Slide 1

Thermo-mechanical infrastructure: Environmental Monitoring with FOS AIDA WP9.3 meeting November 21 th DESY, Hamburg. David Moya Martin Instituto de Fsica de Cantabria (CSIC-UC )

Slide 2

Outline FOS sensor for the environmental and structural monitoring Fiber optical sensors interrogator at Desy _ First transnational access: Belle II PXD-SVD common Test Beam ( January 2014). Current cases of use: _ Thermal characterization of the cooling system for Belle- II PXD. _ Deformations Real time Monitoring ( AIDA demonstrator) Current and future FOS R&D for particle physics. 2 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 3

FOS for environmental and structural monitoring industry driven technology 3 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 4

FOS for environmental and structural monitoring Most interesting for us: _ Light-weight, miniaturized, flexible, _ Very fast response, very small thermal inertia, can spot fast temperature changes. Other attributes _ Immunity against: High electromagnetic fields, high voltages. High and low temperatures. (4 K to 1200 K). Nuclear radiation environments (not in all the cases) _ Multiplexing capability (sensor network) _ Embedding in composite materials. _ Wavelength encoded ( neutral to intensity drifts) 4 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 5

Fiber optical sensors interrogator at Desy A dynamic interrogation unit at DESY (SM130-200) Main characteristics: _ Four reading channels _ Maximum interrogation speed of 100 Hz _ Range 60 nm (Maximum of 11-12 sensors per channel) _ Stability 5 pm (0.5C, 5ustrain) System completed with r/o software and distributed sensor network 5 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 6

First transnational access First transnational access : Belle II PXD-SVD common test beam at DESY _ Two PXD Layers+ four SVD layers with a thermal enclosure of dry air, all inside PCMAG magnet 6 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013. _ PXD sensor CO2 cooling _ The aim is to measure temperature and humidity, and if possible relative displacements between sensors layers Test beam finished by 2 nd of February, then accessible for other transnational access.

Slide 7

New Thermal testing of PXD (Belle-II) thermo-mechanical mock-up. Monitoring temperatures and humidity under a nitrogen atmosphere ( instead of dry air) of sensors in Belle-II PXD Valencias thermo- mechanical mock-up during cooling cycles. It turns out to be a useful tool for diagnosing the thermal mock-up conditions and to improve it. 7 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 8

New Thermal testing of PXD (Belle-II) thermo-mechanical mock-up. 8 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013. Temperature measured with, FBGs ( Temp, humidity) and PT100

Slide 9

PXD thermo-mechanical mock-up (3) 9 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013. 9 Enviromental measurement

Slide 10

PXD thermo-mechanical mock-up (4) 10 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013. 10 Very fast response to a fail of the mock-up CO 2 cooling system

Slide 11

Deformations Real time Monitoring ( AIDA demonstrator) Real time Monitoring ( AIDA demonstrator). Within AIDA project a first self monitoring structure manufactured This demonstrator is CFRP plate with eight FBG sensors (four per side ) embedded at a define position to allow us to measure deformations under Torsion and Flexion loads. (Each sensor position optimized to measure one of the deformations) 11 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013. Flexion sensors Torsion sensors Top layer Botton layer

Slide 12

Deformations Real time Monitoring (AIDA demonstrator) time Monitoring ( AIDA demonstrator). the expected sensors signal change to each load, structure deformation, temperature and vibration can be monitor A first demonstrator has been manufactured and will be tested this year 12 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 13

Deformations Real time Monitoring (AIDA demonstrator) ormations Real time Monitoring ( AIDA demonstrator). In AIDA thermo-mechanical set-up infrastructure there will be integrated a displacement measurement optical system. Our idea is to go with the technological demonstrator and compare the deformation measurements of both systems. 13 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 14

Our current and (expected) future R&D on FOS Continue the study of FOS resistance to different radiations ( gamma, electrons, neutrons) as function of the coating and doping types and level of the sensor fiber. Intercalibration of Aida demonstrator with AIDA thermo- mechanical set up, under torsion and traction loads. Design, installation and commissioning of a real time structural and environmental monitoring (temperature, movements, vibrations and humidity) of PXD and SVD sub detector at Belle-II (jointly with INTA, IFIC and HEPHY) Study in more detail the possibility of using FOS for humidity monitor inside trackers volumes 14 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013.

Slide 15

Concluding remark New proposal for using the FBG sensors in your prefered setup are welcome. 15 D.Moya, moyad@ifca.unican.es - DESY, 22th Nov. 2013. THANK YOU !