The following demo demonstrates features and benefits of the Fasfold CNC controller when retrofitted...
-
Upload
kaylyn-beckford -
Category
Documents
-
view
215 -
download
1
Transcript of The following demo demonstrates features and benefits of the Fasfold CNC controller when retrofitted...
The following demo demonstrates features and benefits of the Fasfold CNC controller when
retrofitted to a new or used Pressbrake.
It can be retrofitted to Nut stop as well as Hydraulic stop machines from 1 to 4 axis
It can utilize AC or DC servo control
There are 39 slidesUse the left mouse click to go to the next slide.
Use the Backspace key to go to the previous slide.You can also run the actual Fasfold program from your desktop.
It uses a 15 “color touch screen which makes it lightning fast to alter or enter things.
Press on the quickdraw button to go to the quickdraw screen
Press here for the start of the profile
Press here for theFirst dimension
Then here for the first bend
Then here for the second bendThe grid size can
Be changed here
Then here for the third bend
Undo the last bendwith this button
Then here for the forth bend
Then here for the fifth bend
Use the draw/Edit buttonTo modify the profile
Press here
Then here to move the
corner out here
Press OK to return to Main screen
Press on any dimensions or angleHere to alter or fine tune
Press on the collusions button to work out an automatic
bend sequence
Press second
Press first
Press last
Then press OK
This is the bend sequence for this job - 12543
The bend sequence canAlso be set manually
By using this button
By pre
ssing
collu
sions
Bend sequence can be set Automatically to
avoid collusions
This is the 5th fold done third
This is the 4th fold done forth
By touching the numbers below you can step through
the folds quickly withoutmaterial or time waste
Each fold can be simulated and inspected
It is quick to work out thefastest method by changing
sequence or Folding from rear rather than front of material
This is the 3rd fold done last
The dimensions and angles can also be fine tuned here
The Job name butto
n is use
d
to enter a new name
Alphanumeric names can be given
Use Open and Save to save or open Jobs
from the Library
Use these to scroll to the next/previous page
Select the appropriate Job by pressing on it
-Sign indicates bend is donefrom the back of the material
Angle Trim value
The job opens with ALL relevant data – Bend Sequence,
Right tool & Die, correct V, Material thickness and width,
which bends was done inserting material from the back etc.
Blue (-) indicates fold done from the bottom
Blue (-) indicates fold done from the back
Press on the DIE to go to the Die screen
Draw up a new Die by entering the first
V Width on the left,
Then the angle in this column,
Then which side it is on 1,2,3 or 4,
Then the distance from the edge
Then the height, width and tool name
You can also press open
to select a Die previously saved
Finally press save to store it in the library
Select the Die needed for the job by pressing
on the Die
Use these to scroll to the next/previous page
Press on the Tool to go to the Tool library
Use these to scroll to the next/previous page
Select the Tool needed for the job by pressing
on the Tool
Press Download to send the Data to the
PLC on the machine
Jobs can also be downloaded from the office
Press Start to run the job
Next will advance from 1 bend to the next as
using the footswitch does
Select between Auto and Manual return
Calibrate takes one To the Setup and Calibrate screen
Valves
X and Y calibration
Backgauge (X) Motor, encoder and limit switches
This is used for Diagnostics.All inputs and outputs change between green and red. It is
easy to locate problems
Ramgauge (Y) Motor, encoder and limit switches
Top and Mute switches
Foot switches
X parameters, fast speed,
slow speed, Tolerance etc. Y parameters, fast speed,
slow speed, Tolerance etc.
Force needed to do the job