The Hammerman EMS Series Vibrators min
-
Upload
the-hammer-manufacturing-and-research-company-limited -
Category
Documents
-
view
226 -
download
1
Transcript of The Hammerman EMS Series Vibrators min
Tel: 01543 677290 . 0845 7 519519 07775 710648 @thehammermanco www.plasticpiling.co.uk
The Hammerman Equipment
Handheld Hammers Plastic Piling Mandrels
EMS Series Piling Vibrators
EMS Series Piling Vibrators including The evolved mini hammer - The ESF03
Quieter than air hammers
Can drive and extract sheets
No lubrication pollution
Compact and moveable power source
Suitable for plastic piling
EMS Series Mini Piling Vibrators The sight of small air hammers driving trench sheeting on the UK waterways is an established method
entrenched in the history of the inland waterways. They are available in small sizes, effective and easy to
use; but with high noise levels and polluting lubricant, continued use is primarily a direct result of the lack of
alternative, more modern means of driving trench sheeting and plastic piling.
With this in mind The Hammerman is extremely pleased to broaden our portfolio, of innovative pile driving
equipment, by adding the EMS range of vibrators. These include excavator mounted and suspended
models, high and standard frequency models are also represented in the range. The range is expanding
continuously, both in terms of the smallest and largest offerings. This stands the EMS group apart from
their competition, never before have we encountered a supplier so willing to develop products to suit the
customer requirements. The result on this is a very impressive range The starting with the worlds smallest
vibrator, the ESF03 weighing 160 kgs and offering a 3 tonne force to one of the worlds largest, the
ESF200CB weighing in at over 20 tonnes with 454 tonnes force. Whilst work continues on an even small
unit, the ESF01, the range still boast 5 sizes all under 1 tonne in weight, and it is these that are the focal
point of our range.
The majority of the range are B design, with the elastomers mounted on top of the vibration generator,
however, due to customer request models 6, 7, 8 and 12 are now available in a M design, a shorter design
with elastomers around the vibration generator.
Key to our range is the ESF03 unit, which not only is the worlds smallest unit, but can be excavator
mounted or suspended and run off a separate small powerpack. The key feature of the ESF03 is the small
size of the powerpack. The ESF03 can be run of a standard 30 litre powerpack, and so provide an
exceptionally portable pile driving combination. This combination has been introduced primarily for our
riparian contractors, piling off workboats too small to accommodate a traditional powerpack vibrator or with
insufficient connections or hydraulics to power our existing EMV’s off the mounted boom or crane arm.
The ESF03 is suited for use with 1-3 tonne mini excavators and so enable sites to work from the towpath
rather than water side. This fact alone will make many more schemes viable, previously only serviceable by
noisy air hammers.
Models ESF1-4 can also be excavator
mounted, or run of a bespoke pack, the
PS120, that provide up to 120 litre at 300bar
and weighs 1.6 tonnes.
Specifications
The Hammerman Equipment Plastic Piling Company
Model
03 1 2 3 4 1 Midi
Centrifugal force kN 33 62 258.3 297 332 37
Eccentric Moment kgm 0.33 0.9 2.3 3 4 0.9
Frequency rpm 3000 2500 3200 3000 2750 2000
Amplitude mm 5.5 6.2 9.2 11.7 13.7 6.2
Total Weight kg 160 375 610 635 810 375
Dynamic Weight kg 120 290 495 515 585 290
Power kW 7.5 23.8 60 60 60 10.12
Flow l/min 30 57 110 110 110 44
Pressure bar 150 250 320 320 320 138
Max crowd force (Push) kN 10 20 40 40 40 20
Max Line Pull kN 15 30 60 60 60 30
Model 1 has two specifications shown depending
upon what pack is used with it; the midi pack vs
fully powered. Other Models available upon
request High frequency units suspended or
excavator mounted - with forces as high as 94
tonnes (Model 12).
ESF No.6,7,8 & 12 available in B and M Designs.
Standard Frequency suspended units up to 454
tonnes force (ESF200-C).
C designs incorporate bearing cooling and
greater reaction mass to facilitate installation into
clay soils.
The Hammerman Equipment Unit 19 Cinder Road Zone 3 Burntwood Business Park Burntwood Staffs WS7 3FS www.plasticpiling.co.uk @thehammermanco www.facebook.com/TheHammermanCo
The worlds smallest piling vibrators