Tablas Weldolets, Thredolets

8/9/2019 Tablas Weldolets, Thredolets

1/44

RUN PIPE SIZES

Anvilets are manufactured to cover as many run sizes as possible per outlet size. The range of run sizes is based on a maximum gap1/16" between the fitting and the pipe on the largest size of run pipeshown on the fitting.

The following chart shows the range of run pipe sizes per outlet size.

STANDARD, EXTRA STRONG and CLASS 3000 FITTINGS . For outlet NPS 5 to 3 , order !or "#e$%!%$ run #%#e "%&e'

1/8

3/8 x 1/81/2 x 1/81 - 3/4 x 1/8

2 1/2 - 1 1/4 x 1/836-3 x 1/8

1 1/2

1 1/2 x 1 1/22 x 1 1/22 1 /2 x 1 1/23 x 1 1/24 - 3 1/2 x 1 1/2

6 - 5 x 1 1/212 - 8 x 1 1/224 - 14 x 1 1/236 - 26 x 1 1/2

1/4

3/8 x 1/41/2 x 1/41 - 3/4 x 1/4

2 1/2 - 1 1/4 x 1/436 - 3 x 1/4

2

2 x 22 1/2 x 23 x 23 1/2 x 24 x 2

5 x 26 x 210 - 8 x 218 - 12 x 236 - 20 x 2

3/8

1/2 x 3/81 - 3/4 x 3/8

2 1/2 - 1 1/4 x 3 /836 - 3 x 3/8

2 1/2

2 1/2 x 2 1/23 x 2 1/23 1/2 x 2 1/24 x 2 1/25 x 2 1/2

6 x 2 1/28 x 2 1/212 - 10 x 2 1/218 - 14 x 2 1/236 - 20 x 2 1/2

1/21/2 x 1/23/4 x 1/21 x 1/21 1/2 - 1 1/4 x 1/2

2 1/2 - 2 x 1/28 - 3 x 1/236 - 10 x 1/2 3

3 x 33 1/2 x 34 x 35 x 36 x 3

8 x 310 x 314 - 12 x 336 - 24 x 3

3/4

3/4 x 3/41 x 3/41 1/2 - 1 1/4 x 3/42 1/2 - 2 x 3/4

5- 3 x 3/412 - 6 x 3/436 - 14 x 3/4 3 1/2

3 1/2 x 3 1/24 x 3 1/25 x 3 1/26 x 3 1/28 x 3 1/2

10 x 3 1/214 - 12 x 3 1/220 - 16 x 3 1/236 - 24 x 3 1/2

1

1 x 11 1/4 x 11 1/2 x 12 x 12 1/2 x 1

3 1/2 - 3 x 15 - 4 x 110 - 6 x 136 - 12 x 1

4

4 x 45 x 46 x 48 x 4

10 x 414 - 12 x 420 - 16 x 436 - 24 x 4

1 1/4

1 1/4 x 1 1/41 1/2 x 1 1/42 x 1 1/42 1/2 x 1 1/43 1/2 - 3 x 1 1/4

5 - 4 x 1 1/48 - 6 x 1 1/418 - 10 x 1 1/436 - 20 x 1 1/4


2/44

CLASS 000 FITTINGS . For outlet NPS ( )*( to )(, order !or "#e$%!%$ run #%#e "%&e'

1/21 - 3/4 x 1/22 - 1 1/4 x 1/26 - 2 1/2 x 1/236 - 8 x 1/2

3/41 x 3/42 1/2 - 1 1/4 x 3/410 - 3 x 3/436 - 12 x 3/4

11 1/2 x 1 1/4 x 12 1/2 - 2 x 110 - 3 x 136 - 12 x 1

11/41 1/2 x 1 1/42 1/2 - 2 x 1 1/43 1/2 - 3 x 1 1/48 - 4 x 1 1/4

20 - 10 x 1 1/436 - 24 x 1 1/4 1 1/2

2 x 1 1/22 1/2 x 1 1/23 1/2 - 3 x 1 1/25 - 4 x 1 1/2

8 - 6 x 1 1/218 - 10 x 1 1/236 - 20 x 1 1/2 2

2 1/2 x 23 x 24 x 25 x 2

6 x 210 - 8 x 212 - 12 x 236 - 24 x 2

SC+' ) 0 XXS' For outlet NPS ( )*( to )(, order !or "#e$%!%$ run #%#e "%&e'

1/21/2 X 1/21 1/4 - 3/4 X 1/236 - 1 1/2 X 1/2 3/4

1 - 3/4 X 3/42 - 1 1/4 X 3/46 - 2 1/2 X 3/436 - 8 X 3/4

11 X 12 1/2 - 1 1/4 X 110 - 3 X 136 - 12 X 1

11/41 1/2 - 1 1/4 X 1 1/42 1/2 - 2 X 1 1/410 - 3 X 1 1/436 - 12 X 1 1/4

1 1/21 1/2 x 1 1/22 1/2 - 2 x 1 1/23 1/2 - 3 x 1 1/28 - 4 x 1 1/2

20 - 10 x 1 1/236 - 24 x 1 1/2 2

2 x 22 1/2 X 23 1/2 - 3 x 25 - 4 x 2

8 - 6 x 218 -10 x 236 - 20 x 2

E-a.#le/ )( 1 - ) )*( Note/If the schedules, or weights, of the bra ch a d ru !i!e are ot thesa"e, the the# "ust be clearl# s!ecified$

E-a.#le/3 %ch$ 80 x 1 1/2 %ch$ 40 &' ( )ilet$

)(1))*(

- is the largest ru !i!e si*e for which the fitti g is a!!licable$- is the s"allest ru !i!e si*e the fitti g is a!!licable$- is the outlet +bra ch si*e$

BUTTWELD ANVILETSull and !educing izes... tandard and #xtra trong

1 $imension %&% is the distance in

inches from the centre of the run pipe to the face of the Anvilet.

' $iameter ( of Anvilet bore is the same as the

inside diameter of the branch pipe of matchingweight or schedule.


3/44

The weld or root gap is notincluded in the %&% dimensions

below.

STANDARD 2EIG+T EXTRA STRONG

utlet .o"i al

u i!e (!!rox$ 't$ (!!rox$ 't$

%i*e %i*e ( & ou ds ( & ou ds1/'1/')/*)/*

1/')/* to )6

)/*1 to )6

)/*)/*+/,+/,

-/,1-/161)/161 )/16

1-/161-/161 )/161 )/16

.16

.1+

.'-

.'6

)/*)/*+/,+/,

-/,1-/161)/161 )/16

1-/161-/161 )/161 )/16

.1+

.1

.'6.)

11

1 1/*1 1/*1 1/'1 1/'

11 1/* to)6

1 1/*1 1/' to )6

1 1/'' to )6

1 1/161 1/161 1/*1 1/*

1 -/161 -/16

1 1/)'1 +/161 )/,1 )/*1 -/,

'

1 +/161 +/161 )/*1 )/*

''

.*'.-

.+-

.,'

.,-1.'

1 1/161 1/161 1/*1 1/*

1 -/161 -/16

1 1/)'1 +/161 )/,1 )/*1 -/,

'

1 +/161 +/161 )/*1 )/*

''

.**

.-)

.++

.,,.

1.)

''

' 1/'' 1/'

'' 1/' to )6

' 1/') to )6

1 1/'1 1/'1 -/,1 -/,

' 1/16' /16' +/16

)

' /16' /16

))

1.61.'.*'.+

1 1/'1 1/'1 -/,1 -/,

' 1/16' /16' +/16

)

' /16' /16

))

1.+1.,'.6'.+

))

) 1/') 1/'

)) 1/' to )6

) 1/'* to )6

1 )/*1 )/*

'1 +/,

) 1/16) 11/16) /16

*

) 11/16) 11/16

**

).,*.'-.-.-

1 )/*1 )/*

'1 +/,

) 1/16) 11/16) /16

*

) 11/16) 11/16

**

*.)*.'-.1-.6

STANDARD 2EIG+T EXTRA STRONG

utlet .o"i alu i!e (!!rox$ 't$ (!!rox$ 't$

%i*e %i*e ( & ou ds ( & ou ds**

*- o )6

''

** )/*

* )/** )/*

+.6+.1

''

** )/*

* )/** )/*

+.-+.

--

-6 to )6

' 1/,' 1/*

- 1/160

- 1)/16- /16

,.-1 .)

' 1/16' 1/*

- 1/160

- 1)/16- /16

+.-1 .*

66

6, to )6

' )/,' )/,

6 1/160

6 11/166 11/16

1*1'

) 1/16) 1/16

6 1/160

6 11/166 11/16

1-')

,,

,1 to )6

' )/*' )/*

+ 1-/160

, 11/16, 11/16

',')

) +/,) +/,

+ -/,0

, 11/16, 11/16

)')+

11

11' to )6

) 1/16) 1/16

10

1 1)/161 1)/16

))6

) 1/') 11/16

)/*0

1 +/161 +/16

*6*6

1'1'

1'1* to )6

) )/,) )/,

1'0

1' 1)/161' 1)/16

6--

) 1-/16* 1/16

11 )/*0

1)1' 1/'

6161

1* 1* ) 1/' 1) 1/* 1* 1/16 + * 1/, 1) 1* -/16 +-


4/44

1* 16 to )6 ) 1/' 0 1* 1/16 66 ) 1-/16 0 1) 1)/16 + STANDARD 2EIG+T EXTRA STRONG

utlet .o"i alu i!e (!!rox$ 't$ (!!rox$ 't$

%i*e %i*e ( & ou ds ( & ou ds1616

161, to )6

) 11/16) 11/16

1- 1/*0

16 1/1616 1/16

'+-

* +/16* )/16

1-0

16 1/'1- +/,

11-1 '

1,1,

1,' to )6

* 1/16) 1)/16

1+ 1/*0

1, -/,1, 1/16

1'-+

* 11/16* )/,

1+0

1, -/,1+ 1-/16

1)1)

''

''* to )6

* -/,*

1 1/*0

' 1/16'

1+-11,

-* 11/16

10

' 1)/16' 1/16

1,+1-,

*'*

'*'6 to )6

- -/,* /16

') 1/*0

'- 1/,'* )/16

',''

- 1/'- 1/'

')0

'- 1/,'* )/16

)16'

Each outlet size of the reducing Anvilets listed above is supplied in several different ranges or run pipe size. Please refer to the run pipe sizes chart of this catalog.

All dimensions are in inches.

STANDARD WEIGHT: tandard weight buttweld Anvilets are usedwith all sizes of tandard pipe or ch. * pipe up to and including 1 .

These Anvilets may be used in con2unction with ch. * and 3lass 'fittings.

ch. * buttweld Anvilets of outlet size '* and over are available uponre4uest.

EXTRA STRONG: #xtra strong buttweld Anvilets are used with allsizes of 5 pipe and are used with ch. , pipe up to and including size

,. These Anvilets may be used in con2unction with ch. , and class) fittings.

ch. , buttweld Anvilets of outlet size '* and over are available uponre4uest.

BUTTWELD ANVILETSull and !educing izes... chedule 16 and $ouble #xtra trong


5/44

1 $imension %&% is the distance in inches from thecentre of the run pipe to the face of the Anvilet. Theweld or root gap is not included in the %&% dimensions

below.SCHEDULE 160 and DOUBLE EXTRA STRONG

Outlet

S !e A C

A""#$%. Wt.

&$und'1/')/*

1 1/,1 1/*

/16)/*

.'-

.+11

1 1/*1 1/'

1 1/'1 )/*

'

11 -/161 1/'

.,)1.'-1.+-

'' 1/'

' )/16' +/16

1 11/16' 1/,

'.1)).),

) ' +/, ' +/, 6.)'* ) -/16 ) +/, 1 .-

- ) 11/16 * 1)/16 1*.'-6 * 1/, - )/* ' .-The reducing Anvilets listed above for outlet sizes 1/2 to 2 are suppliedin several different ranges of run pipe size for each outlet. Please referto run pipe sizes chart of this catalog.

Schedule 160 and ouble E!tra Strong butt"eld Anvilets #a$ be used incon%unction "ith &lass 6000 fittings.

(LAT ANVILETS3lass ) Threaded utweld 7 oc8et 9eld


6/44

S !e A A""#$%. Wt.&$und'1/*)/,

1/')/*

11/161)/16

11 1/16

.11.'

.)

.*1

1 1/*1 1/'

1 /)'1 11/)'

1 )/,

.+

.1.'

'' 1/'

1 1/'1 )/*

1.,'.+

) ' ).) 'lat Anvilets are designed to facilitate "elding to a flat surface for theinstallation of branch pipes or fittings.

Cla'' 6000 flat Anvilets are available on application.

SOC)ET WELD ANVILETS

ull and !educing izes ... 3lass ) and 6

Cla'' *000 REDUCING and (ULL SI+ES

OutletS !e

N$, nalRun & "e

S !e A B CD1

-.0*

E.01

/.00 (

A""#$%.Wt.

&$und'1/'1/')/*)/*

1/')/* to )6

)/*1 to )6

11

1 1/161 1/16

-/,1-/161)/161 )/16

1-/161-/161 )/161 )/16

.6''

.6''

.,'*

.,'*

.,--

.,--1. 6-1. 6-

1 1/*1 1/*

1 +/161 +/16

.'.)-.'+.*


7/44

11

1 1/*1 1/*1 1/'1 1/'

11 1/* to )6

1 1/*1 1/' to )6

1 1/'' to )6

1 -/161 -/161 -/161 -/161 )/,1 )/,

1 1/161 +/161 )/,1 )/*1 -/,

'

1 +/161 +/161 )/*1 )/*

''

1. *1. *1.),1.),1.611.61

1.))1.))1.6+-1.6+-1. 1-1. 1-

1 1)/161 1)/16' )/16' )/16' +/16' +/16

.6

.,

.,1.11.'1.-

''' 1/'' 1/'

'' 1/' to )6' 1/'

) to )6

1 1/'1 1/'1 1)/161 1)/16

' 1/16' /16' 1/'

)

' /16' /16))

'. 6+'. 6+'.*6'.*6

'.* 6'.* 6'. 6'. 6

' 1-/16' 1-/16) +/16) +/16

1.,'.'.-).

OutletS !e

N$, nalRun & "e

S !e A B CD1

-.0*

E.01

/.00 (

A""#$%.Wt.

&$und'))

) 1/'

) 1/'

)) 1/' to )6

) 1/'

* to )6

''

' 1/,

' 1/,

) 1/16) 11/16) /16

*

) 11/16) 11/16

*

*

). 6,). 6,).-*,

).-*,

).-)-).-)-*. *

*. *

* 1/,* 1/,* )/*

* )/*

).,*.'*.)

*.)**

*- to )6

' 1/*' 1/*

* 1/16* )/*

* )/** )/*

*. '6*. '6

*.-*-*.-*-

- 1/,- 1/,

+.',.

Cla'' 6000 REDUCING SI+ES : ull sizes not available;

OutletS !e

N$, nalRun & "e

S !e A CD

-.0*

E.01

/.00 (A""#$%. Wt.

&$und'1/')/*

)/* to )61 to )6

11 1/16

)/*1

.*6*

.61'.,--

1. 6-1 /16

1 '-/)'.-,.

11 1/*1 1/'

1 1/1* to )61 1/' to )6' to )6

1 -/161 -/161 )/,

1 -/161 1/'1 1-/16

.,1-1.161.)),

1.))1.6+-1. 1-

' 1/*' /16)

1.,'.6).

' ' 1/' to )6 1 1/' ' )/* 1.6,+ '.* 6 ) -/, -., Each outlet size of the reducing Anvilets listed above is supplied in several different ranges of run pipe size. Please refer to the run pipe sizes chart in this catalog.

Cla'' *000 soc8et weld Anvilets may be used with tandard and 5 pipe.Cla'' 6000 soc8et weld Anvilets may be used with ch. 16 and 55 pipe.

N$te: 1 Tolerance on sizes ' 1/' and larger is


8/44

ull and !educing izes ... 3lass ) and 6

All dimensions are in inches.Cla'' *000 REDUCING and (ULL SI+ES

OutletS !e

N$, nalRun & "e

S !e A B C (

A""#$%.Wt.

&$und'1/'1/')/*)/*

1/')/* to )6

)/*1 to )6

11

1 1/161 1/16

-/,1-/161)/161 )/16

1-/161-/161 )/161 )/16

1 1/*1 1/*

1 +/161 +/16

.'

.).)-.*'

11

1 1/*1 1/*1 1/'1 1/'

11 1/* to )6

1 1/*1 1/' to )6

1 1/'' to )6

1 -/161 -/161 -/161 -/161 )/,1 )/,

1 1/161 +/161 )/,1 )/*1 -/,

'

1 +/161 +/161 )/*1 )/*

''

1 1)/161 1)/16' )/16' )/16' +/16' +/16

.6

.,.,-1.'1.)1.6

''

' 1/'' 1/'

'' 1/' to )6

' 1/') to )6

1 1/'1 1/'

1 1)/161 1)/16

' 1/16' /16' 1/'

)

' /16' /16

))

' 1-/16' 1-/16) +/16) +/16

1.+'.''.-).

OutletS !e

N$, nalRun & "e

S !e A B C (

A""#$%.Wt.

&$und'))

) 1/'

)) 1/' to )6

) 1/'

''

' 1/,

) 1/16) 11/16) /16

) 11/16) 11/16

*

* 1/,* 1/,* -/,

*.)*.**.-


9/44

) 1/' * to )6 ' 1/, * * * -/, -.6*-

*- to )6

' 1/*' 1/*

* 1/16* )/*

* )/** )/*

- 1/,- 1/,

+.),.)

Cla'' 6000 REDUCING SI+ES : ull sizes not available;

OutletS !e

N$, nal

Run & "eS !e A B C ( A""#$%. Wt.&$und'1/')/*

)/* to )61 to )6

1 1/*1 +/16

)/*1

)/*1

1 /161 1)/16

.6

.1

1 1/*1 1/'

1 1/1* to )61 1/' to )6

' to )6

1 /161 -/,

1 11/16

1 -/161 1/'

1 1-/16

1 -/161 1/'

1 1-/16

' 1/*' /16

)

'.).).'

' ' 1/' to )6 ' 1/16 ' )/* ' )/* ) -/, 6. Each outlet size of the reducing Anviletslisted above is supplied in several different ranges of run pipe size.

Please refer to the run pipe sizeschart in this catalog.

Cla'' 6000 threaded Anvilets are manufactured only in the sizes shown.Cla'' *000 threaded Anvilets may be used with tandard and 5 pipe.Cla'' 6000 threaded Anvilets may be used with ch. 16 and 55 pipe.

ELBOW ANVILETS3lass ) and 6 uttweld Threaded and oc8et 9eld


10/44

CLASS *000 THREADED and SOC)ET WELD STANDARD and XS BUTTWELDOutlet S !e N$, nal El $2 S !e C H A""#$%. Wt. &$und'

1/*)/,1/')/*

)601 1/*)601 1/*)601 1/*)601 1/*

1 1/'1 1/'1 1/'

1 ')/)'

1 1 /)'1 1 /)'1 1 /)'

1 +/,

.-

.-.6-.+-

11 1/*1 1/'

)60')60')60'

' 1/,1 '1/)'

)

' )/16' )/,' -/,

1.1-1.'.6-

' )60) * 1/, ) )/16 -.'-STANDARD nad XS BUTTWELD3 ONL4

' 1/' As pecified * )/16 ) 1/* -.-) As pecified * 1-/16 ) 1)/16 6.'-* As pecified 6 +/16 * 1/' 11.+-6 As pecified 6 )/16 ',.

CLASS 6000 THREADED and SOC)ET WELD SCH. 160 and XXS BUTTWELDOutlet S !e N$, nal El $2 S !e C H A""#$%. Wt. &$und'

1/*)/,1/')/*

)601 1/*)601 1/*)601 1/*

)60'

1 )/,1 )/,

1 ')/)'' 1/,

1 1 /)'1 1 /)'

1 +/,' )/16

.+-

.+-

.,-1.'-

11 1/*1 1/'

)60')60')60)

' '1/)')

* 1/,

' )/,' -/,

) )/16

'.').6.'

#lbow Anvilets are welded = long radius elbows as branchconnections for pipes and fittings. They are also used as pipehanger or support bosses.

All $imensions are in inches.

LATERAL ANVILETS


11/44

3lass ) and 6 uttweld Threaded and oc8et 9eld

>ateral Anvilets provide a strong readily attached *-= lateral outlet connection

All dimensions are in inchesCLASS *000 THREADED and SOC)ET WELD STANDARD and XS BUTTWELD

Outlet S !e N$, nalRun & "e S !e

H B C A""#$%. Wt. &$und'

1/* ' 1/'01 1/* / 1'0) 1 1/' ' 1/* 1 +/16 .-)/, ' 1/'01 1/* / 1'0) 1 1/' ' 1/* 1 +/16 .-1/' ' 1/'01 1/* / 1'0) 1 1/' ' 1/* 1 +/16 .6-)/* 1 1/'01 1/* / -0' / 1'06 1 1)/16 ' )/* 1 ')/)' .+-1 ' 1/'0' / -0) / 1'06 ' 1/, ) 1/* ' 1/, 1.1-

1 1/* ' 1/'0' / -0) / 1'06 ' /16 ) 1)/16 ' '1/)' 1.1 1/' ' 1/'0' / -0) / 1'06 ' )/* * 1/* ) '.6-

' -0* / ,06 / 1'01 ) )/, - )/, * 1/, -.'-

CLASS 6000 THREADED and SOC)ET WELD SCH. 160 and XXS BUTTWELD


12/44

Outlet S !eN$, nal

Run & "e S !e H B C A""#$%. Wt. &$und'

1/* ' 1/'01 1/* / 1'0) 1 1/' ' 1/* 1 )/, .+-)/, ' 1/'01 1/* / 1'0) 1 1/' ' 1/* 1 )/, .+-1/' 1 1/'01 1/* / -0' / 1'06 1 1)/16 ' )/* 1 ')/)' .,-)/* ' 1/'0' / -0) / 1'06 ' 1/, ) 1/* ' 1/, 1.'-

' 1/'0' / -0) / 1'06 ' /16 ) 1)/16 ' '1/)' '.'

1 1/* ' 1/'0' / -0) / 1'06 ' )/* * 1/* ) '.1 1/' -0* / ,06 / 1'01 ) )/, - )/, * 1/, 6.1-

CLASS 5000THREADED (ITTINGS

NO INAL &I&ESI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

90 ELBOWSA . +? . +? . + 1.1' 1.)1 1.- 1.+- '. '.), ). ).', *.1

& 1. ? 1. ? 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).6' *.)1 -.+-

App. 9t./1 pcs. )1 )1 )1 - 6 11) 1-, ' )- 6- 11 ''+-

NO INAL &I&E

SI+E1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8


13/44


14/44

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 890 ELBOWS

A . +? . + 1.1' 1.)1 1.- 1.+- '. '.), '.- ).'- ).+- *.-

& 1. ? 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- 6.

App. 9t./1 pcs. ), ), 6) ,, 1), ''- '6 * -1 1 - 1*** ) ),NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 88; ELBOWS

3 .+-? .+- .,, 1. 1.1' 1.)1 1.), 1.6 1.+' '. 6 '.- ).1'

& 1. ? 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- 6.

App. 9t./1 pcs. '- '- -' 6, 11 1,, '1) * ** +), 11+, 1 6

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8TEES

A . +? . + 1.1' 1.)1 1.- 1.+- '. '.), '.- ).'- ).+- *.-

& 1. ? 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- 6.


15/44

App. 9t./1 pcs. ), ), ,1 11 1,, )1 )- 6* 6,6 1)1) ' ), ) -

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

CROSSESA . +? . + 1.1' 1.)1 1.- 1.+- '. '.), '.- ).'- ).+- *.-

& 1. ? 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- 6.

App. 9t./1 pcs. ), ), 1 1- '- )-6 *1) 6- ,1) 16+- 1 +- )'

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

STREET ELBOWSA . +? . + 1.1' 1.)1 1.- 1.+- '. '.), '.- ).'- ).+- *.-

1.'- 1.'- 1.- 1.6 1. * '.)1 '.6 '.,1 ).), 0 0 0

& 1. 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- 6.

App. 9t./1 pcs. '- '- ), -- ,, 1** '- *'- -1 0 0 0

?>arger than A @# 16.11 dimension.

CLASS 6000THREADED (ITTINGS


16/44

NO INAL &I&ESI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

90 ELBOWSA . + 1.1' 1.)1 1.- 1.+- '. '.), '.- ).'- ).+- *.1 *.-

& 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- -.+- 6.

App. 9t./1 pcs. '- 6) 1 6 16) '- )'- 6- +'- 1)'- ' ,, )*-6 0NO INAL &I&ESI+E

1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

8; ELBOWS3 .+- .,, 1. 1.1' 1.)1 1.), 1.6 1.+' '. 6 '.- ).1' ).1'

& 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- -.+- 6.

App. 9t./1 pcs. '- - ,, 1** '1 '6 *6 -+- - 1- ) -6 0

NO INAL &I&ESI+E

1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

TEESA . + 1.1' 1.)1 1.- 1.+- '. '.), '.- ).'- ).+- *.1 *.-


17/44

& 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- -.+- 6.

App. 9t./1 pcs. - 1 1), '1) )6) *6) +6) 6) 1,,, ', 6 *-6) 0

NO INAL &I&ESI+E

1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

CROSSESA . + 1.1' 1.)1 1.- 1.+- '. '.), '.- ).'- ).+- *.1 0

& 1. 1.)1 1.- 1.,1 '.1 '.** '. + ).)1 *. *.+- -.+- 0

App. 9t./1 pcs. -6 11 1- '+- *)1 -6) 1 +- 11- ''1 '+- -* 0

NO INAL &I&ESI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

STREET ELBOWSA 0 1. 1.1' 1.), 1.+- '. '.1' '.- 0 0 0 0

0 1.- 1.6) 1.,, '.'- '.6' '.,1 ).)1 0 0 0 0

& 0 1.'- 1.- 1.+- '. '.** '.+- ).)1 0 0 0 0

App. 9t./1 pcs. 0 )+ *- 1 16' '- )6, 6** 0 0 0 0

?>arger than A @# 16.11 dimension.

CLASS *000SOC)ET WELDING (ITTINGS


18/44

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

CO ONDI ENSIONS

: oc8et $ia.; .*' / .---/ .6 / .,--/ 1. 6-/ 1.)) / 1.6+-/ 1. 1-/ '.* 6/ '. 6/ ).-)-/ *.-*-/.** .-+- .+1 .,+- 1. ,- 1.)- 1.6 - 1. )- '.*'6 '. )1 ).-6 *.-+

3 :@in.; .1) .1) .1* .16 .1+ .' .'1 .'' .'* .) .)) .)+

$ : ore $ia.; .') / .))*/ .*6)/ .- '/ .+ */ 1. 1 / 1.)- / 1.-, / '. )+/ '.* / ). ,/ ). 66/.' .) * .-') .6-' .,-* 1. + 1.*1 1.6* '. + '.-' ).1', *. ,6

B :@in. oc8et $epth; .), .), .), .), .- .- .- .- .6' .6' .6' .+-

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

90 ELBOWSA

:Cominal;.** .** .-) .6' .+- .,, 1. 6 1.'- 1.- 1.6' '.'- '.6'

App. 9t./1 pcs 1) 1) '- - 6 1 6 16) '1) ' 6), 1 ,, ')6

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

8; ELBOWSA

:Cominal; .)1 .)1 .)1 .** .- .-6 .6 .,1 1. 1.1' 1.'- 1.6'

App. 9t./1 pcs

1) 1) 1 ), - ,, 1'- 16) '6 6+- 1 - 1,1


19/44

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

TEESA .** .** .-) .6' .+- .,, 1. 6 1.'- 1.- 1.6' '.'- '.6'

App. 9t./1 pcs '- '- )* 6 ,, 1** '1) '6) *** ,,, 1)6 ',**

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8CROSSES

A .** .** .-) .6' .+- .,, 1. 6 1.'- 1.- 1.6' '.'- '.6'

App. 9t./1 pcs '- )1 )1 ,1 11) 1-6 '** )'- -- 1-,1 ' 1 )1-

To prevent possible crac8ing of the fillet welds if the pipe isseated against the bottom of the soc8et prior to welding it isrecomended that the pipe be withdrawn approximately 1/16 in.away from the bottom of the soc8et before starting the weld.

CLASS 6000SOC)ET WELDING (ITTINGS


20/44

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8CO ONDI ENSIONS

: oc8et $ia.; .*' / .---/ .6 / .,--/ 1. 6-/ 1.)) / 1.6+-/ 1. 1-/ '.* 6/ '. 6/ ).-)-/ *.-*-/.** .-+- .+1 .,+- 1. ,- 1.)- 1.6 - 1. )- '.*'6 '. )1 ).-6 *.-+

3 :@in.; .1* .16 .1+ .' .'* .'+ .'+ .)1 .)+ .*1 .*, .-,

$ : ore $ia.; .1'6/ .'' / .)' / .*)*/ .-,'/ .+,-/ 1.1) / 1.) ,/ 1.6-+/ '. 6-/ '.-6*/ ).)+,/.1, .', .), .* * .6*' .,*- 1.1 1.)6, 1.+1+ '.1,- '.6,* ).* ,

B :@in. oc8et $epth; .), .), .), .), .- .- .- .- .6' .6' .6' .+-

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

90 ELBOWSA

:Cominal;.** .-) .6' .+- .,, 1. 6 1.'- 1.- 1.6' '.'- '.- '.6'

App. 9t./1 pcs 0 0 0 ,, 1** '- )'- -)1 6), 1' 1 ), )6),

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

8; ELBOWSA

:Cominal; .)1 .)1 .** .- .-6 .6 .,1 1. 1.1' 1.'- 1.), 1.-,

App. 9t./1 pcs

0 0 0 6 1)1 ' '6) *+- -,, +1) 1')1 '+


21/44

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

TEESA 0 0 0 .+- .,, 1. 6 1.'- 1.- 1.6' '.'- '.- '.6'

App. 9t./1 pcs 0 0 0 1 6 ' 6 )), *)1 +,1 ,6 166) '),1 *-)'

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8CROSSES

A 0 0 0 .+- .,, 1. 6 1.'- 1.- 1.6' '.'- '.- '.6'

App. 9t./1 pcs 0 0 0 1'- '- * -1) - 1 ,, ' - *1-

To prevent possible crac8ing of the fillet welds if the pipe isseated against the bottom of the soc8et prior to welding it isrecomended that the pipe be withdrawn approximately 1/16 in.away from the bottom of the soc8et before starting the weld.

HIGH &RESSURE &LUGS AND BUSHINGS


22/44

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8

&LUGS All dimensions except # and are minimumsS


23/44

HEX HEAD

A 0 .** .- .-6 .6' .+- .,1 .,1 .,, 1. 6 1.1' 1.'-0 .6' .6 .,, 1. 6 1.), 1.+- '. '.- ). ).- *.6'0 .1' .16 .1 .'' .'- .', .)1 .)* .), .*1 .-

>owest !eduction 0 1/, 1/, 1/, 1/, 1/, 1/, 1/* 1/* 1/' 1/' 1 1/'App. 9t./1 pcs 0 ' - 6 1) 1 ) 6, 16) '), )- ,)1

NO INAL &I&E SI+E 1 7 1 8 * 7 1 5 * 8 1 1 1 8 1 1 5 5 5 1 5 * 8(LUSH

A 0 .** .- .-6 .6' .+- .,1 .,1 .,, 1. 6 1.1' 1.'->owest !eduction 0 1/, 1/, 1/, 1/, 1/, 1/, 1/* 1/* )/* 1 1 1/'

App. 9t./1 pcs 0 ' - 6 1) 1) 1) 1 ), 6) 1 '

CoteD Elugs and bushings are not identified by pressure class. Theymay be used for ratings up to pressure class 6 :per A @# 16.11;

SOC)ET WELDING REDUCER INSERTS

!educer inserts comply with @ tandard E0+ .They enable standard soc8et welding fittings to beused for ma8ing any combination of pipe linereductions 4uic8ly and economically.

oc8et welding reducer inserts serve the same purpose as threaded reducing bushingswith threaded fittings.

TFE# 1 !#$G3#! HC #!T TFE# ' !#$G3#! HC #!T

CI@. I3(#T &AC( 3lass ) 0 or Gse 9ith 3lass 6 0 or Gse 9ith


24/44


25/44

x 1 1/* 1.6, .- '.,, ' 1.** 1.), .') 0 '.1' 0 0 0 0 0 0x 1 1.)* .- '.,, ' 1.- 1. - .''6 0 '.1' 0 0 0 0 0 0x )/* 1. + .- '.,, ' 1.-6 .,' .1 ) 0 '.1' 0 0 0 0 0 0

) x ' 1/' '. 1 .6' ).- 1 1.- '.*+ .)*- 1.'- 0 0 0 0 0 0 0x ' '.*1 .6' ).- ' 1. '. + .'+) 0 1.,+ 0 0 0 0 0 0x 1 1/' 1. ' .- ).- ' 1.1' 1.61 .'- 0 1.,+ 0 0 0 0 0 0x 1 1/* 1.6, .- ).- ' 1.1 1.), .') 0 1.,+ 0 0 0 0 0 0

x 1 1.)* .- ).- ' 1.'- 1. - .''* 0 1.,+ 0 0 0 0 0 0

To mimimize the posibility of crac8ing of the fillet welds. it is recomended that the shan8 portion of the reducer be withdrawn approximately 1/16 away from contact with the bottom ofthe soc8et before starting the weld. >i8ewise the pipe is to be 8ept away from contacting the

bottom of the reducer soc8et before welding.

THREADED UNIONS


26/44

• teel0to0steel seats• A. .T.@. teel specification A1 -.• @anufactured to @ 0 E,) specifications.

:3lass 6 by method of @ 0 E,);.• Taper threaded to A @# standard 1.' .1• 3lass ) brass0to0steel seats also available. !efer to price list.

@ale/female unions and stainless steel orifice plates available on re4uest

N$, nal & "e S !e D ,en' $n'A""#$%. Wt.l '. 100 "='.Cla'' *000 Cla'' 6000 L A , n.

1/* 0 1. ) 1.- .+- )-

)/, 1/* '. , 1.6 . -

1/' )/, '.1, 1.,1 1. 66

)/* 1/' '.- '.1 1.)' 1 ,

1 )/* '.6 '.-6 1.6) 16-

1 1/* 1 '., ). 6 1. ')-

1 1/' 1 1/* ). 1 ).*' '.'- )'

' 1 1/' ).) *. '.+6 *6

' 1/' ' *. ) *.,, ).)6 ,'-


27/44

) 0 *.' -.+- *. ) 116

SOC)ET WELDING UNIONS


28/44

• teel0to0steel seats• A. .T.@. teel specification A1 -.• @anufactured to @ 0 E,) specifications.

:3lass 6 by method of @ 0 E,);.•

Taper threaded to A @# standard 1.' .1• 3lass ) brass0to0steel seats alse available. !efer to pricelist.

tainless steel orifice plates available on re4uest

N$, nal & "e S !e D ,en' $n'A""#$%. Wt.l '. 100 "='.

Cla'' *000 Cla'' 6000 L A , n.B

Cla'' *000B

Cla'' 6000) , n.

1/* 0 1. ) 1.- .,6 .-6 .*' .), )*)/, 1/* '. , 1.6 1. ' .6 .-6 .), *1/' )/, '.1, 1.,1 1.') .,6 .6 .), 6))/* 1/' '.- '.1 1.*6 1. + .,6 .- 1 61 )/* '.6 '.-6 1.+ 1.)) 1. + .- 16

1 1/* 1 '., ). 6 '.16 1.6, 1.)) .- ')-1 1/' 1 1/* ). 1 ).*' '.*' 1. ' 1.6, .- )1'

' 1 1/' ).) *. '. 6 '.*1 1. ' .6' *-'' 1/' ' *. ) *.,, ).61 '. 1 '.*1 .6' ,'

) 0 *.' -.+- *.) ).-* 0 .6' 116


29/44

STANDARDERCHANT COU&LINGS

&alf couplings are chamfered on one end withthe other end s4uare.

@anufactured in accordance with A T@ specification A,6-.

@erchant couplings in CE 1/, through ' are normallysupplied straight tapped. CE ' 1/' and larger aretaper tapped.

Taper tapped standard merchant couplings in CE 1/,through ' are available upon re4uest.

AEH line pipe couplings are used in all sizes over CE 6.

3ouplings from CE 1/, through ' are dipped in rust preventative.

3ouplings CE ' 1/' and larger are phosphated.

alvanized full couplings are also available.


N$, nal& "e S !e

Out' de D a.>C$u"l n?@

Len?tT #ead'"e# n=

A""#$% Wt. L '."e# 100 & e=e'

Ca#t$n


30/44

1/')/*

1. 6)1.)1)

1 /161 -/,

''/)')/*

1*1*

1+ 1/''6

,1'

1-

11

11 1/*1 1/'

1.-+61.'.'

'' 1/16' 1/16

1-/16)1/)')1/)'

11 1/'11 1/'11 1/'

*'-6+

'') 1/')1 1/'

)'-'-

+-1+-

'' 1/'

'.+-).'-

' 1/,) 1/,

11 1/'

11 1/',

1 )'16

*, 1/'1 ) 1/'

'0

-0

)) 1/'

*.*.6'-

) 1/*) )/,

1 /161 -/,

,,

)*+-1

16+'-*

00

00

* -. ) 1/' 1 11/16 , *,, ')- 0 0- 6.' 6 ) )/* 1 )/* , ,+- *' 0 06 +.) * 1 +/, , 11,, -- 0 0

EXTRA STRONGCOU&LINGS

&alf couplings are chamfered on oneend with the other end s4uare.

@anufactured in accordance with A T@ specification A,6-.

All sizes are taper tapped.

Con recessed couplings will be supplied on CE - andunder unless otherwise specified

3ouplings CE 6 and above will be supplied recessed only.

3ouplings from CE 1/, through 1 1/' are dipped in rust

preventative.


31/44

3ouplings CE ' and larger are phosphated.

alvanized full couplings are also available.


A""#$% Wt. L '. &e# 100 & e=e'

N$, nal& "e S !e Out' de D a.>C$u"l n?@ Len?t Re=e''ed N$n/Re=e''ed Ca#t$n


32/44

These couplings are manufactured in accordance with American Eetroleum Hnstitute

pecification ->. All sizes are taper tapped )/*"per foot on diameter.

>ine pipe couplings in CE 1/, 0 1 1/' are dipped in rust preventative.3ouplings in CE ' and larger are phosphated.


N$, nal& "e S !e

Out' de D a.>C$u"l n?@ Len?t

A""#$%. Wt. L '."e# 100 & e=e'

Ca#t$n


33/44


34/44

& "e S !e >C$u"l n?@ "e# 100 & e=e'1/*)/,1/')/*

.+1

.,+-1. 6)1.)1)

1 -/,1 -/,' 1/,' 1/,

1*'-)6

11 1/*1 1/'

1.-+6'. -*'.'

' -/,' )/*' )/*

+*1 ,

-'

' 1/''.,+-).)+-

' +/,* 1/,

' 1)-)

) *. * 1/* *61

&LUGS3 BUSHINGS AND HEX CA&SERCHANT STEEL

SOLID Sbs. per

1 Eieces3arton3ontentsCominal

Eipe ize1/,1/*)/,1/'

)/*IverallElug

>ength:@inimum;

.6'-

.6,+

.,1'

. )+1. 6'

/)')/,

+/16/16

-/,

'+1,1,1*1*

'''

11,

1111-

HAXAGON BUSHINGS

CominalEipe ize

Iverall>ength

9idthAcross

lats

Approx.9eight>bs. per

1 Eieces

3arton3ontents

1/* 5 1/, .6'- .6'- ' 1)/, 5 1/*)/, 5 1/,

.+-

.+-.6,+.6,+

*-

11

1/' 5 )/,1/' 5 1/*1/' 5 1/,

.,+-

.,+-

.,+-

.,+-

.,+-

.,+-

6

1

111

)/* 5 1/')/* 5 )/,)/* 5 1/*)/* 5 1/,

1.1.1.1.

1. 6'1. 6'1. 6'1. 6'

111-1,'

1111

1 5 )/*1 5 1/'1 5 )/,

1. 6'1. 6'1. 6'

1.*)+1.*)+1.*)+

1,'+)'

---


35/44

9idthAcross

lats:Cominal;

1 1.1'- 1)/16 11 1/' )- '-

1 5 1/*1 5 1/,

1. 6'1. 6'

1.*)+1.*)+

)-*'

--

SOLID HEXAGON HEAD &LUGS

CominalEipe ize

IverallElug

>ength:@inimum;

9idthAcross

lats:Cominal;

Threads per Hnch


1 Eieces

3arton3ontents

1/,1/*)/,1/')/*

.,1'

.,+-1.1. 6'1.)1'

+/16-/,

11/16+/,

1 1/16

'+1,1,1*1*

)6

11+)'

1111-

All sizes Taper Tapped 0 )/*" per foot on diameter HCH & I! 3IATHC D lac8 0 $ipped in rust resistantalanized 0 Jinc plated inside and out. or sizes 1 1/*" and larger see our current orged teel 3atalog Eage.

COUNTERSUN) &LUGS >He% and S ua#e S$= et@

CominalEipe

ize

Thread>ength:@in.;

Threadize of oc8et

:@in.;

@etalThic8ness

ottom3ountersin8

:@in..;

Threads per inch

Approx.9eight>bs. per 1 Ecs.

3arton3ontents

4uare &ex

1/,1/*

)/,1/')/*

.)1

.**

.*,.-6

.6)

?1/*

-/16)/,1/'

)/161/*

-/16)/,/16

.

.

.1).16

.1,

'+1,

1,1*1*

11

*611

11

11-

11 1/*1 1/'

.+-

.,

.,)

1/')/*)/*

-/,)/*1

.'

.'-

.'-

11 1/'11 1/'11 1/'

'1)*-'

+--'-

' .,, +/, 1 .'6 11 1/' ,- '? 1/, size not available 4uare oc8et. All sizes Taper Tapped 0 )/* per foot on diameter.

HCH & I! 3IATHC lac8 0 $ipped in rust resistant alvanized 0 Jinc plated inside and out.All dimensions are in inches

Standa#d e#= ant Steel He% Ca"'AS E B16.* CLASS 1;0


36/44

CominalEipe ize


1 Eieces

3arton3ontents

1/,1/*)/,

1/'?

'*+

11

111

1? CIT A @# 16.) >H T#$

Available in both lac8 and alvanized inish.

GALVANI+EDSTEEL (ITTINGS(OR &LASTIC &I&E

ALE ADA&TER

Approx.9eight lbs. per

INSERT COU&LING CominalEipe ize

>ength:Hnches;

Co. of errations

Approx.

9eight lbs. per 1 Eieces


37/44

1 Eieces CominalEipe ize

1/')/*>ength

:Hnches;Co. of errations

)) 1/,

++

1-''

11 1/*1 1/'

) 1/*) 1/'

*

+++

)*-'6

'' 1/'

*- )/*

+,

*1

) 6 , ',* + 1/* , *+

1/')/*

) )/,) )/,

++

1'1,

11 1/*1 1/'

) -/,) -/,* 1/*

+++

)-*-6+

'' 1/'

* 1/*+

+,

,''

) + , )'-

* , )/* , --

BRASS ALE ADA&TERS AND INSERT COU&LINGS AVAILABLE ON RE


38/44

GENERAL IN(OR ATION (OR &I&E NI&&LES

ATERIALS END (INISHES@anufactured in accordance with A T@ pecification A+)) "9elded

and eamless 3arbon teel and Austenitic tainless teel Eipe Cipples"3arbon teel 0 9elded A-)0

#!9 A-) 0#eamless A1 6

>ow Temperature eamless A))) 0 rade 6

(INISHES3anvil steel nipples are available in blac8 or zinc coatings. Eleasespecify finish re4uired when ordering.

THREADS3anvil pipe nipples are threaded on both ends with standard tapered

pipe threads conforming to the American tandard for Eipe ThreadsAC H/A @# 1.' .1

Threads are right hand on each end unless otherwise specified. >efthandthreads or plain ends or combinations are available.

S&ECIAL LENGTHS3anvil can supply special lengths special threading and special finishes

to order.

LENGTH Cipples with lengths up through 1' in. long have a length tolerance of <1/16 in. Cipples over 1' in. long have a tolerance of < 1/, in.

IDENTI(ICATION:where practical;9elded 0

#!9 0

T$ none5 "Trademar8 5 "

tamping available upon re4uest


39/44

eamless 0 "Trademar8 heat code schedule grade" blac8 phosphate finish for visual reference

TAN) LEGS

NEW (RO CANVIL Se"te, e#3 5000

FTAN) LEGSF• or use with standard teel Tan8s • Co cradle re4uired • Available in various sizes • Threaded Ine0#nd 5 4uare 3ut

• Available from stoc8 lac8

Eart K1 0 1/*" x 6" L'11'61 0 1/*" x +" L'11'+1 0 1/*" x ," L'11',1 0 1/*" x " L'11)1 0 1/*" x 1 " L'11)-1 0 1/*" x 1'" L'11*


40/44

• 3ontact your 3anvil $istributor

SWAGED NI&&LES

ATERIALGnless otherwise specified 3anvil concentric

waged Cipples CE ' and larger are manufacturedfrom seamless pipe that meets the chemical andmechanical property re4uirements of A T@ A1 6

rade . They are mar8ed "A1 6 " :or "9E " inaccordance with fittings specification A T@ A')*;.

waged Cipples 1 1/' and smaller and all sizes of

eccentric waged Cipples are manufactured frommaterial that meets the chemical and mechanical property re4uirements of A T@ A1 -. They aremar8ed "A1 -" :or "9E ";. &exagon waged

Cipples CE 1 1/' and smaller are available onre4uest.

waged Cipples of alloy steel can be supplied uponre4uest.

utt welding ends conform with A @# 16. .

Threaded ends conform with A @# 1.' .1.

All dimensions are in inches. A""#$%. We ? t Ea= 3 &$und'

N$, nal O 'et $ & "eS !e Len?t

E==ent# =N ""le'

SCH80

SCH70

SCH160

SCHXXS

1/* x)/, x

1/' x

1/,1/*1/,

)/,1/*

' 1/*' 1/'' 1/'

' )/*' )/*

)/6*1/16+/6*

1/161/,

000

00

.1'

.1+

.1+

.'6.'6

.1+

.'*

.'*

.)6.)6

.'*

.)*

.)*

.-'.-'

A""#$%. We ? t Ea= 3 &$und'N$, nal O 'et $

& "eS !e Len?t

E==ent# =N ""le'

SCH80

SCH70

SCH160

SCHXXS

) x ' 1/''

1 1/'

1 1/*1

,,,

,,

1+/6*'-/6*) /6*

*-/6*--/6*

).*).*).*

).*).*

*.-*.-*.-

*.-*.-

6.)6.)6.)

6.)6.)


41/44

)/* x1/,1/')/,1/*

' )/*)))

11/6*)/)'-/)'+/)'

0000

.'6.*.*.*

.)6.6.6.6

.-'.,.,.,

1 x

1 1/* x

1 1/' x

)/*1/')/,1/*1

)/*1/')/,1/*

1 1/*1

)/*1/')/,1/*

) 1/') 1/') 1/'

) 1/'*****

* 1/'* 1/'* 1/'* 1/'* 1/'* 1/'

-/6*11/6*1+/6*

'1/6*/6*

1-/6*'1/6*'+/6*)1/6*+/6*1/*

'1/6*'+/6*1+/)') /6*

000000000000000

.-

.-

.-

.-

.,

.,

.,

.,

.,1.'1.'1.'1.'1.'1.'

.+

.+

.+

.+1.11.11.11.11.11.+1.+1.+1.+1.+1.+

1.1.1.

1.1.61.61.61.61.6'.*'.*'.*'.*'.*'.*

' x

' 1/' x

1 1/'1 1/*

1)/*1/')/,1/*'

1 1/'1 1/*

1)/*1/'

6 1/'6 1/'6 1/'6 1/'6 1/'6 1/'6 1/'

++++++

1)/6*1 /6*' /6*1+/)'

-/,)/*

1)/16/6*

'1/6*+/16

)+/6*'1/)'

)/*

1.-1.-1.-1.-1.-1.-1.-'.)'.)'.)'.)'.)'.)

'''''''))))))

'.,'.,'.,'.,'.,'.,'.,*.'*.'*.'*.'*.'*.'

*******666666

)/*1/'

,,

1-/161 1/)'

).*).*

*.-*.-

6.)6.)

* x )' 1/'

'1 1/'1 1/*

1)/*1/'

'+/6*11/16-)/6*1 1/)'1 1/,

1 /)'1 ')/6*1 ' /6*

-.6-.6-.6-.6-.6

-.6-.6-.6

+.-+.-+.-+.-+.-

+.-+.-+.-

1111111111

111111

00000

000

- x *)

' 1/''

1 1/'1 1/*

1

11111111111111

' /6*+/,

1 /6*1 /)'

1 )1/6*1 )+/6*1 *+/6*

1)1)1)1)1)1)1)

1+1+1+1+1+1+1+

'*'*'*'*'*'*'*

0000000

6 x -*)

' 1/''

1 1/'1 1/'

1

1'1'1'1'1'1'1'1'

1)/)'+/,

1 1 /6*1 /16

1 *-/6*1 -+/6*

'' /6*

11111111

'-'-'-'-'-'-'-'-

00

)-)-)-)-)-)-

00000000

, x 6-*)

' 1/''

1)1)1)1)1)1)

6)/6*1 1)/)'1 --/6*' /)'

' )-/6*' 11/16

))))))))))))

************

000000

000000


42/44

BULL &LUGS

ATERIAL

Gnless otherwise specified 3anvil ull Elugs CE ' and larger aremanufactured from seamless pipe that meets the chemical and mechanical property re4uirements of A T@ A1 6 rade . They are mar8ed "A1 6 " :or"9E " in accordance with fittings specification A T@ A')*;.

ull Elugs 1 1/' and smaller are manufactured from round or hex material thatmeets the chemical and mechanical property re4uirements of A T@ A1 -. Theyare mar8ed "A1 -" :or "9E ";.

Threads conform with A @# 1.' .1.

!ound ull Elugs are available in all regular schedules :A; and also in solidform : ;.

All dimensions are in inches. A""#$% ,ate We ? t Ea= 3 &$und'

N$, nal & "eS !e Len?t

SCH80

SCH70

SCH160 XXS

ROUNDSOLID

HEX.SOLID

HEX.SCH 70

1/,1/*)/,

1/')/*

''

' 1/*

' 1/'' )/*

0. ,.1'

.'.'6

0.1.16

.'*.)6

000

.)'.-

000

.*.6

.++

.1'

.''

.),.61

.1*

.1,

.'*

.*'.6

0.11.1-

.',.-1

1 1/*1 1/'

)) 1/*) 1/'

.6.6).

.,. *1.'

1.11.'1.6

1.'1.-'.

1.1.+).

1.)'.-).

.,11.)1.-

'' 1/'

*-

1.6'.,

'.'-).,

).)-.

*.6.,

*.-0

-.'0

'.*0

)) 1/'

66 1/'

*.6-.+

-.+.,

,.0

.1).-

00

00

00

* + .) 1 . 16. 1,.- 0 0 0


43/44

(INISHwaged Cipples and ull Elugs are supplied blac8 with

rust protection unless zinc plating is specified.

ORDERING IN(OR ATION3 SWAGED NI&&LESEND CONNECTIONS

waged Cipples concentric and eccentric are available in threaded bevelled plain end or grooved connections or in any combination of suchend finishes.

or simplicity the following abbreviations may be used when orderingD

EXA &LE:a; ' x 1 ch , #33 wages Cipple >#T0 #:b; ) x ' ch * waged Cipple >#E0 #T:c; 1 x 1 1/' c2 16 waged Cipple T #:d; 1 sch * x )/* ch , waged Cipple ># 0 #T

# evelled oth #ndsT # Threaded oth #ndsE # Elain oth #nds># >arge #nd evelled>#T >arge #nd Threaded>#E >arge #nd Elain

# mall #nd evelled

#T mall #nd Threaded#E mall #nd Elain

N$te: :1;

:';

Gnless otherwise specified concentric waged Cipples will be supplied.

waged Cipples can be supplied with a differentschedule wall thic8ness at each end.

Steel

HOSE (ITTINGS$# (AST3 ECONO ICAL $'e =$nne=t $n' #e"a #'


44/44

• Erecision engineered and matched to assureaccurate sizing and secure attachment of industrialhose with either bolt clamps or metal bands.

• $urable steel construction will stand up to punishing industrial and mining applications.

CO BINATION NI&&LES$esigned for easy adaptation of straight end industrial hoseto C.E.T. threaded fittings on pumps strainers valves etc.@ay also be attached to other lengths of hose by means ofa swivel female coupling.3an be used for most suctional and discharge applicationswhere moderated pressures are encountered. Elated nipplesare recommended where corrosion is encountered.N$t ntended $# =$,"#e''ed a #.

Available in plated or unplated steel. Sizes 1/2" to 6" Stainless Steel Sizes 3/4" to 4"

HOSE ENDERSHdeal for fast lasting on0the0spot repairs of damages hoseor for 2oining lengths of hose without the bul8 of swivelfittings.3an help minimize hose wastage when used to adapt short

or odd lengths of hose to meet specific needs.

Available in plated or unplated steel. Sizes 1/2" to 6"

Tablas Weldolets, Thredolets

Documents

Transcript of Tablas Weldolets, Thredolets