Temperature Sensor IC For a fully calibrated and accurate...
13
1/4 TSic™ 206/203/201/306/303/301 Temperature Sensor IC For a fully calibrated and accurate low power temperature measurement Benefits & Characteristics Fully calibrated • Custom calibration and assembly available • Outstanding accuracy of +/- 0.3 K (TSic™ 30x) • Accuracy range of 80 K can be shifted (default: 10 °C to 90 °C) • Very low power consumption • Available with digital, analog and ratiometric output signal • Excellent long-term stability • Illustration Technical Data Operating temperature range:* -50 °C to +150 °C (+/- 3 °C of measurement limits) Accuracy:* TSic 20x +/- 0.5 K in the range of 10 °C to 90 °C (other ranges on request) TSic 30x +/- 0.3 K in the range of 10 °C to 90 °C (other ranges on request) Resolution:* 0.1 K Sampling rate:* 10 Hz Supply voltage: V + = 3 V to 5.5 V, high precision operation in range V + = 4.5 V to 5.5 V Supply current: typ. 30 μA at 25 °C and V + = 3.3 V for minimal self-heating Packaging:* SOP-8 or TO92 (other packaging on request) * Customer specific alternatives available Packaging pin assignment: Pin 1 Pin 2 Pin 3 Pin 4 SOP-8 (5, 6, 7 and 8 not used) V+, Supply voltage (3 V to 5.5V) Signal Not used GND TO92 GND Signal V+, Supply voltage (3 V to 5.5 V)
Transcript of Temperature Sensor IC For a fully calibrated and accurate...
1/4
TSic™ 206/203/201/306/303/301Temperature Sensor ICFor a fully calibrated and accurate low power temperature measurement
Benefits & Characteristics
Fully calibrated• Custom calibration and assembly available• Outstanding accuracy of +/- 0.3 K (TSic™ 30x)• Accuracy range of 80 K can be shifted (default: 10 °C to 90 °C)• Very low power consumption • Available with digital, analog and ratiometric output signal• Excellent long-term stability •
Illustration
Technical Data
Operating temperature range:* -50 °C to +150 °C (+/- 3 °C of measurement limits)Accuracy:* TSic 20x +/- 0.5 K in the range of 10 °C to 90 °C (other ranges on request)
TSic 30x +/- 0.3 K in the range of 10 °C to 90 °C (other ranges on request)Resolution:* 0.1 KSampling rate:* 10 HzSupply voltage: V+ = 3 V to 5.5 V, high precision operation in range V+ = 4.5 V to 5.5 VSupply current: typ. 30 μA at 25 °C and V+ = 3.3 V for minimal self-heatingPackaging:* SOP-8 or TO92 (other packaging on request)
* Customer specific alternatives available
Packaging pin assignment: Pin 1 Pin 2 Pin 3 Pin 4SOP-8 (5, 6, 7 and 8 not used) V+, Supply voltage
(3 V to 5.5V)Signal Not used GND
TO92 GND Signal V+, Supply voltage (3 V to 5.5 V)
2/4
TSic™ 206/203/201/306/303/301Temperature Sensor ICFor a fully calibrated and accurate low power temperature measurement
Absolute max. rating Min MaxSupply voltage (V+) -0.3 V 6 VVoltages to analog I/O – Pins (VINA, VOUTA) -0.3 V VDDA+0.3 VStorage temperature range (TSTOR) -20 °C 80 °C
Operating conditions Min Typ MaxSupply voltage to GND (V+) 2.97 V 5 V 5.5 VSupply current (IV+) @ V+ = 3.3 V, RT 25 μA 30 μA 60 μAOperating temperature range (Tamb) -50 °C +150 °COutput load capacitance (CL) 15 nFExternal capacitance between V+ and GND1) (CV+) 100 nF (recommended)
Output load resistance between signal and GND (or V+)
47 kOhm
Temperature accuracies2) TSic 30x TSic 20xT1: +10 °C to 90 °C +/- 0.3 K +/- 0.3 KT2: -20 °C to +110 °C +/- 0.6 K +/- 1 KT3: -50 °C to +150 °C +/- 1.2 K +/- 2 K
1) Recommended as close to TSic V+ and GND-Pins as possible
2) The sensor is calibrated at 5 V. The provided accuracy is applicable for a supply voltage between 4.5 V and 5.5 V. The accuracy is smaller with a supply voltage between 2.97 V and 4.5 V. For applications where the best accuracy at 3 V is requested, ask for a custom specific 3 V calibrated device. Other TSicTM products with custom specific calibrations are available upon request e.g. other temperature range for high accuracy. Accuracy at delivery; the assembly method can influence the accuracy!
Order Information - SOP-8
Output signal Analog Analog ratiometric Digital, ZACWire protocol
201/203/206 TSic 201 SOP-8 TSic 203 SOP-8 TSic 206 SOP-8Order code 030.00038 030.00060 030.00005301/303/306 TSic 301 SOP-8 TSic 303 SOP-8 TSic 306 SOP-8Order code 030.00036 030.00024 030.00006
TSic™ 206/203/201/306/303/301Temperature Sensor ICFor a fully calibrated and accurate low power temperature measurement
Order Information - TO92
Output signal Analog Analog ratiometric Digital, ZACWire protocol
201/203/206 TSic 201 TO92 TSic 203 TO92 TSic 206 TO92Order code 030.00056 030.00095 030.00049301/303/306 TSic 301 TO92 TSic 303 TO92 TSic 306 TO92Order code 030.00047 030.00074 030.00044
Additional Electronics
Document name:Labkit DTTSicLABkit_E
3/4
DTT
Sic
20x_
30x_
E2.
1
4/4
All mechanical dimensions are valid at 25 °C ambient temperature, if not differently indicated • All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics • Technical changes without previous announcement as well as mistakes reserved • The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes • Load with extreme values during a longer period can affect the reliability • The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner • Typing errors and mistakes reserved • Product specifications are subject to change without notice • All rights reserved
Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) 71 992 01 00 | Fax: +41 (0) 992 01 99 | E-mail: [email protected] | Web: www.ist-ag.com
Order InformationTemperature Sensor ICSecondary reference
TSic Accuracy2 = +/- 0.5 °C at 80 °C range3 = +/- 0.3 °C at 80 °C range4 = not defined5 = +/- 0.1 °C at 40 °C range (limited measuring range from -10 °C to + 60 °C)6 = not defined7 = +/- 0.07 °C at 20 °C range (limited measuring range from -10 °C to + 60 °C)
Bit size0 = 11 bit1 = 14 bit
Output signal1 = analog 0 V to 1 V3 = ratiometric 10 % to 90 % V+
6 = digital ZACWire protocol
HousingSOP-8TO92KGD („known-good-die“ in waffle pack, 100 pcs/pkg)
SpecialE.g. „250 Hz“ for a high sampling rate or „-30/70“ for temperature and tolerance range1)
TSic 3 0 6 TO92 -30/70
TSic 3 0 6 TO92 -30/701) Standard: no value
1/4
TSic™ 506F/503F/501FTemperature Sensor ICFor a fully calibrated and very accurate low power temperature measurement
Benefits & Characteristics
Fully calibrated • Custom calibration and assembly available• Outstanding accuracy of +/- 0.1 K • Available with digital, analog and ratiometric output signal• Very low power consumption • Accuracy range of 40 K can be shifted (default: 5 °C to 45 °C)• Excellent long-term stability •
Illustration
Technical Data
Operating temperature range:* -10 °C to +60 °C (+/- 3 °C of measurement limits)Accuracy:* +/- 0.1 K in the range of 5 °C to 45 °C (other ranges upon request)Resolution:* 0.034 KSampling rate:* 10 HzSupply voltage: V+ = 3 V to 5.5 V, high precision operation in range V+ = 4.5 V to 5.5 VSupply current: typ. 30 μA at 25 °C and V+ = 3.3 V for minimal self-heatingPackaging:* SOP-8 or TO92
* Customer specific alternatives available
Packaging pin assignment: Pin 1 Pin 2 Pin 3 Pin 4SOP-8 V+, Supply voltage
(3 V to 5.5V)Signal Not used GND
TO92 GND Signal V+, Supply voltage(3 V to 5.5 V)
TSic™ 506F/503F/501FTemperature Sensor ICFor a fully calibrated and very accurate low power temperature measurement
Absolute max. rating: Min Max
Supply voltage (V+): -0.3 V 6 VVoltages to analog I/O – Pins (VINA, VOUTA): -0.3 V VDDA+0.3 VStorage temperature range (TSTOR): -20 °C 80 °C
Operating conditions: Min Typ MaxSupply voltage to GND (V+): 2.97 V 5 V 5.5 VSupply current (IV+) @ V+ = 3.3 V, RT: 25 μA 30 μA 60 μAOperating temperature range (Tamb): -10 °C +60 °COutput load capacitance (CL): 15 nFExternal capacitance between V+ and GND1) (CV+): 100 nF (recommended)
Output load Resistance between signal and GND (or V+):
47 kOhm
Temperature accuracies:2)
T1: 5 °C to 45 °C +/- 0.1 KT2: -10 °C to 60 °C +/- 0.2 K
1) Recommended as close to TSic V+ and GND-Pins as possible
2) The sensor is calibrated at 5 V. The provided accuracy is applicable for a supply voltage between 4.5 V and 5.5 V. The accuracy is smaller with a supply voltage between 2.97 V and 4.5 V. For applications where the best accuracy at 3 V is requested, ask for a custom specific 3 V calibrated device. Other TSicTM products with custom specific calibrations are available upon request e.g. other temperature range for high accuracy. Accuracy at delivery; the assembly method can influence the accuracy!
Order Information - SOP-8
Output signal Analog Analog ratiometric Digital, ZACWire protocol
501/503/506 TSic 501F SOP-8 TSic 503F SOP-8 TSic 506F SOP-8Order code 030.00034 030.00054 030.00007
2/4
TSic™ 506F/503F/501FTemperature Sensor ICFor a fully calibrated and very accurate low power temperature measurement
Order Information - TO92
Output signal Analog Analog ratiometric Digital, ZACWire protocol
501/503/506 TSic 501F TO92 TSic 503 TO92 5V TSic 506F TO92Order code 030.00046 030.00115 030.00045
Additional Electronics
Document name:Labkit DTTSicLABkit_E
3/4
All mechanical dimensions are valid at 25 °C ambient temperature, if not differently indicated • All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics • Technical changes without previous announcement as well as mistakes reserved • The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes • Load with extreme values during a longer period can affect the reliability • The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner • Typing errors and mistakes reserved • Product specifications are subject to change without notice • All rights reserved
4/4
All mechanical dimensions are valid at 25 °C ambient temperature, if not differently indicated • All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics • Technical changes without previous announcement as well as mistakes reserved • The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes • Load with extreme values during a longer period can affect the reliability • The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner • Typing errors and mistakes reserved • Product specifications are subject to change without notice • All rights reserved
DTT
Sic
50x_
E2.
1
Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) 71 992 01 00 | Fax: +41 (0) 992 01 99 | E-mail: [email protected] | Web: www.ist-ag.com
Order InformationTemperature Sensor ICSecondary reference
TSic Accuracy2 = +/- 0.5 °C at 80 °C range3 = +/- 0.3 °C at 80 °C range4 = not defined5 = +/- 0.1 °C at 40 °C range (limited measuring range from -10 °C to + 60 °C)6 = not defined7 = +/- 0.07 °C at 20 °C range (limited measuring range from -10 °C to + 60 °C)
Bit size0 = 11 bit1 = 14 bit
Output signal1 = analog 0 V to 1 V3 = ratiometric 10 % to 90 % V+
6 = digital ZACWire protocol
HousingSOP-8TO92KGD („known-good-die“ in waffle pack, 100 pcs/pkg)
SpecialE.g. „250 Hz“ for a high sampling rate or „-30/70“ for temperature and tolerance range1)
TSic 3 0 6 TO92 -30/70
TSic 3 0 6 TO92 -30/701) Standard: no value
1/3
TSic™ 716Temperature Sensor ICFor a fully calibrated and extremely accurate low power temperature measurement
Benefits & Characteristics
Fully calibrated (custom calibration and assembly available)• Accuracy range of 20 K can be shifted (default: 25 °C to 45 °C)• Outstanding accuracy of +/- 0.07 K • Easy to integrate (digital output signal)• Very low power consumption • Capable of communicating over a distance of > 10 m• Excellent long-term stability •
Illustration
Technical Data
Operating temperature range:* -10 °C to +60 °C (+/- 3 °C of measurement limits)Accuracy:* +/- 0.07 K in the range of 25 °C to 45 °C (other ranges upon request)Resolution:* 4 mKSampling rate:* 10 HzSupply voltage:* 4.5 V to 5.5 VSupply current: typ. 45 μA at 25 °C and 5 V for minimal self-heatingDigital signal output: (14 bit) compatible with state-of-the-art microcontrollers using only a single signal wirePackaging:* TO92
* Customer specific alternatives available
Packaging pin assignment: Pin 1 Pin 2 Pin 3 Pin 4
TO92 GND Signal V+, Supply voltage(3 V to 5.5 V)
TSic™ 716Temperature Sensor ICFor a fully calibrated and extremely accurate low power temperature measurement
Absolute max. rating: Min MaxSupply voltage (V+) -0.3 V 6 VVoltages to analog I/O – Pins (VINA, VOUTA) -0.3 V VDDA+0.3 VStorage temperature range (TSTOR) -20 °C 80 °C
Operating condition Min Typ MaxSupply voltage to GND (V+) 2.97 V 5 V 5.5 VSupply current (IV+) @ V+ = 3.3 V, RT 30 μA 45 μA 80 μAOperating temperature range (Tamb) -10 °C +60 °COutput load capacitance (CL) 15 nFExternal capacitance between V+ and GND1) (CV+) 100 nF (recommended)
Output load resistance between signal and GND (or V+)
47 kOhm
Temperature accuracies2)
T1: 25 °C to 45 °C +/- 0.07 KT2: -10 °C to 60 °C +/- 0.2 K
1) Recommended as close to TSic V+ and GND-Pins as possible
2) The sensor is calibrated at 5 V. The provided accuracy is applicable for a supply voltage between 4.5 V and 5.5 V. The accuracy is smaller with a supply voltage between 2.97 V and 4.5 V. For applications where the best accuracy at 3 V is requested, ask for a custom specific 3 V calibrated device. Other TSicTM products with custom specific calibrations are available on request e.g. other temperature range for high accuracy. Accuracy at delivery; the assembly method can influ-ence the accuracy!
Order Information - TO92
Output signal Digital, ZACWire protocol
716 TSic 716 TO92Order code 030.00048
Additional Electronics
Document name:Labkit DTTSicLABkit_E
2/3
DTT
Sic
716_
E2.
1
3/3
All mechanical dimensions are valid at 25 °C ambient temperature, if not differently indicated • All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics • Technical changes without previous announcement as well as mistakes reserved • The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes • Load with extreme values during a longer period can affect the reliability • The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner • Typing errors and mistakes reserved • Product specifications are subject to change without notice • All rights reserved
Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) 71 992 01 00 | Fax: +41 (0) 992 01 99 | E-mail: [email protected] | Web: www.ist-ag.com
Order InformationTemperature Sensor ICSecondary reference
TSic Accuracy2 = +/- 0.5 °C at 80 °C range3 = +/- 0.3 °C at 80 °C range4 = not defined5 = +/- 0.1 °C at 40 °C range (limited measuring range from -10 °C to + 60 °C)6 = not defined7 = +/- 0.07 °C at 20 °C range (limited measuring range from -10 °C to + 60 °C)
Bit size0 = 11 bit1 = 14 bit
Output signal1 = analog 0 V to 1 V3 = ratiometric 10 % to 90 % V+
6 = digital ZACWire protocol
HousingSOP-8TO92KGD („known-good-die“ in waffle pack, 100 pcs/pkg)
SpecialE.g. „250 Hz“ for a high sampling rate or „-30/70“ for temperature and tolerance range1)
TSic 3 0 6 TO92 -30/70
TSic 3 0 6 TO92 -30/701) Standard: no value
TSic™ LABkit for USB/WindowsTemperature Sensor ICAn effective Plug&Play development tool
Benefits & Characteristics
Allows simultaneous display (up to 4 temperature • signals in real time)
User-friendly software for temperature data display and • customer-specific sensor configurations
Easy testing of TSic• TM without programming micro-controllers
Display of min., max. and average temperatures for each • attached sensor
Measurement interval selection and data recording• Data recording in a text file (can be exported to other appli-• cations e.g. Excel)
Illustration
Technical Data
Compatible TSicTM sensors: TSic206, TSic306, TSic506F, TSic716PC system requirements: Microsoft Windows 98, Windows 8.1, 2000 or XP; 200 MHz CPU; 64 MB RAM; 10 MB disk
space; CDROM or DVD drive; USB interfacePC-connection: USB with 1 m (3 ft.) cableConnector: Molex 22-01-2035LABkit includes: USB adapter for up to four temperature sensors (USB cable included), 4 TSic 306 TO92 1)
sensor ICs with cable, recorder data acquisition, display and recording software for PC/Windows 2)
1) Other sensor combinations on request
2) Installation in German only; running software both in German and English
Packaging pin assignment: Pin 1 Pin 2 Pin 3
TO92 GND (VSS) Signal V+ (VDD), supply voltage (3 V to 5.5 V)
1/2
V+ (must be connected in the white area)SIGGND
TSic™ LABkit for USB/WindowsTemperature Sensor ICAn effective Plug&Play development tool
Order Information
TSic LABkit für USB/WindowsOrder code 030.00101
DTT
Sic
LA
BK
it_E
2.1
2/2
All mechanical dimensions are valid at 25 °C ambient temperature, if not differently indicated • All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics • Technical changes without previous announcement as well as mistakes reserved • The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes • Load with extreme values during a longer period can affect the reliability • The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner • Typing errors and mistakes reserved • Product specifications are subject to change without notice • All rights reserved
Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) 71 992 01 00 | Fax: +41 (0) 992 01 99 | E-mail: [email protected] | Web: www.ist-ag.com
