The baying system PS 4000 - Rittal
Transcript of The baying system PS 4000 - Rittal
The baying system PS 4000
02
The baying system PS 4000
The baying system PS 4000
Design and technology customised to meet your needsTop quality and economy characterise the PS system.
The profile is one of the core features of our successful concepts. It offers top quality combined with a maximum useful internal space, unlimited
assembly due to 24 rows of holes in a 25 mm grid, no need for manual machining due to approx. 1000 square and 1000 round holes
(for medium sized enclosures) as well as 144 tapped holes at corners where assembly work is mostly required.
Internationally acknowledged approvals, product certifications according to worldwide standards and comprehensive tests at our own test
laboratories guarantee for top product quality - for you to be on the safe side.
The surface is well protected by nano-ceramic coating, dipcoat
primed.
Eight plug-in corner connectors and additional welding provide for
strong connections.
18 tapped holes in each corner provide for direct attachment of the
mounting plate, of swing frame, cable clamp rails or baying brackets.
Section through the vertical profile (above image) and the door with the
tubular door frame. Stability and high protection category are provided by
the profile and the labyrinth system.
Maximum sizes of orifices and two rows of holes in all twelve profiles
provide for free access from all sides for universal installation.
03
The baying system PS 4000
The baying system PS 4000
Quick assembly - just locate and fix it
Identical the roof and base frame
Diversityis offered by groove and assembly systems.
At any point within the room an attachment point can be implemented.
PS 4000Technology which has your solution.
The baying system PS 4000
04 The baying system PS 4000
Enclosure frame & bottom cover:Dipcoat primed. Door, roof and rear panel: dipcoat primed, powder coated in textured RAL 7035 on the outsideMounting plate & Gland plate:Galvanized sheet steel.
Article No. PS Size in mmW x H x D
Sheet steelEnclosure frame: 9-fold profileDoor: 2.0 mmRear panel: 1.5 mmMounting plate: 3.0 mmGland plate: 1.5 mm.
Material: Surface finish:
Supply includes:
Enclosure frame with door, removable rear panel and roof plate, 4 eyebolts fitted, mounting plate, gland plates, depth stay as shipping brace (r/h door hinge,can be changed to opposite side - single door Lockable door on right - double door).
Protection Category:IP 55 to EN 60 529Complies with NEMA 12.
4684.500
4685.500
4604.5004605.500
4606.500
4608.5004626.500
4884.5004885.500
4886.5004888.500
4804.5004805.500
4806.500
4808.5004826.5004084.500
600x1800x400600x1800x500600x2000x400600x2000x500600x2000x600600x2000x800600x2200x600800x1800x400800x1800x500800X1800X600800x1800x800800x2000x400800x2000x500800x2000x600800x2000x800800x2200x6001000x1800x400
Single Door Configuration details:
500 : Enclosure frame, front door, rear bolted cover, roof plate with eyebolts, bottom cover with standard gland plate and one mounting plate.
501 : Enclosure frame, front door, rear door, roof plate with eyebolts, bottom cover with standard gland plate and one mounting plate.
510 : Enclosure frame, front door, rear bolted cover, roof plate with eyebolts, bottom cover with standard gland plate.
511 : Enclosure frame, front door, rear door, roof plate with eyebolts, bottom cover with standard gland plate.
521 : Enclosure frame, front door, rear door, roof plate with eyebolts, bottom cover with standard gland plate and two mounting plates.
Example:-
4 8 0 8 5 0 0
PS 4000 Series Width Height RAL 7035 No. ofMounting plates
Rearpanel/door
Depth
PS Selection
Width6 – 600 W8 – 800 W0 – 1000 W2 – 1200 W
Rear0 – Rear panel1 – Rear door
Mounting plate0 –1 mounting plate1 – without mounting plate2 – 2 mounting plates
Height8 – 1800 H0 – 2000 H2 – 2200 H
Depth4 – 400 D5 – 500 D6 – 600 D8 – 800 D
Double Door
Article No. PS Size in mmW x H x D
4005.500
4006.500
4008.5004284.500
4285.500
4204.5004205.500
4208.5004226.500
1000x2000x500
1000x2000x600
1000x2000x8001200x1800x4001200x1800x500
1200x2000x4001200x2000x500
1200x2000x8001200x2200x600
4286.500 1200x1800x600
4206.500 1200x2000x600
Note: Enclosure with IP 65 & Seismic panels - available on request
Special size available on request
Accessories
The baying system PS 4000
05The baying system PS 4000
For increased floor clearance or for cable entry available with a height of either 100 or 200 mm.
Supply includes: 4 corner pieces, 4 cover caps and removable width & depth trim pre-configured assembly parts
Material: Sheet steel
Surface finish: Color - RAL 7022 texture spray finishedCover caps- plastic (color RAL 9005)
Base / Plinth PS
Angular baying bracket for PS : For baying two enclosures or as an additional reinforcement to baying kit. PS 4580.000 or 4581.000
Note: Not suitable for use with a fitted divider panel
Material: Sheet steel zinc plated, passivated
Supply includes: Assembly parts
Trim panels at the front and rear with fitted corner pieces and side trim panels without cover caps
Quick- fit baying clamp for PS :For quick in situ assembly, also suitable for temporary use in the workshop.
Note: Not suitable for the transportation of bayed enclosure suites
Material:Sheet steel zinc plated, passivated
Supply includes: Assembly parts
2804.2002807.2002813.2002846.2002823.2002829.2002833.2002848.2002909.2002914.2002916.2002836.2002839.2002844.2002853.200
2805.2002808.200
2824.2002830.200
2910.200
2837.2002840.200
Model No. SO
9788.0628001000
Baying kit for PS : The stable, secure standard connection, including fixing material.
Material: Hexagon steel section, Zinc plated, passivated
Supply includes: Assembly parts
Model No. PS4580.000
Packs of
6
Model No. PS4582.000
Packs of4
Model No. PS4581.000
Packs of
6
For cable entry grommetsconnector grommets instead of segments of the standard divided gland plates.
Material:Steel section, Zinc plated, passivated
Supply includes:
Assembly parts
06 The baying system PS 4000
Accessories
The baying system PS 4000
Baying in situations where the rear panels and doors are not intended to be removed forbaying or where divider panels and inner walls are already fitted.
In conjunction with the cable entry plate, simple and fast sealing of cables inserted in thebase area of enclosures.
Body : Polypropylene Cover : Thermoplastic elastomer
Protection category
IP55 subject to correct mounting
Cable entry grommets
Material
Combination angle
Baying bracket for PS :
Cable entry plates
Model No. PS
4316.0004317.0004318.000
For optimum distribution of tensile forces during transportation of bayed enclosures by crane.
Model No. PS4320.700
4325.700
4321.7004323.700
Supply includes:Assembly parts.
Surface finish:Zinc plated
Material:Sheet steel
Material:Sheet steel zinc plated, passivated
Supply includes: Assembly parts
Model No. PS4584.000
Packs of6 pairs
Packs of Model No. TS4 4540.000
Model No. PS
Model No. PSSuitable for cable diameters from 8 to 36 mm
Material:Outer cover: Polypropylene covered withthermoplastic elastomerSeal: Cellular rubber
Protection category:IP 55 subject to correct mounting.
Accessories
The baying system PS 4000
07The baying system PS 4000
For strain relief with cable entry. Depth - variable mounting on a 25 mm pitchPattern on the horizontal enclosure section or inside base/ plinth trim panels with assembly bolts.
Material:Steel
Surface finish:Zinc plated
Supply includes:Assembly parts
Mounting angle for TS, PS, PC, TP Universal Console, Base / Plinths 385
5857859851185
For heavy installed equipment such as transformers. T-head screw and slot in the support rail to accommodate all mounting dimensions.
Material:
Sheet Steel
Surface finish: Zinc Plated
Supply includes:
- 2 system support rails( 45 x 25mm)- 4 T - head screws M12 x 60 mm- Assembly parts
Note: fixing in the enclosure width only
Cable clampsfor cable clamp railsFor fastening the cables to the cable clamp rails.
Material:Sheet steel
Surface finish:Zinc-plated
Supply includes:Plastic insert
For cable diameter
mmPacks of Model No. SZ
6 – 12 2350.00012 – 16 2351.00014 – 18 2352.00018 – 22 2353.00022 – 26 2354.00026 – 30 2355.00030 – 34 2356.00034 – 38 2357.00038 – 42 2358.00042 – 46 2359.00046 – 50 2360.000
4311.000
Model No. PS
4193.0004191.0004192.0004336.0004196.000
2525252525252525252525
4361.0004362.0004347.0004363.000
08 The baying system PS 4000
Accessories
The baying system PS 4000
Material : Sheet steel
Surface Finish: Zinc plated
Supply includes: Assembly screws
For direct screw-fixing to the tubular door frame
For door width (mm) Model No. PS4005006008009001000
4594.0004309.0004596.0004598.0004579.0004599.000
Packs of
20
20
20
20
20
20
Door rail for PS
For TS, CM, PS PC, TP pedestalFor fastening to tubular door frames at any height
Colour : RAL 7035
Supply includes: Assembly screws
For door width (mm)
D = 90mm
Side panels for PS, screw fastenedTo finish off a complete enclosure unit. Simply locate and secure with 6 screw fasteners
Material : Sheet steel 1.5 mm
Surface Finish: Dipcoat-primed, powder- coated on the outside with RAL 7035 textured
Supply includes: Assembly parts
4184.2354185.2354186.2354188.2354104.2354105.235
180018001800180020002000
400500600800400500
Height (mm) Depth (mm) Packs of
222222
4106.2354108.2354124.2354125.2354126.2354128.235
200020002200220022002200
600800400500600800
222222
Wiring plan pockets plasticMaterial:
Polystyrene with self-adhesive fastening strips.
For affixing to the inside surfaces of doors.
A3 landscape
A4 Portrait2513.0002514.0002515.000
Article No. SZ For Format
Model No. PS
Model No. PS
4114.0004115.0004116.0004118.0004123.0004124.000
A5 landscape
Accessories
The baying system PS 4000
09The baying system PS 4000
Mounting Plate infillFor a continuous mounting surface in bayed suites where the mounting plate is set forward.
Material : Sheet steel, zinc plated, passivated.
Supply includes : Assembly parts
180020002200
4590.7004591.7004592.700
Article No. TS/PS For Encl Height
Lock and push-button inserts
For installation in
Comfort handle for semi-cylinders Ergo form - S standard Folding lever handle for CM
Lock inserts Version A, length 27 mm Model No. PS7 mm square8 mm square7 mm triangular8 mm triangularScrewdriverDaimler insert3 mm double-bit Fiat6.5 mm triangular (CNOMO)
2460.0002461.0002462.0002463.0002464.0002465.0002466.0002307.0002460.650
Ergoform-S lock systemThe unlocked handle folds down forwards and the lock is opened by swiveling. Prepared for the installation of all 27 mm lock inserts, version A as well as SZ lock and push-button inserts.
Material : Die-cast zinc
Surface Finish: Powder-coated
RAL 7032 with brown handle RAL 7035 with brown handle Brown Matt nickel-plated
RAL 7032 RAL 7035
Design
1)RAL 7035 with brown handle and bracket
2450.000 2450.010 2451.000 2452.000 2454.000 2435.000 2455.000 2455.010
Hole diameter = 7 mm for padlock or multiple latch
Model No. SZ
Model No. SZ2467.0002468.0002469.000
10 The baying system PS 4000
Accessories
The baying system PS 4000
Installation options :
Directly via angle brackets PS 4181.000, mounting brackets PS 4182.000 or support brackets PS 4183.000 in conjunction with U nuts
On the horizontal enclosure section
− Directly via support brackets TS − Via adaptor rail for PS compatibility in conjunction with angle brackets, mounting brackets or support brackets PS
On the vertical enclosure section
Material : Sheet steel
Surface Finish: Zinc plated
PS punched rails 23 x 23 mm
Also required:
− U nuts − Mounting brackets TS/PS or− Angle brackets, support brackets TS/PS
295 400 12
895 1000 12
4169.000
395 500 12 4170.000495 600 12 4171.000
695 800 12 4172.0004173.000
For WHD mm
Packs of
Model No.PSLength mm
1095 4174.0006120012951495169518952095 2200 6 4178.000
4177.0004176.0004175.0004393.0006
666
1400160018002000
Rail systems
Horizontal support strips Installation options:
− On the PS system punching, in the enclosure depth− On the tubular door frame PS, TS− On the outer mounting level TS
Material : Sheet steel
Surface Finish: Zinc plated
Supply includes: Assembly screws
For Enclosure Width/Depth mm Length mm Packs of Model No.PS
400500600800
340440540740
20202020
4694.0004695.0004696.0004697.000
Hinges 180°
For retrospective conversion of standard doorswith 130° hinges.Including assembly parts.For PS, universal console TP, TP pedestal
Material : Aluminium
Surface finish : Powder-coated in RAL 8019
Packs of Model No.PS6 4189.000
PS punched section without mounting flange, 23 x 73 mmwith 5 rows of holes for universal skeleton structures or partial assembly.
Installation options:
On the horizontal enclosure sectionDirectly via support brackets PS 4183.000
On the vertical enclosure section
− Directly via support brackets TS − Via adaptor rail for PS compatibility in conjunction with support brackets PS
Material : Sheet steel
Surface Finish: Zinc plated
For WHD mm Packs of Model No.PS
295395495695
400500600800
4
8951095
10001200
169518952095
180020002200
4374.0004375.0004376.0004377.0004382.0004378.000
4379.0004380.0004381.000
Length mm
44444444
Also required: Support brackets PS/TS
Accessories
The baying system PS 4000
11The baying system PS 4000
PS punched section with mounting flange 23 x 73 mm
Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply locate into the system punchings and secure.
Installation options:
− Via adaptor rail for PS compatibility
On the horizontal TS enclosure sectionOn the PS system punchings, in the enclosure depth*
On the vertical enclosure section
Material : Sheet steel
Surface Finish: Zinc plated
Supply includes: Assembly screws
Packs of Model No.PS
400500600800
4 4369.0004370.0004371.0004372.000
444
* Installation in enclosure depth PS,TP universal console, mm
Packs of Model No.PS**Installation in enclosure
width / depth TS mm
6008001000
4364.0004365.0004373.000
444
1200 4367.0004
** installation in enclosure width for PS
12 The baying system PS 4000
Accessories
The baying system PS 4000
Material :Die-cast zinc
Supply includes (1 set) :
1 mounting bracket 1 screw M6 x 12 mm
Also required : − U nuts for punched rails (recommended: M6)− Multi-tooth screws M6 x 12 mm, 2504.500
For variable attachment of punched rail 23 x 23 mm.
Installation options:
Optionally flush with :− Outer enclosure edge or− Enclosure clearance width
On the vertical TS enclosure section via− Adaptor rail for PS compatibility,
On the horizontal TS enclosure sectionOn enclosures and rails with rectangular system punching 12.5 x 10.5 mm
Mounting bracket PS Packs of Model No.PS24 set 4182.000
1 cage nut M6
Angle bracket PSFor quick attachment of punched rails 23 x 23 mm.
Installation options:
On the vertical TS enclosure section via
− Adaptor rail for PS compatibility
On the horizontal TS enclosure section
On enclosures and rails with rectangular
system punching 12.5 x 10.5 mm.
1 angle bracket, left
1 angle bracket, right
2 metal screws 5.5 x 13 mm
Material : Sheet steel
Surface Finish: Zinc plated
Supply includes (1 set) :
Also required : − U nuts for punched rails− Multi-tooth screws M6 x 12 mm, 2504.500
Packs of Model No.PS12 set 4181.000
Support bracket PSFor the attachment of punched sections without mounting flange 23 x 73 mm or punched rails 23 x 23 mm.
Material :Die-cast zinc
Supply includes (1 set) :1 support bracket
2 countersunk screws
2 serrated lock washers
Packs of Model No.PS24 set 4183.000
Also required :
− U nuts for punched rails (recommended: M6)
− Multi-tooth screws M6 x 12 mm
− Adaptor rail for PS compatibility (when mounting on the vertical enclosure section)
Installation options:
On the vertical TS enclosure section via
− Snap-on nut TS 8800.806,
− Adaptor rail for PS compatibility
On the horizontal TS enclosure section
On enclosures and rails with rectangular system punching 12.5 x 10.5 mm
Accessories
The baying system PS 4000
13The baying system PS 4000
Material :Die-cast zinc
Supply includes (1 set) :
1 bracket/spacer
2 screws M8 x 16 mm
2 spring lock washers
2 cage nuts M8
2 serrated lock washers
For fastening C rails, punched rails or cable clamp rails
(angle section). On the sides, to accommodate square sections
or tubes (Ø 20 mm). Attachment points with M8 thread.
Installation options :
On the vertical TS enclosure section via
− Snap-on nut TS 8800.808, or
− Adaptor rail for PS compatibility
On the horizontal TS enclosure section
On enclosures and rails with rectangular
system punching 12.5 x 10.5 mm
Packs of Model No.PS6 set 4199.000
Bracket/spacer
2 Metal screws
14 The baying system PS 4000
Accessories
The baying system PS 4000
Installation options : On enclosures and rails with rectangular system
punching 12.5 x 10.5 mm, such as:
TS enclosure section− vertically, via adaptor rail for PS compatibility
− horizontally, direct
PS enclosure body, all-round
Punched rail 23 x 23 mm
Punched section without mounting flange, 23 x 73 mm
Punched section without mounting flange, 45 x 88 mm
Punched section with mounting flange, 23 x 73 mm
Captive nutsThe compression spring, designed as an insertion aid, ensures reliable mechanical and electrical connection in the system punchings.
Packs of Model No.TS50 4166.000
4164.0004165.000
5050
M5M6M8
ThreadCaptive nuts/threaded blocks
Threaded blockWith snap-off insertion aid, die-cast zinc
Packs of Model No.TS50 4162.000
4163.00050M6M8
Thread
U nuts
For
Punched rail 23 x 23 mm
Punched section without mounting flange, 23 x 73 mm
Punched section without mounting flange, 45 x 88 mm
Punched section with mounting flange, 23 x 73 mm
For mounting punched rails and punched sections without
mounting flanges on angle brackets, mounting
brackets and support brackets, we recommend
U nuts with M6 thread (PS 4179.000)
Accessories:
Multi-tooth screws M6 x 12 mm,
(for PS 4179.000)
Packs of Model No.TS20 4119.000
4157.0004179.0004180.000
202020
M4M5M6M8
Thread
Door stay To secure door in open position.
Packs of Model No.5 4583.000
Accessories
The baying system PS 4000
15The baying system PS 4000
AssemblyBottom
Ride-Up roller
Lifts the door with heavy installed equipment (e.g. cooling unit) as a closing aid. For attaching to the tubular door frame.
Limit switch
Lifts the door with heavy installed equipment (e.g. cooling unit) as a closing aid. For attaching to the tubular door frame.
Article No. Description
4127.010Door-operatedSwitch withSupport plate
Packs of Model No. TS10 4538.000
Enclosures Power Distribution
Climate Control
IT Infrastructure
Software & Services
RITTAL India Pvt. Ltd.No. 23 & 24 • KIADB Industrial Area • Veerapura Doddaballapur - 561 203 • Bengaluru DistrictTel: +91(0)80 3372 0700 • Fax: +91(0)80 3372 0866 Email: [email protected] • Website: www.rittal-india.com