Table A BOQ - files.iaa.gov.il · 1 Table A ‐ BOQ No. Description Unit Qty. Unit Price Total...

1

Table A ‐ BOQ

No. Description Unit Qty. Unit

Price

Total

Price

remark

1 Dual Fuel generator Phase 1

Design, manufacture, supply,

installation, integration

Comp. 1

1.1 Manufacture, transport to site, install,

connect BOP subsystems, controls and

auxiliaries, test and commission of a

complete dual fuel generator, 6‐7MW,

11kV, as per technical Annex A "The

Technical Specifications" and Section A

& C. without section C.11. "Upgrading

Existing Generators Synchronization

Routing" and without spare parts as per

A.25.2 "Warrantee period of the

engine‐generator". Major items, but

not limited to, the equipment and

works required to complete the Diesel

Generator #5 project:

One (1) dual fuel Gas Diesel Generator

power unit, complete with generator,

flywheel, coupling, gear box, base and

auxiliary equipment

Fuel system (Day light fuel tanks and

refueling system, concrete containment

pit, pipes, connections to the energy

center fuel system ,valves, counters and

other )

Natural gas fuel system

Air intake

2


Price

Total

Price

remark

1.1 Exhaust system‐ (Remark : stack height will be

30m at least)

lube oil system

Air starting, compressed air system

Black start

Cooling systems

Keep warm system

Barring system

Protective device (over speed, Governor, shut‐

off valves etc.)

Connectivity with the main electrical system

Grounding

Local switchboards, Control, MCC

switchboards, PLC switchboards

Controls, synchronization, load sharing,

protection, systems

Working station (HMI screen)

Connectivity with the main SCADA system

(Not include HMI screens, that will be done by

others)

Connectivity with the environment monitoring

system

3


Price

Total

Price

remark

1.1 HVAC works:

Complete air condition system for all Electrical

rooms

Fans schedules ‐ for smoke exhaust and

ventilation of main generator room

Fresh air handling units as per spec , the

drawings and schedules ‐ for ventilation ‐ inlet

including 30 % filters bank

Sheet metal air duct work as per spec. and the

drawings for all building levels

Insulation work for air ducts and piping as per

spec and drawings

Meters and gages as per spec , and the

drawings.

Foundations and mounting Supports as per spec

and the drawings.

Balancing and testing as per spec and drawings

Complete electrical plant installation for all

HVAC works including all switchboards, cabling,

control, control cable, fiber optic etc.

Connectivity with the main SCADA system (Not

include HMI screen, that will be done by others)

Communication system for phase one

Warranty period

Other

4


Price

Total

Price

remark

1.2 Electrical system‐ phase 1

1.2.1 HV114, HV214

Manufacture, transport to site, install as an

expansion to existing MV switchboard,

interconnect of controls and auxiliaries, test and

commission of a complete Schneider Electric

MC‐SET cubicle 24kV, In=2000A Isc=25kA (3sec),

maximum operating voltage of 24kV, for feeder

connection cubicle as defined in the drawings

and the specifications including: 24kV 1250A

SF6 withdrawable circuit breaker, earthling

switch, current transformers, surge arrestors,

protection relays with fiber optic connections

converters, FO cabling, metering devices,

interlocks, control devices, accessories, labels.

Com

p.

2

1.2.2 HV601, HV602

Manufacture, transport to site, install,

interconnect of controls and auxiliaries, test and

commission of a complete 24kV In=1250A

Isc=25kA, Incomer connection cubicle as

defined in the drawings and the specifications

including 1250A SF6 or vacuum withdrawable

circuit breaker, earthling switch, current and

potential transformers, surge arrestors,

protection relays with fiber optic connections

converters with FO cabling, metering devices,

control devices, accessories, labels and

Open/close I/O modules.

Com

p.

2

1.2.3 HV601A

Ditto, but 24kV Isc=25kA, potential

transformers, cubicle.

Com

p.

1

5


Price

Total

Price

remark

1.2.4 HV603

Ditto, but 24kV In=800A Isc=25kA, Step‐up

transformer connection cubicle as defined

in the drawings and the specifications

including 800A SF6 or vacuum withdrawable

circuit breaker, earthling switch, current and

potential transformers, surge arrestors,

protection relays with fiber optic

connections converters with FO cabling,

metering devices, control devices,

accessories, labels and Open/close I/O

modules.

Comp. 1

1.2.5 HV604, HV605, HV606

Ditto, but 24kV In=800A Isc=25kA, outgoing

connection cubicle as defined in the

drawings and the specifications including

800A SF6 or vacuum withdrawable circuit

breaker, earthling switch, current

transformer, surge arrestors, protection

relays with fiber optic connections

converters with FO cabling, metering

devices, control devices, accessories, labels

and Open/close I/O modules.

Comp. 3

1.2.6 HV701

Manufacture, transport to site, install,

interconnect of controls and auxiliaries, test

and commission of a complete 12kV

In=1250A Isc=20kA, Generator connection

cubicle as defined in the drawings and the

specifications including 1250A SF6 or

vacuum withdrawable circuit breaker,

earthling switch, current and potential

transformers, surge arrestors, protection

relays with fiber optic connections

converters with FO cabling, metering

devices, control devices, accessories, labels

and Open/close I/O modules.

Comp. 1

6


Price

Total

Price

remark

1.2.7 HV702

Ditto, but a complete 12kV In=1250A

Isc=20kA, bus riser cubicle as defined in the


earthling switch, withdrawable potential

transformers, surge arrestors, accessories

and labels.

Comp. 1

1.2.7 HV702

Ditto, but a complete 12kV In=1250A

Isc=20kA, bus riser cubicle as defined in the


earthling switch, withdrawable potential

transformers, surge arrestors, accessories

and labels.

Comp. 1

1.2.8 TRF010

Manufacture, transport to site, install

connect and commission of a complete oil

immersed power Transformer 22/11kV up to

10MVA Ynd11, Uk=8%, NLTC 0, ±2.5%, ±5%,

±7.5% .

Comp.

1.2.9 TRF011



immersed power Transformer 22/0.4kV

1600kVA Dyn11, Uk=6%, NLTC 0, ±2.5%,

±5%.

Comp. 1

1.2.10 TRF012



immersed power Transformer 22/0.4kV

630kVA Dyn11, Uk=4.5%, NLTC 0, ±2.5%,

±5%.

Comp. 1

7


Price

Total

Price

remark

1.2.11 NGR


connect and commission of a neutral

grounding resistor 22kV 500A/15sec.

Comp. 1

1.2.12 Design, manufacture, transport to site,

install connect a 2500A 65kA Busbar duct

including all turns and supporting structures

for connecting between transformer TRF011

and the main circuit breaker of switchboard

MCC1000.

Comp. 1

1.2.13 Supply and Installation of power cabling,

cable terminations and wiring of all MV, LV,

control, communication, fiber optic and

instrumentation

Comp. 1

1.2.14 Supply and Installation of cable tray system

for (HV,MV, LV, Communication, FIRE alarm )

Comp. 1

1.2.13 Supply and Installation of power cabling,

cable terminations and wiring of all MV, LV,


instrumentation

Comp. 1

1.2.14 Supply and Installation of cable tray system

for (HV,MV, LV, Communication, FIRE alarm )

Comp. 1

1.2.15 Conectivity with the main SCADA system

(Not include HMI screen)

Comp. 1

1.2.16 Supply and install complete lightning system

as per Israeli standard SI 1173 part 1, and

relocation of existing lightning rod after

increasing stack's height

Comp. 1

8


Price

Total

Price

remark

1.2.17 Complete BOP systems and building

accessories as described in the drawings

Comp. 1

Supply and Installation of complete lighting

and receptacles systems and outlets

according to drawings and specifications.

1.3 Design, procure, and install Increasing the

height of an existing stack to 24 meters high.

Comp. 4

1.4 Manufacture, transport to site, install inside

the generator hall, of an electrical operated

maintenance crane for handling the heaviest

electrical, mechanical part of the generator,

pumps and chiller auxiliaries and mechanical

parts as per manufacturer's standard up to 5

tons.

Comp. 1

1.5 Mandatory spare part ‐ list of all parts,

materials and costs for warrantee period

that are required for the operation of the

generator 4000H/Y‐8000H/Y. In order to

keep the guarantee availability as presented

in the contract

Comp. 1

Total for phase 1

9


Price

Total

Price

remark

2 Optional (for phase 1)

2.1 Additional price for Upgrading Existing

Generators Synchronization Routing

according to Chapter C

(option for phase 1)

Comp. 1

2.2 Design and supply of additional day tank at

capacity of 10m3 that will be connected to

the existing LFO system and will be replace

the old daily tank that shall be remove from

the site by the contractor. According to

Chapter C (option for phase 1)

Comp. 1

Total for phase 1 ‐ optional

10


Price

Total

Price

remark

3 NATURAL GAS SYSTEM‐(Phase 2‐ option)

Manufacture, transport to site, install and

connect all necessary components, controls

software programming, commission, testing

and all other. That are required for operating

the generator automatically on natural gas

Comp. 1

Total for phase 2

4 Co‐GENERATION‐ (Phase 3‐ option)

Design, manufacture, supply, installation,

integration

Comp. 1

Design, supply, install and commission

absorption chillers cooling tower and

auxiliary as per technical spec.

Major items, but not limited to, the

equipment and works required to complete

the Co ‐Generation project:

Assembled absorption chillers as per spec,

drawings and schedules.

Main centrifugal cold water pumps as per

spec , drawings and schedules.

Main centrifugal cooling water pumps as per

spec , drawings and schedules.

Main centrifugal heat recovery water pumps

as per spec , drawings and schedules.

Foundations and mounting Supports as per

spec and the drawings

11


Price

Total

Price

remark

4 Supply and install all Pipework and fittings as

per spec and drawings, including ןinsulation,

penetrations, sleeves, sealing, all excavation,

filling and recover of road.

Assembled cooling tower cell as per specs,

drawings and schedules.

Complete electrical installation for

absorption chiller and cooling tower

including , cabling, control, etc.

MCC switchboard , drawings and schedules

Supply and Installation of power cabling,

cable terminations and wiring of all LV,


instrumentation

Supply and Installation of cable tray system

for (LV, Communication )

Connectivity with the main SCADA system

(Not include HMI screen)

Warranty period

Other

Total for phase 3

12


Price

Total

Price

remark

Optional (for phase3)

price for install and commissioning

additional cooling tower cell as per specs

include all auxiliary, pipework, electrical and

control work that required to complete the

cooling tower

Total for phase 3

13


Price

Total

Price

remark

6 Engine& Generator LTSA package (Services

during the Service and Maintenance Period

as per chapter A section A25)

6.1 Technical Support for the entire term of the

Contract ‐ annual payment for hotline support

as per chapter A section A25

year 10

6.2 Option : Remote Support year

6.3 Maintenance for phase 3 (Absorption Chiller) year 10

6.4 On‐site support

6.4.1 Technician Visit ‐ arrival of a senior technical

member from manufacturer's staff to

assist/carry out a repair work, at IAA's site as

defined in the Technical Specifications.

day In addition to the

payments for

technician's

working day that is

defined as 10

hours per day, the

IAA will pay for

economy class

flight costs

(against

presentation of

invoices) and daily

allowance of 200

euros per day.

During Warranty

Period the

Technician Visit

will be provided as

part of the

Warranty with no

cost to the IAA.

6.4.2 Hourly Fee for additional work hours beyond the 10 hours work day

hour

14


Price

Total

Price

Remark

6.5 Spare Parts

6.5.1 All Spare Parts, Special Tools, Consumables

and costs of supervision by Contractor's

representative that are required, according to

Contractor's O&M Manual and in accordance

with prudent industry practices, for all

Preventative Maintenance of the Generator

up to and including full overhaul.

The contractor shall

attach a list of all

works, part’s and

costs required for

preventive

maintenance

including time

schedule until full

major overhaul,

including a

breakdown of all

parts that are

required for each

Preventative

Maintenance service

and whether such

service requires

supervision by the

Contractor.This shall

also be used for the

evaluation of the

proposals in the

table attached as

annex B to the Price

Proposal Form.

15


Price

Total

Price

Remark

6.5.2 Mandatory spare part ‐ list of all parts,

materials and costs for warrantee period that

are required for the operation of the

generator 4000H/Y‐8000H/Y. In order to keep

the guarantee availability as presented in the

contract

Comp. 1 The contractor shall

attach a list of all

parts , materials and

costs and shall

specify within this

list the

recommended

Spare Parts, Special

Tools and

Consumables

required for

Unplanned

Maintenance” or

"Corrective

Maintenance"

7 Addition Training

7.1 Training at the manufacturer’s facilities as per

annex A section (per technic)

Comp. 1

7.2 Training at the owner's facilities‐ one week

training

week 1

Total for LTSA package

Table A BOQ - files.iaa.gov.il · 1 Table A ‐ BOQ No. Description Unit Qty. Unit Price Total...

Documents

Transcript of Table A BOQ - files.iaa.gov.il · 1 Table A ‐ BOQ No. Description Unit Qty. Unit Price Total...