tabo - 3d printed toilet paper · 6.05 hrs 1 pcs f 0.35 mm k 0.40 mm h 1 127.00 g d MK2/S Summary...
3
6.05 hrs 1 pcs f 0.35 mm k 0.40 mm h 1 127.00 g d MK2/S Summary People are hoarding and fighting over toilet paper at the moment and this design is a response to those who were asking about 3d printed toilet paper ;-) Most of the world's population manages without it and over in the Philippines this guy has plan: https://www.youtube.com/watch? v=Vzb98tQp53I If by some rare chance you have a 3d printer handy and you don't feel like venturing to the shops, you can now print one too! Household > Bathroom Geoff Williams tabo - 3d printed toilet paper VIEW IN BROWSER updated 21. 3. 2020 | published 21. 3. 2020
Transcript of tabo - 3d printed toilet paper · 6.05 hrs 1 pcs f 0.35 mm k 0.40 mm h 1 127.00 g d MK2/S Summary...
6.05 hrs
1 pcs
f
0.35 mm
k
0.40 mm
h
1
127.00 g
d
MK2/S
Summary
People are hoarding and fighting over toilet paper at the moment and thisdesign is a response to those who were asking about 3d printed toiletpaper ;-)
Most of the world's population manages without it and over in thePhilippines this guy has plan: https://www.youtube.com/watch?v=Vzb98tQp53I
If by some rare chance you have a 3d printer handy and you don't feel likeventuring to the shops, you can now print one too!
Household > Bathroom
Geoff Williams
tabo - 3d printedtoilet paper
VIEW IN BROWSER
updated 21. 3. 2020 | published 21. 3. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
5.0 MB
6.05 hrs f 0.35 mm k 0.40 mm h PLA 127.40 g d MK2/S
updated 21. 3. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
97.7 KBupdated 21. 3. 2020
57.0 KBupdated 21. 3. 2020
70.1 KBupdated 21. 3. 2020
Settings
Doesn't need to be pretty so suggest fast settings:20% infill.35mm layer height
Handle at top
Takes ~6hours/128g filament with these settingsApprox 33g wasted filament as supportHandle should be longer due to weight of water
Handle at bottom
Thanks to Zac Smith for this simple ideaTakes approx 3.5hrs/90g filament with these settingsHandle is slightly longer and thinner, no need for supports
• ◦ ◦
• • •
• • •
tabo-toilet-paper_035mm_pla_mk2s_6h3m.gcode
tabo-toilet-paper.stl
tinker.obj
tabo-toilet-paper-no-supports.stl
57.0 KBupdated 21. 3. 2020
License
This work is licensed under a Creative Commons (International License)
Public Domain
✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
tabo-toilet-paper-no-supports.obj
