Techstream Lite Kit Installation Instructions For Mongoose MFC
Transcript of Techstream Lite Kit Installation Instructions For Mongoose MFC
Techstream Lite Kit Installation Instructions
For Mongoose MFC
Table of Contents
Installing Mongoose MFC Software from Techinfo Website .............................. 2
Installing Techstream Software from Techinfo Website .................................... 4
Registering Techstream Software ..................................................................... 9
Selecting the Mongoose MFC VIM from Techstream ...................................... 12
Connecting to Vehicle to Verify Techstream Lite Operation ............................ 13
Techstream Lite Technical Support Information .............................................. 14
Page 1 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
Installing Mongoose MFC Software from Techinfo Website Required to proceed:
• PC with Windows XP, or 7 (32 or 64-bit), and Internet Explorer. Mongoose MFC does NOT support Windows 8. Please upgrade to MongoosePro MFC if you are using Windows 8. (procedure below is specific to Windows 7 32-bit PC and Mongoose MFC hardware)
• PC configured for access to the Internet
Perform the following: 1. Login to Techinfo.toyota.com
2. Click on TIS-> Diagnostics-> ScanTool-> 32-bit Mongoose Software Installer v01.02.07 Note: At the time this document is written, the latest software version available is v 01.02.07. You may see an updated version listed.
Page 2
https://techinfo.toyota.com TS Lite STANDARD Kit Installation Instructions – Rev 1.1
3. Click on Run to begin the installation.
4. Setup screen appears as shown below. Click on “I accept the terms in the License Agreement” then click on Install.
5. During the installation, you will be notified to attach the Mongoose MFC device to the Computer after the installation is complete. Click on OK.
Page 3 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
6. Once the software installation is complete, click on Finish.
7. Connect the Mongoose MFC VIM to the PC via USB port. The Mongoose MFC driver will be installed automatically. After a few minutes, confirm the green LED light in the OBD-II end of the cable is flashing. This indicates the driver is installed and Mongoose VIM is ready to be used.
Installing Techstream Software from Techinfo Website Perform the following:
1. Login to Techinfo.toyota.com
Page 4 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
2. Click on TIS -> Diagnostics -> ScanTool -> Techstream v4.21.002 Full Software
Installer Note: At the time this document is written, the latest software version available is v4.21.002. You may see an updated version listed.
3. Click on Run and wait until the download is completed
Page 5 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
4. Click on Run to begin the installation
5. Select a Language, English is selected by default. Click on Next to continue
6. Click on Next again to continue
Page 6
https://techinfo.toyota.com TS Lite STANDARD Kit Installation Instructions – Rev 1.1
7. Accept the License Agreement terms and click on Next
8. Enter Your name and Company name, and click on Next
9. Click on Install to begin the installation of the Techstream software
Page 7 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
10. Click on Finish to complete the installation
Configuring Techstream Software for Your PC Perform the following:
1. From your Windows Desktop, double click on the Techstream icon
2. Select North America and click on Next
Page 8
https://techinfo.toyota.com TS Lite STANDARD Kit Installation Instructions – Rev 1.1
3. Select a Language from the Drop-down option, default is English, and click on Next
4. Enter the required information as shown below and click on OK
Registering Techstream Software Techstream Software requires registration with the TIS site before it can connect to a vehicle. Techstream registration is limited to only one PC per TIS subscription. The Techstream registration will be good for the duration of the TIS subscription.
To Register perform the following: 1. From Techstream main screen, click on Software Registration
Page 9 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
2. Click on Software Registration button
3. Login to techinfo.toyota.com website
4. Enter a Computer Name and a Shop/Owner Name and then click on Calculate Key
Page 10 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
5. Copy the Key from Techinfo website
6. Return to Techstream Registration screen and paste the Key in the New Key: box then click on OK to register.
The Registration screen is now closed and Techstream software is registered
Page 11 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
Selecting the Mongoose MFC VIM from Techstream Techstream software requires a VIM selection before you can use the Mongoose MFC VIM. To Select the Mongoose MFC VIM, follow the steps below:
Perform the following: 1. Select Setup from Techstream Main Menu screen 2. Select VIM Select from the Setup drop down menu 3. Click the drop-down arrow 4. Select Mongoose MFC from the Interface Setup drop down list 5. Click OK
Note: Mongoose MFC Software and Driver must be installed before Mongoose MFC selection will be available.
Page 12 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
Connecting to Vehicle to Verify Techstream Lite Operation Perform the following:
1. Connect Mongoose MFC device to PC via USB port. 2. Connect Mongoose MFC device to vehicle’s OBD-II port. 3. From Techstream main screen, click on Connect to Vehicle
4. Vehicle information should be populated as the example shown below. Select the appropriate vehicle Option: and click on Next.
Page 13 https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1