theft prevention STI exit Stopper - Comsec STI-6400, STI-6400WIR, STI-6400WIR4 & STI-6402WIR...

Click here to load reader

  • date post

    11-Aug-2020
  • Category

    Documents

  • view

    3
  • download

    0

Embed Size (px)

Transcript of theft prevention STI exit Stopper - Comsec STI-6400, STI-6400WIR, STI-6400WIR4 & STI-6402WIR...

  • theft prevention

    For more information, call 1-800-888-4784 (4STI) or visit www.sti-usa.com

    FeaTureS · User can select whether to use as an

    alarm or annunciator.

    · May be mounted on top, right, left or next to almost any door.

    · 105 or 95 dB warning horn.

    · In exit alarm mode, alarm can be set to sound for 30 seconds, 3 minutes or indefinitely (unless disarmed with key supplied or until battery is drained).

    · In annunciator mode, it announces door entry with a set of 10 beeps.

    · May be programmed for 15 second entry delay or immediate alarm.

    · Detects both unauthorized exits and entries.

    · Recommended operational temperature range is 32° to 113°F.

    · Unit is completely self-contained.

    · STI-6400WIR supervised wireless 433 mhz (with 4 or 8-channel receiver). Up to 1000 foot (line of sight) range.

    · STI-6402 provides protection for double door applications with two sets of reed contacts.

    · STI-6403 allows for remote horn to be located 300 feet from the door it is protecting - 18 gauge wire not included or electrically supervised.

    · STI-6404 provides protection for double doors and has remote horn capabilities (18 guage wire not included).

    · STI-6405 allows keyholder to reset the alarm, unit cannot be turned off.

    · STI-6406 can be operated from both sides of the exit/entry door.

    · Highly visible “stop sign” design acts as a deterrent.

    · Arming delay allows unit to arm following authorized exits.

    · Available in red or green.

    · Easy to install...much less expensive than heavy horizontal bar type units... and practical for all emergency doors.

    · Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).

    ProducT overvIew The highly effective Exit Stopper can serve as an inexpensive security device and help stop theft by alerting you to any unauthorized exits or entries through emergency exit doors.

    how IT workS If the protected door is opened, the electronic Exit Stopper emits an ear piercing alarm for 30 seconds, 3 minutes or continuously (as preset by the user). A key operated override will silence the alarm and allow authorized exits. The unit can be set for a 15 second delay before arming or tripping. Exit Stopper “Always Active” allows the key holder to reset the alarm, but does not allow the alarm to be turned off. Exit Stopper is fitted with a 9 VDC alkaline battery. It is available in red or green for almost any type of door, mounting or installation, including remote placement of the alarm (not for outdoor use).

    STI exit Stopper®

    STI-6406

    STI-6400

    STI-6405

    Wireless Now Available

  • Printed in U.S.A., © 1987 - 2009 Safety Technology International, Inc.

    2306 Airport Road Waterford, Michigan 48327, USA

    Tel: 248-673-9898 Fax: 248-673-1246 Toll-free: 800-888-4784 [email protected] www.sti-usa.com

    Unit 49G Pipers Road Park Farm Industrial Estate Redditch, Worcestershire B98 OHU England

    Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 Free: 0800 085 1678 (UK) www.sti-europe.com

    06/11Subject to change without notice.

    STI exit Stopper® Dimensions and Technical Information

    modelS avaIlable STI-6400 Exit Stopper multifunction door alarm STI-6400WIR Wireless Exit Stopper multifunction door alarm STI-6400WIR4 Wireless Exit Stopper multifunction door alarm with

    4-Channel Receiver STI-6402 Exit Stopper multifunction door alarm for double door

    installation STI-6402WIR Wireless Exit Stopper multifunction door alarm for

    double door installation STI-6403 Exit Stopper multifunction door alarm with remote horn STI-6404 Exit Stopper for double door with remote horn STI-6405 Exit Stopper multifunction door alarm with “always

    active” feature STI-6406 Exit Stopper with dual access control STI-6453AED Replacement siren alarm STI-34104 4-Channel receiver STI-34108 8-Channel receiver STI-30104 Lamp controller SUB-6403 Remote horn to use in conjunction with all above exit

    alarm models or to replace remote horn in STI-6403 06402 Magnet and reed switch with spacers 16200 Warning “Door Alarmed” label

    SPecIFIcaTIonS Housing 1/8 in. Polycarbonate Power Source 9 VDC Alkaline or 12-24 VDC Wired Warning Horn 95 dB - Low at 1 foot 105 dB - High Relay Contacts Form C Dry 0-30 Volts AC/DC, 1 Amp Dimensions 5.375 in. x 5.375 in. x 2 in. 137mm x 137mm x 51mm Standby Current 10 uA Alarm Current 200 mA Recommended 32°F to 113°F Operating (0°C to 45°C) Temperature

    FeaTure JP2 JP3 JP4 JP5 JP7 Volume- (105 dB) at 1 foot ON*

    Volume- (95 dB) at 1 foot OFF

    Duration- 30 Second Alarm OFF* OFF*

    Duration- 180 Second Alarm OFF ON

    Duration- Continuous Alarm ON OFF

    Duration- Annunciator Mode ON ON

    Trip- Immediate OFF*

    Trip- 15 Second Delay ON

    Arming- Immediate ON*

    Arming- 15 Second Delay OFF

    *Factory Settings

    STI-30104 LAMP CONTROLLER (OPTIONAL)

    AC ADAPTER

    GREEN LED

    TRANSISTOR OUTPUT JACK

    RECEIVER ANTENNA

    SPEAKER

    STI-34104 INDOOR RECEIVER

    BUTTON

    RED LED

    SENSOR TRANSMITTER CAP

    SENSOR TRANSMITTER BASE

    MOUNTING TUBE CAP

    WALL MOUNT (INCLUDED) NOT NEEDED FOR POLE MOUNT INSTALLATION

    2 “C” BATTERIES (NOT INCLUDED)

    SENSOR TRANSMITTER

    12”MOUNTING TUBE

    MOUNTING STAKE

    SENSOR TRANSMITTER BOTTOM

    SENSOR TRANSMITTER

    MOUNTING TUBE CAP

    MOUNTING STAKE

    SENSOR TRANSMITTER BOTTOM SCREWS

    RECHARGEABLE NiMH BATTERIES

    H L

    SENSITIVITY JUMPERS (SOLAR TYPE)

    SENSITIVITY JUMPERS (BATTERY TYPE)

    HL

    FINGER NOTCHES

    REMOVE PLASTIC TAB FROM BATTERIES

    DRIVEWAY

    3’OR LESS

    25' OR MORE

    PLACE SENSOR TRANSMITTER 3' OR LESS FROM EDGE OF DRIVEWAY AND 25' OR MORE FROM STREET.

    12’ MAX

    DRIVEWAY

    PLACE SENSOR TRANSMITTER 3' OR LESS FROM EDGE OF DRIVEWAY AND 25+ FEET OR MORE FROM STREET.

    25' OR MORE

    3' OR LESS

    12' MAX

    +

    +

    -

    B

    DETAIL B SCALE 2:1

    B

    C

    H L

    -

    +

    +

    -

    B

    -

    FINGER NOTCHES

    DO NOT PULL ANTENNA!

    WALL MOUNT (INCLUDED) NOT NEEDED FOR POLE MOUNT INSTALLATION

    SENSITIVITY ADJUSTMENT

    SENSITIVITY ADJUSTMENT

    POWER CONNECTOR ANTENNA CONNECTOR

    12”MOUNTING TUBE

    GREEN LED

    TRANSISTOR OUTPUT JACK

    RECEIVER ANTENNA

    SPEAKER

    BUTTON

    RED LED

    POWER CONNECTOR ANTENNA CONNECTOR

    STI-34104 STI-34108

    POLYCARBONATE COVER

    POLYCARBONATE BASE

    120 dB HORN

    ALARM DURATION

    ALARM TRIP DELAY

    EXIT DELAY VOLUME

    VIEW OF THE CIRCUIT BOARD

    EMERGENCY EXIT ONLY STOPSTOP

    ALARM SOUNDS WHEN DOOR IS OPENED

    ON OFF

    EMERGENCY EXIT ONLY STOPSTOP

    ALARM SOUNDS WHEN DOOR IS OPENED

    ON OFF

    FLANGES SLOTS

    TERMINAL STRIP

    9 VOLT BATTERY

    19011 TAMPERPROOF SCREW (1) PROVIDED

    19016 TAMPER WRENCH (1) PROVIDED

    BASE

    COVER

    19014 MOUNTING SCREW (4) PROVIDED

    EMERGENCY EXIT ONLY STOPSTOP

    ALARM SOUNDS WHEN DOOR IS OPENED

    ON OFF

    19039 SCREW 6 x 1 1/4 in.

    (2) PROVIDED

    19018 ANCHOR (2) PROVIDED

    BOTTOM SURFACE AS SHOWN WIRES THROUGH NOTCH ON AND ROUTE REED SWITCH REMOVE FRONT COVER

    VIEW SHOWING MAGNET INSTALLATION

    MAGNET

    DOOR

    DOOR STOP

    JAM

    MAGNET

    6400 UNIT

    MAGNET MUST BE INSTALLED OPPOSITE RAISED RIB ON OUTER COVER.

    SPACERS - USE AS NECESSARY

    19018 ANCHOR (2) PROVIDED

    TYPICAL FLUSH MOUNT DOOR JAM INSTALLATION

    DOOR SWING

    NOTE: 2 SPACERS MUST BE USED ON STEEL DOORS

    19039 SCREW 6 x 1 1/4 in. (2) PROVIDED

    MAGNET

    6400 UNIT

    DOOR STOP

    SWING DOOR

    TYPICAL RECESSED MOUNT DOOR JAM INSTALLATION

    3/4 in. [19 mm] MAXIMUM GAP 3/8 in. [9.5mm] ON METAL DOOR AND FRAME

    NC COM NO GD V+ RS1 RS2 KEYSW

    TERMINAL BLOCK WIRING CONNECTIONS

    FO RM

    C D

    RY CO

    N TA

    CT S

    RE M

    O TE

    PO

    W ER

    IN PU

    T 9-

    24 V

    D C

    RE ED

    SW IT

    CH TE

    RM IN

    A LS

    KE Y

    SW IT

    CH TE

    RM IN

    A LS

    INTERNAL REED SWITCH (RS1)

    06402 REED SWITCH (RS2)

    OPTIONAL: TO REMOTE

    HORN STI-6403

    VIEW SHOWING INSTALLATION OF ADDITIONAL REED SWITCH 06402

    TO KEY SWITCH

    TERMINAL BLOCK

    ALARM DURATION

    ALARM TRIP DELAY

    EXIT DELAYVOLUME

    VIEW OF THE CIRCUIT BOARD

    19016 TAMPER WRENCH (1) PROVIDED

    19011 TAMPERPROOF SCREW (1) PROVIDED

    9 VOLT BATTERY

    TERMINAL STRIP

    SLOTSFLANGES

    COVER 19014 MOUNTING SCREWS (4) PROVIDED

    BASE

    MAXIMUM GAP 3/4 in. (19mm) 3/8 in. (9.5mm) ON METAL DOOR AND FRAME

    SPACERS (USE AS NECESSARY) NOTE: 2 SPACERS UNDER BOTH MAGNET AND REED SWITCH MUST BE USED ON STEEL DOORS

    MAGNET ASSEMBLY (SEE ABOVE FOR INSTALLATION)

    aPProvalS & warranTy

    POLYCARBONATE COVER

    POLYCARBONATE BASE

    120 dB HORN

    ALARM DURATION

    ALARM TRIP DELAY

    EXIT DELAY VOLUME

    VIEW OF