TD-40ECRAWLER DOZER

Net Horsepower 384 kW (515 hp)

Operating Weight 61920 kg (136,509 lb)

Blade Capacity up to 39.8 m3 (52 yd3)

Exclusive suspension design provides maximum durability while giving the operator a smoother, stable ride

Comfortable, sealedand sound suppressed cab equipped with:– air recirculation system– air conditioner/heater– deluxe air suspension seat swivels 14 degrees right– ergonomically designed joysticks

for superb motion and blade control

A system of preset travelspeed selection and automaticdownshift function provideshigh productivity

Modular power train,easily accesible diagnosticcheck ports, filters and sight gauges for increased serviceability

Arctic and hot climate, hot slag and coal handling dozer applications, are designed for increased crawler dozer versatility

384 kW (515 hp) Cummins QSK19 enginemeets EU Stage IIIA and EPA Tier 3

emission standards

Louvered, two-piece and hingedradiator guard doors

Multi-unit modular cooling systemwith hydraulically driven, 2-speed fan

improves cooling efficiency

Large capacity blades with full width wear linerand double tilt/pitch system,

for all types of dozing operations

Exclusive suspension design provides maximum durability while giving the operator a smoother, stable ride

Exclusive two-speed geared steering systemoffers superior traction, steering control,

and 6 speeds fwd and rev

Sloped and tapered enginehood provides excellent

visibility to the blade equipment

Widetrackgaugeforgoodsideslopestability

andincreasedcoolingairfIowarea

Superiorsteering

performance

with2-speedgeared

steeringsystem

Advancedelectro-hydraulic

motioncontrolsystem

Moredirectbladeliftforce

withfrontlocatedliftcylinders

Largecapacitybladestopushlargeloads

Frontandrearlightsforimprovednight-timeoperation

Modular Power Train enables easy and efficient removal and replacement of major components: engine, torque converter, powershift transmission, steering drive and final drives with minimum downtime without disturbing other components.

Modular Power Train Exclusive Undercarriage

Simple, rugged, interlocking track guides

Resilient equalizer bar end cushioned

rebound brackets

Standard sprocket rock guards

and dirt defIector

Simple, single tooth Split Master Link

The Tier 3 approved Cummins QSK19

engine with state-of-the-art electronic

controls and modular common-rail

fuel system ensures clean, efficient

performance, minimum maintenance

and superior uptime.

Multi-unit modular cooling package

with hydraulically driven, 2-speed fan

improves cooling efficiency.

Large blades with full width wear liner, have been designed for increased capacity, and abrasion resistant cutting edge and end bits are used for prolonged durability.Blades may be equipped with hydraulic blade tilt or tilt/pitch to increase the versatility of the dozer.

Large blades

The speed ranges, machine direction changes and steering modes are controlled by the left hand joystick.Buttons control transmission gear selection, while rocker switches select high and/or low steering ranges.

Shift preset function reduces gear shifting frequency and auto-downshift function provides high productivity w/o manual downshifting.

Advanced Motion Control

ENGINE *Makeandmodel................................................ CumminsQSK19 Type..................................................................... In-line,6-cylinder Aspiration................................................. TurbochargedandCAC Fuelsystem......................................................... HPCRElectronic GrossHorsepower,SAEJ1995...........................418kW(560hp) **NetFlywheelpower,SAEJ1349/ISO9249..........384kW(515hp) Ratedrpm....................................................................... 2000rpm Max.torque@1500rpm............................. 2379Nm(1,755lb.ft) Displacement.......................................................... 19l(1,150in3) BorexStroke................................... 159x159mm(6.25”x6.25”) Lubrication,fullflowfiltering........................................fullpressure Aircleaner....................... drytypewithexhaustaspiratedprimary andsafetyelementsandserviceindicator

* MeetsEUStageIIIAandEPATier3emissionregulations ** NetHorsepowerattheminimumspeedofhydraulicfan415kW(555hp)

TRANSMISSION & TORQUE CONVERTERModular,countershafttypepowershift,electro-hydrauliccontrol.Presettravelspeedselectionandauto-downshift.

Singlestage432mm(17”)torqueconverterwitha2.3:1stallratiodrivestotransmissionthroughadoubleuniversaljoint.

TRAVEL SPEEDSGear Range Forward Reverse km/h (mph) km/h (mph)

1st Low 3.2 (2.0) 4.1 (2.5) High 4.1 (2.5) 5.2 (3.2)

2nd Low 5.2 (3.2) 6.5 (4.0) High 6.7 (4.2) 8.4 (5.2)

3rd Low 9.4 (5.8) 11.7 (7.3) High 12.0 (7.5) 14.9 (9.3)

STEERING & BRAKINGTwospeedgearedsteeringmoduleprovidesgradualturnswhilemaintainingfullpowertobothtracksplusconventionalclutch-brakeperformancefortightorpivotturns.Thistypeofsteeringsystemofferssuperiortractioninalltypesofoperationsandterrain.

Coupledto3–speedtransmission,the2–speedsteeringprovides6speedsforwardand6reverse.Thelefthandjoystickcontrolstransmissionandsteeringdriveforupanddownshifting,steering,Hi/LoselectionandLH/RHgradualgearedturn.

Footpedalappliesbothbrakesforparkinganddownhillcontrol.Brakesarespringappliedandhydraulicallyreleased.

REFILL CAPACITIES Liter (USgal)Fueltank 1362 (360)Coolingsystem 74 (19.6)Crankcasew/filters 68.8 (18.2)Transmissionsystem 270 (71)Finaldrive,eachside 85 (22.5)Hydraulicreservoir 169 (45)

OPERATING WEIGHT Includesstdandardequipment

andSemi-Ublade.................................... 61920kg(136,509lb)

FINAL DRIVESDouble-reductionmodulartype,withsplash,lubricatedpinionandbullgearinitialstageandoutboardplanetarytypefinalstage.Fullymachinedbolt-onring-typesprocketrimisreplaceablewithoutremovingthetrackframe.

TRACK FRAMEAll-weldedboxsectiontypetrackframesoscillateonpivotshaftsmountedforwardandisolatedfromfinaldrives.Aspecialforwardtrackguidingsystemjoinseachofthetwotrackframestothetractorchassis.Thehelicalspringfrontidlerrecoilsystemabsorbsshocksandlimitstracktension.Drumtypefrontidlershavesteelbackedbronzebushings.

Trackrollers,eachside................................................................ 7 Topidlers,eachside.................................................................... 2 Allrollersandidlers...........................................lifespanlubricated Oscillationatcenteroffrontidler......................... 392mm(15.4”).

TRACKSLubricatedTrackSystem(LTS)virtuallyeliminatesinternalpinandbushingwearthroughuseofapatentedsealassembly.Thesplitmasterlinkreduceschainremovalandinstallationtime.

Trackshoewidth,standard...................................... 610mm(24”) Struttedtracklinkpitch............................................ 280mm(11”) Trackshoes,eachside.............................................................. 39 Groundcontactareawithstd.shoes...................4.4m2(6816in2) Groundpressure................................................ 137.9kPa(20psi) Heightofgrouser..................................................... 93mm(3.66”) Trackadjustment......................................................... fullhydraulic Groundclearance.................................................. 600mm(23.7”) Fixeddrawbar-approx.heightfromground tocenterlineof4.33”(110mm)clevis............... 782mm(30.8”)

BLADESELECTION SEMI-U FULL-U COALBlade

Length, with blade and drawbar 7.93 m (26’) 8.24 m (27’) 8.57 m (28’1”)

Length with blade and single shank ripper 10.35 m (34’) 10.66 m (35’) 11.0 m (36’1”)

Length with blade and multi-shank ripper 9.76 m (32’) 10.12 m (33’2”) 10.4 m (34’1”)

Width over trunnions 3.73 m (12’3”) 3.73 m (12’3”) 3.73 m (12’3”)

Length with ripper onlySingle Shank

8.51 m (27’11”)Multi Shank

7.95 m (26’) –

OVERALL DIMENSIONS WITH EQUIPMENT

E

D

C

A*4.4

1 m

(14

’ 6”

)

*4.2

2 m

(13

’ 10

”)

*4.0

6 m

(13

’ 4”

)

3.61 m (11’ 10”)

5.75 m (18’ 10”)

B

2.50 m (8’ 2”)

3.11 m (10’2”)

TD-40E

*VERTICALDIMENSIONSINCLUDE93mm(3.66”)GROUSERHEIGHT

RIPPERSELECTION MULTI-SHANKSINGLESHANK

Standard DeepTool Beam Overall width

2880 mm (113.5”)

1670 mm (65.7”)

1670 mm (65.7”)

Cross section (width x height) 550x450 mm (21.7”x17.7”) 610x510 mm (24”x20”) 610x510 mm (24”x20”)

Ground clearance under tool beam: – ripper raised – ripper lowered

2090 mm (82.3”) 350 mm (13.8”)

1950 mm (76.8”) 250 mm (9.8”)

1950 mm (76.8”) 250 mm (9.8”)

Shank Number of shanks per ripper. max

3

1

1

Spacing center-to-center 1190 mm (47”) – –

Penetration max. 1000 mm (39”) 1290 mm (51”) 1670 mm (66”)

Ground clearance, max. raised 950 mm (37”) 1000 mm (39”) 720 mm (28”)

Shank positions (vertical) 2 4 4

Weight Complete, including one shank

7588 kg (16,729 lb)

8356 kg (18,422 lb)

8461 kg (18,653 lb)

Each additional shank 570 kg (1,260 lb) – –

Penetration force 205 kN (46,084 lb) 200 kN (44,960 lb) 200 kN (44,960 lb)

Pryout force 622.5 kN (139,938 lb) 612 kN (137,578 lb) 612 kN (137,578 lb)

RIPPER SPECIFICATIONS

BLADESELECTION SEMI-U FULL-U COALBlade

Blade capacity, SAE J1265 18.6 m3 (24.3 yd3) 22.8 m3 (29.8 yd3) 39.8 m3 ( 52 yd3)

Blade dimensions:– width over end bits – height, struts centered A

4.81 m (15’9”) 2.23 m (7’4”)

5.18 m (17’) 2.26 m (7’5”)

6.85 m (22’6”) 2.50 m (8’2”)

Max. lift B 1.53 m (60.2”) 1.53 m (60.2”) 1.46 m (57.5”)

Max. drop below ground level C 830 mm (32.7”) 830 mm (32.7”) 875 mm (34.4”)

Max. tilt adjustment D 1150 mm (45.3”) 1250 mm (49.2”) 1650 mm (65”)

Max. pitch adjustment E 10° 10° 10°

Weight of blade with full width wear liner package 6770 kg (14,925 lb) 7458 kg (16,442 lb) 7820 kg (17,240 lb)

BLADE SPECIFICATIONS

TD-40ECRAWLER DOZER

©2008DresstaCo.Ltd.MS-4026-DSS3 July2008

STANDARD EQUIPMENT• Aircleaner,drytypewithexhaustaspirated

primary,safetyelementsandserviceindicator• Airconditioner/heater/pressurizer/defroster;

A/Ccondenser,behindroofmounted• Alarm,back-up• Alternator,80A• Antifreeze,-37ºC(-34ºF)• Batteries(4)12V,1920CCA,maintenancefree,

coldstart• Brakes,foot,springapplied,hydraulicallyreleased• Cabwith2postROPS,soundsuppression,

airrecirculationsystem,2F&2Rlights,4wipersw/washers,domelight,insidemirror(approvedaccordingtoROPS–SAEJ1040andFOPS–SAEJ231)

• Coolantfilterconditioner• Coolingmodule;includesradiator,transmissionoil

cooler,hydraulicoil/fandriveoilcooler,chargeaircooler;isolationmounted

• Cylinders,lift,withquickdropvalve• Decelerator–rightfootpedalandbrake–center

footpedal• Diagnosticcentersforpowertrainandequipment

hydraulicpressures• Drawbar,fixedcounterweight,2900kg(6400lbs)• Ecologicaldrainsforengineoil,radiatorcoolant

andhydraulicoil

• Enginehood,sloped,partiallyperforated• Enginesidedoors,partiallyperforated• Exhaust,resonatorwithelbow• Fan,hydraulicallydriven,suctiontype,2-speed• Filters,engineoil,fullflowandby-pass

withreplaceable,„spin-on”elements• Filters,powertrain,equipmenthydraulics,

„spin-on”microglasstype• Finaldrivesealguard• Fuelstrainer• Guards:crankcase(hinged)withfrontpullhook,

transmission,fan,radiatorandsprocketrockanddirtdeflector

• Horn,electric• Hydrauliccontrol,1valve,1leverwithpilot

operatedbladecontrol(lift)• Instruments: Gauges:fuellevel,enginecoolanttemperature,

engineoilpressure,transmissionoiltemperature, voltmeter,hourmeter,joystickcontroldisplay

Warninglights:aircleanerfilter,transmission oilfilter,hydraulicoilfilter,transmission/clutch oillowpressure,ECM–enginediagnostic

Audible&visualwarningsystem:lowengine coolantlevel,lowengineoilpressure

• Lightsw/guards,2F–liftcylindersmounted,2R–fueltankmounted

• Muffler,underenginehood,insulated• Radiatorguarddoors,louvered,two-piece,hinged• Rearoperatorplatform• Receptacle,charging• Seatbelt(SAEJ386)–3”wide,retractable• Seat,deluxe,airsuspensiontype,fabriccover,

adjustablewitharmrests,swivel14ºtoright• Starting,24V.• Steering,planetarytype,2-speed,lefthandsingle

levercontrol(joystick)• Toolscompartment• Torqueconverter,singlestage• Trackadjusters,hydraulic• Trackchainguides,integral• Trackchains,sealedandlubricated(LTS)

withsplitmasterlink,39links• Trackframe,7roller,2500mm(98”)gauge,

oscillatingtype,lifespanlubricatedrollersandidlers

• Trackshoes,610mm(24”)severeservice,grousertype

• Transmission,powershift,3speedsforward,3reverse,combinedwith2speedsteeringprovides6speedsforwardand6reverse;presettravelspeedselectionandauto-downshift

• Waterseparator,fuelsystem

OPTIONAL ATTACHMENTS• AirrecirculationsystemwithMSHAexternalfilter• AM/FMCDradio(forusewithcab)• BladeEquipment: –Semi-Uwithtiltortilt/pitch,18.6cu.m (24.3cu.yd),fullwidthwearlinerpackage –Full-Uwithtiltortilt/pitch,22.8cu.m (29.8cu.yd),fullwidthwearlinerpackage

–Coalbladewithtiltortilt/pitch,39.8cu.m (52cu.yd)• CanopyROPS/FOPS(SAEJ1040,J231)• Counterweight3945kg(8,690lbs),additionalrear

(4plates)• Fastfillsystem:fueltank,enginecrankcase,

powertrainoilreservoir,hydraulicoilreservoir

• Guards: –Crankcase,severeservice –Finaldrive,rock –Trackroller –Transmission,severeservice• Heater/pressurizer/defroster• Hydrauliccontrols,3-spoolvalve,2lever

(forusew/ripper)• Instrumentpanelguard

(forusew/canopyROPS/FOPS)• Lights,2additional,ROPSmounted• Mirrors,2pcsexterior(forusew/cab)• Operatorplatformcovers

(forusew/canopyROPS/FOPS)• Rippermulti-shankw/hydraulicpitch

–rippershankw/pin,max.3

• Ripper,singleshankw/hydraulicpitch–rippershank,standarddig–rippershank,deepdig–pinpuller,hydraulic

• Seat,airsuspension,vinylcover(forusew/CanopyROPS/FOPS)

• Soundsuppressionpackage• Startingaid,ether• Starting/chargingreceptacleplugassembly

with15ftcable• Tools–metric,inmetalbox• Tools–inches,inmetalbox• Trackshoes:

–660mm(26”)severeservice–800mm(31.5”)severeservice (notrecommendedtousewithripper)

• VandalismprotectionSpecificationssubjecttochangewithoutnotice.Ilustrationsandpicturesmayincludeoptionalattachmentsandaccessoriesandmaynotincludeallstandardequipment.

HYDRAULIC CONTROL SYSTEMDoublegearpump,drivenfromtorqueconverter.Output@2368rpmand17.0MPa(2,400psi): 1stpump................................................................................288l/min(76gpm) 2ndpump...............................................................................110l/min(29gpm)Reliefvalvesetting: bladelift&ripper................................................................. 17.0MPa(2,400psi) tilt......................................................................................... 18.4MPa(2,670psi)

Cylinders,boreandstroke: bladelift................................................................. 152.4x1760mm(6”x69.3”) tilt................................................................................ 254x175mm(10”x6.9”) tilt/pitch.........................................................220/254x175mm(8.6”/10”x6.9”)