Tecn ata - HPL Service · 2019. 6. 18. · www .polyrey .com Tecn ata EN Cor 213 or rs rsr o n s on...
Transcript of Tecn ata - HPL Service · 2019. 6. 18. · www .polyrey .com Tecn ata EN Cor 213 or rs rsr o n s on...
-
www.polyrey.com
Technical Data
EN
© C
opyr
ight
201
3, P
olyr
ey. A
ll rig
hts
rese
rved
. Sub
ject
to c
hang
e, p
leas
e co
ntac
t us.
PANOPREY® Melamine Faced Board
Applications
1 2
1/2
Properties
Product Offer
CORE Chipboard MDF
SIZE 280 × 207 cm
FINISH FA - BRI - EXM - GRAIN - EPM - LEG
GRADE
Standard 8 - 12 - 16 - 19 - 25 -30 mm 12 - 16 - 19 mm
Moisture resistant 19 mm -
Fire retardant 12 - 16 - 19 mm -
1/ Decorative paper on both sides impregnated with melamine resin.
2/ Chipboard or MDF core.
ÉPIMAT (EPM): not available in Panoprey 8 mm - Panoprey BRI: only available in 19 mm, standard grade.
• Economical decorative panel ready to use. • Good scratch resistance and cleanability. • Aesthetic quality (edging, surface appearance) and MDF strength.
• Decorative on both sides. • Food safe (IANESCO approved).
• Suitable for vertical use (partitions) and moderate horizontal use (furniture) in low-traffic environments. • Available in moisture resistant grade for humid environments. • Panoprey /Polyrey HPL/Compact Reysipur/Polyprey complementary products for harmonious interior design applications:
156 decors available in Panoprey, which can be coordinated with HPL sizes 307×124 or 307×132 cm.
72 decors available in HPL door size 215×97 cm and 245×124 cm.
Matching melamine and ABS edgings for a perfect finish (available from our partners, please contact us).
crackresistant
scratchresistant
ease of maintenance
resistant to chemical and household products
hygienicsurface
colour fastness under artificial light
-
www.polyrey.com
Technical Data
EN
© C
opyr
ight
201
3, P
olyr
ey. A
ll rig
hts
rese
rved
. Sub
ject
to c
hang
e, p
leas
e co
ntac
t us.
PANOPREY®
2/2
Food safe EN 13130-1 Yes Yes Yes Yes
Formaldehyde emission EN 717-2 Class E1 E1 E1 E1
Volatile organic compounds (VOC) emission ISO 16000-9 Class A A A A
CORE Standardgrade chipboardFire retardant
grade chipboardMoisture resistant grade chipboard
Standard grade MDF
DECOR / FINISH All decors / Finishes
THICKNESS 8-12-16-19-25-30 mm 12-16-19 mm 19 mm 12-16-19 mm
Conforms EN 14322 CLASSIFICATION EN 312 Type P2 EN 312 Type P2 EN 312 Type P3 EN 622-5CHARACTERISTICS STANDARD UNITS
Physical and dimensional properties
Mechanical properties
Surface properties
Fire performance
Health and environmental characteristics
Density EN 323 kg/m3 650 ± 10 % 700 ± 10 % 670 ± 10 % 760 ± 10 %
Moisture content (ex-factory) EN 322 % 5 to 13 5 to 13 5 to 13 4 to 11
Thickness tolerance EN 14323 mm ± 0.3 ± 0.3 ± 0.3 ± 0.3
Length and width tolerance EN 14323 mm ± 5 ± 5 ± 5 ± 5
Straightness tolerance EN 324-1 & 2 mm/m ≤ 1.5 ≤ 1.5 ≤ 1.5 ≤ 1.5
Squareness tolerance EN 324-1 & 2 mm/m ≤ 2 ≤ 2 ≤ 2 ≤ 2
Flatness tolerance (thickness ≥ 16 mm) EN 14323 mm/m ≤ 2 ≤ 2 ≤ 2 ≤ 2
Impact resistance to a 324 g ball(drop height for ≤ 10mm diameter imprint)
EN 14323 mm ≥ 500 ≥ 500 ≥ 500 ≥ 500
Surface cohesion EN 311 MPa ≥ 1.0 ≥ 1.0 ≥ 1.0 ≥ 1.0
Bending strength EN 310 N/mm²8-12-16-19 mm: 1125 mm: 10.530 mm: 9.5
12-16-19 mm: 11 19 mm: 1412 mm: 2216-19 mm: 20
Modulus of elasticity EN 310 N/mm²
8-12 mm: 180016-19 mm: 160025 mm: 150030 mm:1350
12 mm: 180016-19 mm: 1600
19 mm: 195012 mm: 220016-19 mm: 2500
Internal cohesion EN 319 N/mm²
8-12 mm: 0.4016-19 mm: 0.3525 mm: 0.3030 mm: 0.25
8-12 mm: 0.4016-19 mm: 0.35
19 mm: 0.4512 mm: 0.6016-19 mm: 0.55
Thickness swelling after 24 h EN 317 % - - ≤ 14 -
Internal cohesion under cyclic test conditions EN 321 N/mm² - - 0.13 -
Thickness swelling under cyclic test conditions EN 321 % - - ≤ 13 -
Surface defects
- Spots EN 14323 mm²/m² ≤ 2 ≤ 2 ≤ 2 ≤ 2- Linear mm/m² ≤ 20 ≤ 20 ≤ 20 ≤ 20
Edging cohesion EN 14323 mm ≤ 10 ≤ 10 ≤ 10 ≤ 10
Resistance to cracking EN 14323 Class (a) 3 3 3 3
Abrasion resistance (initial point) No. of revolutions
- Plain colours EN 14323 ≥ 150 ≥ 150 ≥150 ≥150- Printed < 50 < 50 < 50 < 50
Scratch resistance EN 14323 N ≥ 1.5 ≥ 1.5 ≥ 1.5 ≥ 1.5
Stain Resistance EN 14323 Class (a) 3 3 3 3
Colour fastness under artificial light EN 14323 Grayscale 4 to 5 4 to 5 4 to 5 4 to 5
Fire ratingNFP 92501 M Classification 12 to 19 mm: M2 - - -
EN 13501-1 Euroclass > 9 mm: D-s2,d0 B-s2,d0 D-s2,d0 D-s2,d0
Calorific value kcal/kg 4000 4000 4000 4000
Type P2 : Panels for dry interior design applications Type P3 : Panels for wet interior design applications
(a) Class : 1= Surface damage. 2 = Severe appearance alteration. 3 = Moderate change. 4 = Slight change visible from certain angles. 5 = No change.
Melamine Faced Board