Fa c u lt y o F c i v i l E n g i n E E r i n g , v i l n i u s g E d i m i n a s t E c h n i c a l u n i v E r s i t y

t h E a s s o c i at i o n o F E u r o P E a n c i v i l E n g i n E E r i n g Fa c u lt i E s

t h E a s s o c i at i o n o F E u r o P E a n o P E r at i o n a l r E s E a r c h s o c i E t i E s ( E W g - o r s d c E )

l i t h u a n i a n g r o u P o F i n t E r n at i o n a l a s s o c i at i o n F o r B r i d g E a n d s t r u c t u r a l E n g i n E E r i n g

E u r o P E a n c o u n c i l o F c i v i l E n g i n E E r s

t h E l i t h u a n i a n a c a d E m y o F s c i E n c E s

Conference Programme

The 12th International Conference

Modern Building Materials, Structures and Techniques

May 26–27, 2016, Lithuania

212

th In

tern

atio

nal C

onfe

renc

e M

oder

n Bu

ildin

g M

ater

ials

, Str

uctu

res

and

Tech

niqu

es

The Conference is organized by Faculty of Civil Engineering, Vilnius Gediminas technical university and partners:

International Association for Bridge and Structural Engineering (Lithuanian group),

European Council of Civil Engineers,

The Association of European Civil Engineering Faculties,

The Association of European Operational Research Societies (EWG-ORSDCE),

The Lithuanian Academy of Sciences

OverviewThe 12th international conference “Modern Building Materials, Structures and Techniques” is organized in Vilnius, Lithu-ania, on 26–27 of May, 2016. The conference provides an opportunity for scientists, engineers, managers and profes-sionals from around the world to share the latest achievements and to highlight the problems. Such a conference is an excellent opportunity to meet colleagues, to exchange knowledge and experience, and to extend your list of contacts.

Starting form year 1991, faculty of Civil Engineering at Vilnius Gediminas Technical University (VGTU) together with na-tional and international partners already has organized eleven highly successful international scientific conferences to discuss up-to-date problems in civil engineering. This conference is aimed at discussing of both industrial and academic research which has been recently carried out on analysis and design of modern structures, development of innovative building materials, maintenance of structures, building technology and management, etc.

3

12th

Inte

rnat

iona

l Con

fere

nce

Mod

ern

Build

ing

Mat

eria

ls, S

truc

ture

s an

d Te

chni

ques

Conference topics

• Building materials and production technology• Innovative analysis and design methods for bridges and building structures• Behavior and design of concrete, masonry, glass, steel, timber and composite

structures• Stability of steel and composite structures• Repair, renovation and strengthening of bridges and building structures• Geotechnics• Optimization in structural engineering• Architectural engineering• Construction technology and organization• Decision making, decision support systems and management in construction• Operational research• Building information system• Fire safety, human safety and ergonomics

412

th In

tern

atio

nal C

onfe

renc

e M

oder

n Bu

ildin

g M

ater

ials

, Str

uctu

res

and

Tech

niqu

es

Honorary committee:H. A. Mang (Austria)A. Daniūnas (Lithuania)P. Vainiūnas (Lithuania)E. K. Zavadskas (Lithuania)

Organizing committee:

Chairman: L. Juknevičius (Lithuania)

Members:R. ZavalisL. KanapeckienėI. Misiūnaitė

General SponsorSOFiSTiK AG

CSD inžinieriai, UAB

5

12th

Inte

rnat

iona

l Con

fere

nce

Mod

ern

Build

ing

Mat

eria

ls, S

truc

ture

s an

d Te

chni

ques

Scientific committee:

Chairman: A. Juozapaitis (Lithuania)

Members:H. Adeli (USA)P. Alawdin (Poland)J. Atkočiūnas (Lithuania)R. Bairrao (Portugal)G. L. Balazs (Hungary)R. C. Barros (Portugal)R. Belevičius (Lithuania)H. Brandl (Austria)D. Camotim (Portugal)J. Eberhardsteiner (Austria)J. Galaj (Poland)T. V. Galambos (USA)K. Ghavami (Brasil)R. Gilbert (Australia)M. Gižejowski (Poland)L. G. Hagsten (Denmark) K. Holshemacher (Germany)G. I. Jakovlev (Russia)S. Idnurm (Estonia)

J. P. Jaspart (Belgium)R. Kačianauskas (Lithuania)G. Kaklauskas (Lithuania)A. Kaklauskas (Lithuania)Z. Kala (Czech Republic)O. Kaplinski (Poland)R. Katzenbach (Germany)R. Kliukas (Lithuania)A. Korjakins (Latvia)A. K. Kvedaras (Lithuania)J. Lellep (Estonia)R. Liias (Estonia)T. Lodygowski (Poland)J. Machaček (Czech Republic)R. Mačiulaitis (Lithuania)A. Mandolini (Italy)G. Marčiukaitis (Lithuania)L. Mica (Czech Republic)

A. Norkus (Lithuania)B. Pacewska (Poland)A. Paeglitis (Latvia)J. Parasonis (Lithuania)H. Pasternak (Germany)K. Pilakoutas (UK)K. Rasmussen (Australia)T. F. Ronning (Norway)M. J. Skibniewski (USA)G. Skripkiūnas (Lithuania)A. Šapalas (Lithuania)R. Šukys (Lithuania)V. M. Ulitsky (Russia)L. Ustinovičius (Lithuania)J. Valivonis (Lithuania)F. Wald (Czech Republic)R. Ziemian (USA)M. Ziegler (Germany)

612

th In

tern

atio

nal C

onfe

renc

e M

oder

n Bu

ildin

g M

ater

ials

, Str

uctu

res

and

Tech

niqu

es

Overview of Conference scheduleDate Time \ Location Hall Stiklo Hall Granito Hall Gintaro Hall Marmuro

Thursday, 26th of May 2016

7:30–9:00 Registration in lobby

9:00–10:30 PLENARY session I – – –

10:30–11:00 Coffee break

11:00–12:30 PLENARY session II – – –

12:30–13:30 Lunch

13:30–15:00 STR session I – MTR session I TECH session I

15:00–15:30 Coffee break/ Poster session

15:30–17:00 STR session II – MTR session II TECH session II

17:00–19:00 Free time/ social program

19:00–22:00 Gala dinner

Friday, 27th of May 2016

8:30–9:00 Registration in lobby

9:00–10:30 – JOINT session MTR session III GEO session

10:30–11:00 Coffee break/ Poster session

11:00–12:30 – STR session III MTR session IV –

12:30–13:30 Lunch

13:30–15:00 – STR session IV STR session V –

15:00–15:30 Coffee break/ Poster session

15:30–20:00 Free time/ social program

MTR – Building Materials; STR – Structures; TECH – Building Technologies and Management; GEO – Geotechnics.

7

PLEN

ARy

Ses

sion

I

Plenary Session I 9:00–10:30Thursday, May 26, 2016

Chairman: A. Šapalas

A. DaniūnasWelcome adress by rector of VGTU

R. DargisWelcome adress by president of Lithuanian Confederation of Industrialists

R. D. Ziemian Keynote presentation: Design by advanced analysis – 2016 AISC specification

D. Camotim, B. young, P. B. Dinis, A. D. Martins Keynote presentation: Mode interaction in cold-formed steel members susceptible to distortional buckling

8PL

ENA

Ry S

essi

on II

Plenary Session II 11:00–12:30Thursday, May 26, 2016

Chairman: G. Kaklauskas

M. A. Bradford, A. Hassanieh, H. R. Valipour, S. J. Foster Keynote presentation: Sustainable steel-timber joints for framed structures

M. Ziegler Keynote presentation: Application of geogrid reinforced constructions: history, recent and future developments

R. I. Gilbert Keynote presentation: Cracking caused by early-age deformation of concrete – prediction and control

9

Build

ing

Mat

eria

ls, T

echn

olog

ies

and

Man

agem

ent –

Join

t Ses

sion

Joint Session

Chairman: R. D. Ziemian, D. Camotim

C. Zhu, K. J. R. Rasmussen, H. Zhang Keynote presentation: Moment-rotation behaviour of bolted moment end-plate connections.

H. Pasternak, B. Launert, T. Kannengießer, M. Rhode Keynote presentation: Advanced residual stress assessment of plate girders through welding simulation

Z. Li Keynote presentation: Applications of physics in new material technique development

9:00–10:30Friday, May 27, 2016

Build

ing

Mat

eria

ls –

Ses

sion

I10

Building Materials – Session I 13:30-15:00Thursday, May 26, 2016

Chairman: M. K. Kazberuk, G. Skripkiūnas

L. Dembovska, D. Bajare, I. Pundiene, L. Vitola Effect of pozzolanic additives on the strength development of high performance concrete

D. Gazdič, K. Kulíseka, M. Fridrichová, K. DvořákFired hydraulic binder based on fluidized combustion fly ash

Y. UsherenkoComposite materials for steel cutting and concrete crushing

Ł. Mejlun, J. Judycki, B. DołżyckiComparison of elastic and viscoelastic analysis of asphalt pavement at high temperature

D. Dolak, K. Dvořáka, J. Bureš, D. VšijanskýDependence of residual CO2 of limestones on apparent density

Build

ing

Mat

eria

ls –

Ses

sion

II

11

Building Materials – Session II 15:30-17:00Thursday, May 26, 2016

Chairman: J. Hroudova, A. Korjakins

Y. Tokarev, E. Ginchitsky, S. Sychugov,V. Krutikov, G. Yakovlev, A. Buryanov, S. SenkovModification of gypsum binders by using carbon nanotubes and mineral additives

G. I. Yakovlev, G. Skripkiunas, I. S. Polianski, O. Lahayne, J. Eberhardsteiner, I. A. Pudov, S. V. Sychugov, E. A. Karpova, S. A. Senkov Modification of cement matrix using carbon nanotube dispersions and nanosilica

J. J. Chen, P. L. Ng., L. G. Li, A.K.H. KwanProduction of high-performance concrete by addition of fly ash microsphere and condensed silica fume

M. Pszczoła , M. Jaczewski, C. Szydłowski, J. Judycki, B. DołżyckiEvaluation of low temperature properties of rubberized asphalt mixtures

Build

ing

Mat

eria

ls –

Ses

sion

III

12

Building Materials – Session III 9:00-10:30Friday, May 27, 2016

Chairman: G. Šachmenko, L. Sadowski

L. Gulbe, I. Vitina, J. SetinaThe influence of cement on properties of lime mortars

L. SadowskiSelected physical properties of concrete modified using mineral powders

G. Skripkiūnas, M. Macijauskas, D. Nagrockienė, A. DaugėlaThe influence of biomass fly ash on the plasticizing effects in cement pastes

G. Bumanis, D. BajareCompressive strength of cement mortar affected by sand microfiller obtained with collision milling in disintegrator

B. Dolzycki, M. Jaczewski, C. SzydłowskiThe influence of binding agents on stiffness of mineral-cement-emulsion mixtures

Build

ing

Mat

eria

ls –

Ses

sion

IV

13

Building Materials – Session IV 11:00-12:30Friday, May 27, 2016

Chairman: J. Parilkova, G. Bumanis

Y. G. Pauliukevich, O. Kizinievič, M. M. Hundzilovich, Y. A. KlimashMultilayer high-alumina ceramic materials for disperse systems microfiltration with active layer received in Al2O3-CuO, Al2O3-TiO2-MnO2 systems

J. Hroudova, M. Sedlmajer, J. Pařílková, J. ZachLaboratory testing of developed thermal insulation plasters on pillars built from masonry bricks

E. Namsone, G. Šahmenko, A. Korjakins, A. JocisDurability properties of high performance foamed concrete

A. Rutkauskas, D. Nagrockienė, G. Skripkiūnas, A. Kičaitė, G. GirskasIdentification of reactivity level in aggregates from Lithuanian gravel quarry

Build

ing

Mat

eria

ls –

Pos

ter S

essi

on14

Building Materials – Poster Session 15:00–15:30

W. KubissaEcological high performance concrete

O. Smirnova, T. PetrovaObtaining the high-performance concrete for railway sleepers in Russia

L. Urkhanova, S. Buiantuev, S.Lkhasaranov, V. Rozina, N. OchirovaFiber-reinforced concrete with mineral fibers and nanosilica

H. Escanderi, M. TayebiniEffect of 32.5 and 42.5 cement grades on ann prediction of ferrocement compressive strength

H. Escandari, M. G. Nik, M. M. EidiPrediction of mortar compressive strengths for different cement grades in the vicinity of of sodium chloride using ANN

S. Leontjev, K. Saraykina, V. Golubev, G. Yakovlev, N. Rakhimova, V. Shamanov, S. SenkovResearch of influence additives with ultra- and nanodisperse size on the structure and properties of lightweight autoclaved aerated concrete

J. Galaj, T. Drzymała, P. PiątekAnalysis of influence of tilt angle on the distribution of water droplets diameters in a spray generated by the Turbo Master 52 nozzle

K. ZielinskiImpact of recycled aggregates on selected physical and mechanical characteristics of cement concrete

Thursday, May 26, 2016

Build

ing

Mat

eria

ls –

Pos

ter S

essi

on

15

Building Materials – Poster Session 15:00–15:30

W. KubissaEcological high performance concrete

O. Smirnova, T. PetrovaObtaining the high-performance concrete for railway sleepers in Russia

L. Urkhanova, S. Buiantuev, S.Lkhasaranov, V. Rozina, N. OchirovaFiber-reinforced concrete with mineral fibers and nanosilica

H. Escanderi, M. TayebiniEffect of 32.5 and 42.5 cement grades on ann prediction of ferrocement compressive strength

H. Escandari, M. G. Nik, M. M. EidiPrediction of mortar compressive strengths for different cement grades in the vicinity of of sodium chloride using ANN

S. Leontjev, K. Saraykina, V. Golubev, G. Yakovlev, N. Rakhimova, V. Shamanov, S. SenkovResearch of influence additives with ultra- and nanodisperse size on the structure and properties of lightweight autoclaved aerated concrete

J. Galaj, T. Drzymała, P. PiątekAnalysis of influence of tilt angle on the distribution of water droplets diameters in a spray generated by the Turbo Master 52 nozzle

K. ZielinskiImpact of recycled aggregates on selected physical and mechanical characteristics of cement concrete

J. Žvironaitė, J. PranckevičienėThe investigation of alkali – silica reactivity (ASR) of Lithuanian aggregates

K. Zieliński, M. Babiak, M. Ratjczak, J. KosnoImpact of chemical and physical modification on thermoplastic characteristics of bitumen

B. Kukfisz, M. PółkaAnalysis of oxygen index to support candle-like combustion of polyurethane

P. Buczynski, M. IwanskiFatigue life comparison of recycled cold mixeswith foamed bitumen or bitumen emulsijon

G. Mazurek, M. IwanskiRelaxation modulus of SMA with polymer modified and highly polymer modified bitumen

M. Iwański, M. Cholewinska, G. MazurekViscoelastic properties of polymer modified bitumen in Warm Mix Asphalt technology in terms of ageing

S. Guzlēna, G. Šakale, S. ČertoksClayey material analysis for assessment to be used in ceramic building materials

V. Vaganov, M. Popov, A. Korjakins, G. ŠahmenkoLocalization of alkali-silica reactions in lightweight concrete with granulated foam glass using cnt

V. Shevchenko, G. KotsayEffect of water glass on early hardening of Portland cement

V. I. Bolshakov, V. E. Vaganov, T. A. Bier, I. A. Bausk, I. M. Matiushenko, O. A. Ozhyshchenko, M. Y. Popov, A. M. SopilniakThe usage of smart materials for skin-diagnostics of building structures while their monitoring

A. Kremensas, R. Stapulionienė, S. Vaitkus, A. KairytėInvestigations on physical-mechanical properties of effective thermal insulation materials from fibrous hemp

P. Jaskula, M. Stienss, C. SzydłowskiEffect of polymer fibres reinforcement on selected properties of asphalt mixtures

P. Brzozowski, E. Horszczaruk, Khrystyna HrabiukThe influence of natural and nano-additives on early strength of cement mortars

P. Kral, P. Hradil, J. Kala, F. Hokes, M. HusekIdentification of the parameters of a concrete damage material model

J. Bureš, D. Dolak, K. Dvořák, D. VšijanskýMethodology of sample selection for study of limestone decarbonation

K. Dvorak, K. Kulísek, D. GazdičThe FBC ash as a hydraulic ingredient of hydraulic lime

A. Ubyzc, M. Maj, M. Musiał, J. UbyszRadon and civil engineering

D. Dobias, P. Pokornya, R. PernicovaEvaluation of resistance of intermetallic Fe-Zn coating in the model environment as concrete pore solution

Build

ing

Mat

eria

ls –

Pos

ter S

essi

on16

A. Slosarczyk, A. Kwiecińska, E. PełszykInfluence of selected metal oxides in micro and nanoscale on the mechanical and physical

J. J. Chen, P.L. Ng, L. G. Li, A. K. H. KwanAdiabatic temperature rise of concrete with limestone fines added as a filler

T. Kantela, A. SlosczascykInfluence of silicon carbide and electrocorundum on the thermal resistance of cement binders with granulated blast-furnace slag

J. Jasiczak, A. Slosczascyk, P. Kulczewski, A. KarłowskiExperimental laboratory validation of reproducing road viaducts concreting processes

S. Sychugov, Y. Tokarev, T. Plekhanova, O. Michailova, I. Pudov, R. Faizullin, A. Gaifulling, R. SagdievLine of approach to a problem of water resistance of anhydrite cements

A. Koper, W. Koper, M. KoperInfluence of raw concrete material quality on selected properties of recycled concrete aggregates

M. Iwański, J. MrugalaInfluence of the production process on the selected properties of asphalt concrete

L. Zarauskas, G. Skripkiūnas, G. GirskasInfluence of aggregate granulometry on air content in concrete mixture and freezing - thawing resistance of concrete

M. Iwański, J. MrugalaOptimization of composition of asphalt concrete with synthetic wax modified foamed bitumen in scope of resistance to climatic conditions

Build

ing

Mat

eria

ls –

Pos

ter S

essi

on

17

M. Linek A low shrinkage cement concrete intended for airfield pavements

G. N. Pervyshin, G. I. Yakovlev, A. F. Gordina, J. Kerene, I. S. Polyanskikh, H.-B. Fischer, N. R. Rachimova, A.F. BuryanovWater-resistant gypsum compositions with man-made modifiers

H. Eskandari, M. G. Nik, A. Z. NiaDynamic mix design optimization of high-performance concrete

K. M. HeizaState-of-the-art report on the assessment of fire-damaged RC bridges

P. Brzozovski, E. Horszczaruk, K. HrabiukThe influence of natural and nano-additives on early strength of cement mortars of cement mortars

Y. A. Sorvacheva, T. M. PetrovaThe role of chemical plasticizers additives in alkali-aggregate reaction

P. L. Ng, J. J. Chen, L. G. Li, A. K. H. KwanAdiabatic temperature rise of concrete with limestone fines added as a filler

A. C. Kowalska, W. Gardziejczyk, M. M. IwańskiAnalysis of IT-Cy stiffness modulus of foamed bitumen asphalt concrete compacted at 95ºC

R. Pernicova, D. Dobias, P. PokornyProblems connected with use of hot-dip galvanized reinforcement in concrete elements

Build

ing

Mat

eria

ls –

Pos

ter S

essi

on18

S. Leontev, K. Saraykina, V. Golubev, G. Yakovlev, N. Rakhimova, V. Shamanov, S. SenkovNon-destructive evaluation of the bond between a concrete added repair layer with variable thickness and a substrate layer using ANN

Y. L. Yaphary, R. H. W. Lam, D. LauChemical technologies for modern concrete production

A. C. Kowalska, P. RamiączekComparative evaluation and modification of laboratory compaction methods of road base mixtures manufac-tured in low-emission CIR technology with foamed bitumen and bitumen emulsion

M. K. Kazberuk, P. BerkowskiSurface scaling resistance of concrete subjected to freeze-thaw cycles and sustained load

P. Niewiadomski, D. Stefaniuk, J. HołaMicrostructural analysis of self-compacting concrete modified with the addition of nanoparticles

Build

ing

Mat

eria

ls –

Pos

ter S

essi

on

19

Stru

ctur

es –

Ses

sion

I20

Structures – Session I 13:30–15:00Thursday, May 26, 2016

Chairman: R. I. Gilbert, G. Kaklauskas

L. G. Hagsten, A. B. Rasmussen, J. FiskerStrain capacity of reinforced concrete members subjected to uniaxial tension

R. K. L. Su, Q. F. LiuIncremental displacement collocation method for the evaluation of tension softening curves of quasi-brittle materials

K. Holschemacher, S. Iqbal, A. Ali, T. A. BierStrengthening of RC beams using lightweight self-compacting cementitious composite

G. Kaklauskas, R. Ramanauskas, R. Jakubovskis, V. GelaziusA new technique for predicting crack spacing of reinforced concrete tension elements

A. K. H. Kwan, P. L. Ng, Z. M. WangMesoscopic analysis of crack propagation in concrete by nonlinear finite element method with crack queuing algo-rithm

A. B. Rasmussen, J. Fisker, L. G. HagstenCracking in flexural reinforced concrete members

M. Weisbrich, K. Holschemacher, S. KaesebergComparison between different fiber optical strain measurement systems based on the example of reinforcing bars

Stru

ctur

es –

Ses

sion

II

21

Structures – Session II 15:30–17:00Thursday, May 26, 2016

Chairman: K. Holschemacher, A. Šapalas

A. Macanovskis, A. Krasnikovsa, O. Kononova, A. LukasenoksBehavior of polymeric synthetic fiber in the concrete

A. A. Jokūbaitis, G. Marčiukaitis, J. ValivonisAnalysis of reinforcement anchorage zone behavior of prestressed concrete elements under static and cyclic loads

R. Szydlowski, M. MieszczakStudy of application of lightweight aggregate concrete to construct post-tensioned long-span slabs

T. Błaszczyński, M. Osesek, B. Gwozdowski, M. IlskiUse of deep hydrophobisation in repairs of RC engineering structures

T. Kania, B. StawiskiResearch on crack formation in gypsum partitions with doorway by means of FEM and Fracture mechanics

L. Sable, E. Skukis, G. Japins, K. KalninsCorrelation between numerical and experimental tests of laminated glass panels with visco-elastic interlayer

K. B. Vaivade, D. Serdjuks, V. Goremikins, A. Vilguts, L. PakrastinsExperimental verification of design procedure for elements from cross-laminated timber

Stru

ctur

es –

Ses

sion

III

22

Structures – Session III 11:00–12:30Friday, May 27, 2016

Chairman: R. D. Ziemian, D. Camotim

I. Paeglite, J. Smirnovs, A. PaeglitisDynamic behavior of pre-stressed slab bridges

P. Turkowski, M. Lukomski, P. Sulik, P. RoszkowskiFire resistance of CFRP-strengthened reinforced concrete beams under various load levels

A. Freimanis, A. PaeglitisMesh sensitivity in peridynamic quasi-static simulations

G. Krajewski, W. WęgrzyńskiAir barrier as a separation of smoke free zones in case of fire

M. Łukomski, P. Turkowski, P. Roszkowski, B. PapisFire resistance of unprotected steel beams – comparison between fire tests and calculation models

S. CzarneckiNon-destructive evaluation of the bond between a concrete added repair layer with variable thickness and a substrate layer using ANN

Stru

ctur

es –

Ses

sion

IV

23

Structures – Session IV 13:30–15:00Friday, May 27, 2016

Chairman: K. Rasmussen, H. Pasternak

D. Han, H. Zhang, T. Guo, J. Li, Y. LiuApplication of 3D laser scanning technology in modelling steel structure finite element

A. Hola, Z. Matkowski, J. HolaAnalysis of the moisture content of masonry walls in historical buildings using the basement of a medieval town hall as an example

R. Janeliukstis, S. Rucevskis, M. Wesolowski, A. ChateMultiple damage identification in beam structure based on wavelet transform

J. Lellep, A. LiyvapuuFree vibrations of uniform and hollow-sectional elastic arches

M. Maslak, M. Pazdanowski, J. Siudut, K. TarsaCorrosion durability estimation for steel shell of a tank used to store liquid fuels

G. Frolovs, K. Rocens, J. SliserisShear and tensile strength of narrow glued joint depending on the grain direction of plywood plies

Y. Ciupack, H. Pasternak, C. Mette, E. Stammen, K. DilgerAdhesive bonding in steel construction - challenge and innovation

24St

ruct

ures

– S

essi

on V

Structures – Session V 13:30–15:00Friday, May 27, 2016

Chairman: D. Camotim, R. D. Ziemian

R. Pichal, J. MachacekBuckling and post-buckling of prestressed stainless steel stayed columns

Z. KalaStability of von-Misses truss with initial random imperfections

I. MisiūnaitėComprehensive study on the stability and structural control of underslung beam.

Z. Kala, J. Valeš, J. MartinasekInelastic finite element analysis of lateral buckling for beam structures

T. Kraav, J. LellepElastic stability of uniform and hollow columns

25

Stru

ctur

es –

Pos

ter S

essi

on

Structures – Poster Session 10:30–11:00

H. Eskandari, A. M. Nic, A. GhaneiEffect of air entraining admixture on corrosion of reinforced concrete

A. SokasGraphical methods for designing bolted joints in engineering drawings

P. Ogrodnik, D. Pieniak, D. BilskiReseach on the impact of fireproof impregnation by preservatives containing nanoparticles on the strength of con-struction timber in increased temperatures

T. Falborski, R. JankowskiNumerical evaluation of dynamic response of a steel structure model under various seismic excitations

K. Rzeszut, T. G. MizeraAnalysis of semi-rigid connections Part I - Steel framework

E.Atutis, M. Atutis, M. Budvytis, J. ValivonisServiceability and shear response of RC beams prestressed with a various types of FRP bars

R. Jaskulski, P.WilinskiProbabilistic analysis of shear resistance assured by concrete compression

F. I. Olmedo, J. Valivonis, A. CoboExperimental study of multilayer beams of lightweight concrete and normal concrete

M. K. Kazberuk, P. BerkowskiSurface scaling resistance of concrete subjected to freeze-thaw cycles and sustained load

P. Bílý, J. Fládr, A. KohoutkováBehavior of anchorage areas in the steel-concrete composite structure loaded by longitudinal shear forces

Friday, May 27, 2016

Stru

ctur

es –

Pos

ter S

essi

on26

R. StudzinskiExperimental analysis of sandwich panels with hybrid core made of aerogel and polyurethane foam

M. MajSome causes of reinforced concrete silos failure

Ž. Bučmys, A. DaniūnasComponent method in the strength evaluation of cold-formed steel joints

J. ParasonisStady of a cold roof false solution

B. Sędłak, P. Sulik, D. Izydorczyk, M. Łukomski Fire-stop wraps and collars with intumescent materials – performance comparison

P. Berkowski, M. K. KazberukMaterial and structural destruction of concrete elements in the industrial environment

R. Kliukas, R. VadlūgaA practical method for designing chimneys

P. Sulik, B. K. Papis, D. Izydorczyk, M. ŁukomskiFire safety of elevated helicopter landing sites

B. Papis, P. Sulik, B. Sędłak, P. RoszkowskiAluminium glazed partition systems with specific fire resistance

T. Šlivinskas, B. Jonaitis, R. ZavalisMortar compressive strength estimation by applying various experimental test methods

A. Rimkus, R. Jakstaite, R. Kupliauskas, L. Torres, V. GribniakExperimental identification of cracking parameters of concrete ties with different reinforcement and testing layouts

Stru

ctur

es –

Pos

ter S

essi

on

27

M. BaszeńSemi-rigid behavior of joints in wood light-frame structures

N. Lasowicz, R. JankowskiExperimental and numerical analysis of an aluminum cantilevered beam with polymer adhesive

P. Roszkowski, B. Sedlak, P. Turkowski, D. IzydorczykThermal insulation of EPDM linear joint seals depending on the depth and width

J. Novák, A. Kohoutková, CSc. FengFire response of hybrid fiber reinforced concrete to high temperature

M. Kaluza, J. HulimkaMethacrylate adhesives to create CFRP laminate-steel joints – preliminary static and fatigue tests

G. Šakalys, A. DaniūnasNumerical investigation on web crippling behaviour of cold-formed C-section beam with vertical stiffeners

M. Szumigała, Ł. PolusAn experimental study and numerical simulation of an aluminium-concrete beam

J, Hulimka, M. KaluzaPreliminary tests of steel-to-steel adhesive joints

D. Izydorczyk, B. Sędłak, B. Papis, P. TurkowskiDoors with specific fire resistance class

D. Piotr, K. KrzysztofResearch in redistribution of bending moments in the beams of reinforced concrete early loaded

F. Hokes, P. Kral, O. Krnavek, M. HusekImproved sensitivity analysis in the inverse identification of the parameters of a nonlinear material model

28St

ruct

ures

– P

oste

r Ses

sion

M. Demby, J. ŚcigałłoDesign aspects of the safe structuring of reinforcement in reinforced concrete bending beams

K. Ciesielczyk, M. Szumigala, J. ScigalloThe numerical analysis of the effective flange width in T-section reinforced beams

J. Scigallo, T. G. MizeraInfluence of elevated temperature on load bearing capacity of reinforced fine-grained concrete

W.Szymkuc, N. BiskupskaTowards the simplified modelling of thermal and mechanical response of steel tubular columns exposed to localized fire

P. W. Sielicki, T. Łodygowski, H. Al-Rifaie, W. SumelkaDesigning of blast resistant lightweight elevation system - numerical study

D. Bačinskas, A. Rimkus, D. Rumšys, A. Meškėnas, S. Bielinis, A. Sokolov, T. MerkevičiusStructural analysis of GFRP truss bridge model

D. Rumšys, D. Bačinskas, E. Spudulis, A. MeškėnasComparison of material properties of lightweight concrete with recycled polyethylene and expanded clay aggregates

V. Tamulenas, R. Ramanauskas, G. KaklauskasExperimental and numerical investigation on tensile concrete elements bonded with external CFRP sheets

E. Labans, K. Zudrags, K. KalninsStructural performance of wood based sandwich panels in four point bending

J. Šliseris, L. Gaile, L. PakrastiņšDeformation process numerical analysis of T-stub flanges with pre-loaded bolts

M. Malendowski, A. GlemaDevelopment and implementation of coupling method for CFD-FEM analyses of steel structures in natural fire

M. Chybiński, A. GarsteckiDiagonal versus orthogonal ribs in stability of steel I beams

29

Stru

ctur

es –

Pos

ter S

essi

on

G. Marčiukaitis, L. JuknevičiusDeviation in deflections of eccentrically prestressed reinforced concrete structures

A. Šapalas, G. Šaučiuvėnas, K. RasiulisBehavior of hollow composite steel-concrete members under long-term axial compression

M. Konecki, J. GałajFlame transfer through the external walls insulation of the building during a fire

B. Jonaitis, R. Zavalis, J. OganianExperimental investigation of the behavior of brick lintels

M. SzumigałaIterative Methods of Beam-Structure Analysis

E. Skukis, O. Ozolins, K. Kalnins, M A. ArbeloExperimental test for estimation of buckling load on unstiffened cylindrical shells by vibration correlation technique

O. Ozolins, K. KalninsAn experimental buckling study of column-supported cylinder

G. Sandovič, A. JuozapaitisIvestigation the shape stabilization of stress ribbon bridges with flexible and rigid cables

T. Drzymała, W. J. Rek, M. Tomaszewski, A. Kuś, J. Gałaj, R. ŠukysEffects of high temperature on the properties of high performance concrete (HPC)

E. Vanagas, R. Kliukas, O. LukoševičienėStrength of circular concrete columns reinforced with FRP bars and spirals

G. Marčiukaitis, R. ŠalnaCalculation of punching shear strength of steel fiber reinforced concrete flat slabs

S. Žilėnaitė, A. JuozapaitisComparative analysis of buckling factor of the steel arch bridges

Build

ing

Tech

nolo

gies

and

Man

agem

ent –

Ses

sion

I30

Building Technologies and Management – Session I

Chairman: B. Hoła, Z. Turskis

B. Hoła, M. SzóstakaMethodology of analysing the accident rate in the construction industry

J. Malesza, C. MiedziałowskiCurrent directions in development of modern wood-framed houses

S. Ulubeyli, A. Kazaz, V. ArslanConstruction and demolition waste recycling plants revisited: management issues

P. Drukis, L. Gaile, L. PakrastinsInspection of public buildings based on risk assessment

M. NowakDefining project approach using decision tree and quasi-hierarchical multiple criteria method

I. Pukīte, I. GeipeleDifferent approaches to building management and maintenance meaning explanation

W. Węgrzyński, G. KrajewskiCombined wind engineering, smoke flow and evacuation analysis for a design of a natural smoke and heat ventilation system

J. Lopes, R. Oliveira, M. I. AbreuThe sustainability of the construction industry in Sub-saharan Africa: some new evidence from recent data

13:30–15:00Thursday, May 26, 2016

Build

ing

Tech

nolo

gies

and

Man

agem

ent –

Ses

sion

II

31

Building Technologies and Management – Session II

Chairman: M. Dytczak, J. Antuchevičienė

D. V. Shkundalov, V. PopovDevelopment of BIM and Digital city models visualization methods using Web Graphic Library

E. Balionis, D. Migilinskas, R. D. TumėnienėThe multicriteria assessment of multi-storey office building energy performance

M. I. Abreu, R. Oliveira, J. LopesAttitudes and practices of homeowners in the decision-making process for building energy renovation

S. A. Erdogan, J. Šaparauskas, Z. TurskisDecision making in construction management: AHP and Expert Choice Approach

M. Dytczak, G. Ginda, B. JastrząbekSpecific applications of selected pair-wise comparison-based tools

M. Dytczak, G. GindaDiverse ways of the application of pair-wise comparison-based tools in civil engineering

L. Kauškale, I. GeipeleIntegrated approach of real estate market analysis and real estate investment and construction decision support system

T. Garbowski, T. GajewskiSemi-automatic inspection tool of pavement condition from three-dimensional profile scans

15:30–17:00Thursday, May 26, 2016

32Bu

ildin

g Te

chno

logi

es a

nd M

anag

emen

t – P

oste

r Ses

sion

Building Technologies and Management – Poster Session M. Pavlovskis, J. Antucheviciene, D. MigilinskasAssessment of buildings redevelopment possibilities using MCDM and BIM techniques

A. SzajewskaDevelopment of the thermal imaging camera (TIC) technology

P. Wrobel, L. OstapiukThe issue of designing smoke venting systems in small leased units of production and storage hallsS. Wandahl, S. Yicheng, K. J. ZygmuntReducing variability of workforce as a tool to improve plan reliabilityN. Koseleva, G. RopaiteBig data in building energy efficiency: Understanding of big data and main challengesL. Tupenaite, L. Kanapeckiene, J. NaimavicieneDeterminants of housing market fluctuations: case study of Lithuania M. Mickaitis, A. Jagniatinskis, B. FiksConference room acoustical rating in terms of reverberation timeJ. Tamosaitiene, E. K. Zavadskas, I. Sileikaite, Z. TurskisA novel hybrid MCDM approach for complicated Supply chain management problems in constructionA. Peckienė, L. UstinovičiusPossibilities for building spatial planning using BIM methodologyD. Skoruks, J. Nazarova, M. ŠenfeldeMonopolisation trend conditionality under modern economic conditions: a case study of road construction public procurement conjuncture

15:00–15:30Thursday, May 26, 2016

33

Build

ing

Tech

nolo

gies

and

Man

agem

ent –

Pos

ter S

essi

on

Building Technologies and Management – Poster Session M. Pavlovskis, J. Antucheviciene, D. MigilinskasAssessment of buildings redevelopment possibilities using MCDM and BIM techniques

A. SzajewskaDevelopment of the thermal imaging camera (TIC) technology

P. Wrobel, L. OstapiukThe issue of designing smoke venting systems in small leased units of production and storage hallsS. Wandahl, S. Yicheng, K. J. ZygmuntReducing variability of workforce as a tool to improve plan reliabilityN. Koseleva, G. RopaiteBig data in building energy efficiency: Understanding of big data and main challengesL. Tupenaite, L. Kanapeckiene, J. NaimavicieneDeterminants of housing market fluctuations: case study of Lithuania M. Mickaitis, A. Jagniatinskis, B. FiksConference room acoustical rating in terms of reverberation timeJ. Tamosaitiene, E. K. Zavadskas, I. Sileikaite, Z. TurskisA novel hybrid MCDM approach for complicated Supply chain management problems in constructionA. Peckienė, L. UstinovičiusPossibilities for building spatial planning using BIM methodologyD. Skoruks, J. Nazarova, M. ŠenfeldeMonopolisation trend conditionality under modern economic conditions: a case study of road construction public procurement conjuncture

M. TelejkoAttempt to improve indoor air quality in computer laboratoriesR. SzelągThe use of BIM technology in the process of analyzing the increased effort of structural elementsD. Walasek, A. BarszczAnalysis of the adoption rate of Building Information Modeling [BIM] and its Return on Investment [ROI]A. Jagniatinskis, M. Mickaitis, B. FiksImplication reverberation time criteria in acoustic classification scheme for buildings

34G

eote

chni

cs –

Ses

sion

Geotechnics – Session 9:00–10:30Friday, May 27, 2016

Chairman: M. Ziegler, A. Norkus

J. Štefaňák, L. Miča, J. Chalmovský, A. Leiter, P. TichýFull-scale testing of ground anchors in neogene clay

R. Ossowski, K. GwizdalaMechanical properties of a dike formed from a soil-ash composite

P. Skels, K. BondarsApplicability of small strain stiffness parameters for pile settlement calculation

V. Martinkus, A. Norkus, M. MikolainisNumerical simulation of displacement model pile test performed in artificial sand deposit

R. Balevičius, Z. MrózAnalytical modelling of combined slip and sliding modes in contact interaction of two spherical grains

U. Radvilaitė, R. Kačianauskas, D. Rusakevičius, A. JarasModelling soil particles by low-resolution spherical harmonics

J. Medzvieckas, N. Dirgėlienė, Š. SkuodisStress-strain states differences in specimens during triaxial compression and direct shear tests

Geo

tech

nics

– P

oste

r Ses

sion

35

Geotechnics – Poster Session 10:30–11:00

I. Vaníček, M. VaníčekGeotechnical risk and earth structures

T. Ivanova, V. Turchin, L. Yudina, V. Krutikov, S. Sychugov, Y. Gmizov, K. ZikinBinding and hardening operations of loess collapsing soils under the school reconstruction in the city of Malgobek, the republic of Ingushetia

R. Mackevičius, D. Sližytė, T. ZhilkinaInfluence of calcite particles on mechanical properties of grouted sandy soil

N. Dirgėlienė, Š. Skuodis, A. GrigusevičiusExperimental and numerical analysis of direct shear test

T. Statkus, A. Norkus, M. MikolainisExperimental investigation of settlement in sand soil of jacked pile subjected by vertical compressive cyclic loading

E. Zdancevičius, R. Kačianauskas, D. ZabulionisImprovement of viscoelastic damping for hertz contact of particles due to impact velocity

G. Wysocki, B. Ksi, M. KuczThe influence of a low bearing subgrade on the stability of a shared street (woonerf ) foundation

T. Błaszczyński, M. Babiak, J. Kosno, S. WęglińskiFreeze - thaw resistance and increased strength of cohesive soils modified with a cationic surfactant

Friday, May 27, 2016

G e n e r a l S p o n s o r

SOFiSTiK AG and CSD INŽINIERIAI, UAB – the official SOFiSTiK dealer in Baltic states

www.sofistik.de and www.csdengineers.lt