The design of the „DOMINO”-knife gate valves fulfils the ...
4
P R O C E S S T E C H N I K G M B H Knife gate valve without gland packing The knife gate valve „system DOMINO“ is preferably used in the field of water treatment and process engineering. The valve is the right solution for media containing mud and fibers. The knife gate valve seals pressure tight in both flow directions. The user can choose among a variety of executions and actuators.
Transcript of The design of the „DOMINO”-knife gate valves fulfils the ...
Germany
Germaniastraße 28D-44379 Dortmund
Phone 0049-2 31-610 09-0Fax 0049-2 31-610 09 80
P.O. Box 70 01 10D-44371 Dortmund
Subject to changes
DOMINO AT 100Wafer type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200: PN 10
DOMINO AT 200Lug type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200 – DN 1200: PN 10
The valve can be used as dead end valve.
DOMINO AT 200 RControl knife gate valve
DN 50 – DN 600
ExecutionsBody: Cast iron GG-25, EKB-coated (option GGG 40)
Gate: 1.4301 (option 1.4571)
Seal: NBR, EPDM, FPM, MVQ, PTFE
Mounting parts: steel, EKB-coated or zinc coated
Stem / piston: 1.4021 (option: 1.4571) rising or non rising
OperationHandwheel
Square
Gear box
Pneumatic cylinder
Hydraulic cylinder
Electric actuator
Special executionsValve with regulation port
Full bore
Square valve
AccessoriesMechanical limit switches
Proximity switches
Solenoid valves
Positioners
Stem extensions and pillars
DOMINO knife gate valve with stem extension and pillar
Non-rising extension
P R O C E S S T E C H N I K G M B H
Knife gate valve without gland packing
The knife gate valve „system DOMINO“ is preferably used in the field of water
treatment and process engineering. The valve is the right solution for media
containing mud and fibers.
The knife gate valve seals pressure tight in both flow directions.
The user can choose among a variety of executions and actuators.
The design of the „DOMINO”-knife gate valvesfulfils the users’ highest requirements:
The maintenance-free COMPACT cross
seal (double seal lip profile) guarantees
tight shutoff and can be adjusted without interrupting
the working process.
The self-cleaning effect is achieved by
flush-out corners in the body and the
cutting edge underneath the gate.
Solids and fibres are cut by the cutting edgebefore tightening is done against the elastic seat.
The guidance of the gate is interrupted on stroke length,
thus dirt can be ejected.
Bidirectional shutoff is achieved by the lateral
gate surfaces and the elastic seat which is integrated
in the body.
The seat is chambered and prestressed mounted.
The high finish of the guide- and sealing
surface at both sides guarantees
long service and tight shutoff.
The lateral guidance of the gate prevents the gate from
fluttering in either of the flow directions or in throttle
positions.
Germany
Germaniastraße 28D-44379 Dortmund
Phone 0049-2 31-610 09-0Fax 0049-2 31-610 09 80
P.O. Box 70 01 10D-44371 Dortmund
Subject to changes
DOMINO AT 100Wafer type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200: PN 10
DOMINO AT 200Lug type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200 – DN 1200: PN 10
The valve can be used as dead end valve.
DOMINO AT 200 RControl knife gate valve
DN 50 – DN 600
ExecutionsBody: Cast iron GG-25, EKB-coated (option GGG 40)
Gate: 1.4301 (option 1.4571)
Seal: NBR, EPDM, FPM, MVQ, PTFE
Mounting parts: steel, EKB-coated or zinc coated
Stem / piston: 1.4021 (option: 1.4571) rising or non rising
OperationHandwheel
Square
Gear box
Pneumatic cylinder
Hydraulic cylinder
Electric actuator
Special executionsValve with regulation port
Full bore
Square valve
AccessoriesMechanical limit switches
Proximity switches
Solenoid valves
Positioners
Stem extensions and pillars
DOMINO knife gate valve with stem extension and pillar
Non-rising extension
Knife gate valve without gland packing
The knife gate valve „system DOMINO“ is preferably used in the field of water
treatment and process engineering. The valve is the right solution for media
containing mud and fibers.
The knife gate valve seals pressure tight in both flow directions.
The user can choose among a variety of executions and actuators.
The design of the „DOMINO”-knife gate valvesfulfils the users’ highest requirements:
The maintenance-free COMPACT cross
seal (double seal lip profile) guarantees
tight shutoff and can be adjusted without interrupting
the working process.
The self-cleaning effect is achieved by
flush-out corners in the body and the
cutting edge underneath the gate.
Solids and fibres are cut by the cutting edgebefore tightening is done against the elastic seat.
The guidance of the gate is interrupted on stroke length,
thus dirt can be ejected.
Bidirectional shutoff is achieved by the lateral
gate surfaces and the elastic seat which is integrated
in the body.
The seat is chambered and prestressed mounted.
The high finish of the guide- and sealing
surface at both sides guarantees
long service and tight shutoff.
The lateral guidance of the gate prevents the gate from
fluttering in either of the flow directions or in throttle
positions.
Germany
Germaniastraße 28D-44379 Dortmund
Phone 0049-2 31-610 09-0Fax 0049-2 31-610 09 80
P.O. Box 70 01 10D-44371 Dortmund
Subject to changes
DOMINO AT 100Wafer type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200: PN 10
DOMINO AT 200Lug type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200 – DN 1200: PN 10
The valve can be used as dead end valve.
DOMINO AT 200 RControl knife gate valve
DN 50 – DN 600
ExecutionsBody: Cast iron GG-25, EKB-coated (option GGG 40)
Gate: 1.4301 (option 1.4571)
Seal: NBR, EPDM, FPM, MVQ, PTFE
Mounting parts: steel, EKB-coated or zinc coated
Stem / piston: 1.4021 (option: 1.4571) rising or non rising
OperationHandwheel
Square
Gear box
Pneumatic cylinder
Hydraulic cylinder
Electric actuator
Special executionsValve with regulation port
Full bore
Square valve
AccessoriesMechanical limit switches
Proximity switches
Solenoid valves
Positioners
Stem extensions and pillars
DOMINO knife gate valve with stem extension and pillar
Non-rising extension
Knife gate valve without gland packing
The knife gate valve „system DOMINO“ is preferably used in the field of water
treatment and process engineering. The valve is the right solution for media
containing mud and fibers.
The knife gate valve seals pressure tight in both flow directions.
The user can choose among a variety of executions and actuators.
The design of the „DOMINO”-knife gate valvesfulfils the users’ highest requirements:
The maintenance-free COMPACT cross
seal (double seal lip profile) guarantees
tight shutoff and can be adjusted without interrupting
the working process.
The self-cleaning effect is achieved by
flush-out corners in the body and the
cutting edge underneath the gate.
Solids and fibres are cut by the cutting edgebefore tightening is done against the elastic seat.
The guidance of the gate is interrupted on stroke length,
thus dirt can be ejected.
Bidirectional shutoff is achieved by the lateral
gate surfaces and the elastic seat which is integrated
in the body.
The seat is chambered and prestressed mounted.
The high finish of the guide- and sealing
surface at both sides guarantees
long service and tight shutoff.
The lateral guidance of the gate prevents the gate from
fluttering in either of the flow directions or in throttle
positions.
EN ISO 9001
Subject to changes
DOMINO AT 100Wafer type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200: PN 10
DOMINO AT 200Lug type
Flange drilling acc. to DIN 2501
DN 50 – DN 150: PN 10 / 16
DN 200 – DN 1200: PN 10
The valve can be used as dead end valve.
DOMINO AT 200 RControl knife gate valve
DN 50 – DN 600
ExecutionsBody: Cast iron GG-25, EKB-coated (option GGG 40)
Gate: 1.4301 (option 1.4571)
Seal: NBR, EPDM, FPM, MVQ, PTFE
Mounting parts: steel, EKB-coated or zinc coated
Stem / piston: 1.4021 (option: 1.4571) rising or non rising
OperationHandwheel
Square
Gear box
Pneumatic cylinder
Hydraulic cylinder
Electric actuator
Special executionsValve with regulation port
Full bore
Square valve
AccessoriesMechanical limit switches
Proximity switches
Solenoid valves
Positioners
Stem extensions and pillars
DOMINO knife gate valve with stem extension and pillar
Non-rising extension
Knife gate valve without gland packing
The knife gate valve „system DOMINO“ is preferably used in the field of water
treatment and process engineering. The valve is the right solution for media
containing mud and fibers.
The knife gate valve seals pressure tight in both flow directions.
The user can choose among a variety of executions and actuators.
The design of the „DOMINO”-knife gate valvesfulfils the users’ highest requirements:
The maintenance-free COMPACT cross
seal (double seal lip profile) guarantees
tight shutoff and can be adjusted without interrupting
the working process.
The self-cleaning effect is achieved by
flush-out corners in the body and the
cutting edge underneath the gate.
Solids and fibres are cut by the cutting edgebefore tightening is done against the elastic seat.
The guidance of the gate is interrupted on stroke length,
thus dirt can be ejected.
Bidirectional shutoff is achieved by the lateral
gate surfaces and the elastic seat which is integrated
in the body.
The seat is chambered and prestressed mounted.
The high finish of the guide- and sealing
surface at both sides guarantees
long service and tight shutoff.
The lateral guidance of the gate prevents the gate from
fluttering in either of the flow directions or in throttle
positions.
Travessa de Peralta 5ª - Pol. Ind. l146540 El Puig (Valencia) - España
Tel.: +34 961 473 161Fax: +34 961 473 170E-Mail: [email protected] Internet: www.schubert-salzer.es
Delegaciones en:Portugal · Asturias · Canarias Coruña · Madrid · Sevilla
����������� ������������ �����
�
������������ ����������������� ������������ ����� ����� ��������� �������
