Table of Contents · excellent grip and feel ... • A chin Strap extender is available for the...

Table of Contents TDS_69-0310 Protective Gloves ��1 TDS_69-0304N UTM Face Mask ��3 TDS_69-0304 UTM Face Mask ��5 TDS_69-0590N UTM Face Mask with Integrated Goggles - Gen 2 ��7 TDS_69-0590 UTM Face Mask with Integrated Goggles - Gen 2 ��9 TDS_69-GP-BLACK Groin Protector (No Leggings) �� 11 TDS_69-GP-BLACKN Groin Protector (No Leggings) �� 13 TDS_69-Leg-Black Leggings with Groin Protector �� 15 TDS_69-Helmet-Black �� 17 TDS_69-LEJKT-NV Law Enforcement Jacket Navy �� 19 TDS_69-RPJKT-TAN Role Player Jacket Tan �� 21

TECHNICAL DATA SHEETSUTM PPE TDS MASTER LIST i

Navigation: To jump directly to a specific TDS, click on the required page in the Table of Contents.

www�utmworldwide�com Sheet 1 of 2 VERSION 1.3 JULY 2018

TDS_69-0310 Protective Gloves

European Patent number: 1228342 additional patents pending� US patent numbers: 6253682, 6371028, 6427600, 6095051, 6378439,6422149,6415718, 6564719 UTM, Ultimate Training Munitions, and the “Breech” logo design are trademarks belonging to UTM Ltd�

Flexible Polymer Armour will not inhibit the natural movement of the hands, keeping hands unrestricted while protected from Non- Lethal Training Ammunition�•Trigger Finger is left unrestricted for precise trigger

control to deliver an accurate shot�

Armour

The UTM Protective Gloves was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force- on-Force training�•Velcro Wrist Adjustment�•Flexible Polymer Armour�•Unrestricted Trigger Finger�•Genuine Leather Palm with reinforced padding providing

excellent grip and feel�

Features

The UTM Protective Clothing have been rigorously tested in our testing facility�

Product Approvals

Designation: UTM Protective GlovesP/N: 69-0310-M, 69-0310-L, 69-0310-XLNSN (NATO): 8415-99-839-0140Sizes: M, L, XL�

Identifiers

TECHNICAL DATA & USAGE SHEETUTM PROTECTIVE GLOVES

1

Sheet 2 of 2www�utmworldwide�com

TDS_69-0310ProtectiveGloves

VERSION 1.3 JULY 2018

•Never remove gloves during training or in or near a training area�•Do Not use bleach, Do Not Dry Clean, Do Not Tumble Dry and Do

Not Iron the UTM Protective Gloves��

WARNINGS

•Intended only for supervised training conducted in accordance with UTM safety training protocols by law enforcement, military or professional training and security organizations�

•Verify that all PPE is correctly fitted, ensuring there are no exposed areas of the skin�•UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or any

of its products�

Usage Guidelines

The UTM Protective Gloves are intended to be issued as an item of Personal Protective Equipment (PPE)� The gloves should be cleaned and sanitized upon completion of training�•Do Not Machine Wash gloves� Wipe or spot clean excess wax with a damp cloth�•DO NOT use Detergents as it may damage the leather palms�•Inspect gloves for damage prior to any training exercises� If skin is exposed from damaged or ripped gloves, replace gloves immediately�

Care, Cleaning and Maintenance

TECHNICAL DATA & USAGE SHEETUTM PROTECTIVE GLOVES

2


TDS_69-0304N UTM Face Mask


The UTM Face Mask was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force- on- Force training� It was specifically created to work with Ballistic Helmets and allow for proper cheek/stock weld of shoulder fired weapons� The UTM Protective Face Mask offers face and throat protection that is light wearing, breathable, fully flexible and adaptable to all conditions and environments�•Light weight, allows full range of motion with excellent vision�•Breathable construction, unrestrictive airflow�•A chin Strap extender is available for the Ballistic Helmet for use with this mask�•Enables the user to obtain a full stock weld allowing the full use of iron or electronic sights on the weapon�•Full head protection is achieved when used with the required goggles and ballistic helmet (recommended helmet, US Army’s PASGT/ACH or MICH)�•Adequate space for radio equipment, ear and throat microphones�•Unrestrictive hearing�•Does not alter head and equipment spatial relationships in training unlike fully enclosed training helmets�

Features

Designation: UTM Face MaskP/N: 69-0304N Size: One-Size fits all�

Identifiers

TECHNICAL DATA & USAGE SHEETFACE MASK

3


TDS_69-0304N UTM Face Mask


•UTM approved eye protection (Goggles) must be worn in conjunction with the UTM Face Mask to achieve adequate personal protection for Force-on -Force Training Exercises conducted with UTM Man -Marker Rounds�

•Do Not use bleach, Do Not Dry Clean, Do Not Tumble Dry and Do Not Iron the UTM Face Mask�

WARNINGS


•Verify that all PPE is correctly fitted, ensuring there are no exposed areas of the skin�•UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or any of its products�

Usage Guidelines

The UTM Protective Face Mask is intended to be issued as an item of Personal Protective Equipment (PPE)� The Face Mask must be cleaned and sanitized upon completion of training�•The Face Mask cannot be properly sanitized by the use of the disinfectant wipes or sprays� The recommended cleaning method to

adequately sanitize the Face Mask is through washing with the use of domestic washing detergent�•Prior to washing, firmly close the mask’s velcro panels� Closing the velcro will prolong the life of both the mask and the velcro panels�•Wash the mask at 40°C/104°F (warm) with domestic washing detergent�•To prevent possible damage from incorrect heat settings it is recommended the mask is not tumble dried and that it be allowed to air- dry/

line- dry�



4


TDS_69-0304 UTM Face Mask


The UTM Face Mask was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force- on- Force training� It was specifically created to work with Ballistic Helmets and allow for proper cheek/stock weld of shoulder fired weapons� The UTM Protective Face Mask offers face and throat protection that is light wearing, breathable, fully flexible and adaptable to all conditions and environments�•Light weight, allows full range of motion with excellent vision�•Breathable construction, unrestrictive airflow�•A chin Strap extender is available for the Ballistic Helmet for use with this mask�•Enables the user to obtain a full stock weld allowing the full use of iron or electronic sights on the weapon�•Full head protection is achieved when used with the required goggles and ballistic helmet (recommended helmet, US Army’s PASGT/ACH or MICH)�•Adequate space for radio equipment, ear and throat microphones�•Unrestrictive hearing�•Does not alter head and equipment spatial relationships in training unlike fully enclosed training helmets�

Features

The UTM Face Mask has been approved by the U�S� Army Evaluation Centre to be used for force- on- force training when utilizing CCMCK (Close Combat Mission Capability Kit) ammunition�

Product Approvals

Designation: UTM Face MaskOrigin: United StatesP/N: 69-0304 NSN (NATO): 8415-99-359-9160Size: One-Size fits all�

Identifiers


5


TDS_69-0304 UTM Face Mask


•UTM approved eye protection (Goggles) must be worn in conjunction with the UTM Face Mask to achieve adequate personal protection for Force-on -Force Training Exercises conducted with UTM Man -Marker Rounds�

•Do Not use bleach, Do Not Dry Clean, Do Not Tumble Dry and Do Not Iron the UTM Face Mask�

WARNINGS



Usage Guidelines

The UTM Protective Face Mask is intended to be issued as an item of Personal Protective Equipment (PPE)� The Face Mask must be cleaned and sanitized upon completion of training�•The Face Mask cannot be properly sanitized by the use of the disinfectant wipes or sprays� The recommended cleaning method to

adequately sanitize the Face Mask is through washing with the use of domestic washing detergent�•Prior to washing, firmly close the mask’s velcro panels� Closing the velcro will prolong the life of both the mask and the velcro panels�•Wash the mask at 40°C/104°F (warm) with domestic washing detergent�•To prevent possible damage from incorrect heat settings it is recommended the mask is not tumble dried and that it be allowed to air- dry/

line- dry�



6


TDS_69-0590N UTM Face Mask with Integrated Goggles - Gen 2


Special protective lens for maximum field-of-view with best-in-class anti-fog performance�� Provides superior protection from ballistic and environmental threats� • Abrasion and Fog Resistant Coatings�

Lenses

The UTM one- piece Face Mask with integrated goggles was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force-on-Force training� It was specifically created to work with Ballistic Helmets and allow for proper cheek/stock weld of shoulder fired weapons� The UTM Protective Face Mask offers face, throat and eye protection that is light wearing, breathable, fully flexible and adaptable to all conditions and environments�• Light weight, allows full range of motion with excellent vision�• Breathable construction, unrestrictive airflow�• A chin Strap extender is available for the Ballistic Helmet for use

with this mask (69-0591)�

Features• Mask now sits off the face for a cooler and more

comfortable fit�• Enables the user to obtain a full stock weld allowing the

full use of iron or electronic sights on the weapon�• Full head protection is achieved when used with a

recommended (Law Enforcement, NATO style or the US Army’s PASGT/ACH or MICH)�

• Adequate space for radio equipment, ear and throat microphones�

• Unrestrictive hearing�• Does not alter head and equipment spatial relationships in training unlike fully enclosed training

helmets�

• Passes high velocity impact requirements of ANSI/ISEA Z87�1- 2015�

Product Approvals

Designation: UTM Face Mask With Integrated GogglesP/N: 69-0590NSize: One-Size fits all�

Identifiers

TECHNICAL DATA & USAGE SHEETFACE MASK WITH INTEGRATED GOGGLES

7


TDS_69-0590N UTM Face Mask with Integrated Goggles - Gen 2


•Never remove the lens during training or in or near a training area�•Do Not use bleach, Do Not Dry Clean, Do Not Tumble Dry and Do Not Iron the UTM Face Mask�•Use of any solvent other than the approved lens cleaner may lower the impact resistance of the lens, deteriorate the anti -

fog coating and will void the warranty�

WARNINGS



Usage Guidelines

The UTM Protective Face Mask with integrated goggles is intended to be issued as an item of Personal Protective Equipment (PPE)� The Face Mask must be cleaned and sanitized upon completion of training� Lens MUST BE removed before washing mask�•The Face Mask cannot be properly sanitized by the use of the disinfectant wipes or sprays� The recommended cleaning method to

adequately sanitize the Face Mask is through washing with the use of domestic washing detergent�•Prior to washing, firmly close the mask’s velcro panels� Closing the velcro will prolong the life of both the mask and the velcro panels�•Wash the mask at 40°C/104°F (warm) with domestic washing detergent�•To prevent possible damage from incorrect heat settings it is recommended the mask is not tumble dried and that it be allowed to air -dry/

line-dry�To extend the life of the lenses, clean and store your eye wear away from direct sunlight and at room temperature when not in use� To clean


and disinfect standard lenses only use the Revision Lens Cleaner (NSN 4240-01 -527-4068)� The only alternative to the Revision Lens Cleaner is using a diluted solution of lukewarm water and dish soap; wash, rinse and blot dry with a microfibre cloth�•Care should be taken not to scratch the lens at all times� Only use minimal force during cleaning�•Do not use ammonia, alkaline cleaners, disinfectant sprays/wipes, abrasive cleaning compounds or solvents when cleaning

the lens�•Exposure to or contact with chemical vapours or liquids may cause surface cracks or other damage�•Examine this lens frequently and replace it immediately if there are any signs of damage or cracking�


8


TDS_69-0590 UTM Face Mask with Integrated Goggles - Gen 2


Special protective lens for maximum field-of-view with best-in-class anti-fog performance�� Provides superior protection from ballistic and environmental threats� • Abrasion and Fog Resistant Coatings�

Lenses

The UTM one- piece Face Mask with integrated goggles was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force-on-Force training� It was specifically created to work with Ballistic Helmets and allow for proper cheek/stock weld of shoulder fired weapons� The UTM Protective Face Mask offers face, throat and eye protection that is light wearing, breathable, fully flexible and adaptable to all conditions and environments�• Light weight, allows full range of motion with excellent vision�• Breathable construction, unrestrictive airflow�• A chin Strap extender is available for the Ballistic Helmet for use

with this mask� (69-0591 NSN: 8415-01-632-4504)

Features• Mask now sits off the face for a cooler and more

comfortable fit�• Enables the user to obtain a full stock weld allowing the

full use of iron or electronic sights on the weapon�• Full head protection is achieved when used with a

recommended helmet (Law Enforcement, NATO style or the US Army’s PASGT/ACH or MICH)�

• Adequate space for radio equipment, ear and throat microphones�

• Unrestrictive hearing�• Does not alter head and equipment spatial relationships in training unlike fully enclosed training

helmets�

The UTM Face Mask with Integrated Goggles has been approved by the U�S� Army Evaluation Centre to be used for force- on-force training when utilizing CCMCK (Close Combat Mission Capability Kit) ammunition� • Berry Amendment Compliant�• Passes high velocity impact requirements of ANSI/ISEA

Z87�1- 2015�

Product Approvals

Designation: UTM Face Mask With Integrated GogglesOrigin: United StatesP/N: 69-0590NSN (NATO): 8415-01-632-4474Size: One-Size fits all�

Identifiers


9


TDS_69-0590 UTM Face Mask with Integrated Goggles - Gen 2


•Never remove the lens during training or in or near a training area�•Do Not use bleach, Do Not Dry Clean, Do Not Tumble Dry and Do Not Iron the UTM Face Mask�•Use of any solvent other than the approved lens cleaner may lower the impact resistance of the lens, deteriorate the anti -


WARNINGS



Usage Guidelines

The UTM Protective Face Mask with integrated goggles is intended to be issued as an item of Personal Protective Equipment (PPE)� The Face Mask must be cleaned and sanitized upon completion of training� Lens MUST BE removed before washing mask�•The Face Mask cannot be properly sanitized by the use of the disinfectant wipes or sprays� The recommended cleaning method to

adequately sanitize the Face Mask is through washing with the use of domestic washing detergent�•Prior to washing, firmly close the mask’s velcro panels� Closing the velcro will prolong the life of both the mask and the velcro panels�•Wash the mask at 40°C/104°F (warm) with domestic washing detergent�•To prevent possible damage from incorrect heat settings it is recommended the mask is not tumble dried and that it be allowed to air -dry/

line-dry�To extend the life of the lenses, clean and store your eye wear away from direct sunlight and at room temperature when not in use� To clean


and disinfect standard lenses only use the Revision Lens Cleaner (NSN 4240-01 -527-4068)� The only alternative to the Revision Lens Cleaner is using a diluted solution of lukewarm water and dish soap; wash, rinse and blot dry with a microfibre cloth�•Care should be taken not to scratch the lens at all times� Only use minimal force during cleaning�•Do not use ammonia, alkaline cleaners, disinfectant sprays/wipes, abrasive cleaning compounds or solvents when cleaning

the lens�•Exposure to or contact with chemical vapours or liquids may cause surface cracks or other damage�•Examine this lens frequently and replace it immediately if there are any signs of damage or cracking�


10


TDS_69-GP-BLACK Groin Protector (No Leggings)


•All protective clothing is made with a cool mesh material�

•Interior panels are constructed with durable 420D Pack Cloth and Closed Cell foam for maximum impact protection and durability�

•Double stitching�

Mesh, Padding & Materials

The UTM Groin Protector was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force-on-Force training�•Dual Elastic strap adjustments for a comfortable & secure fit�•Internal Hard Vinyl Plastic Plate for added protection�•Cut for more coverage for use by both male and female�•Lightweight & heavy duty construction�

Features

The UTM Protective Clothing have been rigorously tested in our testing facility�•Berry Amendment Compliant�

Product Approvals

Designation: UTM Groin ProtectorOrigin: United StatesP/N: 69-GP-BlackNSN (NATO): TBCSize: One-Size fits all�

Identifiers

TECHNICAL DATA & USAGE SHEETUTM GROIN PROTECTOR

11


TDS_69-GP-BLACK Groin Protector (No Leggings)


Whenever training with UTM Man-Marker Rounds, it is mandatory that all personnel in the training area wear theappropriate UTM Personal Protective Equipment which is designed to handle the impact energies of the UTMMMR� When training with UTM MMR there are to be no areas of exposed skin� It is imperative that while training isin action, ALL protective gear MUST fit correctly and be in position at all times� ALL UTM PPE are for NLTA ONLY!

WARNINGS



Usage Guidelines

UTM Protective Clothing is intended to be issued as an item of Personal Protective Equipment (PPE)� The clothingshould be cleaned and sanitized upon completion of training�•Wipecleanaftereachusewithmilddetergent/waterorwateronly.Hangdry.•Machinewashonnormalwithmilddetergent.Hangdryortumbledrynormal.



12


TDS_69-GP-BLACKN Groin Protector (No Leggings)






The UTM Groin Protector was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force-on-Force training�•Dual Elastic strap adjustments for a comfortable & secure fit�•Internal Hard Vinyl Plastic Plate for added protection�•Cut for more coverage for use by both male and female�•Lightweight & heavy duty construction�

Features


Product Approvals

Designation: UTM Groin ProtectorP/N: 69-GP-BLACKNSize: One-Size fits all�

Identifiers


13


TDS_69-GP-BLACKN Groin Protector (No Leggings)



WARNINGS



Usage Guidelines




14


TDS_69-Leg-Black Leggings with Groin Protector






The UTM Leggings with Groin Protector were designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force-on-Force training�•Adjustable fit to various leg sizes•Includes integrated, padded groin protector�•Two large front pockets�

Features


Product Approvals

Designation: UTM Leggings with Groin ProtectorP/N: 69-Leg-BlackNSN (NATO): TBCSize: One-Size fits all�

Identifiers

TECHNICAL DATA & USAGE SHEETUTM LEGGINGS WITH GROIN PROTECTOR

15


TDS_69-Leg-Black Leggings with Groin Protector



WARNINGS


•Verify that all PPE is correctly fitted, ensuring there are no exposed areas of the skin�•UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or

any of its products�

Usage Guidelines



TECHNICAL DATA & USAGE SHEETUTM LEGGINGS WITH GROIN PROTECTOR

16


TDS_69-Helmet-Black


•Abrasion and Anti -Fogging Technology�•180° visibility�

Face Shield

The UTM Full Face Anti -Fogging Helmet was designed and developed in conjunction with military and law enforcement customers to be worn while using the UTM Man Marker Round (MMR) during Force- on -Force training� UTM has the ONLY Full Face Helmet on the market, which is now available with a new injection moulded face shield, creating a stronger and clearer lens! Our helmet allows for 180° visibility, articulating full front face shield for AAR communication in the training environment without having to remove your head protection� Facial features and expressions are clearly seen and non-verbals can be responded to appropriately� Verbal communications are easily heard� We’ve field- tested our helmet in seriously extreme conditions and it held true - no fog in sight!

Features•Offers complete protection�•Lightweight, adjustable, cleans easily�•Visor lifts to allow easier communication during

after action review�•Visor lens does not fog and provides complete

180° visibility�•Clear shield allows for easier facial recognition

and nonverbal response�•Verbal communications still easily heard�•Helmet is flexible to allow for adequate cheek weld�•Easily worn with prescription glasses or sunglasses�•Simply rinse with mild soap & water and air dry - Removable neck

wrap and sweat band can be laundered seperately�

•The UTM Full Face Anti -Fogging Helmet has been approved by the U�S� Army Evaluation Centre to be used for Force-on -Force training when utilizing CCMCK (Close Combat Mission Capability Kit) ammunition�

•Passes high velocity impact requirements of ANSI/ISEA Z87�1 -2015�

Product Approvals

Designation: UTM Full Face Anti-Fogging HelmetOrigin: United StatesP/N: 69-Helmet-BlackNSN (NATO): 8415-01-632-4484

Identifiers

•Helmet Neck Wrap Kit : 501020•Helmet Face Shield : 65006•Helmet Knobs : 501019

Replacement Parts

TECHNICAL DATA & USAGE SHEETFULL FACE ANTI-FOGGING HELMET

17


TDS_69-Helmet-Black


•Never remove the face shield during training or in or near a training area�•Use of any solvent other than the approved lens cleaner may lower the impact resistance of the lens, deteriorate the anti -


WARNINGS

•Intended only for supervised training conducted in accordance with the product literature and UTM safety training protocols by law enforcement, military or professional training and security organizations�

•Verify that all PPE is correctly fitted, ensuring there are no exposed areas of the skin•Inspection for lens damage prior to every training iteration is recommended for this and every product used for Force on

Force Training� Lens should be replaced immediately if there are any sign of damage, cracking or if vision through lens is impaired�

•UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or any of its products�

Usage Guidelines

The UTM Full Face Anti -Fogging Helmet is intended to be issued as an item of Personal Protective Equipment (PPE)� The Face Mask must be cleaned and sanitized upon completion of training�•The recommended cleaning method to adequately sanitize the Full Face Anti -Fogging Helmet is through washing with the use of water and

mild dish washing detergent�•Cleaning the lens with chemicals WILL result in stress cracking of the lens� DO NOT use ammonia, alkaline cleaners, disinfectant sprays/

wipes, abrasive cleaning compounds or solvents when cleaning the face shield lens� Only use a diluted solution of warm water and dish soap, or approved Revision® Lens Cleaner (NSN 4240-01 -527-4068) as stated in our consumer literature/Product Instructions� Lens should be replaced immediately if there are any signs of damage, cracking or if vision through lens is impaired�

•Care should be taken not to scratch the lens at all times� Only use minimal force during cleaning�•Exposure to or contact with chemical vapours or liquids may cause surface cracks or other damage�


TECHNICAL DATA & USAGE SHEETFULL FACE ANTI-FOGGING HELMET

18


TDS_69-LEJKT-NV Law Enforcement Jacket Navy






The UTM Protective Clothing is the latest in personal protection for Force -on-Force training� The clothing was designed and developed in conjunction with military and law enforcement customers to correct many of the problems that are inherent in most NLTA/FOF equipment with a few new innovative features�•The vest is cut shorter to better accommodate access to the duty belt and equipment�•The vest has integrated magazine pouches like a tactical vest to accommodate handgun and rifle magazines�•Internal impact panels are strategically placed to minimize repeated shots during extended Role Playing�•The clothing has fully adjustable heavy duty velcro panels to accommodate all size variants�•Access slots and retainer straps for integration with hydration systems during extended Role Playing�•Front and back reflective “Police” patches�

Features

All UTM Protective Clothing has been rigorously tested in our testing facility�

Product Approvals

IdentifiersDesignation: UTM Law Enforcement JacketP/N: 69-LEJKT-NV-M/L, 69-LEJKT-NV-L/XL�NSN (NATO): TBCSizes: M/L, L/XL�Colour: Navy�

TECHNICAL DATA & USAGE SHEETLAW ENFORCEMENT JACKET

19


TDS_69-LEJKT-NV Law Enforcement Jacket Navy


Whenever training with UTM Man- Marker Rounds, it is mandatory that all personnel in the training area wear the appropriate UTM Personal Protective Equipment which is designed to handle the impact energies of the UTM MMR� When training with UTM MMR there are to be no areas of exposed skin� It is imperative that while training is in action, ALL protective gear MUST fit correctly and be in position at all times� ALL UTM PPE are for NLTA ONLY!

WARNINGS


•Verify that all PPE is correctly fitted, ensuring there are no exposed areas of the skin�•UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or any of its

products�

Usage Guidelines

The UTM Protective Clothing are intended to be issued as an item of Personal Protective Equipment (PPE)� The clothing should be cleaned and sanitized upon completion of training�•Wipe clean after each use with mild detergent/water or water only� Hang dry�•Machine wash on normal with mild detergent� Close velcro fasteners to avoid snagging� Hang dry or

tumble dry normal�


TECHNICAL DATA & USAGE SHEETLAW ENFORCEMENT JACKET

20


TDS_69-RPJKT-TAN Role Player Jacket Tan






The UTM Protective Clothing is the latest in personal protection for Force -on-Force training� The clothing was designed and developed in conjunction with military and law enforcement customers to correct many of the problems that are inherent in most NLTA/FOF equipment with a few new innovative features�•The jacket is longer in length and includes red & green team identifier vests�•The vest has integrated magazine pouches like a tactical vest to accommodate handgun and rifle magazines�•Internal impact panels are strategically placed to minimize repeated shots during extended Role Playing�•The clothing has fully adjustable heavy duty velcro panels to accommodate all size variants�•Access slots and retainer straps for integration with hydration systems during extended Role Playing�

Features

All UTM Protective Clothing has been rigorously tested in our testing facility�

Product Approvals

IdentifiersDesignation: UTM Role Player JacketP/N: 69-RPJKT-TAN-M/L, 69-RPLJKT-TAN-L/XL�NSN (NATO): TBCSizes: M/L, L/XL�Colour: Tan�

TECHNICAL DATA & USAGE SHEETROLE PLAYER JACKET

21


TDS_69-RPJKT-TAN Role Player Jacket Tan


Whenever training with UTM Man- Marker Rounds, it is mandatory that all personnel in the training area wear the appropriate UTM Personal Protective Equipment which is designed to handle the impact energies of the UTM MMR� When training with UTM MMR there are to be no areas of exposed skin� It is imperative that while training is in action, ALL protective gear MUST fit correctly and be in position at all times� ALL UTM PPE are for NLTA ONLY!

WARNINGS


•Verify that all PPE is correctly fitted, ensuring there are no exposed areas of the skin�•UTM assumes no responsibility for injuries, loss or damage resulting from misuse of this or any of its

products�

Usage Guidelines

The UTM Protective Clothing are intended to be issued as an item of Personal Protective Equipment (PPE)� The clothing should be cleaned and sanitized upon completion of training�•Wipe clean after each use with mild detergent/water or water only� Hang dry�•Machine wash on normal with mild detergent� Close velcro fasteners to avoid snagging� Hang dry or

tumble dry normal�


TECHNICAL DATA & USAGE SHEETROLE PLAYER JACKET

22

Table of Contents · excellent grip and feel ... • A chin Strap extender is available for the...

Documents

Transcript of Table of Contents · excellent grip and feel ... • A chin Strap extender is available for the...