Technical presentation- Anti-lock braking system
-
Upload
faizzaty-md-shiri -
Category
Engineering
-
view
265 -
download
9
description
Transcript of Technical presentation- Anti-lock braking system
ANTI-LOCK BRACKING SYSTEM SYSTEM
FAIZZATY BINTI MD SHIRI14235MECHANICAL ENGINEERING FINAL YEAR 1ST SEM
OUTLINEThe ABS Principal
ABS Types
How ABS Works?
Comparison
Advantages
The ABS Principal
Wheel lockup
Skidding
Loss of traction
& vehicle control
Reduce steering ability
Slides out of control
With ABS system, the driver can brake hard, take the evasive action and still be in control of the vehicle in any road condition at any speed and under any load
Types of ABSFour channel- The best scheme- Provide greater safety- Most modern cars use this type
Three channel- Individual control of front wheels- The rear wheels are monitored together- Found on pick up trucks
ABS ComponentsAn ABS consists of the following components:
• Wheel speed sensors• Brake calipers• Hydraulic motor• Pressure release valves• Control module
Brake caliper
Wheel speed sensor
How ABS Work?
ABS control module
Sensor
Brake pipe
Hydraulicmotor
COMPARISON
Advantages
Maintain directional stability
Control over steering during brakingSafe & Effective
Brake fluid pressure change automatically
From statistics approximately 40% of automobile accidents are due to skidding
Cars with ABS are up to 65% more likely to be in fatal crashes than cars without ABS
ABS is a live saving technology which allows steering while braking heavily
CONCLUSION
Q & ASESSION