www.polyrey.com

Technical Data

EN

© C

opyr

ight

201

3, P

olyr

ey. A

ll rig

hts

rese

rved

. Sub

ject

to c

hang

e, p

leas

e co

ntac

t us.

PANOPREY® Melamine Faced Board

Applications

1 2

1/2

Properties

Product Offer

CORE Chipboard MDF

SIZE 280 × 207 cm

FINISH FA - BRI - EXM - GRAIN - EPM - LEG

GRADE

Standard 8 - 12 - 16 - 19 - 25 -30 mm 12 - 16 - 19 mm

Moisture resistant 19 mm -

Fire retardant 12 - 16 - 19 mm -

1/ Decorative paper on both sides impregnated with melamine resin.

2/ Chipboard or MDF core.

ÉPIMAT (EPM): not available in Panoprey 8 mm - Panoprey BRI: only available in 19 mm, standard grade.

• Economical decorative panel ready to use.

• Good scratch resistance and cleanability.

• Aesthetic quality (edging, surface appearance) and MDF strength.

• Decorative on both sides.

• Food safe (IANESCO approved).

• Suitable for vertical use (partitions) and moderate horizontal use (furniture) in low-traffic environments.

• Available in moisture resistant grade for humid environments.

• Panoprey /Polyrey HPL/Compact Reysipur/Polyprey complementary products for harmonious interior design applications:

156 decors available in Panoprey, which can be coordinated with HPL sizes 307×124 or 307×132 cm.

72 decors available in HPL door size 215×97 cm and 245×124 cm.

Matching melamine and ABS edgings for a perfect finish (available from our partners, please contact us).

crackresistant

scratchresistant

ease of maintenance

resistant to chemical and household products

hygienicsurface

colour fastness under artificial light

www.polyrey.com

Technical Data

EN

© C

opyr

ight

201

3, P

olyr

ey. A

ll rig

hts

rese

rved

. Sub

ject

to c

hang

e, p

leas

e co

ntac

t us.

PANOPREY®

2/2

Food safe EN 13130-1 Yes Yes Yes Yes

Formaldehyde emission EN 717-2 Class E1 E1 E1 E1

Volatile organic compounds (VOC) emission ISO 16000-9 Class A A A A

CORE Standardgrade chipboard

Fire retardant grade chipboard

Moisture resistant grade chipboard

Standard grade MDF

DECOR / FINISH All decors / Finishes

THICKNESS 8-12-16-19-25-30 mm 12-16-19 mm 19 mm 12-16-19 mm

Conforms EN 14322 CLASSIFICATION EN 312 Type P2 EN 312 Type P2 EN 312 Type P3 EN 622-5

CHARACTERISTICS STANDARD UNITS

Physical and dimensional properties

Mechanical properties

Surface properties

Fire performance

Health and environmental characteristics

Density EN 323 kg/m3 650 ± 10 % 700 ± 10 % 670 ± 10 % 760 ± 10 %

Moisture content (ex-factory) EN 322 % 5 to 13 5 to 13 5 to 13 4 to 11

Thickness tolerance EN 14323 mm ± 0.3 ± 0.3 ± 0.3 ± 0.3

Length and width tolerance EN 14323 mm ± 5 ± 5 ± 5 ± 5

Straightness tolerance EN 324-1 & 2 mm/m ≤ 1.5 ≤ 1.5 ≤ 1.5 ≤ 1.5

Squareness tolerance EN 324-1 & 2 mm/m ≤ 2 ≤ 2 ≤ 2 ≤ 2

Flatness tolerance (thickness ≥ 16 mm) EN 14323 mm/m ≤ 2 ≤ 2 ≤ 2 ≤ 2

Impact resistance to a 324 g ball(drop height for ≤ 10mm diameter imprint)

EN 14323 mm ≥ 500 ≥ 500 ≥ 500 ≥ 500

Surface cohesion EN 311 MPa ≥ 1.0 ≥ 1.0 ≥ 1.0 ≥ 1.0

Bending strength EN 310 N/mm²8-12-16-19 mm: 1125 mm: 10.530 mm: 9.5

12-16-19 mm: 11 19 mm: 1412 mm: 2216-19 mm: 20

Modulus of elasticity EN 310 N/mm²

8-12 mm: 180016-19 mm: 160025 mm: 150030 mm:1350

12 mm: 180016-19 mm: 1600

19 mm: 195012 mm: 220016-19 mm: 2500

Internal cohesion EN 319 N/mm²

8-12 mm: 0.4016-19 mm: 0.3525 mm: 0.3030 mm: 0.25

8-12 mm: 0.4016-19 mm: 0.35

19 mm: 0.4512 mm: 0.6016-19 mm: 0.55

Thickness swelling after 24 h EN 317 % - - ≤ 14 -

Internal cohesion under cyclic test conditions EN 321 N/mm² - - 0.13 -

Thickness swelling under cyclic test conditions EN 321 % - - ≤ 13 -

Surface defects

- Spots EN 14323 mm²/m² ≤ 2 ≤ 2 ≤ 2 ≤ 2- Linear mm/m² ≤ 20 ≤ 20 ≤ 20 ≤ 20

Edging cohesion EN 14323 mm ≤ 10 ≤ 10 ≤ 10 ≤ 10

Resistance to cracking EN 14323 Class (a) 3 3 3 3

Abrasion resistance (initial point) No. of revolutions

- Plain colours EN 14323 ≥ 150 ≥ 150 ≥150 ≥150- Printed < 50 < 50 < 50 < 50

Scratch resistance EN 14323 N ≥ 1.5 ≥ 1.5 ≥ 1.5 ≥ 1.5

Stain Resistance EN 14323 Class (a) 3 3 3 3

Colour fastness under artificial light EN 14323 Grayscale 4 to 5 4 to 5 4 to 5 4 to 5

Fire ratingNFP 92501 M Classification 12 to 19 mm: M2 - - -

EN 13501-1 Euroclass > 9 mm: D-s2,d0 B-s2,d0 D-s2,d0 D-s2,d0

Calorific value kcal/kg 4000 4000 4000 4000

Type P2 : Panels for dry interior design applications Type P3 : Panels for wet interior design applications

(a) Class : 1= Surface damage. 2 = Severe appearance alteration. 3 = Moderate change. 4 = Slight change visible from certain angles. 5 = No change.

Melamine Faced Board