SYLLABUS - rku.ac.inrku.ac.in/syllabus/syllabus/CTSem-2-2018-2019-SOE-RKU.pdfSYLLABUS 2018-19 M.TECH...

SYLLABUS

2018-19 M.TECH 2ND SEM CONSTRUCTION TECHNOLOGY (2018-20 BATCH)

SCHOOL OF ENGINEERING PROGRAM : M.TECH – Construction Technology

ADMISSION YEAR - 2018-2020 SEMESTER – II

DEFINATION OF ONE CREDIT :

1. Lecture (L): 1 hour / week / semester, 2. Practical (P): 2 hour / week / semester3.

Tutorial(T): 2 hour / week / semester

TEACHING SCHEME

Course

Code Course Name

Teaching Hours Cre

dits

Audit

course

C

IE

PS

EE

Remarks

if any

Lect

ure

Tuto

rial

Practi

cal

CN211 Advanced Concrete

Technology 3 0 2 4 N Y Y

CN212 Repairs & Rehabilitation of

Structures 3 2 0 4 N Y N

CN213 Construction Planning and

Control 3 2 0 4 N Y N

Elective-III 3 2 0 4 N Y N

Elective-IV 3 2 0 4 N Y N

Total 15 8 2 20

Total Hours 25

List of Elective Subjects:

CN214 Construction Contracts & Specification

CN215

Energy Conservation Techniques In Building

Construction

CN218 Building Services

CN219 Application of Operation Research Techniques in

Construction

N- No CIE – Continuous internal evaluation

Y – Yes PSEE – Practical semester end examination including ITD, Dissertation, Industrial project, Industrial training etc..

SYLLABUS


Course Title ADVANCED CONCRETE TECHNOLOGY

Course Code CN211

Course Credit

Theory :03

Practical :02

Tutorial :00

Credits :04

Course Learning Outcomes:

Understand the physical and chemical properties of cement.

Understand the various properties of concrete.

Understand, Analyze and Evaluate the Concrete mix design.

Understand the various special concrete and its uses.

Detailed Syllabus

Sr.

No. Name of chapter & details

Hours

Allotted

SECTION-I

1. UNIT -1 Materials And Their Properties

Review of properties of cement, their physical and chemical properties, special

purpose cements, Classification and properties of aggregates, soundness of

aggregates, alkali aggregate reaction, thermal properties of aggregates, Importance

of shape and Surface area and grading, gap graded and aggregates. Admixtures &

construction chemicals, Use of Fly Ash, Silica Fumes, Metakaolin& GGBS in

concrete

Introduction to prestressed concrete.

11

2. UNIT -2 Properties of Concrete

Rheological behavior of concrete, requirements of workability of concrete,

Durability & Effect of environmental conditions, Strength & maturity of hardened

concrete, Impact, Dynamic and fatigue behaviour of concrete, shrinkage and creep

of concrete, behaviour of concrete under fire.

10

Total 21

SECTION-II

SYLLABUS


3. UNIT -3 Permeability and durability of concrete

Permeability and Durability of concrete, Parameters of durability of concrete,

chemical attack on concrete, Production of concrete; batching mixing,

transportation, placing, compaction of concrete. Special methods of concreting and

curing, Hot weather and cold weather concreting, Guniting (Shotcreting)

6

4. UNIT -4 Concrete Mix Design

Concrete mix design, Basic considerations and choice a mix proportions, various

methods of mix designs including IS Code method. Quality control and quality

assurance of concrete, Acceptance criteria, Quality management in concrete

construction, Inspection and testing of concrete. Non-destructive testing of

concrete, core test and load test.

7

5. UNIT -5 Special Concrete

Special concrete such as high strength, Lightweight, heavy weight, vacuum

processed concrete, Mass concrete, high performance concrete, Pumpable concrete,

Self-Compacting concrete, Air entrained concrete, Ferro cement, fiber reinforced

concrete, Polymer impregnated concrete. Jet concrete. Recycling & re-use of

industrial waste material. Deterioration and repair technology of concrete, Distress

and type of repairs, crack sealing techniques

8

Total 21

Instructional method and Pedagogy:

1. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.

2. Assignments based on course content will be given to the students at the end of each

unit/topic and will be evaluated at regular interval.

3. Surprise tests/Quizzes/Seminar will be conducted.

4. The course includes tutorials, where students have an opportunity to build an appreciation

for the concepts being taught in lectures.

Reference Books:

1. Neville, A.M., Properties of Concrete, Pearson Education Asia (P) Ltd, England, 2000.

2. Concrete Technology, Gambhir M.L, Tata McGraw Hill

3. Concrete Technology, Gambhir M.L, Tata McGraw Hill

4. Concrete Technology, M.S.Shetty, S.Chand& Company New Delhi

5. Concrete microstructure, properties & materials, P.KumarMehata, Paulo & J.M. Monteiro,

6. Light Weight Concrete, Short &Kenniburg, Asia Publishing House, Bombay

Additional Resources

https://onlinecourses.nptel.ac.in/noc16_ce10/preview

SYLLABUS


Course Title REPAIRS AND REHABILITATION OF STRUCTURES

Course Code CN212

Course Credit

Theory :03

Practical :00

Tutorial :00

Credits :03


Understand the importance of Repair Strategies

Understand the Serviceability and Durability of concrete

Summarize the various techniques for repairs

Understand the demolition techniques.

Detailed Syllabus

Sr.


Hours

Allotted

SECTION-I

1. MAINTENANCE AND REPAIR STRATEGIES

Maintenance, repair and rehabilitation, Facets of Maintenance, importance of

Maintenance various aspects of Inspection, Assessment procedure for evaluating

damaged structure, causes of deterioration.

Introduction to evaluation of structure.

10

2. SERVICEABILITY AND DURABILITY OF CONCRETE

Quality assurance for concrete construction concrete properties – strength,

permeability, thermal properties and cracking. – Effects due to climate,

temperature, chemicals, corrosion – design and construction errors – Effects of

cover thickness and cracking

11

Total 21

SECTION-II

SYLLABUS


3. MATERIALS AND TECHNIQUES FOR REPAIR

Special concretes and mortar, concrete chemicals, special elements for accelerated

strength gain, Expansive cement, polymer concrete, sulphur infiltrated concrete,

ferro cement, Fibre reinforced concrete. Rust eliminators and polymers coating for

rebars during repair, foamed concrete, mortar and dry pack, vacuum concrete,

GuniteandShotcrete, Epoxy injection, Mortar repair for cracks, shoring and

underpinning. Methods of corrosion protection, corrosion inhibitors, corrosion

resistant steels, coating and cathodic protection.

10

4. REPAIRS, REHABILITATION AND RETROFITTING OF STRUCTURES

Repairs to overcome low member strength, Deflection, Cracking, Chemical

disruption, weathering corrosion, wear, fire, leakage and marine exposure. 6

5. DEMOLITION TECHNIQUES

Engineered demolition techniques for Dilapildated structures – case studies 5

Total 21








Reference Books:

1. Neville, A.M., Properties of Concrete, Pearson Education Asia (P) Ltd, England, 2000.

2. Mehta, P.K and Montevic. P.J., Concrete- Microstructure, Properties and Materials, ICI, 1997.

3. Vedhikizen Van Zanten, R., (Ed), Gerotextiles and Geomembranes in Civil Engineering.

4. Koerner, R.M., Construction and Geotechnical Methods in Foundation Engineering, McGraw Hill

Co., 1985.

5. Rosen, H.J., Construction Materials for Architecture, John Wiley, 1985.

6. Flinn, R.A and Trojan, P.K., Engineering Materials and their Applications, Jaico Publications

House, Delhi, 1999.

7. NawyE , Fundamentals of High Performance Concrete, Second Edition, John Wiley & Sons, New

York, 2001.


http://fmcet.in/CIVIL/CE2071_uw.pdf

http://cpwd.gov.in/Units/handbook.pdf

http://civildigital.com/techniques-rehabilitation-repair-structures/

http://fmcet.in/CIVIL/CE2071_uw.pdf

http://cpwd.gov.in/Units/handbook.pdf

SYLLABUS


Course Title CONSTRUCTION PLANNING AND CONTROL

Course Code CN213

Course Credit

Theory :03

Practical :00

Tutorial :02

Credits :04


Understand the importance and principles of Project Management.

Understand the Various level managerial functions and its authorities,.

Summarize the construction project planning.

Understand, Analyze and evaluate the cost control and pricing for construction

projects.

Detailed Syllabus

Sr.


Hours

Allotted

SECTION-I

1. UNIT -1

Understanding Project Management, Project manager, organization structures,

organizing and staffing the project office and team. 6

2. UNIT -2

Management functions – directing, controlling, project authority, interpersonal

influences, barriers, team building, communication, time management, conflicts 7

3. UNIT -3

Construction Planning : Project planning, milestone schedules, WBS, Network

techniques, CPM , PERT and Prima Vera , Resources leveling and smoothing 8

Total 21

SECTION-II

4. UNIT -4

Pricing and Estimating: Budget preparation, estimation of labour, material,

equipment and overhead cost, Actual cost recording and reviewing. 10

SYLLABUS


5. UNIT -5

Cost Control : Understanding control, operating cycles, cost account codes, Job

cost report, Projected Cost Estimates, status reporting, variance and earned value

Project Management Information system: MIS reporting, Daily, Weekly and

monthly reporting, Actual vs. Planned cost reports, Planning & Cost control

document. Quality and safety documentation site

11

Total 21








Reference Books:

1. Project Management, Harold Kerzner, CBS Publisers& Distributors, 2nd Edition.

2. Modern Construction Management, Frank Harris & Ronald McCaffer, Blackwell science.

3. Project Management, Harold Kerzner, CBS Publisers& Distributors, 2nd Edition.

4. Modern Construction Management, Frank Harris & Ronald McCaffer, Blackwell science.

5. Principles of Construction Management, Roy Pilcher, McGraw Hill London.


http://nptel.ac.in/courses/105103093/

https://onlinecourses.nptel.ac.in/noc16_ce02/preview

http://nptel.ac.in/courses/105103093/

SYLLABUS


Course Title CONSTRUCTION CONTRACTS & SPECIFICATION

Course Code CN214

Course Credit

Theory :03

Practical :00

Tutorial :00

Credits :03


After Successful completion of the above course, students will be able to:

Understand and evaluating the project cost estimation.

Understand the biding and legal issues in contracting,

Understand the Tendering and contractual procedures,

UnderstandClaims and disputes.

Detailed Syllabus

Sr.


Hours

Allotted

SECTION-I

1. UNIT -1

1. Project cost estimation (a) Approximate Estimate andadministrative approval

and expenditure sanction.

2. Project cost estimation (b) Detailed Estimate.

3. Rate analysis (a) standard methods as followed by

Government organizations for tendering purposes.

4. Rate analysis (b) as followed by contractor organizations forbidding Purposes.

10

2. UNIT -2

Owner's and contractor's estimate, Overhead charges - Internationally adopted

formulae, Pre-qualification of bidders, Definition of Contract Legal issues in

contract –IndiancontractAct.Types of contracts, Documents forming a contract.

11

Total 21

SECTION-II

SYLLABUS


3. UNIT -3

Introduction to specification of various construction work

Tendering and contractual procedures - Technical sanction, Notice inviting tender.

Multiple bids, Evaluation of bids, Pre-requisites in an agreement, various types of

bonds, etc.

8

4. UNIT -4

General conditions of Indian (domestic) contracts: Their background and

administration. General conditions of International contracts (FIDIC, etc.): How

different from Indian (domestic) contracts.

8

5. UNIT -5

Claims and disputes, Dispute resolution techniques, Negotiation. 5

Total 21








Reference Books:

1.Contract Management & Dispute Resolutions , S. Ranaga Rao, Engineering staff College of India


http://nptel.ac.in/courses/105103093/12

http://www.nptel.ac.in/syllabus/105102013/


SYLLABUS


Course Title ENERGY CONSERVATION TECHNIQUES IN

BUILDING CONSTRUCTION

Course Code CN215

Course Credit

Theory :03

Practical :00

Tutorial :00

Credits :03


After Successful completion of the above course, students will be able to:

Understand the Fundamentals of Energy,

Understand the Energy and Resource Conservation,

Summarize the Energy in Building Planning,

Understand, Analyze and evaluate the Energy Management.

Detailed Syllabus

Sr.


Hours

Allotted

SECTION-I

1. UNIT -1

Introduction: Fundamentals of energy - Energy Production Systems - Heating,

Ventilating and air conditioning -Solar Energy and Conservation - Energy

Economic Analysis - Energy conservation and audits -Domestic energy

consumption - savings -Energy use in buildings - Residential - commercial

buildings. Green building concepts.

7

2. UNIT -2

Environmental: Energy and Resource conservation - Design of green buildings -

Evaluation tools for building energy - Embodied and operating energy - Peak

demand - Comfort and Indoor air quality - Visual and acoustical quality - Land,

water and materials - Airborne emissions and waste management.

7

SYLLABUS


3. UNIT -3

Design: Natural building design consideration - Energy efficient design strategies -

Contextual factors - Longevity and process Assessment -Renewable energy sources

and design- Advanced building Technologies - Smart buildings - Economies and

cost analysis.

7

Total 21

SECTION-II

4. UNIT -4

Services: Energy in building design - Energy efficient and environment friendly

building - Thermal phenomena - thermal comfort - Indoor Air quality - Climate,

sun and Solar radiations -Psychometrics - passive heating and cooling systems -

Energy Analysis -Active HVAC systems -Preliminary Investigation - Goals and

policies - Energy audit - Types of energy audit - Analysis of results - Energy flow

diagram - Energy consumption/ Unit production - Identification of wastage -

Priority of conservative measures - Maintenance of management programme.

09

5. UNIT -5

Energy Management: Energy management of electrical equipment - Improvement

of power factor - management of maximum demand - Energy savings in pumps -

Fans - Compressed air systems - Energy savings in Lighting systems – Air

conditioning systems - Applications.

9

6 Introduction: introduction to green building ,construction techniques and uses

with property 03

Total 21


Lectures will be conducted with the aid of multi-media projector, black board, OHP etc.

Assignments based on course content will be given to the students at the end of each


Surprise tests/Quizzes/Seminar will be conducted.

The course includes tutorials, where students have an opportunity to build an appreciation for

the concepts being taught in lectures.

Reference Books:

1. .Contract Management & Dispute Resolutions , S. Ranaga Rao, Engineering staff College of India


SYLLABUS


http://www.lrc.ky.gov/lrcpubs/rm503.pdf


Course Title BUILDING SERVICES

Course Code CN218

Course Credit

Theory :03

Practical :00

Tutorial :00

Credits :03


Understand the importance and principles of building services .

Develop skills to evaluate types of services required for various structures.

Summarize the principles of various important design aspects.

Understand, Analyze and Evaluate the performance of different services provide.

Detailed Syllabus

Sr.


Hours

Allotted

SECTION-I

1. UNIT 1 Brief Planning of building services, Brief water supply and distribution Importance

of building services for multi-storey buildings and its application. Various types of

services provided in multi story building.

10

2. UNIT 2 Pumping and piping, classification and function of pumps, Pipe sizing for water

supply, sanitation drainage, sewage disposal and storm water drainage and

swimming pool for a multi-storey buildings.

11

Total 21

SECTION-II

http://www.lrc.ky.gov/lrcpubs/rm503.pdf

SYLLABUS


3. UNIT 3 Heating, Ventilating and Air conditioning System and services, Lighting design,

Elevators and escalators, Electrical distribution.

11

6. UNIT 4 Fire fighting services, fire safety, security and access control services, Design of

Car Parking systems.

10

Total 21








Reference Books:

1. National Building Code 2005, Part 0-10 , Bureau of Indian Standards

2. Building Services Handbook: Incorporating Current Building and Construction Regulations, F.

Hall (Author), Roger Greeno (Author)

3. Building Services Materials Handbook - Heating, Sanitation and Fire, Building Services Research

and Development Association Staff, Routledge

4.Energy economics and building design, Willan T. Mayer

5. Hand book of Designing and Installation of services in high rise building complexes, Third Edition

,2010 , Er. V.K. Jain.


http://www.arca53.dsl.pipex.com/

https://barch5a.wordpress.com/building-services-ii-2/

https://www.scribd.com/doc/55417572/Building-Services-Notes

http://www.arca53.dsl.pipex.com/

https://barch5a.wordpress.com/building-services-ii-2/

SYLLABUS - rku.ac.inrku.ac.in/syllabus/syllabus/CTSem-2-2018-2019-SOE-RKU.pdfSYLLABUS 2018-19 M.TECH...

Documents

Transcript of SYLLABUS - rku.ac.inrku.ac.in/syllabus/syllabus/CTSem-2-2018-2019-SOE-RKU.pdfSYLLABUS 2018-19 M.TECH...