The MINIKO High Precision Semi-automatic SMT Stencil Printer.
-
Upload
baldric-henry -
Category
Documents
-
view
239 -
download
7
Transcript of The MINIKO High Precision Semi-automatic SMT Stencil Printer.
The MINIKOHigh Precision Semi-automatic SMT Stencil Printer
MINIKO – Semiautomatic Printer
Summary High flexibility for small batches Table top or stand alone model Rigid construct, high accuracy design Programmable printing head Borderless printing on boards up to 450 x 500mm Prints on single or double-sided PCB‘s, ceramics and foils Highly intuitive touch screen based operation Product printing parameters stored on internal flash drive Dual camera system for precise alignment Laser guided camera set up Self-leveling, dual squeegee print head Motor driven squeegee drive Programmable snap-off speed and distance Large variety of board support options Up to 23” stencil frames Pneumatic fixation of frames for secure printing Versatile adapters for other frame formats 2 or 4 sided tension frames
Compact and Flexible for Fastest Set-up
Ideal for highly flexible low volume production or R & D environments Fast set up and product change over Rigid construction, high accuracy design based on high volume printing technology Generous 5.7” colour touch screen for intuitive, easy operation Integrated dual-vision system for perfect alignments Fully programmable parameters
Versatile Printer
Borderless printing on boards up to 450 x 500mm / 17.7 x 19.7” Prints on:-
Single and double-sided PCB‘s Ceramics Foils Special applications on request
Fully Programmable Printing Head
Self-leveling, motorised, dual squeegee print head Programmable squeegee pressure Programmable print speed and stroke travel Large variety of squeegee types for all purposes:-
Metal squeegees Rubber squeegees (60, 70, 80, 90 shore / others on request) Flood blades
Available lengths: 150, 220, 300, 360, 420, 450, 460, 520 , 608 mm Standard Angle: 60° (others on request)
Intuitive User Interface
Product Set Up• Print speed (front/rear)• Squeegee pressure (front /rear)• Snap off speed and distance• Print Gap• Printing modes (Print/Print, Print/Print, Flood/Print)
Highly intuitive colour touch screen Fully programmable printing parameters for repeatable printing results All parameters can be saved under individual product names
Calibration• PCB to stencil contact height• Squeegee zero pressure points• Printing stroke
Production • Start process• Move table to print height• Snap off• Vacuum operation• Open the machine
System Settings• Full machine diagnostics• General Settings
Vision Based Alignment System
Through stencil vision system Dual CCD colour cameras 10x digital zoom for precise alignment Generous 5.0” dual TFT colour displays Laser guided camera set up for fast and easy change over
Integrated Snap-off Control and Print Gap
High precision printing possible due to full control Programmable snap-off speed and distance Precise servo motor control for perfect board/stencil separation Snap-off settings stored with all other printing parameters Programmable Print Gap for non-solder paste printing applications
Stencil Frame Configurations Frame slide in system in base machine included
For stencil frames up to 23”
Versatile adapters for other frame formats and types:-
Adjustable adapters
Adapters for non-Reprint stencil frames
Adapters for screen frames
Pneumatic fixation of frames and adapters for secure printing
PCB Tooling Options
Manual Tooling Single support pins (Conical, Flat or Spindal) Vacuum support pins
Automatic Tooling: Red-e-Set Independent, spring-loaded, non-abrasive support pins Pins lock in place to fit board’s contour and for repeat
usage No need for special connections with printer
Vacuum Tooling Plate Options
Tension Frame System
Two side tension systems for lower volumes Four side tension frame system for best results
Pneumatically tensioned no need for a machine connection during printing
No license fees for producing stencils as on other systems Easy set up and handling Stencil storage systems additionally available
Specification REPR-TF23-438 // 4-Side tension frame
Dimensions outside 23x23" (584x558mm)
Stencil dimensions 20.5x20.5” (520x520mm)
Max. Printing area 438x438mm (17.2x17.2")
Frame height 40 mm (1.5")
Air tube included, tube outer diameter 6 mm, quick connection to frame, air regulator and manometer to be provided by customer
Air pressure Max. 6 bar (87 psi) for stencil thickness of >150 mm (>6 mil)Max. 4 bar (58 psi) for stencil thickness of 100-150 mm (4-6 mil)
Worldwide Support
Built to last All Reprint machines are built based on highest quality levels for lowest cost of
ownership
Comprehensive machine manuals Including detailed information
Local support Local support organizations in all major areas
2nd level support Directly from headquarters / manufacturer
About Reprint
Printing Specialist since 1999 Launched in 1999, the company’s founders, having already gained many years experience and expertise in
the printing industry, have laid the ground to a successful company specialising in printers for the SMT (Surface Mount Industry) and related sectors.
All development and manufacturing is conducted in-house Proven, standardizes products for inline, batch or stand alone machines High flexibility also for adaptations or special processes
Well established network of distributors and business partners for local support With many hundreds of installations worldwide, from small to large international customers, Reprint has
proven itself as a reliable, trustworthy and significant partner in the printing industry Today’s products cover the following market segments and machines:
SMEMA compatible inline machines for OEM’s and Contract Manufacturers for mid to high volume productions
Batch printers for flexible production environments and special printing applications Table top printers for low volume productions, prototypes and NPI (new product introductions) Specialized printers for long board LED applications Customized printers for special applications (Hybrid, PV and other industries)
Contact Details
Reprint Limited 10 Enterprise Park, Piddlehinton, Dorchester, Dorset, United KingdomDT2 7UA
Tel: +44 (0)1305 849254 Fax: +44(0)1305 849289 Email: [email protected]
www.reprintservices.co.uk
Reprint contact for Sweden & Denmark