ALLOY FOIL

WHITE & BLUE EDITION

The R&D Zeeko department designed a brand new foil in the 2016 range : an alloy foil with the best quality/price ratio.

After winning all the magazine tests in 2015, the new 2016 Alloy Hydrofoil pushes the limit of the quality and the rigidity.

The front and back wings of the alloy foil are made with a new Pre-Preg technology using the molds of the Carbon Series wings.

The performance of the white and blue edition hydrofoil is at the highest lever for an alloy hydrofoil.

The alloy foil is fully removable, comes with carry strengthened case, protecting each element of the foil, allowing easy

storage and transport.

What's new in 2016:

- New Design of the fuselage

connection to the wings and the

mast. Thanks to a new technology of CNC, It o

at low speed.

The fuselage is even easier to be assembled, the 2 plastics connectors to the wings are deleted.

Also the fuselage is made with a new aluminium alloy which gives more rigidity, then more control at high speed and

during turns.

- New plate

The Foil is suitable to all board of the market with inserts and rails.

Also the plate is made with a new aluminium alloy which gives more rigidity to the plate, then more control at high

speed and during turns.

- New wings

PERFORMANCES

The alloy foil has a very good speed potential, thanks to its stability.

Highly scalable, you will learn the foil and improve without being limited by its performance.

ACCESSIBILITY & freeride / Ideal for beginners

Here are the advantages of using alloy foil instead of a carbon foil, in order to learn how to control a foil :

-

- The yaw e ect is less felt = you get more control

(To illustrate the yaw e

point the front wing)

- The speed is more controllable.

- The price among the lowest in the market without losing quality, is a decisive argument for novices.

The anhedral front wing increases the control at high speed and during turns specially compare to the black and white hydrofoil

Edition.

The front wing is design with an anhedral curve giving more control at high speed. Wings are made using a new process

of molding using Pre preg !berglass.

ZEEK

O K

ITES

Foil m

aker

since

201

0

R&D since

200

8

MAST & FUSELAGE :

CONSTRUCTION

High quality alloy. Rigidity and corrosion resistance.

The two parts are anodized and painted, o ering double protection.

DIMENSIONS Length 90 cm Thickness 15 mm

CONNECTION MAST / BOARD

Plate

FRONT & BACK WINGS :

The shape of these two wings allows the supports are balanced between the front and back leg, and that

whatever the speed.

CONSTRUCTION

VERTICAL BACK FIN :

ect. The distance between the screws is the same

as on twin tip boards.

ideal for use in the waves

CONSTRUCTION

100% G10: durability and rigidity

SALT WATER & ALLOY

The aluminum parts are anodized and painted, o ering double protection. The

aluminum used is the most resistant to salt water.

It is recommended to use the T gel for the screws, supplied when buying.

ZEEK

O K

ITES

Foil m

aker

since

201

0

R&D since

200

8

Wings are made using a new process of molding using Pre preg !berglass.

ZEEK

O

Foil m

akR&

T H E I D E A L B O A R D S F O R T H E Z E E K O A L L O Y F O I L

P O C K E T B O A R D

Foil Board

155 x 46 x 2,5 cm

S L A S H B O A R D

Surf & Foil Board

ZEEK

O K

ITES

Foil m

aker

since

201

0

R&D since

200

8

E E T T B B O O A A

Foil Boaoaoarrrd d d d d

x 46 x 2,5 c

P P P P P P O O O O O O C C K K

Fo

15151515155 5 5 x

A A R R D D D D

cm

M8 X3

60mm

M8 X2

60mmM6 X 3

20mm

M5 X2

40mm

85mm/90mm

160mm/165mm

370mm

175mm

175mm