Technical Bulletin - BEKA Schréder Foundations.pdf · This Technical Bulletin shall assist our...
6
CO Th fou Th M Ty B 01 C M B dr Ple ad W rec co Joh ON his T und • • • • he c • • • • • Mou ype BEKA 11 Conc Max Bend raw eas djus We w com ond han NCR Tec dat • • • • calc W A P D D unti e of A dr cret x So ding wing se n sted wish mm ditio nn RET chn tion 6m 8m 10 12 cula Win A sa Pol Des Des ing f Ba raw te B oil Pr g Sc g: note d to h to men ons Sch TE nica ns f m M m M 0m 2m atio nd afe le e sign sign Hei ase P wing Base ress che e th o th o st nd t s on hler FO al Bu for Mou Mou Mo Mo ons spe ety equ ned ns a ight Plat g No e di sur edul hat he c tate tha n sit ritz OUN ulle GR unt unt oun oun s ar eed fac uipp d fo are ts te, o: P ime re le o t th calc e to at fi te. zko ND etin RP o ting ting ntin ntin e b d of ctor ped or M e ba as p PDP ensi on he b cul o ou inal DAT n sh or s g He g He ng H ng H base f 40 r of d wi Max ased per P-00 ions bolt late ur c l ca TIO hall stee eig eig Hei Hei ed o 0m/ f 1.5 ith xim d o r 03- s t le ed c clie alcu ON l as el p ght ght ight ight on /s f 5 a tw mum on lo engt con ents ulat NS ssis pole t t the for agai wo lu m So oca m m k ths ncre s th tion st ou es o e fo Cla inst um oil atio m mm kPa s on ete hat ns, ur c of t ollo ass t ov mina Pre ons n dr e ba the bas cus the owi B T ver aire essu s of 85 P0 S raw ase ese sed stom fol ing Ter rtur es, h ure 30 50*8 0001 S-FO wing dim e ca d on me llow de rrain rnin hav es, a 00m 6 F2 850 58 1/JS OOT g PD men alcu n th ers t win esig n C ng w ving as i m ab 0*8 8 S01 OT01 PDP nsi ulat he a to m ng le n c Cate was g a ind bov 850 1/B 1 P-00 ons tion act ma eng crite ego s ap co dica ve s P 03-0 s. ns s tual ake gth eria ory ppl omb ated sea 900 P00 S 011 sha l so the hs: a: 2 lied bine d o a lev F 0*9 8 001 S-FO 1 ar all b oil c T e ri d. ed on th vel 8 F2 900* 86 1/JS OOT re f be u con Te ight lum he l. *90 S01/ T02 for use ndit ec t de min tab 00 /B ind ed a tion ch ecis nair ble 1 P dica as g ns h hn sion re w be 100 P000 S-F atio guid hav ni ns f wind elow 1 F 00* 10 10 01/ FOO on o des ve t ic for nd s w. 10 F2 *100 000 08 /JS0 OT0 onl s on to b ca r th urf 00* 01/B 03 ly a nly be d al he c face * B and and don B cons e ar 1 P0 d sh d w ne f Bu stru rea 1150 1 000 S-F hall we for ull uct a of 12 F3 0*1 115 98 01/J FOO be the let tion f 0.4 2 3 1150 50 8 JS01 OT04 e tin n of 4 m 0* 1/B 4 n f m 2 . B
Transcript of Technical Bulletin - BEKA Schréder Foundations.pdf · This Technical Bulletin shall assist our...
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
The calculation
Mounting Heights
Type of Base Plate, as per
BEKA drawing No: PDP
011
Concrete Base dimensions
Max Soil Pressure
Bending Schedule on
drawing:
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that fi
conditions
Johann Schleritzko
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
•
•
•
•
The calculation
•
•
•
•
•
Mounting Heights
Type of Base Plate, as per
BEKA drawing No: PDP
011
Concrete Base dimensions
Max Soil Pressure
Bending Schedule on
drawing:
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that fi
conditions
Johann Schleritzko
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
•
•
•
•
The calculation
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Mounting Heights
Type of Base Plate, as per
BEKA drawing No: PDP
Concrete Base dimensions
Max Soil Pressure
Bending Schedule on
drawing:
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that fi
conditions
Johann Schleritzko
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
10m
12m Mounting Height
The calculation
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Mounting Heights
Type of Base Plate, as per
BEKA drawing No: PDP
Concrete Base dimensions
Max Soil Pressure
Bending Schedule on
drawing:
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that fi
conditions
Johann Schleritzko
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
10m
12m Mounting Height
The calculation
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Mounting Heights
Type of Base Plate, as per
BEKA drawing No: PDP
Concrete Base dimensions
Max Soil Pressure
Bending Schedule on
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that fi
conditions on site.
Johann Schleritzko
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
10m Mounting Height
12m Mounting Height
The calculations are
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Mounting Heights
Type of Base Plate, as per
BEKA drawing No: PDP
Concrete Base dimensions
Max Soil Pressure
Bending Schedule on
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that fi
on site.
Johann Schleritzko
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
Mounting Height
12m Mounting Height
s are
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Mounting Heights
Type of Base Plate, as per
BEKA drawing No: PDP
Concrete Base dimensions
Max Soil Pressure
Bending Schedule on
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that fi
on site.
Johann Schleritzko
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
Mounting Height
12m Mounting Height
s are based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Type of Base Plate, as per
BEKA drawing No: PDP
Concrete Base dimensions
Bending Schedule on
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
recommend that final calculations
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
Mounting Height
12m Mounting Height
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Type of Base Plate, as per
BEKA drawing No: PDP-003
Concrete Base dimensions
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
nal calculations
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
Mounting Height
12m Mounting Height
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on
Type of Base Plate, as per
003-
Concrete Base dimensions
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
nal calculations
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
6m Mounting Height
8m Mounting Height
Mounting Height
12m Mounting Height
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
Designs are based on locations of 300m above sea level.
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
nal calculations
CONCRETE FOUNDATIONS
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
Mounting Height
12m Mounting Height
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
m
mm
kPa
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
nal calculations
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
m
mm
kPa
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
nal calculations, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
850*850*850
P0001/JS01/B
S
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
850*850*850
P0001/JS01/B
S-FOOT01
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
6
F2
850*850*850
58
P0001/JS01/B
FOOT01
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
850*850*850
58
P0001/JS01/B
FOOT01
Please note that the bolt lengths on drawing PDP
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
850*850*850
P0001/JS01/B
FOOT01
Please note that the bolt lengths on drawing PDP-003
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
P0001/JS01/B
003-011 are for indication only and shall be
adjusted to the calculated concrete base dimensions.
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combin
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
900*900*900
P0001/JS01/B
S
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
foundations for GRP or steel poles of the following lengths:
based on the following design criteria:
Wind speed of 40m/s for Class B Terrain Category 2
A safety factor of 1.5 against overturning was applied.
Pole equipped with two luminaires, having a combined luminaire wind surface area of 0.4 m
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
F2
900*900*900
86
P0001/JS01/B
S-FOOT02
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
A safety factor of 1.5 against overturning was applied.
ed luminaire wind surface area of 0.4 m
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
8
F2
900*900*900
86
P0001/JS01/B
FOOT02
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
Designed for Maximum Soil Pressures, as indicated on the table
locations of 300m above sea level.
900*900*900
P0001/JS01/B
FOOT02
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
Designed for Maximum Soil Pressures, as indicated on the table
900*900*900
P0001/JS01/B
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
Designed for Maximum Soil Pressures, as indicated on the table
1000*1000*
P0001/JS01/B
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
, based on the actual soil conditions have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
below
1000*1000*
P0001/JS01/B
S-FOOT03
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
below
10
F2
1000*1000*
1000
108
P0001/JS01/B
FOOT03
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
below.
10
F2
1000*1000*
1000
108
P0001/JS01/B
FOOT03
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
1000*1000*
P0001/JS01/B
FOOT03
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
1000*1000*
P0001/JS01/B
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
1150*1150*
P0001/JS01/B
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
1150*1150*
1150
P0001/JS01/B
S-FOOT04
011 are for indication only and shall be
We wish to state to our clients that these calculations shall be used as guides only and we
have to be done for
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
12
F3
1150*1150*
1150
98
P0001/JS01/B
FOOT04
011 are for indication only and shall be
have to be done for the
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
12
F3
1150*1150*
1150
98
P0001/JS01/B
FOOT04
011 are for indication only and shall be
the
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m
1150*1150*
P0001/JS01/B
FOOT04
Technical Bulletin
This Technical Bulletin shall assist our customers to make the right decisions for the construction of
ed luminaire wind surface area of 0.4 m2.
P0001/JS01/B
