TBA FIREFLY BAL-40 AS1530.8.1 FASCIA SYSTEM (STEEL FRAME)

INSTALLATION MANUAL

TBA FIREFLY

STEP 1: Lap the TBA Firefly EA Sarking over the top of the rafter end by 50mm and secure using 15mm long Button Head self-tapping screws onto the first truss. Then stretch taut and repeat the process onto all of the trusses.

STEP 2: Once the top lap has been secured, drag the Phoenix EA Sarking downwards and fold under the rafter end. Secure using the self-tapping Button Head Screws.

TBA FIREFLY

STEP 3: Secure a steel top hat over the top of the Phoenix EA Sarking to the roof manufactures standard specifications.

TBA FIREFLY

STEP 4: Install the rest of the top hats (battens) over the rest of the roof in accordance with the roof manufactures standard specifications.

STEP 5: Overlay the top hats and the TBA Firefly EA Sarking with ANY Highly Combustible sarking with a Flammability Index of 5 or less. Alternatively, if you wish to ensure full ember protection, fully sark with TBA Firefly Non-combustible Sarking.

TBA FIREFLY

STEP 6: Install a 19mm thick pine timber backing board with a minimum of 2 x 50mm long self-tapping screws into each rafter end.

STEP 7: Fold the steel fascia brackets to 90 degrees down the seam and screw into the pine backing board, spacing of brackets in accordance with the fascia manufacturers’ standard specification.

TBA FIREFLY

STEP 8: Hang the steel fascia.

STEP 9: Hang the guttering. TBA FIREFLY

STEP 10: Lay a 100mm wide strip of rockwool over the top of the sarking and top hat

STEP 10: Lay and secure the steel roof sheets over the top of the rockwool strips as you go to ensure that it doesn’t blow away or move.

TBA FIREFLY

STEP 11: When the steel roof sheeting is screwed into the top hat, the rockwool will compress up into the profile to create a complete seal to protect against both fire and embers.

STEP 12: Continue the same process around the whole perimeter of the roof. This detail applies for both fascia and barge ends

TBA FIREFLY

FULL REGULATORY COMPLIANCE WITH AS3959 Section 8: BAL-40 Fascia Element Tested to AS1530.8.1 Warringtonfire Report No: EWFA 42649200

TBA FIREFLY

OTHER FULLY TESTED AND BCA COMPLIANT PRODUCTS AND SYSTEMS

NON-COMBUSTIBLE SARKING * FLEXIBLE LIGHTWEIGHT BARRIERS * AS5113 FAÇADE SYSTEMS * COATED BATTS * LIGHTWEIGHT PARTY

WALL SYSTEMS * FIRE RATED SEALANTS * FIRE RATED MORTAR * WALL & FLOOR PENETRATION SEALS * FIRE COLLARS & WRAPS * TIMBER PENETRATION WRAPS * FLAME ZONE ROOF AND WALL SYSTEMS *

MARINE FIRE PROTECTION

TBA FIREFLY