This document (in entirety) is protected by the Copyright ...€¦ · Lines Drafting Service...
Transcript of This document (in entirety) is protected by the Copyright ...€¦ · Lines Drafting Service...
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
Sew
erm
ain
No.
32 M
anni
ng S
tree
t(L
ot 5
0 S
.P 1
83772)
Lot 51
Lot 49
41.26m
42.01m
20.0
m
20.0
25mLot 50 S.P 183772
Area 833 sq.mParish of BassettCounty of Carlisle
Proposed Residence
Note : Roofwater to be taken to street
Plumber/Drainer to locate House Connection
Proposed Pool
8m
4m
1.0
m
1.5
mM
in.
1.8
4m
6.0mMin.
Note : This approximate area falls in a Transport Noise CorridorState Controlled Road (Cat.2). Builder to comply with QDC MP4.4
2.2
1m
Builder to determine cut/fill levels
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
Patio Entry
Study Media
WIR Deck
Bedroom 4
MasterBedroom
Ens.
WBR
Bedroom 2
WIR
WIR
Bedroom 3
BathWCWIP
WIL
Family
Dining
Kitc
hen
Laun
dry
WC
Outdoor Area
Floor Area (Upper) :
Residence - 226.4 sq.m
Outdoor Area - 31.9 sq.m
Deck - 3.6 sq.m
Porch - 3.2 sq.m
1020
Lvrs
Lvrs820
12-0
4Lv
rs12-0
4Lv
rsDOWN
DOWN
290x290 Pier
88
0
700
10
00
1080
13
00
Con
sult
Owne
r
36
00
Desk1300 5
30 900
12-1
0Lv
rs12-1
0Lv
rs12-1
0Lv
rs
12-18OXXO
21-36SDOXX
12-18OXXO
12-1
2XO
09-06Hopper
09-06Obs.XO
12-15 XOObs.Safe
12-24OXXO
12-24OXXO
03-1
8Hop
per
12-24OXXO
15-15XO 2
1-1
8SD
12-24OXXO
Beam Beam
Beam
Bea
m
Bea
m
2/770CSD
820
720
770CSD 820 770
CSD
Br
600
90
0Ben
ch3
10
0
T
80
0
LOH
600
32
60
600
10
00
820
10
00
1800
Con
sult
Owne
r
820820
720
720
900
10
00
720
720
820LOH
720
CSD
90
0
11301000
Piers400x190
10°
15°
225301300 1800
9820 1790 7820
4180 3600 1500 1800 3400 2100
3830 2080 36001730 1800
70 190
190 190190
190 70
70
70
70707070Study Stairs Bedroom 4 W.C Ens.
WBRMaster BedroomLaundry
Deck
WIRMediaEntry
Patio
22530
7370 7150 8010
6900 28301300 900 2000 3000 3000 1800
700 6860 6860
3430 3430
70190
CL Pier
70 70 70
70 70
190WIRBedroom 2Bedroom 3WIR/BathW.CWIL/WIPKitchenFamily/Dining
Outdoor
14750
1800
2070
6180
1470
3230
1730
2000
5800
4700
5000
5000
1000
2400
2000
2000
190
70
190
530
190
70
70
70
70
70
70
W.CW
IPW
IL
Kitc
hen
Med
ia
Stu
dyEn
try
Patio
Fam
ily/D
inin
gO
utdo
or
14750
10220
1300
3230
5000
3200
1500
3700
1000
3230
1700
190
190
190
70
70
70 70
L'DRy/
Mas
t.Bed
/WBR
W.C
WIR
Bat
h
Ens.
Bed
2/3
WIR
1930
3000
2000
19070
Bed
room
4W
IR
Dec
k
45
0 O
verh
ang
NOTE : Building Materialsin this area to Comply with
QDC MP4.4 Transport Noise
Floor Area (Total) : 265.1 sq.m
18-10
Builder todetermine
configuration
ALL Structural Design to Engineer's Specifications
Void
Garage
Garage
Residence - 119.2 sq.mFloor Area (Lower) Total :
Store
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
820
820
SD
RET
AIN
ING
WALL
4800 Opening
21-4
8 P
anel
Lift
Doo
r
21-3
6 P
anel
Lift
Doo
r
UPUP
Beam
2070
8950
76501300
59801200
3830 2080
1120
23206180
19070
90
190
19070
Garage Store
Void
Stairs
8950
68601390700
6480
8570
190
190
190
Garage
Garage
14
75
0
38
70
61
80
47
00
38
00
58
00
45
10
190
190
190
70G
arag
eVoi
dG
arag
e
14
75
0
11
52
03
23
0
63
70
47
00
190
190
70
Sto
re
Concrete Floor1000 above Garage Floor
1200
1470
840
32
30
18-10
Builder todetermine
configuration
ALL Structural Design to Engineer's Specifications
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
Electrical Layout to be
finalised with Builder,Owner & Electrician
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
North Elevation
South Elevation
East Elevation
West Elevation
600 Overhangs
Sheet Roof 15°
Rendered Finish
10° Pitch in this Area
2400 M
in.
to C
eilin
gs
F.L Min. 225 A.G.L
Builder to determine Finished Floor Levels
Cut/Fills to be determiined by Builder
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
Nat. Surface
Tiedown as per Truss Manufact. Spec.
Sheet Roof to Manufact. Spec.Roof Pitch Varies 10° or 15°
Ceiling Battens Max. 450 Crs.Plasterboard Linings
190 Concrete Block Rendered or similar
Prefab Trusses or Rafters900 Crs.
Min. 2400 to Ceiling
Floor Levels Vary
600 Overhangs
Footings/Slab to Engineer's Design
Concrete Block ReinforcementDetails to Engineer's Design
Trusses/Tiedown to Manufacturer's Design
Details to Engineer's DesignBond Beam/Lintel Design
To suit Blocks
Ceiling/Roof Insulation to Manufact. Specifications
Builder to determine Final Floor Levels
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
Note : Termite Treatment in accordance with A.S 3660.1 (2000) is required.
An approved Vapour Barrier is to be applied.
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
Nat. Surface
600 at Outdoor
Tiedown as per Truss Manufact. Spec.
Sheet Roof to Manufact. Spec.10° at Porch 15° at Outdoor
Ceiling Hangers
Hardboard
if required.
or similar.
290x290 Block Pier at Porch
Prefab Trusses at Outdoor
To suit Dwelling
F.L to suit Dwelling
Footings to Engineer's Design
Beams to Manufact. Design
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
Insulation if Required
Final Floor Levels to be determined by Builder
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
Note : Termite Treatment in accordance with A.S 3660.1 (2000) is required.
An approved Vapour Barrier is to be applied.
400x190 Block Piers at Outdoor
Rafters at Porch
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
Consult Builder for Floor Levels
89501300
7650
8950
68601390
700
14
75
0
38
70
61
80
47
00
14
75
0
11
52
03
23
0
17253
Outside Face of Blockwork
190 Concrete Block
N.B. : It is the Responsiblity of the BUILDER/APPLICANT to Identify ANY/ALL IssuesIt is, ALSO, the Responsiblity of the BUILDER/APPLICANT to Address these Issues and/or Advise ALL Relevant Parties.
Relevant to Compliance wiith BCA and/or Local Authority Requirements (Codes, By-Laws etc).
'popular misconception' that alteration of an item by 10% and/or copying of 10% of an item is allowable (and does not constitute a
This document (in entirety) is protected by the "Copyright Laws of Australia; the copyright is owned (solely) by Lines Drafting Service.
Copyright Infringement); THIS IS INCORRECT. ANY Copyright Infringement may result in the pursuit of Legal Remedy and Compensation.
(in any form, in part, or, in whole, for any purpose) without the written consent of the copyright holder. (PLEASE NOTE that it is a Lines Drafting Service retains ownership of the associated Intellectual Property. These documents cannot be altered or reproduced
Consult Builder for Floor Levels
Consult Builder on Stepdown
Consult Builder on StepdownConsult Builder on Stepdown
22530
9820 78201790
20
00
18001300
22530
7370 7150 8010
6860 1497070
0
14
75
0
10
22
04
53
0
32
30
13
00
14
75
0
38
70
61
80
47
00
20
70
18
00
32
30
14
70
26923
Outside Face of External Blockwork
190 Concrete Block