Tips on How To Apply A Screen Protector In Base
-
Upload
aashish-kumbhat -
Category
Documents
-
view
956 -
download
0
description
Transcript of Tips on How To Apply A Screen Protector In Base
you should line up
the screen
protector and
make sure that
every things fit.
Our films are cut accurately for easier
installation
Wet Tissue Cleaning Cloth
Clean the screen using the cleaning cloth or a wet tissue , if tissue
is too dry you can use a drop of water to make sure its moisten.
Dust and dirt is the
No.1 cause for
bubbles appearing
underneath, so
ensure the screen
is completely
clean.
Once the screen is clean..
Peel the label mark
No.1, this is the side
that goes on to the
screen,
Avoid touching the back of the screen protector to avoid
fingerprints,
Align the screen protector while you do
the installation.
Just peel of the label mark
no.2 and
You are done.
Don’t worry.,
first peal back the screen protector, use the piece of sticking tape and tap on the dust, on the screen and on the screen protector, unless fully free from dust.
If the film doesn't not sticks from the Label No.1 direction, try sticking the Screen Protector from the Label No.2 direction.
Rarely No.1 Label may be placed on the No.2 side, and to avoid wastage, film can be examined by inspection it’s surface on the screen.