Tape Measure - Building Strong...front. Construct the drawer box with 1 ¼-inch brad nails and wood...
8
Materials: • (4) ¾-inch Sheets of 4 x 8 Foot Plywood • (1) ¼-inch Sheet of 4 x 4 Foot Plywood • (4) 18-inch Metal Drawer Slides • (4) 2 ½-inch Locking Swivel Casters • (2) 2 ½-inch Swivel Casters • 1 ¼-inch Simpson Strong-Tie® Phillips Wafer-Head Screws • 2 ½-inch Simpson Strong-Tie® Stainless Steel Wood Screws • 1 ½-inch Simpson Strong-Tie® Hex-Head Strong-Drive SD Connector Screw • 1 ¼-inch Brad Nails • 1 inch Brad Nails or Staples • Shelf Pins (optional) • Wood Glue Tools: • Tape Measure
Transcript of Tape Measure - Building Strong...front. Construct the drawer box with 1 ¼-inch brad nails and wood...
Materials:
• (4)¾-inchSheetsof4x8FootPlywood• (1)¼-inchSheetof4x4FootPlywood• (4)18-inchMetalDrawerSlides• (4)2½-inchLockingSwivelCasters• (2)2½-inchSwivelCasters• 1¼-inchSimpsonStrong-Tie®PhillipsWafer-HeadScrews• 2½-inchSimpsonStrong-Tie®StainlessSteelWoodScrews• 1½-inchSimpsonStrong-Tie®Hex-HeadStrong-DriveSDConnectorScrew• 1¼-inchBradNails• 1inchBradNailsorStaples• ShelfPins(optional)• WoodGlue
Tools:
• TapeMeasure
Mobile Workbench with Drawers – Copyright © 2018 Jen Woodhouse | The House of Wood
2
www.JenWoodhouse.com
• Pencil• Carpenter’sSquare• TableSaworCircularSaw• CordlessDrill/Driver• Jigsaw• ShelfPinJig(optional)• BradNailer• Stapler(optional)• SafetyGlasses• HearingProtection• DustMask
CutList:
• (2)¾-inchplywood@50inchesx40inches(topandbottom)• (3)¾-inchplywood@40inchesx32½inches(sidesandmiddledivider)• (2)¾-inchplywood@32½inchesx237/8inches(centercarcasssupports)• (8)¾-inchplywood@237/8inchesx195/8inches(shelves)• (4)¾-inchplywood@227/8inchesx5½inches(drawerfaces)• (4)¾-inchplywood@213/8inchesx5½inches(drawerbacks)• (8)¾-inchplywood@18inchesx5½inches(drawersides)• (4)¼-inchplywood@227/8inchesx18¾inches(drawerbottoms)
Mobile Workbench with Drawers – Copyright © 2018 Jen Woodhouse | The House of Wood
3
www.JenWoodhouse.com
STEP1–BUILDTHECARCASSMeasure,mark,andcutbottom,sides,andmiddledividertosize.Applywoodgluetojointsandattachthesidesandmiddledividertothebottomwith2½-inchSimpsonStrong-Tie®StainlessSteelWoodScrews.
Mobile Workbench with Drawers – Copyright © 2018 Jen Woodhouse | The House of Wood
4
www.JenWoodhouse.com
STEP2–ATTACHTHECENTERCARCASSSUPPORTSMeasure,mark,andcutthecentercarcasssupportstosize.Measureandmarkthemidpointinthesidesanddividers,positionthecentercarcasssupportsinplace,andattachasshownwith2½-inchSimpsonStrong-Tie®StainlessSteelScrewsandwoodglue.Youmayneedtooffsetthetwopanelstoavoidpossiblehardwarecollisionatthemiddledivider.
Mobile Workbench with Drawers – Copyright © 2018 Jen Woodhouse | The House of Wood
5
www.JenWoodhouse.com
STEP3–ATTACHTOPMeasure,mark,andcuttoptosize.Attachtotheworkbenchwith1¼-inchSimpsonStrong-Tie®PhillipsWafer-HeadScrews.Donotaddgluehere,sothatyoucaneasilyreplacethetopwhenneeded.
Mobile Workbench with Drawers – Copyright © 2018 Jen Woodhouse | The House of Wood
6
www.JenWoodhouse.com
STEP4–INSTALLCASTERSInstallthecasterstotheundersideoftheworkbench.Noticethattheoutercastersarelocking,whereasthemiddlecastersarenot.Attachthecasterswith1½-inchSimpsonStrong-Tie®Hex-HeadStrongDriveSDConnectorScrews.You’llneedtoaddascrappieceof¾-inchplywoodtoeachcasterlocationsothatthescrewsdon’tcomethroughtheotherside.
Mobile Workbench with Drawers – Copyright © 2018 Jen Woodhouse | The House of Wood
7
www.JenWoodhouse.com
STEP5–ADDTHESHELVESIchosetomakemyshelvesadjustable,soIusedaShelfPinJig.Ifyou’dliketoattachtheshelvespermanently,simplymarktheirpositionsandattachwith1¼-inchSimpsonStrong-Tie®PhillipsWafer-HeadScrews.
Mobile Workbench with Drawers – Copyright © 2018 Jen Woodhouse | The House of Wood
8
www.JenWoodhouse.com
STEP6–BUILDTHEDRAWERSMeasure,mark,andcutdrawerpartstosize.Useajigsawtocutthecurvedcutoutonthedrawerfront.Constructthedrawerboxwith1¼-inchbradnailsandwoodglue.Attachthedrawerbottomwith1-inchbradnailsorstaplesandwoodglue.Installdrawerslidesaccordingtomanufacturer’sinstructions.
