The code Breakers Detailed Design

PresentationThe Bicycle Powered Irrigation Device

Team Members:Ali Ashraf Ahmed SamirMushfiq

Introduction

Product modification

Subsystem

Conclusion

Outline

Revised client statement◦ The client required a bicycle powered irrigation device

which is easy to use, durable, cheap, safe as well as easy to maintain. It should also be able to lift the water 2 meter high at a rate of minimum 2 gallons per minute and the bike should also easily return to its normal use.

A preliminary report was submitted with 3 design evaluated and the best one chosen.

This design was studied in more detail and is explained in this presentation

Introduction

Product modification

Product Modification

Water lifting

Transition

Water collection

Bike support

Motor support

Subsystems

Bike support

Component Quantity MaterialRods 8 Metal

Rods 2 Steel

Table 1: Bill of materials for the transition subsystem:

0.33m

Transition system

Transition subsystem

0.23m

0.138m0.30m

0.18m

40°

Secondary Wheel

Steel rod

Component Quantity Material

Wheel 1 Rubber

Rods 8 Metal

Cylindrical rods 1 Steel

Table 2: Bill of materials for the transition subsystem:

Water lifting subsystem

Axial of the impeller

Water inlet

Shaft connecting impeller to power source

Discharge pipe

Component Quantity Material

Centrifugal pump 1 Metal

Water inlet hose 1 Rubber

Water outlet hose 1 Rubber

Table 3: Bill of materials for the lifting subsystem:

0.5m

Transition system

Water collection subsystem

Component Quantity Material

Container 1 Plastic

Square rods 4 Wood

Base sheet 1 Wood

Table 4: Bill of materials for the collection subsystem:

Water collection subsystem

Container Square rodBase sheet

Motor support subsystem

Component Quantity Material

Rectangular Block 1 Wood

0.40m

0.25m

Shaft

0.138m

Table 5: Bill of materials for the motor support subsystem:

Any Questions

Conclusion