Tnc connector series

COPYRIGHT © CMPTER ELECTRONICS 2010

Cable Connectors

Receptacles With Solder End

TNC CONNECTORS

... A Vital Part of Connection World

CMPTER

TNC 50 Ohm Coaxial Connectors

#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8502 5485 Website: www.cmpter.com Email : [email protected]

CMPTER

1

DESCRIPTION

CONTENTS

Description ..............................................................................

Technical data ...........................................................................Interface dimensions ....................................................................

Cable connectors .......................................................................Receptacles with solder end ............................................................Assembly instruction ....................................................................Mounting hole ........................................................................... 15

1

2

34

109

The Threaded Neil Concelman connector emerged in 1956 as an alternative to the bayonet coupling mechanism of the BNC.Utilizing the same basic structural parameters as the BNC connector, only minia-ture. They are two versions of TNC connectors:Standard and Reverse Polarity. The standard type of TNC operates in frequency ranges between DC-11 GHz, and is often used in applications which have perfor-mance requirements such as networks, antennas, telecom, cable assembly and celluar system.

TNC INTERFACE


CMPTER

2

Interface dimensions conformable to the standards:

International: IEC60169-17Europe: CECC 22 200USA: MIL-C-39012, TNC Interface MIL-STD-348A/313

IP rating (interface, mated) IP68

LETTERmm inch

LETTERmm inch

min. max. min. max. min. max. min. max.A 1.32 1.37 0.052 0.054 A - 4.72 - 0.186

B 4.83 - 0.190 - B 8.1 8.1 0.319 0.321

D 11.40 - 0.449 - C 8.31 8.46 0.327 0.333

E - 2.2 - 0.087 D 8.79 9.04 0.346 0.356

F 0.35 0.65 0.014 0.025 E 9.6 9.68 0.378 0.381

G 7 7.05 0.275 0.277 F - 2.2 - 0.087

1 4.9 5.7 0.193 0.224 H - 5.9 - 0.232

2 5.28 5.79 0.208 0.228 1 8.3 8.5 0.327 0.335

3 0.15 - 0.006 - 2 1.73 2.24 0.068 0.088

4 1.8 - 0.071 - 3 4.75 - 0.187 -

5 0.15 - 0.006 - 4 - 0.15 - 0.006

6 0.08 1.02 0.003 0.040 5 4.72 5.23 0.186 0.206

7 5.33 5.84 0.210 0.230 6 4.78 5.28 0.188 0.208

8 0.7 1.98 0.027 0.078 7 10.7 - 0.421 -

8 0.38 0.76 0.015 0.030

9 4.95 - 0.195 -

PLUG JACK

TECHNICAL DATA


CMPTER

3

ELECTRICAL DATA

Impedance

Frequency range

Dielectric withsanding voltage

Working voltage

50 Ohm

DC — 11 GHz

1.5 kV rms, 50 Hz(depending on cable)

500 V rms, 50 Hz(depending on cable)

Insulation resistance

Contact resistance

RF leakage

≥ 5*1000 MΩ

inter contact ≤ 1.5 mΩ

out contact ≤ 1mΩ

≥ 55 dB

MECHANICAL DATA

Coupling nut retention force

Contact captivation

Durability(matings)

46 Ncm...69 Ncm/4.1 in.lbs...6.1 in.lbs (recommended)

≥ 450 N / 101.2 lbs

≥ 27N / 6.1lbs

≥ 500

Coupling nut torque

ENVIRONMENTAL

Thermal shock

Moisture resistance

Corrosion

-40 °C to + 155 °C

MIL-STD-202, Method 107,Condition B

MIL-STD-202, Method 106

Saltspray test acc.to MIL-STD-202, Method 101, Condition B

Temperature Range

MIL-STD-202, Method 204, Condition BVibration

170 Ncm/15.0 in.lbs (proof torque)

CABLE CONNECTORS

Straight cable plugs (male)


CMPTER

80-03-1M18-001

P/N Cable TypeFinish

BodyCenter

Gold Nickel

Assembly Instruction Notes

LMR195/RG58 A01

RoHS

80-03-1M04-002


BodyCenter

Gold Nickel


RG316/LMR100/RG174 A02

80-03-1M10-004


BodyCenter

Silver Nickel


LMR240 A01

Cable entry crimpCentre contact soldered



4

3.20

[.12

6 D

IA]

4.60

[.18

1 D

IA]

6.25

[.24

6 D

IA]

12.70 [.500]

5.40

[.21

3 D

IA.]

23.50 [.925]

15.0

0 [.5

91 D

IA.]

1.65

[.06

5 D

IA.]

3.20

[.12

6 D

IA.]

4.00

[.15

7]

10.00 [.394]

20.80 [.819]

15.0

0 [.5

91 D

IA.] 2.60

[.10

2 D

IA.]

4.2

[.165

DIA

.]

6.80

[.26

8 D

IA.]

8.00

[.31

5 D

IA.]

13.00 [.512]

23.50 [.925]

15.0

0 [.5

91 D

IA.]

CABLE CONNECTORS

Straight cable plugs (male)


CMPTER

80-03-1M01-005


BodyCenter

Gold Nickel


LMR400 A01

RoHS

80-03-4M18-006


BodyCenter

Gold Nickel


RG58/LMR195 A03

80-03-4M01-008


BodyCenter

Gold Nickel


LMR400 A03

Cable entry crimp

Cable entry clampCentre contact soldered


5

Centre contact soldered

26.45 [1.041]

15.0

0 [.5

91 D

IA.]

SW 11.00[.433 AF.]

SW 11.00[.433 HEX.]

37.45 [1.474]

19.0

0 [.7

48 D

IA.]

SW 16.00[.630 AF.]

SW 16.00[.630 AF.]

15.0

0 [.5

91 D

IA.]

15.00 [.591] 10.9

0 [.4

29 D

IA.]

12.2

0 [.4

80 D

IA.]

7.5

[.295

DIA

.]

26.00 [1.024]

15.0

0 [.5

91 D

IA.]

CABLE CONNECTORS

Right angle cable plugs (male)


CMPTER

80-13-1M18-009


BodyCenter

Gold Nickel


LMR195/RG58 A04

RoHS

80-13-1M04-010


BodyCenter

Gold Nickel


LMR100/RG174/RG316 A04



6

25.10 [.988]

19.7

0 [.7

76]

3.20 [.126 DIA]

12.70 [.500]

5.40

[.21

3 D

IA.]

6.25

[.24

6 D

IA.]15

.00

[.591

DIA

.]

25.10 [.988]

3.20

[.12

6 D

IA.]

4.00

[.15

7 D

IA.]

22.0

0 [.8

66]

1.65 [.065 DIA.]

10.00 [.394]

15.0

0 [.5

91 D

IA.]

CABLE CONNECTORS

Straight cable jacks (female)


CMPTER

80-02-1M18-012


BodyCenter

Gold Nickel


RG58/LMR195 A01

RoHS

80-02-1M21-013


BodyCenter

Gold Nickel


LMR195/RG58 A03

Cable entry crimp


7

7/16

-28U

NE

F-2A

30.00 [1.181]

11.5

[.45

3 D

IA.] 6.

80 [.

268

DIA

.]8.

00 [.

315

DIA

.]

13.00 [.512]

4.2

[.165

DIA

.]

33.35 [1.313]

SW 10.0[.394 HEX.]

7/16

-28U

NE

F-2A

11.5

[.45

3 D

IA.]

SW 10.0[.394 AF.]

CABLE CONNECTORS

Straight bulkhead cable jacks (female)


CMPTER

80-02-1A04-015


BodyCenter

Gold Nickel

Assembly Instruction Mount Hole

LMR100/RG174/RG316 A01

RoHS

80-02-2A14-016


BodyCenter

Gold Nickel

Assembly Instruction Mount Hole

Semi-rigid.141/RG402 A04

Cable entry solderCentre contact crimp

Cable entry solder

8

M01

M017/

16-2

8UN

EF-

2A

1/2-

28U

NE

F-2A

29.30 [1.154]

10.00 [.394]

MAX. 5 [MAX. .197]

1.65

[.06

5 D

IA.]

3.20

[.12

6 D

IA.]

4.00

[.15

7]

10.00 [.394]2.60

[.10

2 D

IA.]

SW 16.00[.630 HEX.]

SW 17.00[.669 HEX.]

Centre contact solder

7/16

-28U

NE

F-2A

1/2-

28U

NE

F-2A

27.00 [1.063]

10.00 [.394]

MAX. 5 [MAX. .197]

SW 16.00[.630 HEX.]

SW 17.00[.669 HEX.]

3.70

[.14

6 D

IA.]

RECEPTACLES WITH SOLDER END

Receptacles, jacks (female)


CMPTER

80-02-5B2-018

P/N Mount HoleFinish

BodyCenter

Gold Nickel

Notes

M02

RoHS

80-02-5F1-019


BodyCenter

Gold Nickel

Notes

M03

80-02-5F7-020


BodyCenter

Gold Nickel

Notes

M03

Panel mounted

Panel mounted

Panel mounted

9

7/16

-28U

NE

F-2A

26.00 [1.024]

11.5

[.45

3 D

IA.]

14.0

0 [.5

51 D

IA.]

12.00 [.472] 2.00 [.079]

2.03

[.08

0 D

IA.]

3/8-

32 U

NE

F-2A

26.50 [1.043]

17.50 [.689 SQ.]12.70 [.500]

12.7

0 [.5

00]

4- 3.10 [.122 DIA.]

2.30 [.091]

18.20 [.717]

1.40

[.05

5 D

IA.]

2.03

[.08

0 D

IA.]

11.0

0 [.4

33]

25.30 [.996]

17.50 [.689 SQ.]12.70 [.500]

12.7

0 [.5

00]

4- 3.10 [.122 DIA.]

2.30 [.091]

18.20 [.717]

2.03

[.08

0 D

IA.]

11.0

0 [.4

33]

5.30

[.20

9 D

IA.]

ASSEMBLY INSTRUCTIONS

A01


CMPTER

10

BodyCenter Contact

Heatshrink sleeve(option)

a

Stripping Dimensions

bc

Ferrule

2. Slide the center contact on until it bottom against the cable dielectric.

Solder the center contact onto the cable.

1

2

3. Fan the braid.

4. Slide the cable into the body until stops.

3

1 2

1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.Strip the cable as Striping Dimensions.

1

5. Slide the ferrule over the braid.Crimp the ferrule with crimping tool (see table).

1

1

2

2 1

6. Cut the excess of braid if necessary.Slide the sleeve over the ferrule and heatshrinkit in place (option).

P/NHEX. Crimp Tool (mm [in])

Stripping Length (mm [in])

ba cCable Type

LMR240

80-03-1M01-005 LMR400

80-03-1M18-001LMR195/RG58 5.41 [.213]

6.80 [.268]

10.9 [.429]

4 [.157]11.5 [.453]2 [.079]

2.5 [.098]12.5 [.492]

4.5 [.177] 14 [.551]

80-03-1M10-004

80-02-1M18-012


A02


CMPTER

Body


1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.

2. Slide the guide pin on until it bottom against the cable dielectric.

Solder the guide pin onto the cable.

1

2

3. Fan the braid.

4. Slide the cable into the body until stops.

5. Slide the ferrule over the braid.

a


bc

11

Ferrule

3

12

Strip the cable as Striping Dimensions.

1

Guide Pin

6. Cut the excess of braid if necessary.

Crimp the ferrule with crimping tool (see table).

1

1

2

2 1

Slide the sleeve over the ferrule and heatshrinkit in place (option).



ba

3.25 [.128] 2.5 [.098]

cCable Type

80-02-1A04-015LMR100/RG174/RG316

80-03-1M04-0023 [.118] 11 [.433]

1

2

2

1


A03


CMPTER

12

Body

Nut

Washer

2. Fold the braid back.Insert the insert sleeve into the cable (under thebraid) until the back surface flush with the cabledielectric.

4. Slide the nut over the cable assembly.

2

1

1. Slide the nut, the washer, the rubber and another washer onto the cable.


5. Screw sub-assembly into the body with wrench, recommended coupling torque see table.

1

a

Stripping Dimensionsc

b

Center Contact

Rubber Insert Sleeve

3. Slide the center contact on until it bottom against the cable dielectric. Solder the center contact.

1

80-03-4M18-006LMR195/RG58

P/NStripping Length (mm [in])

ba cCable Type

3 [.118] 5 [.197]

80-03-4M01-008 LMR40080-02-1M21-013

RecommendedCoupling Torque

450N·cm5 [.197]

3.5 [.138] 7 [.276] 9 [.354]


A04


CMPTER


1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.

3. Push the body under the braid.Slide the ferrule over the braid.

2. Fan the braid.

4. Crimp the ferrule with crimping tool (see table).

5. Place the cap into the body.

a


bc

13

Ferrule

3

12


1

6. Press on the cap until stops.Slide the sleeve over the ferrule and heatshrinkit in place (option).

Body

Cap

11

21

Solder the inner conductor.

1

2 1

80-13-1M04-010 LMR100/RG174/RG316

80-13-1M18-009 LMR195/RG58



ba cCable Type

5.41 [.213]

1.5 [.059] 18.5 [.728]11 [.433]3.25 [.128]

2 [.079] 17.5 [.689]7.5 [.295]

1


A05


CMPTER

14

BodyCenter Contact


1. Slide the heatshrink sleeve onto the cable (option).Strip the cable as Striping Dimensions.

21

2. Slide the center contact on until it bottom against the cable dielectric.

Solder the center contact onto the cable.

1

2

3. Slide the cable into the body until it stops.

4. Solder the body onto the cable.

1

5. Slide the heatshrink sleeve over the body and heatshrink it in place (option).

1

aStripping Dimensions

80-02-2A14-016

P/NStripping Length (mm [in])

aNotes

4.0 [.157]

Cable Type

Semi-rigid .141/RG402

MOUNTING HOLES


CMPTER

15

12.80 [.504 DIA.]

12.00 [0.472]

M01 M03

12.70 [0.500]

12.7

0 [0

.500

]

4- 3.4 [.134 DIA.]

11.30 [.445 DIA.]

9.00 [0.354]

9.70 [.382 DIA.]

M02

Office Adress: #45 ZhongShan East Road, ZhenJiang, JiangSu China.

Tel:+86 511 8443 6131 Fax:+86 511 8502 5485

Email: [email protected] Website: http://www.cmpter.com

Cmpter Electronics, Ltd.

Tnc connector series

Documents

Transcript of Tnc connector series