phantomatic T3>T3A>T3 S>T3 Star>X4>X6

GB

SELECTYOUR

PARTNER

wiNNiNg SERiES

T3 / T3A / T3S / T3 Star / X4

X6

Phantomatic: each one has its own

One range, many solutions. Phantomatic is the range of CNC machining centres for aluminium, light alloy, PVC and steel profiles with up to 3 mm thickness (according to the models).It offers many options and configurations to meet every specific requirement.Available in the 3 or 4-axes CNC version and 4300 mm X-axis stroke. The 4-axis version is also available with a 7700 mm X-axis stroke.

TAiLOREd ChOiCE

The winning combinations

Phantomatic offers various constructive solutions to adapt to the various operational requirements.In the X4 and X6 models, thanks to the 4th CNC axis, the electrospindle rotates continuously from 0° to 180° to operate along the entire contour of the workpiece. The T3 S and T3 Star models have a rotary work-table, which allows machining the profiles with angles ranging between -90° and +90°, keeping the spindle always in vertical position, thereby ensuring maximum power and precision. The 3-axes models, T3 and T3 A, allow machining the 5 sides of the profile thanks to the use of high rotational speed angular units.

ACTiONPOwER

ALU - WOOD ALU pvcSTEEL

ACTiONPOwER

Power and agility

Phantomatic can be equipped with electrospindles with high torque power ranging between 5.5 and 7.5 kW in S1 in order to carry out heavy-duty processing. The double tank lubrication system allows using both minimal oil quantity and oil emulsion micro-mist. Therefore, you can choose the best suited system according to the type of material and processing. As an option, the spindle can be set for rigid tapping and Flow-Drill® (T versions).

REFERENCES ANd CLAMPiNg

Intelligent clamps

Phantomatic always opts for the best grip. The position of every clamp unit is calculated by a software according to the operations to be carried out on the profile so as not to interfere with the processing clearance. The units are moved quickly and without any margin of error. The X6 HP version is an exception since it has two additional axes that position the clamps separately from the trolley while the machine is running. T3, T3 A, X4 and X6 models have a translation movement along the Y-axis of the clamp unit, which allows processing the sides even of important profile sections, despite the clearance of the angular unit i.e., the rotated spindle.

Left and right

To ensure correct positioning of the workpieces, Phantomatic is equipped with recessed profile reference end stops. One on the left and one on the right (optional in T3 models), selected automatically. The presence of two end stops allows processing 2 profiles simultaneously, operating in multipiece mode or oversized bars with a single programming by repositioning the workpiece on the second end stop.

ALL AROUNd

Versatile tool storage unit

The Phantomatic 4 or 8-slot tool storage unit boasts an exclusive round design that reduces the overall dimensions and increases tool change speed. The covering protects the tool storage unit from swarf and accidental knocks. Besides the standard tools, the tool storage unit can also be equipped with 2 angular units and a milling disc for machining all the sides of the profile.The Phantomatic X6 8-slot tool storage unit is located on the trolley solidly connected to the electrospindle. This solution allows for a drastic reduction of tool change times, thereby making them always available exactly where they are needed.

TOTAL CONTROL

Interface under control

The Phantomatic range operator interface is equipped with a 15” suspended monitor that can be oriented according to requirements. The touch-screen display and a user-friendly software make the interface particularly simple and intuitive. The control is integrated with the mouse, keyboard and front USB port for external memory connection. The CNC can also be set to be equipped with a barcode reader and an MG PILOT pushbutton panel that optimises the management of manual functions.

dOUBLEAREAMaximum productivity

Phantomatic X6 is available in 3 versions: X6 M, X6, X6 HP. All versions can operate in single-piece and multipiece mode on a single machining area of up to 7.7 m length.The X6 and X6 HP models also allow machining in pendular mode on two independent machining areas. The HP version allows operating in dynamic pendular mode thanks to two independent clamp positioners, controlled by two additional axes, which position the clamps while the machine is running. The positioners are equipped with a workpiece reference end stop, which allows positioning several profiles in each machining area.

Single Piece Mode

Swinging Mode Dynamic Swinging Mode

Multipiece Method

TAKE MEASURE

Measure your profile

Phantomatic X6 is equipped with a profile length measuring system. A moving plate located on the right hand side of the trolley allows the machine to electronically verify the true length of the profile to be machined. Once the workpiece has been adjusted with reference to the left and right end stops, the system electronically imports the data and the CNC automatically corrects any errors due to manual insertions.

iN YOURhANd

Close at hand

MG Pilot is the pushbutton panel of the Phantomatic range, equipped with LCD graphic display that allows to have all the machine functions close at hand. The display shows all the manual operations that are validated through the pushbutton panel; this way, the operator does not have to place himself at the CNC on board the machine. MG Pilot is particularly useful in Pendular mode.

unit ofmeasurement PHANTOMATIC T3 PHANTOMATIC T3 A PHANTOMATIC T3 S PHANTOMATIC T3 STAR PHANTOMATIC X4 PHANTOMATIC X6

WORK FIELD

X-AXIS (longitudinal) 1 side/5 sides mm 4300/4060 4000/3760 3250/3150 3250/3150 4000/3760 7700/74607320/7080 (HP version)

Y-AXIS (transversal) 1 side/5 mm 210/140 210/140 210 210 210/180 210/180

Z-AXIS (vertical) 1 side/5 sides mm 258/230 258/230 215/160 215/160 250/250 250/250

A AXIS (automatic rotation) ° - - -90°/0°/ +90° -90° ÷ +90° 0° ÷ 180° 0° ÷ 180°

POSITIONING SPEED

X AXIS (longitudinal) m/min 56 56 56 56 75 75

Y AXIS (transversal) m/min 22 22 22 22 22 22

Z AXIS (vertical) m/min 22 22 22 22 22 22

A AXIS (automatic workpiece rotation) °/min - - - - 4500 4500

ELECTROSPINDLE FEATURES

Maximum power in S1 kW 5,5 - 7,5 (O) 5,5 - 7,5 (O) 5,5 - 7,5 (O) 5,5 - 7,5 (O) 7 7

Maximum speed 1/min 20000 20000 20000 20000 16500 16500

Maximum torque Nm 7,5 7,5 7,5 7,5 7,5 7,5

Tool attachment cone HSK-63F HSK-63F HSK-63F HSK-63F HSK-50F HSK-50F

Electrospindle set for Flow-Drill® o o o o - -

TAPPING CAPACITY (with tap, on aluminium through hole)

Encoder on electrospindle for rigid tapping o o o o o o

With compensator M8 M8 M8 M8 M8 M8

Rigid tapping M10 M10 M10 M10 M10 M10

TOOL STORAGE UNIT

Automatic tool change • • • • • •

Number of tools in the storage unit 4 - 8 (O) 4 - 8 (O) 4 - 8 (O) 4 - 8 (O) 4 - 8 (O) 8

Maximum diameter of the tool that can be loaded into the storage unit mm 12 12 12 12 12 12

Maximum length of the tool that can be loaded into the storage unit mm 130 130 130 130 130 130

Blade slot in the storage unit 1 1 1 1 1 1

Maximum diameter of the blade that can be loaded into the storage unit mm 180 180 180 180 180 180

Maximum number of angular units 2 2 2 2 2 1

90° angular unit - 2 outputs - ER20 o • o o o o

Roto head O O - - - -

POSITIONING AND LOCKING OF PROFILE

Fixed automatic workpiece reference end stops 1+1 (O) 1+1 (O) 1+1 (O) 1+1 (O) 2 2

Independent dynamic workpiece reference end stops - - - - - • (HP version)

Maximum number of pneumatic clamps 4-6 (O) 4-6 (O) 4 4 4-6 (O) 6 - 12 (O)

Manual clamp positioning • - • - - -

Automatic clamp positioning through X-axis - • - • • • (M - X6 version)

Automatic clamp positioning through H and P-axes - - - - - • (HP version)

Side tunnels o • o • • •

LUBRICATION

Double tank that allows managing different lubricants 1) oil emulsion water micro-mist lubrication system and 2) minimal oil quantity lubrication system • • • • • •

CNC features

CNC-PC with LCD-TFT touch screen display • • • • • •

USB port • • • • • •

RJ45 network card • • • • • •

MG PILOT pushbutton panel o o o o • •

Barcode reader/barcode radio o o o o o o

SOFTWARE ON BOARD THE MACHINE

CAM - EDITOR - DRILL • • • • • •

CAMPLUS - JOB - SHAPE o o o o o o

OTHER OPTIONS

Rubber swarf evacuation belt o o o o o o

Fume extraction system o o o o - -

GENERAL DATA

Overall machine weight kg 1950 1950 2000 2000 2000 3600

Operating pressure bar 6 ÷ 8 6 ÷ 8 6 ÷ 8 6 ÷ 8 6 ÷ 7 6 ÷ 7

Air consumption Nl/min 175 175 175 175 175 175

Current consumption A 16 16 16 16 16 16

Installed power kW 7,5 7,5 7,5 7,5 10 10

• included o optional - not available

unit ofmeasurement PHANTOMATIC T3 PHANTOMATIC T3 A PHANTOMATIC T3 S PHANTOMATIC T3 STAR PHANTOMATIC X4 PHANTOMATIC X6

WORK FIELD

X-AXIS (longitudinal) 1 side/5 sides mm 4300/4060 4000/3760 3250/3150 3250/3150 4000/3760 7700/74607320/7080 (HP version)

Y-AXIS (transversal) 1 side/5 mm 210/140 210/140 210 210 210/180 210/180

Z-AXIS (vertical) 1 side/5 sides mm 258/230 258/230 215/160 215/160 250/250 250/250

A AXIS (automatic rotation) ° - - -90°/0°/ +90° -90° ÷ +90° 0° ÷ 180° 0° ÷ 180°

POSITIONING SPEED

X AXIS (longitudinal) m/min 56 56 56 56 75 75

Y AXIS (transversal) m/min 22 22 22 22 22 22

Z AXIS (vertical) m/min 22 22 22 22 22 22

A AXIS (automatic workpiece rotation) °/min - - - - 4500 4500

ELECTROSPINDLE FEATURES

Maximum power in S1 kW 5,5 - 7,5 (O) 5,5 - 7,5 (O) 5,5 - 7,5 (O) 5,5 - 7,5 (O) 7 7

Maximum speed 1/min 20000 20000 20000 20000 16500 16500

Maximum torque Nm 7,5 7,5 7,5 7,5 7,5 7,5

Tool attachment cone HSK-63F HSK-63F HSK-63F HSK-63F HSK-50F HSK-50F

Electrospindle set for Flow-Drill® o o o o - -

TAPPING CAPACITY (with tap, on aluminium through hole)

Encoder on electrospindle for rigid tapping o o o o o o

With compensator M8 M8 M8 M8 M8 M8

Rigid tapping M10 M10 M10 M10 M10 M10

TOOL STORAGE UNIT

Automatic tool change • • • • • •

Number of tools in the storage unit 4 - 8 (O) 4 - 8 (O) 4 - 8 (O) 4 - 8 (O) 4 - 8 (O) 8

Maximum diameter of the tool that can be loaded into the storage unit mm 12 12 12 12 12 12

Maximum length of the tool that can be loaded into the storage unit mm 130 130 130 130 130 130

Blade slot in the storage unit 1 1 1 1 1 1

Maximum diameter of the blade that can be loaded into the storage unit mm 180 180 180 180 180 180

Maximum number of angular units 2 2 2 2 2 1

90° angular unit - 2 outputs - ER20 o • o o o o

Roto head O O - - - -

POSITIONING AND LOCKING OF PROFILE

Fixed automatic workpiece reference end stops 1+1 (O) 1+1 (O) 1+1 (O) 1+1 (O) 2 2

Independent dynamic workpiece reference end stops - - - - - • (HP version)

Maximum number of pneumatic clamps 4-6 (O) 4-6 (O) 4 4 4-6 (O) 6 - 12 (O)

Manual clamp positioning • - • - - -

Automatic clamp positioning through X-axis - • - • • • (M - X6 version)

Automatic clamp positioning through H and P-axes - - - - - • (HP version)

Side tunnels o • o • • •

LUBRICATION

Double tank that allows managing different lubricants 1) oil emulsion water micro-mist lubrication system and 2) minimal oil quantity lubrication system • • • • • •

CNC features

CNC-PC with LCD-TFT touch screen display • • • • • •

USB port • • • • • •

RJ45 network card • • • • • •

MG PILOT pushbutton panel o o o o • •

Barcode reader/barcode radio o o o o o o

SOFTWARE ON BOARD THE MACHINE

CAM - EDITOR - DRILL • • • • • •

CAMPLUS - JOB - SHAPE o o o o o o

OTHER OPTIONS

Rubber swarf evacuation belt o o o o o o

Fume extraction system o o o o - -

GENERAL DATA

Overall machine weight kg 1950 1950 2000 2000 2000 3600

Operating pressure bar 6 ÷ 8 6 ÷ 8 6 ÷ 8 6 ÷ 8 6 ÷ 7 6 ÷ 7

Air consumption Nl/min 175 175 175 175 175 175

Current consumption A 16 16 16 16 16 16

Installed power kW 7,5 7,5 7,5 7,5 10 10

www.emmegi .com

© C

IFIN

- O

ctob

er 2

011

- A

ll rig

hts

rese

rved

- G

B 27

6703

The

prod

uct d

ata,

des

crip

tions

and

illu

stra

tions

app

earin

g in

this

cat

alog

ue a

re s

how

n fo

r adv

ertis

ing

purp

oses

; the

y ar

e gi

ven

as e

xam

ples

onl

y, an

d sh

all n

ot b

e bi

ndin

g on

the

man

ufac

ture

r or t

he v

endo

r und

er a

ny c

ircum

stan

ces.

For

m

arke

ting

reas

ons,

pro

duct

s m

ay b

e re

prod

uced

or p

ortra

yed

with

non

-st

anda

rd c

onfig

urat

ions

, col

ours

or o

ptio

nal e

xtra

s, in

old

er v

ersi

ons

or w

ith s

peci

al c

usto

mis

atio

ns o

r diff

eren

t tec

hnic

al c

hara

cter

istic

s, p

ossi

bly

for s

uper

veni

ng

man

ufac

turin

g re

ason

s. T

he m

anuf

actu

rer a

nd th

e ve

ndor

rese

rve

the

right

to m

ake

any

mod

ifica

tion

wha

tsoe

ver t

o th

e pr

oduc

ts. P

leas

e co

ntac

t the

sal

es p

erso

nnel

if y

ou h

ave

any

quer

ies.