Titan® Bulk Emulsion
Transcript of Titan® Bulk Emulsion
Say Good-byeto ANFO!
Rough floors from poor toe breakage increases equipment maintenance and slows production
TITAN 1000ΔΕ and DIFFERENTIAL ENERGY systems makes it easy to optimize the explosive column load: more energy in the toe where it’s needed most, transitioning to a lighter load at the top. The result is uniform fragmentation and smoother floors
Wet holes complicate drilling and loading which make productivity predictions difficult
TITAN displaces water in wet holes and can provide variable density so, wet or dry, you can operate with one explosive and one pattern. And you’ll never need to de-water!
TITAN tends to stay in the borehole rather than migrating into voids and cracks. In these conditions, your blast results are typically more predictable and fragmentation more uniform
Problem geology causes flyrock, blowouts and poor fragmentation
TITAN’s ability to reduce powder factor and increased truck capacity means you are able to load larger patterns and shoot less often
Shooting every day increases blast-related liability risk
Whether drifting, stoping or sinking a shaft, DYNOMINER systems load fast and easy with a single operator
Inconsistent fragmentation slows production and increases downstream operating costs
Say good-bye to ANFO when you switch to TITAN
Labor shortages and slow cycle times limit advance rates in tunneling and shaft sinking projects
Post-blast NOX fumes
Increased security concerns and government regulation with ammonium nitrate prills
TITAN releases a higher percentage of available energy than ANFO (especially in 3” to 6” holes), shooting at a velocity that delivers high brisance in most rock types, resulting in superior fragmentation
TITAN is highly refined and can significantly reduce or entirely eliminate NOX fume generation from your shots
OUR SOLUTIONS
with
TITAN BULK EMULSIONS
YOUR CHALLENGES
TITAN XL 1000 / TITAN 1000ΔΕHOW IT WORKS
• A specialized DYNOBULK® truck transports unsensitized repumpable emulsion to the pattern
• Small quantities of gassing chemicals are blended into the emulsion as it is pumped into the blast hole
• The gassing reaction sensitizes the emulsion and expands it to the desired density
• Dyno Nobel’s gassing technology enables variable density from 0.90 to 1.25 g/cc to optimize blasting results
• Ideal for remote locations where a repumpable emulsion storage silo is all that’s needed for on site reloading
• Dyno Nobel’s DIFFERENTIAL ENERGY™ technology enables the accurate placement of multiple densities in the same blast hole
TITAN SME® (site mixed emulsion)HOW IT WORKS
• A specialized DYNOBULK SME truck transports heated ammonium nitrate solution and other raw materials to the pattern (none of these materials can be easily detonated)
• A patented mixing/pumping system combines the ingredients
• The mixture only becomes explosive after gassing occurs in the blast hole
• Dyno Nobel’s gassing technology enables variable density from 0.90 to 1.25 g/cc to optimize blasting results
• Dyno Nobel’s DIFFERENTIAL ENERGY™ technology enables the accurate placement of multiple densities in the same blast hole
TITAN 7000 RU (underground emulsion)HOW IT WORKS
• Repumpable emulsion is formulated for use with DYNOMINER® loading units in underground construction, quarry and mining operations
• DYNOMINER loading units are available in configurations designed for drifting, stoping or shaft sinking
• A variety of specialized TITAN 7000 RU formulations are formulated for uphole loading as well as concrete and sulfide ore compatibility
TITAN expanding to desired density
TITAN displacing water in wet hole
DYNOMINER operator loading TITAN 7000 RU