TM SIMPLE STANDARD COMPLEX - MANI
Transcript of TM SIMPLE STANDARD COMPLEX - MANI
3 Pack Conf igurations to Shape Canal Anatomy:
SIMPLE
Using the Standard Pack as an example:
1. ORIFICE SHAPING 2. INTERMEDIATE SHAPING 3. APICAL SHAPING 4. OBTURATION
STANDARD COMPLEX
.08/25 .06/25 .06/30 .08/25 .06/20 .06/25 .08/25 .04/20 .04/25
Recommended Motor Setting = 500 RPM / 300 g-cm
GROOVES:2 grooves = .04 Taper3 grooves = .06 Taper 4 grooves = .08 Taper
IDENTIFICATION
COLOR: File tip size
RUBBER STOPPER:Blue = 18mmWhite = 21mmYellow = 25mm
STRAIGHTCANALS
MILDLY CURVEDCANALS
MODERATELY& SEVERELY
CURVED CANALS
Predictable Results + Silky-Smooth FeelA Winning Combination
TM
Mani Silk Instruction Card1. Estimate the true working length (TWL) from the initial diagnostic radiographs.2. Prepare straight-line access. 3. Remove the Cervical Dentinal Triangle (CDT) & shape the coronal third.
The orifice opener is used with a brushing motion against the root wall of great-est thickness to remove the CDT (if present) and to shape the coronal third.
4. Establish and/or confirm apical patency. Mani D Finder hand files are pre-curved and used to negotiate the canal to the apex and achieve apical patency. Once apical patency is determined and/or the clinician reaches the estimated working length (determined from #1 above), an electronic apex locator can be used to determine the true working length.
5. Prepare a glide path.The Mani hand files of choice (D Finders, K-files, SEC O K Files—safe ended hand files) are then used to prepare a glide path to the true working length. A glide path has been prepared when a #20 hand K-file spins freely at the apex.
6. Prepare the Canal.Using Mani Silk, the canal is generally prepared from a smaller tip size to larger using the tactile recommendations and suggested motor settings (500rpm / 300g-cm). Mani Silk is used in a three second continuous and controlled passive insertion to resistance and removed. The canal is irrigated and recapitulated with a small hand file and the next Mani Silk file in the sequence is inserted in the same manner.
For example:SIMPLE PACK 1 .08/25 for Orifice Shaping. 2 .06/25 for Intermediate Shaping. 3 .06/30 for Apical Shaping (True Working Length). STANDARD PACK 1 .08/25 for Orifice Shaping. 2 .06/20 for Intermediate Shaping. 3 .06/25 for Apical Shaping (True Working Length). COMPLEX PACK 1 .08/25 for Orifice Shaping. 2 .04/20 for Intermediate Shaping. 3 .04/25 for Apical Shaping (True Working Length).
7. Additional Preparation of the master apical diameter.If the clinician wishes to prepare a larger master apical diameter, they can do so by whatever means desired. Additional Mani Silk files are available in sizes .04/30, .04/35, .04/40, .06/35, .06/40.
Mani Silk: A Complete SystemMani Silk Simple, Standard and Complex packs each contain 3 instruments. All sizes, including additional sizes, are available in 21mm and 25mm lengths.*
*Orifice Opener also available in 18mm length.
SIMPLE STANDARD COMPLEX ADD. SIZES LENGTHS
.08/25
.06/25
.06/30
.08/25
.06/20
.06/25
.08/25
.04/20
.04/25
21mm
25mm
.04/30
.04/35
.04/40
.06/35
.06/40
8-3 KIYOHARA INDUSTRIAL PARK, UTSUNOMIYA, TOCHIGI, 321-3231, JAPAN Phone: + 81-28-667-8592 Fax: +81-28-667-8593 Email: [email protected] URL: http://www.mani.co.jp