
Transcript of TopTier TM LED Parking Garage and Canopy · PDF fileUnparalleled Performance and Comfort...
TopTierTM
LED Parking Garage and Canopy Luminaire
2
Patented AccuAimTM optics
Precisely controlled light output
The Breakthrough You’ve Been Waiting ForWaveStreamTM LED technology presents a new paradigm that will take
LEDs mainstream in a way that hasn’t been possible before — transforming
the LED point source into a highly efficient and elegant luminous plane.
It’s a groundbreaking technology that delivers unparalleled design
freedom, maximum energy efficiency and unrivaled optical and
brightness control.
The Science Behind the BeautyA patented optical coupling process maximizes the amount of light
injected into the WaveStream panel, dramatically improving luminaire
efficiency. Laser-precise, patented AccuAimTM optics arranged in exacting
patterns provide unparalleled brightness control while delivering optimal
distributions tailored to each fixture and application.
Design Freedom
Optical Control
Energy Efficiency
Brightness Control
Mainstream Value
3
Highly efficient luminous panel
Optimal LED coupling
WaveStream is the first lighting technology designed and optimized exclusively for LEDs — with form and function that allows
mainstream adoption like never before. Once you factor in all the ways you can build and customize WaveStream lighting
solutions, over 500,000 configurations are available to address nearly every major lighting application.
Unparalleled Performance and ComfortTopTier™ LED Parking Garage and Canopy Luminaire
is an innovative solution that delivers an unparalleled
combination of performance and visual comfort.
Patented WaveStream™ optical technology disrupts the
line of sight of the LED light sources from the observer,
while extracting the maximum amount of light on task.
This approach results in a high level of uniformity and
vertical footcandles which enhances the level of safety
in the application.
Long Life and Low Maintenance CostIn addition to delivering superior performance, the TopTier
LED Parking Garage and Canopy Luminaire is designed
for low maintenance, long life and low cost of ownership.
These are key benefits which provide compelling justification
to retrofit traditional HID solutions, or allow end users
to capitalize on these advantages in new construction
applications. The TopTier luminaire can be tailored to meet
your most important needs without compromising on
specification features. The fixture housing is IP66 rated,
which provides years of reliable operation with minimal
service requirements.
A New Benchmark in Visual Comfort
Universal functionality, energy-efficient optical control, easy installation and a low-profile design prove that the TopTier
LED Parking Garage and Canopy Luminaire is the best choice for parking garage, stairwell, low-bay and canopy
illumination.
6
Construction• Low profi le, die-cast aluminum housing
• Spun aluminum top sloped to minimize bird nesting
• Universal, galvanized steel quick-mount plate with
click-and-lock tab releases
• Mounts to standard one-gang, two-gang and 4" round wet
location junction boxes
• IP66 rated
• 3G vibration rated
• UL and cUL wet location listed
Electrical• Operates in -40°C to 40°C ambient conditions. Optional high
ambient 50°C confi guration
• 120-277V 50/60Hz, 347V 60Hz, or 480V 60Hz operation
• Standard proprietary circuit module designed to withstand
10kV of transient line surge
• Optional occupancy sensor provides additional energy savings
• Scalable in six lumen packages ranging from 3,000 to
11,000 nominal delivered lumens
Optical• Available in concentrated (CQ), medium (MQ) and wide (WQ)
distributions
• Standard in 4000K CCT, optional 3000K and 6000K CCT
• Minimum 70 CRI
• Optional clear or Solite® glass lens
Finish• Five-stage super durable TGIC paint resists extreme weather
conditions while providing optimal color and gloss retention.
Available in white or optional grey, bronze, black, dark platinum
and graphite metallic fi nishes.
Warranty• Five-year warranty
Design Performance Features
Surge ProtectionStandard UL 1449 Listed 10kV/10kA surge
protective device protects against common
(line-to-ground) and differential (line-to-line)
mode surges.
Dimming Occupancy Sensor Optional integral occupancy sensing
reduces power consumption and
enhances payback. Factory programmed
to 50% in low mode and fi eld adjustable
with the FSIR-100 remote programmer.
Quick-Mount SystemRugged, quick-mount system with secure
click-and-lock tab releases ensures safe
and easy installation.
Grey
Dark Platinum
Bronze
Graphite Metallic
Black
White (Standard)
NOTE: Compliant with IESNA TM-21.NOTE: Compliant with IESNA TM-21.
90%
60,000
Lumen Maintenance
Hours of Operation
EATON’S COOPER LIGHTING BUSINESS TopTier LED Parking Garage and Canopy Luminaire
7
Mounting Options
Surface and J-box Mount (Standard)Quick-mount plate adapts to all wet
location junction boxes allowing for
surface, free-swing or rigid pendant
installation (J-box supplied by others).
Trunnion MountTrunnion mount bracket allows direct
attachment to ceiling using anchors, and
provides a 1/2" threaded connection box
for wiring connections outside the fi xture.
Wall MountWall mount arm allows you to match path
or perimeter lighting within or outside the
parking garage.
Three-Step Installation
Step 1Install quick-mount plate to wet location
junction box.
Step 2Secure fi xture on wire hanger and make
electrical connections.
Step 3Lift and slide fi xture until it clicks. Lock
release tabs with captive hardware.
Quick-Mount System . . . . . . . . . . . .
Patented WaveStreamTM . . . . . . . . . . . . . LED Technology
. . . . . . . IP66 Rated
. .
. .
. .
. .
. . . . .
Patents Pending
EATON’S COOPER LIGHTING BUSINESS TopTier LED Parking Garage and Canopy Luminaire
8
Parking Garage Applications
Design PracticesLighting design for parking structures normally follows specifi c published guidelines and design practices as defi ned by the Illuminating
Engineering Society of North America (IESNA). IESNA publishes recommended guidelines to help facilitate garage lighting design.
The following minimum guidelines are established for safety and security of pedestrians and property within the space.
Sides of Drive Fixture LocationFixture spacing = 30' x 30' on center
spacing (two per bay). Fixtures mounted 9'
to bottom of fi xture, even with the bottom
of t-joists.
Center of Drive Fixture LocationFixture spacing = 30' centered down drive
lane; 60' on center between driving lanes
(one per bay). Fixtures mounted 9' to bottom
of fi xture, even with the bottom of t-joists.
30'
30'
30'
60'
15'
15'
30'
30'
30'
30'
IESNA RP-20-98 Recommended Maintained Illuminance Values for Parking Garage Facilities
Area of Illumination
Minimum Footcandle
Level (On Floor)
Maximum / Minimum Footcandle Level
(On Floor)
Vertical ReadingArea Of Illumination
(On Floor)
Minimum Footcandle Level
(60" Above Floor) 1
Basic 1.0 10:1 Basic 0.5
Ramps (Day) 2.0 10:1 Ramps (Day) 1.0
Ramps (Night) 1.0 10:1 Ramps (Night) 0.5
Entrance Areas (Day) 50 10:1 Entrance Areas (Day) 25
Entrance Areas (Night) 1.0 10:1 Entrance Areas (Night) 0.5
Stairways 2.0 N/A Stairways 1.0
NOTE: 1 Vertical reading is taken at lowest point of horizontal illumination level.
Elevation View
9'
30'
10'
Optical DistributionsThe TopTier Luminaire is designed with three different
optical distributions, each optimized for different
applications. The concentrated (CQ) distribution is
designed for the entrance of a parking garage or building
canopies, where IES recommended light levels are higher
and where fi xture spacings are approximately one to two
times the mounting height. The medium (MQ) distribution
is ideal for mounting heights above 12', or for applications
that have higher than typical light levels. The wide (WQ)
distribution is for typical parking garages and is designed
for optimal fi xture spacing and reduced fi xture counts.
Concentrated (CQ) Medium (MQ) Wide (WQ)
EATON’S COOPER LIGHTING BUSINESS TopTier LED Parking Garage and Canopy Luminaire
9
0
0
20
30
40
1624 8 18 0
Coverage Side Area (Feet)
For mounting heights from 8' to 16'
For mounting heights up to 20'
For mounting heights from 16' to 40'
Coverage Side Area (Feet)0 10 20 30 4010203040
8 18 24
0
10
20
30
40
10
20
30
40
Coverage Top Area (Feet)
0
5
10
15
20
5
10
15
20
Coverage Top Area (Feet)
20
15
10
5
0
20 18 15 12 9 6 63 9 12 15 183 0 20Coverage Side Area (Feet)
0
20
10
10
20
Coverage Top Area (Feet)
2"[59mm]
0.78"[20mm]
3-1/2" [89mm]
2-3/16"[56mm]
3/4"[19mm]
Occupancy Sensing
Accelerate Payback on your InvestmentTo further enhance energy savings, the TopTier Luminaire offers an optional occupancy sensor that is integral to each individual
luminaire. When the area surrounding the luminaire is unoccupied, the sensor has the ability to reduce light levels and power
consumption. In addition to fi nancial benefi ts, the control options for the TopTier are designed to be simple and
cost-effective ASHRAE and Title 24 compliant solutions.
Dimming Occupancy Sensor (DOS)When the DOS option is selected, the occupancy sensor is connected to a dimming driver and the entire luminaire dims when there
is no activity detected. When activity is detected, the luminaire returns to full light output. The sensor is factory preset to dim down
to approximately 50% lumen output with a time delay of fi ve minutes. To change these settings, the FSIR-100 accessory can be
purchased. The FSIR-100 is a wireless confi guration tool that allows the dimming level, time delay, sensitivity and other parameters
to be changed. Consult a representative from Eaton’s Cooper Lighting business for additional details.
LumaWatt Wireless Control and Monitoring System (DIMRF-LW and DIMRF-LN)The LumaWatt system is best described as a peer to peer wireless network of luminaire-integral sensors that operate in accordance
with programmable profi les. The end user can create and manage sensor profi les with browser based management software and
broadcast to sensors as necessary via wireless gateways. Each sensor is capable of motion and photo sensing, metering power
consumption and wireless communication. For additional details, refer to www.cooperlighting.com.
Dimming Occupancy Sensor (DOS)
LumaWatt (DIMRF-LW and DIMRF-LN)
EATON’S COOPER LIGHTING BUSINESS TopTier LED Parking Garage and Canopy Luminaire
10
Energy Savings
Energy Savings/Equivalency/Cross Reference Guide
Product HID EquivalencyFluorescent Equivalency
Lamp System WattageRated Avg. Life
(Hours)TopTier Wattage
TopTier Life (Hours) 1
EnergySavings %
LED TopTier 175W4 x 32W
2 x 54W
175W Metal Halide (HID) 208W 7,500
50W 60,000
76%
4 x 32W T8 (Fluorescent) 114W 24,000 56%
2 x 54W T5 (Fluorescent) 121W 36,000 59%
NOTE: Nominal lumens prior to optical and confi guration losses based on 4000 CCT. 4000K package at 25°C ambient. TopTier = 5,280 lumens. 1. Hours of life based on 85% lumen maintenance.
Annualized Energy and Maintenance Savings/Cost Comparison
Product Hours/Year Life
(Hours) 1 WattageEnergy
Cost/Year at .10 kWh 2
Relamp/Fixture 3
Total Energy Cost/Fixture and
Maintenance
SavingsPer Fixture
%Savings
LED TopTier 24 / 8,760
60,000 50W $43.80 $0.00 $43.80 $203.84 82%
Metal Halide 175W 7,500 208W $182.21 $65.43 $247.64
LED TopTier 24 / 8,760
60,000 50W $43.80 $0.00 $43.80 $83.56 66%
4 x 32W (Fluorescent) 24,000 114W $99.86 $27.50 $127.36
LED TopTier 24 / 8,760
60,000 50W $43.80 $0.00 $43.80 $84.75 66%
2 x 54W (Fluorescent) 36,000 121W $106.00 $22.55 $128.55
NOTE: 1. Lamp life for non-LED sources is defi ned as 50% failures. 2. Cost = (Watts x 24 hours per day x 365 days per year) / 1000 = Daily Kilowatt hour (kWh). kWh x 0.10 cents/kWh = Cost/Year at .10 kWh. 3. Relamping cost is calculate
based on an average relamping period associated with each fi xture; MH: .85 yr, T8: 2.74 years, T5: four years.
Reduced Energy ConsumptionOperating and maintenance costs of a lighting system are dramatically impacted by the specifi ed lamp source, system power
consumption and the duration time of operation. Total system input watts and fi xture operating life should be the driving considerations
when addressing energy consumption and total cost of ownership. Energy savings increase when energy consumption is reduced and
maintenance intervals are extended.
= Prescriptive Incentive of $150 or Less
= Prescriptive Incentive Greater than $150
= Custom Incentive
Utility Incentive Programs*Utility companies are leading the way in responding to climate change and the power sector’s role in reducing greenhouse gases while
meeting the country’s growing energy needs. Monetary incentives toward the purchase of high-effi cient parking garage luminaires
support clean energy resources and technologies, which are critical to our transition to a sustainable, low carbon society.
* As of November 1, 2013.
EATON’S COOPER LIGHTING BUSINESS TopTier LED Parking Garage and Canopy Luminaire
11
Ordering Information
Additional Information
Compliances Technical Data (Electronic LED Driver) Shipping Data (Approximate Net Weight)
UL and cUL Wet Location Listed
3G Vibration Rated
LM79/LM80 Compliant
IP66 Rated
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V, 50/60Hz, 347V/60Hz, 480V/60Hz
-40°C Minimum Ambient Temperature Rating
40°C Maximum Ambient Temperature Rating
50°C Maximum Ambient Temperature Rating (HA Option)
16 lbs. (7.2 kgs.)
NOTE: Specifi cations and dimensions subject to change without notice.
Dimensions
4-7/16"[106mm]
4-7/16"[106mm]
5-1/2"[140mm]
18-3/8" [466mm] 18-3/8" [466mm]
TRUNNION MOUNTSURFACE OR PENDANT MOUNT WALL MOUNT
18-3/8" [466mm]
22-9/16" [574mm]
7-7/16"[188mm]
5-13/16"[149mm]
7-3/16"[183mm]
4"[101mm]
4-7/8"[123mm]
9-1/4"[236mm]
Adjustable to14"
[356mm]
Sample Number: TT-B2-LED-E1-WQ-AP
Product Family Lumen Package Lamp Type Voltage Distribution Mounting Color
TT=TopTier B1= Nominal 3,000 LumensB2= Nominal 4,000 LumensB3= Nominal 5,000 LumensB4= Nominal 7,000 Lumens 1
B5= Nominal 9,000 Lumens 1, 2, 3
B6= Nominal 11,000 Lumens 1, 2, 3
LED= Solid State Light Emitting Diodes
E1= Electrical (120-277V) 4
347=347V480=480V 5
CQ= ConcentratedMQ=Medium WQ= Wide
[BLANK]= Surface or Pendant MountTMB= Trunnion Mount with
Connection BoxWM=Wall Mount
[BLANK]=WhiteAP=GreyBZ=BronzeBK=BlackDP=Dark PlatinumGM=Graphite Metallic
Options (Add as Suffi x) Accessories (Order Separately)
7060=70 CRI / 6000K 6
8030=80 CRI / 3000K 6
30L=Extra Long 30" Wires 7
HA=50°C High Ambient 1, 8
CG=Clear Glass 9
SG=Solite® Glass 10
TR=Tamper Resistant Hardware X=Driver Surge Protection Only 5LTD=Fifth Light DALI Driver(s) 4, 6, 7, 11, 12
IBP=Integral Battery Pack (Specify 120V or 277V. Must Specify Voltage) 2, 8 ICP=Integral Cold Weather Battery Pack (Specify 120V or 277V. Must Specify Voltage) 3, 8
MSP/DIM-L12=Mini Dimming Occupancy Sensor (8' - 12' Mounting) 13
MSP/DIM-L30=Mini Dimming Occupancy Sensor (12' - 30' Mounting) 13
DOS=Dimming Occupancy Sensor (8' - 20' Mounting) 14
DIMRF-LW=LumaWatt Wireless Sensor, Wide Lens (8' - 16' Mounting) 15
DIMRF-LN=LumaWatt Wireless Sensor, Narrow Lens (16' - 40' Mounting) 15
FSIR-100=Wireless Confi guration Tool for Occupancy Sensor 14
MA1252=10kV Circuit Module Replacement
NOTES: 1 The B5 and B6 lumen packages are not available with the HA high ambient option. 2 The IBP option is only available in 120V or 277V, must specify voltage. 0°C minimum, 25°C maximum ambient temperature. Not available with B6 lumen package. 3 The ICP oaption is only available in 120V or 277V, must specify voltage. -20°C minimum, 25°C maximum ambient temperature. Not available with B6 lumen package. 4Replace E1 with specifi c voltage when selecting the 5LTD option (120, 208, 240 or 277V). 5 Not to be used with un-grounded systems. 6 Extended lead times apply. 7 Not available with WM or TMB mounting options. 8 The 5LTD, IBP and ICP options are not available with dimming (DIM, DOS, DIMRF-LN or DIMRF-LW) or the HA high ambient option. 9 CG clear glass option only available with MQ and WQ distributions. 10 SG (Solite® glass) – Included as standard with the CQ distribution. Only available with WQ distribution. 11 Not available in combination with the IBP and ICP options. 12 Multiply published IES fi les by .95 when 5LTD is used with the B5 or B6 lumen package. 13 Available to order in April 2015. 14 The FSIR-100 confi guration tool is required to adjust parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your Eaton’s Cooper Lighting business representative for more information. 15 DIMRF-LN and DIMRF-LW are not available in 347 or 480V.
EATON’S COOPER LIGHTING BUSINESS TopTier LED Parking Garage and Canopy Luminaire
Eaton's Cooper Lighting Business
Headquarters
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
Our Lighting Product Brands
Halo
Halo Commercial
Portfolio
IRiS
RSA
Metalux
Corelite
Neo-Ray
Fail-Safe
MWS
Ametrix
Shaper
io
Lumark
McGraw-Edison
Invue
Lumière
Streetworks
AtLite
Sure-Lites
Our Controls Product Brands
Greengate
iLumin
Zero 88
Fifth Light Technology
iLight (International Only)
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com
© 2015 EatonAll Rights ReservedPrinted in USAPublication No. ADH131121February 2015
Eaton’s Cooper Lighting Business 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com