East Asia Mongolia, China, North Korea, South Korea, Japan, Taiwan (6)
The 6th China-Japan-Korea Joint Symposium on …The 6th China-Japan-Korea Joint Symposium on...
Transcript of The 6th China-Japan-Korea Joint Symposium on …The 6th China-Japan-Korea Joint Symposium on...
The 6th China-Japan-Korea Joint Symposiumon Optimization of Structural and Mechanical Systems
June 22-25, 2010Kyoto, Japan
On behalf of the organizing committee of the 6th CJK-OSM, we would like to announce the Call for Papers.
CJK-OSM (China-Japan-Korea Joint Symposium on Optimiza-tion of Structural and Mechanical Systems) is a series of bien-nial symposia which have stimulated and promoted researches and interests in all aspects of optimization of structures and me-chanical systems. Following the previous CJK-OSMs (the 1st Symposium took place in Xian, China in 1999, the 2nd one in Busan, Korea in 2002, the 3rd in Kanazawa, Japan in 2004, the 4th in Kunming, China in 2006, and the 5th in Jeju, Korea in 2008), CJK-OSM6 will be held at the Kyoto Garden Palace Hotel in Kyoto, Japan, June 22-25, 2010.
From the 5th Symposium the CJK-OSM has been recognized as an official conference sponsored by ISSMO (International Soci-ety of Structural and Multidisciplinary Optimization). Although the title of CJK is not yet changed, we are most happy to wel-come people not only from three initiating countries but also from any other areas of the world.
The Symposium will be held at the Kyoto Garden Palace Hotel in Kyoto. The conference site is located in the city, near Kyoto Gyoen National Park (Kyoto Imperial Palace) and many famous historic spots. It is easily accessible through public transporta-tion (metro or bus lines) from the Kyoto Station. Participants will have the possibility to reserve their accommodations at the conference site at the special rate.
Welcome Message
Venue
Japan Society of Mechanical Engineers
International Society for Structural and Multidisciplinary Optimization
Sponsored by
The 6th China-Japan-Korea Joint Symposiumon Optimization of Structural and Mechanical Systems
Important Dates
December 15, 2009: Abstract submission deadline
February 15, 2010:Notification of acceptance
April 15, 2010:Full paper ( 2-10 pages )submission deadline
Instruction for AuthorsAuthors wishing to contribute to the conference are invited to submit online a
short abstract (maximum of 500 words), before December 15, 2009.
Abstracts from China and Korea will be collected and reviewed first by the scientific committee members from
China and Korea, respectively. Other abstracts should be submitted to the conference secretariat, and will be reviewed first by the scientific committee members from Japan.
The short abstracts will be published in a bound
volume. This volume and the CD-ROM with the full papers will be distributed to the participants at the site of the
Symposium. The format guidelines for abstracts will be available at the Symposium website.
Symposium TopicsStructural Optimization
Multidisciplinary Design Optimization
Basic Optimization Techniques
Multi-Scale Optimization
Optimization in Bio-Mechanics
Optimization Methods in Advanced Materials and Nano-Mechanics
Meta-Heuristics for Structural Optimization
Approximation Methods for Hard Optimization
Multi-Objective Optimization
Robust and Reliability-Based Optimization
Industrial Application and Software Development
Other Topics Related to Engineering Optimization
To be announced in September, 2009Registration Fee
Dong-Hoon Choi, Hanyang University, KoreaO Kaung Lim, Pusan National University, KoreaKwon-Hee Lee, Dona-A University, KoreaJung Kook Paeng, Hyundai Motors, KoreaSeungjae Min, Hanyang University, KoreaByung-Lyul Choi, Framax, KoreaMinjoong Jeong, KISTI, KoreaMichael Yu Wang, Chinese University of Hong Kong, ChinaXu Guo, Dalian University of Technology, ChinaWeihong Zhang, Northwestern Polytechnical Univ., ChinaShutian Liu, Dalian University of Technology, China
Hiroshi Yamakawa , Waseda University, JapanYoon Young Kim, Seoul National University, KoreaJae-Woo Lee, Konkuk University, KoreaJongsoo Lee, Yonsei University, KoreaTae Hee Lee, Hanyang University, KoreaYeon-Sun Ryu, Pukyong National University, KoreaDooho Lee, Dong-Eui University, KoreaYunkang Sui, Beijing University of Technology, ChinaHai Huang, Beihang University, ChinaBaoyan Duan, Xidian University, China
Kikuo Fujita , Osaka University, Japan Gyung-Jin Park , Hanyang University, KoreaZhiping Qiu , Beihang University, ChinaJooho Choi, Korea Aerospace University, KoreaSemyng Wang, Gwangju Inst. Science and Tech., KoreaJeonghoon Yoo, Yonsei University, KoreaSung-Kie Youn, KAIST, KoreaSeonho Cho, Seoul National University, KoreaJeong Sam Han, Andong National University, KoreaGil Ho Yoon, Kyungpook National University, KoreaXicheng Wang, Dalian University of Technology, ChinaKang Zhan, Dalian University of Technology, ChinaChunman Chan, Hong Kong Univ. Science and Tech., China
Keizo Ishii, Quint Corporation , JapanHitoshi Inomo, Kagawa University, JapanYoshihiro Kanno, University of Tokyo, JapanSatoshi Kitayama, Kanazawa University, JapanMasakazu Kobayashi, Toyota Technological Institute, JapanSeiichiro Sakata, Shimane University, JapanJiro Sakamoto, Kanazawa University, JapanMasatoshi Shimoda, Shonan Institute of Technology, Japan
Xu Han, Hunan University, ChinaLiping Chen, Huazhong Univ. of Science and Tech., ChinaKemin Zhou, Huaqiao University, ChinaHideyuki Azegami, Nagoya University, JapanMasao Arakawa, Kagawa University, JapanNozomu Kogiso, Osaka Prefecture University, JapanKatsuyuki Suzuki, University of Tokyo, JapanYukio Tada, Kobe University, JapanHiroshi Furuya, Tokyo Institute of Technology, JapanManabu Matsushima, Kagawa University, Japan
Gang Li, Dalian University of Technology, ChinaHaitao Ma, South China University of Technology, ChinaJianhua Rong, Changsha Univ. Science and Tech., ChinaHiroyuki Sugimoto, Hokkai Gakuen University, JapanMasao Tanaka, Osaka University, JapanHirotaka Nakayama, Konan University, JapanHitoshi Furuta, Kansai University, JapanMasataka Yoshimura, Prof. Emeritus, Kyoto Univ., Japan
Dagang Lu, Harbin Institute of Technology, ChinaDeqing Yang, Shanghai Jiaotong University, ChinaZichen Deng, Northwestern Polytechnical University, ChinaJianbin Du, Tsinghua University, ChinaHiroshi Ohmori, Nagoya University, JapanShigeru Obayashi, Tohoku University, JapanSatoshi Katsuki, National Defense Academy, JapanNaoki Katoh, Kyoto University, JapanEisuke Kita, Nagoya University, JapanAkira Todoroki, Tokyo Institute of Technology, JapanHideaki Nakamura, Yamaguchi University, JapanRyohei Yokoyama, Osaka Prefecture University, Japan
Wataru Shiraki, Kagawa University, JapanToyofumi Takada, University of Shiga Prefecture, JapanAkihiro Takezawa, Hiroshima University, JapanJingyao Zhang, Ritsumeikan University, JapanTomoyuki Hiroyasu, Doshisha University, JapanSatoshi Furui, Cybernet Systems, JapanToshio Honma, Kagoshima University, JapanSatoshi Yonezawa, Engineous Japan, Japan
(Chairman)
(Co-Chairman)(Co-Chairman)
ContactConference secretariat
Tel: +81-75-753-5198, FAX +81-75-753-5857Email [email protected]
Website http://www.jsme.or.jp/conference/dsdconf10/cjkosm6.html
Honorary ChairmanGeneral ChairmanCo-Chairman
Chairman of Local Organizing CommitteeSecretariatOrganizing committee
Advisory Board
Scientific Committee(Chairman)
Koetsu Yamazaki, Kanazawa University, Japan
Makoto Ohsaki, Kyoto University, Japan
Gengdong Cheng, Dalian University of Technology, ChinaByung Man Kwak, KAIST, Korea
Shinji Nishiwaki, Kyoto University, Japan
Kazuhiro Izui, Kyoto University, Japan
Local Organizing Committee