Sykes-Pickavant Q1 - Jan - March 2015 Promo Brochure

NEW PRODUCTS& SPECIAL OFFERS

www.sykes-pickavant.com

INCLUDES BATTERY CARE, BRAKING, COOLING, ENGINE TIMING, LAND ROVER TOOLS, SUSPENSION, WORKSHOP TOOLS & MORE!

JANUARY - MARCH 2015

Specialist Tool Solutions

SUSP

ENSI

ON

1

ww

w.s

ykes

-pic

kava

nt.c

omFord Transit Lower Arm Bush Tool• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram • On vehicle solution with minimal strip down• Can also be used in a workshop press for lower arms when they have been removed from the vehicle• Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013• OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131

NEWAVAILABLE FEBRUARY

Scan the QR code to watch an

overview video of the Ford Transit Bearing Press Kit

Ford Transit Bearing Press KitSuccessful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press• Removes and installs bearings on both 5 and 6 stud hubs• Removes the inner and outer bearing race

£199.00

£99.00

Ford Transit Hub & Front Wheel Bearing Remover KitUpdated slide hammer kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits• For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal• Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool• Provides three different solutions in one kit: - Can be used as a traditional hub puller - Remove the stubborn inner bearing race - Use the slide hammer in the reverse direction to remove the outer bearing race

£379.95

UPDATED KIT

3 IN 1 TOOL

MADE IN THE UK

£99.95

Ford Transit Press Upgrade Kit• Set of tools to enable the original Transit Bearing Kit (08254500) and the 082545V2 kit (above) to be used in a workshop press • Suitable for use on Ford Transits ‘00-’13• Removes and installs bearings on both 5 and 6 stud hubs• Removes the inner & outer bearing race

£76.95

Ford Transit Hub & Front Wheel Bearing Remover - Upgrade Kit• Includes larger hub plate and extra-long pillars enabling owners of the original Transit Bearing Kit (08254500) to remove hubs and front wheel bearings on six stud Transits

Hub RemovalInner BearingRace Removal

Outer Bearing Race Removal

08269000

08756000

082545V2

0825500008255500

KEY FOR USE WITH UNIVERSAL PRESS FRAME (18700100)See page 10

FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100)See page 9

FOR USE WITH SP 12T HYDRAULIC RAM (18000000)See page 10

UPDATED KIT

£399.00

£159.00

SUSP

ENSI

ON

2

Tel:

0154

3 67

9900

AVAILABLE

FEBRUARYMercedes Sprinter Ball Joint ToolAdaptor Set• For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906)• Adaptor set can be used with either Universal Press Frame & Ram (187000V2 - see page 9) or a workshop press• Enables work to be carried out on the vehicle • Applications: - Sprinter ‘95 onwards - VW LT ‘96 - ‘06 - VW Crafter & Sprinter ‘06 onwards

Mercedes Sprinter Ball Joint Tool includingPress Frame & 12 Tonne Hydraulic Ram• For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906)• Includes 187304V2 Adaptor Set (left) and Press Frame with 12 Tonne Hydraulic Ram• Adaptor set can be used in a workshop press

NEW

3-Size Ball Joint Separator• Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz• Drop forged rugged, flat design with three interchangeable forks - 24, 27 and 31mm• Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range• Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation• Jaw capacity range: 30 - 65mm

NEW

£159.00

Ball Joint Separator – HGV applications• Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied• Can be upgraded to hydraulic power • Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm

OFFER £115.95SAVE £24.00

LIST PRICE £139.95

12 Tonne Hydraulic Ball Joint SeparatorUpdated kit now uses power from the SP 12 tonne hydraulic ram• Hydraulic version of the 08070000 HGV Ball Joint Separator (left)• Specification:- Jaw Opening: 70mm - Jaw Throat Width: 36mm - Jaw Throat Depth: 50mm

OFFER £219.95SAVE £70.00

LIST PRICE £289.95

187403V2

187413V2

08065000

08070000

Ford Transit Ball Joint Tool• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013• On vehicle solution provides time saving benefits• Tool designed to access the awkward location of the ball joint• Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram• Hydraulic option includes 12 Tonne SP hydraulic ram

ON VEHICLESOLUTION

Part No. Description Price

08256000 Manual Option £172.50

18256000 Hydraulic Option £249.00

*Note - Hydraulic ram included in 18256000 only

Scan the QR code to watch a video of the Ford Transit Ball Joint Tool - Hydraulic

Version

180700V2

KEY FOR USE WITH WORKSHOP PRESS See page 15

FOR USE WITH AIR TOOLSSee page 4

BEA

RIN

G R

EMO

VAL

/ IN

STA

LLAT

ION

3

ww

w.s

ykes

-pic

kava

nt.c

om• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

Part No. Size Applications Price

0812950072mm78mm82mm

Essential Kit 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 382mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70

£599.00

0812800078mm 82mm

Ford / Volvo / Land Rover / Mazda Combined Kit 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 382mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70

£345.00

08129000

62mm66mm72mm 85mm

VW Group Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 85mm - VW Multivan, Touareg, Transporter (Front / Rear)

£645.00

081220V2

62mm66mm 72mm 78mm 82mm 85mm

All Sizes Master Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC7085mm - VW Multivan, Touareg, Transporter (Front / Rear)

£845.00

08123500 62mm Audi A2, VW Lupo (Front) £175.00

08124500 66mm Skoda Fabia, VW Fox (Front), Polo £175.00

08125500 72mmAudi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster,

VW Polo (Front), VW Fox with PAS (Front) £199.00

08126500 78mm Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 £215.00

08128500 82mmFord Mondeo, Galaxy, S-Max, Land Rover Freelander 2,

Volvo S80, V70, XC60, XC70 £225.00

08127500 85mm VW Multivan, Touareg, Transporter (Front / Rear) £249.00Note: Spare Parts are available for all kits. Please see our website / catalogue

Scan the QR code to watch a video of

the 72mm GEN2 Bearing ToolFord 82mm Bearing VW Group Bearing

NEW

LO

WER

PR

ICES

!

AIR

TO

OLS

4

Tel:

0154

3 67

9900

Specification Weight Length Precision Collet Maximum RPM Air Inlet Hose min. Air Consumption

90211000 0.5kg 175mm 6mm 23,000 1/4” NPT 10mm 116 l/min

90212000 0.82kg 177mm 6.35mm 23,000 1/4” NPT 10mm 116 l/min

£79.95

£14.95

£99.95

Universal Air Swivel Joint Inlet • 2 x 360° rotation • Industrial quality• Heat treated connecting screw

‘Bionigrip’ Heavy Duty Straight Air Die Grinder ‘Bionigrip’ Heavy Duty

90° Air Die Grinder•

Micro Die Grinder• Mini composite device for small / fine grinding and milling • Provides perfect handling due to the ‘Bionigrip’ surface• Minimal vibration and low noise • Exhaust air through hose to the rear• Length: 137mm

90220000

9021100090212000

90213000

NEWNEW! ‘Bionigrip’ Air Die Grinders • Provides perfect handling due to the ‘Bionigrip’ surface• Low noise level & minimal vibration provides less “kick back” from cutters• Includes stepless trigger and air exhaust to the rear

£99.95

High Quality Air Tools that set the standard for Torque!• Smart design impact wrench with ergonomically designed handle• Single-switch can be changed for easy forward or reverse operation• Easily adjustable torque regulator • Can be configured for right and left handed use• Composite body • High visibility green body to help reduce trip hazard

Impact Wrench Specifications:

Part No. DriveMax Torque

Nm (Reverse)Torque Nm

(Fwd)Noise(dBA)

Air Consumption(l / min)

Weight(kg)

Price

90201000 1/2” 1600 1084 94.2 135 1.8 £179.0090201500 (Mini) 1/2” 680 500 93.5 130 1.08 £169.0090202000 3/4” 2600 2000 97 210 3.2 £499.0090202500 3/8” 680 500 93.5 130 1.08 £169.0090203500 1/4” 90 90 98.2 105 0.9 £139.0090204500 1” 3100 2200 110 305 6.8 £849.00

Signal Hose - 10mm (3/8”)• Length: 10 metres• High-visibilty hose to reduce trip hazard• Abrasion resistant outer cover• Working temp range -40°c to +65°c• Working pressure: 300psi• Break pressure: 1000psiN.B. Hose supplied without fittings £29.95

Rubber Boot - For 90201000• For use with 90201000 - 1/2” Impact Wrench (see above)• Protects gun from accidental damage*Impact wrench not included £16.99

Retractable Hose Reel - 20m x 10mm• Spring driven retractable hose reel c/w wall mounting brackets• Suitable for compressed air or cold water up to 20 bar working pressure• UV stabilised polypropylene• Includes 20 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard • 3/8” bsp female inlet and the hose terminates in a 3/8” bspt maleHoses also available in 20m x 8mm (3/8” fittings) and 18m x 12mm (1/2” fittings). Contact Customer Services for more information

OFFER £199.95SAVE £75.05

LIST PRICE £275.00

53399000

90201100

90210000

ENG

INE

SER

VIC

E

5

ww

w.s

ykes

-pic

kava

nt.c

om

OFFER £26.95SAVE £8.00

LIST PRICE £34.95

GM Gearbox Bearing / Race Remover• For the removal of taper bearing cups from clutch housings in M32, MT 20-6 and MT 32-6 manual gearboxes widely used in GM, Saab and Fiat Group• Specifically designed to spread the load equally without danger of cracking the gearbox casing

Scan the QR code to watch a video of the GM Gearbox Bearing / Race Remover

Dual Mass Flywheel – Special Tool• Developed in conjunction with LUK, to allow accurate testing of the Dual Mass Flywheels (DMF) unit, whilst it is still mounted on the vehicle, with the gear box removed• Includes all the components required to test the DMF including the LUK specific DMF data, instructional CD and Data Wheel which are vital to the correct operation of the kit• The Data Wheel provides specific data, per application, to allow the technician to correctly evaluate the DMF


LIST PRICE £23.95

Adjustable Oil Filter Remover - 3 leg• Spider-type wrench, c/w geared legs which automatically tighten as the force is applied• Range: 62 to 93mm diameter• 3/8” sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex

Strap Type Oil Filter Remover - For all filters up to 300mm diameter• Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference• Range: 20 to 300mm diameter• Strap Length: 1 metre long & 40mm wide• Strong steel shank and polyester strap• Self tightening band designed for fast and secure filter removal• Double ended 13/16” hex c/w 3/8” & 1/2” sq. dr

£69.95SAVE £20.00

STAR BUY


LIST PRICE £49.95

Vehicle Fluid Change Syringe - 1.5L• Transparent design to easily view the fluid• Suitable for fluid suction and supply in vehicle service• Ideal for applications such as engine / gear oil & differential fluid• 1.5L capacity with rotative switch off

08550300

081100SP03810000

66095100

03860000

Universal Timing Gear Holder• Manufactured from high strength fibre reinforced nylon polymer• Single lever design enables quick and easy use• Provides breaker bar strength for maximum holding force• Allows adjustment of cam gear once installation is complete

Universal Timing Gear Holder Kit• Timing belt service kit• Includes Universal Timing Gear Holder (left) and 4 x cam clamp pieces

07759700

07754600


LIST PRICE £42.95

NEWNEW

OFFER £49.95SAVE £30.00

LIST PRICE £79.95

£345.95

£175.00SAVE £44.00

STAR BUY

DIE

SEL

INJE

CTO

R R

EMO

VAL

6

Tel:

0154

3 67

9900

Adjustable Oil Filter Remover - 3 leg• Spider-type wrench, c/w geared legs which automatically tighten as the force is applied• Range: 62 to 93mm diameter• 3/8” sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex

Universal Injector Seat Cleaner Set• Designed to clean the injector holes after extraction work• Kit includes: - 20mm & 25mm metal brushes for injector hole cleaning - 1 x seal plug to close the injector hole while cleaning - 2 x front brushes for injector seat cleaning - 1 x front brush extension - 1 x sanding kit - 1 x seal plug holder to place & remove the plug

OFFER £49.95SAVE £30.00

LIST PRICE £79.95

Diesel Injector Seat Cleaner Set• Cleans injector seats and chambers when changing or reconditioning diesel injectors• Helps to avoid blow-back due to poorly seated injectors • Now includes: - Removal tool for copper washers - Wire brush cleaning set for chamber walls - Injector blanking plugs to avoid debris entering the cylinders - Centralising stem to improve correct cleaning seating angle

Hydraulic Injector Puller SystemsUpdated kits now include a set of solenoid sockets (01513500) and 2 x tamperproof sockets • For the removal of stubborn injectors• Provides controlled force to aid the removal of seized injectors where there is insufficient access for traditional slide hammers• Uses a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines• Supplied with injector adaptors for most modern injector types: M14 | M16 | M17 | M20 | M25 | M27

M9R Renault Kit (18582500) Applications:Renault / Nissan / GM – Dci 2 litre engines (M9R)

WHEN YOU PURCHASE 185800V2SP OR 185810V2SPWORTH £101.90

FREEPSA Adaptor Plate (18583000)A bespoke add on kit for use on PSA 2.0 & 2.2 litre HDi diesel engines

Hydraulic Injector Puller Kit • 10 tonnes Hydraulic Hollow Cylinder provides the force – use with standard hydraulic pump (not supplied)

Mechanical HydraulicInjector Puller Kit • As per 185800V2SP kit (left) but includes a mechanical hydraulic ram • Allows use of the kit ithout the need for a separate hydraulic pump

£999.95

185800V2SP 185810V2SP£1199.95

OFFER £245.00SAVE £50.00

LIST PRICE £295.00

Heavy Duty Slide Hammer Injector Remover Kit• For removal of Bosch, Delphi, Denso and Siemens injectors• Features a flexible u-joint adaptor for access in restricted areas• Contains 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, M20 x 1.0, M25 x 1.0, M27 x 1.0 - 4 x Injector Solenoid removers: M25, M27, M29, M30 - 2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex - 7mm Tamperproof: 10mm hex• Heavy Duty Slide Hammer: Hammer Weight: 5.0kg (Total Weight: 8.0kg)

Scan the QR code to watch a video of the

1.3 Common Rail Twin Injector Puller

Attachment

1.3 Common Rail Twin Injector Puller Attachment• Enables the two injectors to be removed at the same time as shared injector clamp hinders removal of injectors individually• Suitable for use with 08585000 Kit & 185800V2SP Hydraulic Injector Puller Kit above• Commonly found on 1.3 engines: Alfa: Mito, Fiat: 500 / C, Doblo, Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Punto Evo, Qubo, Strada, Ford: Ka, Lancia: Musa, Ypsilon, Opel: Agila, Astra H, Corsa D, Meriva, Vauxhall: Astra MK V, Corsa MK III and Meriva

OFFER £74.95SAVE £15.00

LIST PRICE £89.95

017500V2

01745000

08585000

08551000

OFFER £169.95SAVE £13.00

LIST PRICE £182.95

CO

MPR

ESSI

ON

& P

RES

SUR

E TE

STIN

G

7

ww

w.s

ykes

-pic

kava

nt.c

omCommon Rail Diesel (CRD) High Pressure Test KitUpdated kit now includes unique pressure limiting valve in-built to prevent extreme pressures building in test kit during engine cranking• Measures delivery pressure output from the CRD (Common Rail Diesel) high pressure pump under engine cranking conditions• Cranking test to show a “healthy” 250+ Bar output, gauge reads up to 600 Bar - Tell-tale needle shows maximum pressure achieved during cranking test• High pressure test gauge allows direct connection to the high pressure pump, providing cranking pressure measurement of the pump• M12 x 1.5 & M14 x 1.5 connections• Includes shaped high pressure connector pipes (x5) to connect and cover many applications and supplied in a plastic case

UPDATED KIT

£399.95

Diesel Engine Compression Test Kit - Standard Car Kit• For both direct and indirect diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy injector and glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Supplied in plastic case with foam insert• 560mm Rubber Hose• Gauge Scale: 0-60bar, 0-860psi• Gauge Diameter: 83mm

OFFER £215.00SAVE £31.95

LIST PRICE £246.95

Diesel Engine Compression Test Kit - Common Rail Diesel (CRD)• Covers a wide range of modern CRD diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy injector and glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Supplied in plastic case with foam insert

OFFER £375.00SAVE £24.95

LIST PRICE £399.95

Oil Pressure Test Kit• Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators• Shock protected dual scale gauge, for quick & accurate oil pressure checks• Permanently oil primed, 1m long flexible hose, enables access to difficult to reach oil switch ports• Small profile, quick coupling adaptors with built-in shut-off valve• 10 x oil switch port adaptors• Supplied in plastic case with foam insert• Gauge Scale: 0 - 10bar, 0 - 150psi• Gauge Diameter: 80mm

Petrol Engine Compression Tester • Specially designed for deep seated spark plug ports with long narrow threads• Positive lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port (which would then become extremely difficult to remove with deep seated plug ports)• Specially designed self-centering adaptors ensure minimal risk of cross threading when attempting to screw the compression adaptor into the spark plug port• Supplied in plastic case with foam insert• Gauge Scale: 0 - 20bar, 0 - 190psi • Gauge Diameter: 83mm

OFFER £156.50SAVE £19.45

LIST PRICE £175.95

Common Rail Diesel (CRD) Fuel Return Flow Kit• Designed for use on the injector return side of a CRD system• Helps to diagnose: poor / no engine starting, poor engine running, poor acceleration / general lack of engine power• Fuel resistant, highly flexible rubber hoses• Suitable for solenoid injectors only• Supplied in plastic case and includes graduated acrylic measuring block for up to six cylinders, injector adaptor sets for Bosch / Delphi / Denso / Siemens, set of reduction pipes for small diameter flow back ports and under bonnet hanging hook

OFFER £169.00SAVE £30.95

LIST PRICE £199.95

Scan the QR code to watch a video of the CRD Fuel Return Flow Kit

314660V2

314200V2

31427500

31470000

31462000

31405000

SP Induction Heater + with SP Coil Kit (96015000)The SP Induction Heater + is a redesign and upgrade of the popular Mini-Ductor II®. Uses new engineering technology for increased energy efficiency and ease of use. Now you can use the power of technology with a flameless heat to quickly release corroded or seized components and other metallic parts. All without the damage normally associated with gas torches. Heats in seconds!

Key features of the SP Induction Heater +• Specifically designed for the UK/EU: 230v/6 amp/1000 watt – with full CE certification• Operates cooler for better efficiency, handling and product longevity • Carry Case; with storage for all attachments, fits in tool chests for security • Long operating cycle time • A true 1,000 watts max output power available• LED work light illuminates work area • Integrated CE filter improves handling of product• 1 year warranty - Parts/Labour • Includes rope, u-form & pre-formed coil

OFFER £74.85SAVE £15.00

LIST PRICE £89.85

WO

RKS

HO

P TO

OLS

8

Tel:

0154

3 67

9900

Diesel Engine Compression Test Kit - Common Rail Diesel (CRD)• Covers a wide range of modern CRD diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy injector and glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Supplied in plastic case with foam insert

STAR BUYSAVE £49.95

960211SPINCLUDES SP 110V INDUCTION

HEATER + & SP COIL KIT

OR960200SP

INCLUDES SP INDUCTION HEATER + & SP COIL KIT

SP 110V Induction Heater +with SP Coil Kit (96015000) New 110 Volt version designed with site work in mind, where only 110 Volt power is permitted • Provides safe and near instant heat for site work, construction and factory maintenance users, providing a small, fast and flexible tool in place of open flame options when heating components • Time saving tool ideal for use in all environments and makes the completion of on-site risk assessments far easier • Includes features as per SP Induction Heater + (below)• Specifically designed for the UK/EU: 110v/6 amp/1000 watt with full CE certification• Includes rope, u-form & pre-formed coil

OFFER £645.00SAVE £49.95

LIST PRICE £694.95

£99.95

£67.95

SP Rope Coil Set - x3• Set of three highly adaptable coils allows user to shape to suit• Use three / four windings of coil for maximum performance

SP Coil Kit• Contains 8 x popular sizes of interchangeable coils • Supplied in protective case

SP Heat Pad• Removal of decals, graphics, stripes, emblems & body mouldings etc• Softens the adhesive to make removal simple & effective

‘Vibro-Impact’ Air Hammer• A unique concept to aid the removal of seized suspension parts• The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer• Allows the operator to control & gradually increase the force being applied, in order to loosen seized components• High visibility green handle to help reduce trip hazard • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied• Low vibration for user comfort• Supplied with a handy wall mounted storage bracket and a set of four impact hammers for variable applications OFFER £275.00

SAVE £60.00LIST PRICE £335.00

Scan the QR code to watch a video of the

‘Vibro-Impact’Air Hammer

Scan the QR code to watch a video of the Vibro Impact

Air Hammer and SP Induction Heater +, that when used

together, create a powerful solution for suspension bolts that are rusted in tight on a

vehicle

960211SP

960200SP

96015000

9602500090206000

960260SP

96015000SP Coil Kit

NEW 110V MODEL

Shown for illustrative purposes only

£29.95

LAN

D R

OV

ER

9

ww

w.s

ykes

-pic

kava

nt.c

omLand Rover Swivel Ball Joint Kit• A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 Range Rover P38A ‘94 – ‘02• Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the vehicle” solution (Inc in 18771100 only)• Designed, tested and manufactured in Great Britain

Available Options

Scan the following QR codes to watch videos of the kit in action

Overview Removal of front axle swivel ball joint

Insertion of front axle swivel ball joint

Part No. Description List Price Save Offer Price

18771000 Adaptor Set only £199.95 - £199.95

18771100 Adaptor Set plus Press Frame, Adaptor Ring & Ram £499.95 £55.00 £444.95

Land Rover Bush KitSykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models

• For radius arm, panhard bushes & general suspension bushes • Dedicated shaped press pieces for correct location / alignment• Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

MADE IN THE UK

Scan the following QR codes to watch videos of the kit in action

InsertionRemoval

Part No. Description Contents Price

18775000 Adaptor Set only

Includes 6 Adaptor Pieces for use in a workshop press with suspension parts removed from vehicle (Can be used with a press frame or C Clamp - N.B. Requires 18775100 step plate)

£139.95

18775500* Bush Kit Press Frame Option Kit includes 6 Piece Adaptor Set, 18775100 step plate,press frame, adaptor ring & 12 Tonne SP hydraulic ram £429.95

Available Options

*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp

Universal Press Frame c/w 12 tonne Hydraulic Ram• Updated unit now provides greater power• Open frame design - 200mm of clearance through the press frame• Includes adaptor ring (18780400) for use with 08780000 and related press piece sets• Ideal for use with individual model specific press piece sets

OFFER £245.00SAVE £54.00

LIST PRICE £299.00

Multi-application Step Plate• New single piece stepped press frame plate• Allows for many different sized press pieces to fit positively into the frame for precise work

187000V2 18775100

18704100Press Frame Pressure Screw• To be used in press frame instead of ram for faster operation where greater travel is required to remove / install bushes• The screw has a fine thread and roller bearing for ease of use £94.95




LAN

D R

OV

ER

10

Tel:

0154

3 67

9900

Land Rover Discovery 3 & 4 Suspension Bush Master Kit A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models • Available kits are as follows: - Master Kit - Front lower - Front upper - Rear lower - Rear upper • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm• Lower arm bushes can be replaced on vehicle without having to remove the wheel• Individual press frame pieces for each wishbone • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram) • The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See QR code

NEW

£649.00


18777100 Land Rover Discovery 3 & 4 Front Lower Kit £259.00

18777200 Land Rover Discovery 3 & 4 Front Upper Kit £169.00

18777300 Land Rover Discovery 3 & 4 Rear Lower Kit £199.00

18777400 Land Rover Discovery 3 & 4 Rear Upper Kit £169.00

Other available options

MADE IN THE UK

Scan the QR code to watch a video of the 90206000 Vibro

Impact Air Hammer & 96020000 SP Induction Heater removing the

suspension bush bolts

£59.95Land Rover Viscous Fan Tool Set• Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models (V6 engines only)• Extra long, thin design for easier working in confined spaces• Length: 650mm

Universal Press Frame• Includes adaptor ring (18780400) for use with 08780000 and related press piece sets • Can also be used with SP 8 or 12 Tonne hydraulic ram and press frame pressure screw

SP 12 Tonne Hydraulic Ram• Can be used with 18700100 Universal Press Frame - see left• Features Hex Drive, to allow for greater input with use of ratchet spanner or socket

NEW

18777000

03125000

1870010018000000

OFFER £165.00SAVE £34.00

LIST PRICE £199.00

OFFER £91.50SAVE £18.45

LIST PRICE £109.95



SUSP

ENSI

ON

11

ww

w.s

ykes

-pic

kava

nt.c

om SUSPENSION SOLUTIONS

Land Rover Discovery 3 & 4Suspension Bush Master Kit

Opel Movano / Renault Master / Nissan

Interstar - LOWER Ball Joint Adaptor Set

15-20TPress Plate

Accessories Box


Interstar - UPPER Ball Joint Adaptor Set

Ford Transit Lower Arm Bush Tool

Mercedes Sprinter Ball Joint Tool Adaptor Set

18777000

08269000

187503V3 53451000 53451200187502V3

187403V2

Hydraulic Press Range - 15T, 20T, 30T, 50T

Universal Press Support Block

Ford Transit BearingPress Kit

Car / LCV Sleeve Kit

XS Sleeve Kit - Basic

SUV / LCV Sleeve Kit

Commercial Sleeve Kit

XS Sleeve Kit - Master

Upgrade Kit - From 08790000

to 08797500

Land Rover Bush Press Kit

Ford Transit Press Upgrade Kit

5343 SERIES

0877000008756000

08780000 08795000

18775000

08255000

08786500 0879750008785500 08790000

“TAKE THE PART TO THE PRESS”

AVAILABLE FEBRUARY

AVAILABLE FEBRUARY

AVAILABLE FEBRUARY

18777400

18777300

18777200

18777100Front Lower Kit

Front Upper Kit

Rear Lower Kit

Rear Upper Kit

Press Piece Sets

5345150053453000

SUSP

ENSI

ON

12

Tel:

0154

3 67

9900

SUSPENSION SOLUTIONS

Universal Press Frame c/w 12 tonne Hydraulic Ram

Land Rover Discovery 3 & 4Suspension Bush Master Kit


Interstar - LOWER Ball Joint Adaptor Set

Land Rover Swivel Ball Joint Adaptor Set


Interstar - UPPER Ball Joint Adaptor Set

Fiesta & Focus Bush Kit

Car / LCV Sleeve Kit

Multi-applicationStep Plate

Fiesta Bush Adaptor Set

Focus Bush Adaptor Set

XS Sleeve Kit - Basic

Press FramePressure Screw

SUV / LCV Sleeve Kit

Commercial Sleeve Kit

XS Sleeve Kit - Master

Adaptor Ring

Upgrade Kit - From 08790000

to 08797500

Land Rover Bush Press Kit

Ford Transit Lower Arm Bush Tool

Mercedes Sprinter Ball Joint Tool Adaptor Set

187000V2

18777000

18732100

18732200

18771000

18732500

08780000

18775100

08795000

18775000

08269000187503V3187502V3 187403V2

08786500

18780400

0879750008785500

18704100

08790000

Universal Press Support Block

“TAKE THE PRESSTO THE VEHICLE”

AVAILABLE FEBRUARY

AVAILABLE FEBRUARY

18777400

18777300

18777200

18777100Front Lower Kit

Front Upper Kit

Rear Lower Kit

Rear Upper Kit

£325.00

£249.00

SUSP

ENSI

ON

13

ww

w.s

ykes

-pic

kava

nt.c

om Universal Press & Pull Sleeve Kit - Car / LCV Kit• Contains 20x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm• 4x Step Plates / 4x Pulling Spindles with thrust bearings• Supplied in moulded storage case

NEWXS Sleeve Kit - Basic• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above) to increase applications for smaller bushes• Contains 10 x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm• Includes extension spindle with thrust bearing, lock nuts and grease• Supplied in moulded storage case

XS Sleeve Kit - Master• Stand alone kit for smaller bush applications• Contains 10 x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 14 - 32mm• Outside Diameter Range: 24 - 42mm• Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts & grease• Supplied in moulded storage case

NEW

£379.00

PURCHASE 08780000 UNIVERSAL PRESS & PULL SLEEVE KIT & 08785500 XS SLEEVE KIT (ABOVE) FOR A SPECIAL OFFER PRICE

ALREADY HAVE ONE OF THESE??....

....THEN THE NEW XS SLEEVE KIT IS A GREAT ADDITION!

087800SP Universal Press & Pull Sleeve Kit c/w XS Sleeve Kit - Basic

+ £578.00 SAVE £50.00

COMBINED OFFER

Universal Press & Pull Sleeve Kit - SUV / LCV• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above)• Allows access to a wider range of vehicles - e.g. SUV’s & LCV’s• 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20• 8 x Press Sleeves in 2mm diameter steps • 4 x Step Plate Discs• Inside Dia. Range: 82 - 88mm & 98 - 104mm • Outside Dia Range: 92 - 98mm & 108 - 114mm

Scan the QR code to watch an overview video of Suspension Removal & Installation Tools

OFFER £675.00SAVE £150.00

LIST PRICE £825.00

Universal Press & Pull Sleeve Kit - Commercial Vehicle• Complete kit for SUV, LCV, PSV, HGV• Contains 20x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 74 - 112mm in 2mm steps• Outside Diameter Range: 84 - 122mm in 2mm steps• 4x Step Plate Discs / 4x Pulling Spindles with nuts & thrust bearings M10 / M12 / M14 / M16• 2 x 20mm Heavy Duty Pulling Spindles (M20 long & M20 short) with thrust bearings

OFFER £1150.00SAVE £245.00

LIST PRICE £1395.00

Upgrade Kit - From 08790000 to 08797500• For owners of kit 08790000 (SUV / LCV - above) who wish to upgrade to the full contents of the combined LCV / HGV Kit (08797500 - left)

OFFER £475.00SAVE £110.00

LIST PRICE £585.00

08780000

08785500

0878650008790000

08795000

08797500




=

AVAILABLE FEBRUARY

18732200 - Focus Adaptors

18732100 - Fiesta Adaptors

SUSP

ENSI

ON

14

Tel:

0154

3 67

9900

XS Sleeve Kit - Master• Stand alone kit for smaller bush applications• Contains 10 x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 14 - 32mm• Outside Diameter Range: 24 - 42mm• Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts & grease• Supplied in moulded storage case

Fiesta & Focus Master Bush Kit including Press Frame & Pressure Screw• Kit includes adaptor set for the removal and installation of trailing arm bushes, 18700100 Press Frame and 18704100 Pressure Screw• Bush OEM Reference Numbers: Fiesta - 1011363, 1016439, 96FB5K653CA Focus - 1 061 670, 1304124Fiesta Applications:- Fiesta ‘95-’02 - KA ‘96-’08 - Puma ‘96-’02Focus Applications: - C-MAX ‘07- MPV- MKI ‘98-’04 Estate, Hatchback, Saloon, Van- MKII ‘04- Convertible, Hatchback, Saloon, Van

Also works with the following applications: - Kuga ‘08- Off Road- Mazda 3 (BK) ‘03-’09 Saloon, Hatchback- Mazda 5 (CR/CW) ‘05- MPV- Volvo C30 ‘06- Hatchback- Volvo C70 II ‘07- Cabrio - Volvo S40 II ‘04-’12 Saloon- Volvo V50 ‘04-’12 Estate

Opel Movano / Renault Master / Nissan Interstar Ball Joint Tool Kit• For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards • Enables work to be carried out on the vehicle


18732100* Adaptor Set for Fiesta Trailing Arm Bushes £99.9518732200* Adaptor Set for Focus Trailing Arm Bushes £99.95


187502V3 Adaptor Set for UPPER Ball Joint £99.00187503V3 Adaptor Set for LOWER Ball Joint £99.00

Adaptor Sets

Adaptor Sets

Adaptors in the following kits can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram

Adaptors in the following kits can be used in a press frame with a hydraulic ram

MADE IN THE UK

£399.00

£399.00

£19.95

Ford & Volvo Rear Bush Tool KitUpdated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars• Individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush• Correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush• Suitable for: Ford: Mondeo & Mondeo Estate ‘07-, S-Max & Galaxy ‘06- Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-

ON CAR SOLUTIONFor a full applications list, please visit our website - www.sykes-pickavant.com

Suitable for both standard and new longer bushes

OFFER £279.00SAVE £116.00

LIST PRICE £395.00

18732000

18780400

187512V3

087304V2

Adaptor Ring• Ring sits in press frame for use with 08780000 Universal Press & Pull Sleeve Kit and related press piece sets to hold adaptors in place

UPDATED KIT

NEW LOWER PRICES!

NEW LOWER PRICE!



WO

RKS

HO

P EQ

UIP

MEN

T

15

ww

w.s

ykes

-pic

kava

nt.c

omNEW Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks

• Welded, heavy duty steel frame • Two speed pump• Overload safety valve • Automatic arm return• Pressure gauge • V blocks• Winch for table (For models 53436400 & 53436500) • Manufactured in the EU• Piston over-travel limit stop

NEW

KEYFOR USE WITH UNIVERSAL PRESS FRAME (18700100)See page 10



FOR USE WITH WORKSHOP PRESS See page 15


Part No. Rating Height (mm)

Width (mm)

Depth (mm)

Bed Depth (mm)

Range (mm)

Weight (kg) Price

53436000* 15T 1930 920 650 170 85 - 950 150 £549.00

53436200* 20T 2030 940 650 180 65 - 1030 165 £669.00

53436400* 30T 2060 1120 650 200 115 - 1020 230 £989.00

53436500 50T 2290 1220 650 210 70 - 1065 370 £1549.00

£49.95

£199.00

£179.00

£9.95

£269.00

*Recommended for use with Universal Press Support Block - 08770000 - See page 17

53390000Pneumatic Oil Extractor• Remove and extract waste fluids or oil from an engine with flexible PV tube and robust probe• Powered from compressed air• 70L tank capacity• Adjustable 10L oil capture pan• Visible fill level indicator• 1 - 2 L/Min Suction capacity depending on nozzle used• Working pressure 8-10 Bar• Emptying with compressed air 1-2 bar• Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubesWARNING: Do not use with corrosive or inflammable products

NEW

Transmission JackFeatures include: • Pedal pump • Chrome plated extension rod• “Dead man” controls• Maximum height: 1970mm• Maximum weight: 300kg

38400000

NEWGearbox Cradle• Adjustable cradle for gearboxes up to 300kg• Twin adjustable screws allow for various gearbox orientations• Four adjustable side plates to fit and support gearboxes• Includes two collars to fit popular transmission jacks

38450000

NEWAccessories Box• Galvanised accessory box useful for storing press piece sets etc• Includes hanging hook

53451200

NEW15-20T Press Plate• Heavy duty plate sits on press bed with hole to push components through

53451000

NEW

15-20T Press Piece Set• Includes one adaptor & three press pieces • Sizes: 10, 18 and 24mm diameter

53451500

NEW

OFFER £99.00SAVE £16.00

LIST PRICE £115.00

30-50T Press Piece Set• Includes one adaptor & six press pieces • Sizes: 5, 10, 14, 18, 24 and 29mm diameter

53453000

OFFER £89.00SAVE £16.00

LIST PRICE £105.00

BAT

TER

Y C

AR

E

16

Tel:

0154

3 67

9900

A complete range of high quality Battery Booster Packs, covering a wide

variety of applications including: Automotive, Agriculture, Plant, HGV, Marine & AviationPro-Start booster packs are perfectly safe for the on-board electronics on modern vehicles and are compatible with Petrol, Diesel & Hybrid vehicles

Pro-Start Booster Packs Specifications:

Propulstation Booster Packs with Docking Station Specifications:

Part No. Description Voltage Cranking Amps

Peak Amps Price

861041SP SOS Booster 440 12v 440 1600 £165.95

861001SP Pro-Start 700 12v 700 1860 £275.00

861002SP Pro-Start 800 12v 800 2370 £355.00

761001SP Pro-Start Plus 1400 12/24v 1400/700 3720/1860 £650.00

761006SP Pro-Start Plus 1600 12/24v 1600/800 4740/2370 £860.00

Part No. Voltage Cranking Amps

Peak Amps Price

521001AC 12v AC 700 1860 £456.00

521001DC 12v DC 700 1860 £415.00

521002AC 12v AC 800 2370 £520.00

521002DC 12v DC 800 2370 £480.00

Pro-Start Booster Pack Features:• AGM internal batteries deliver high amperage instantaneously• Double insulated starting cables – 1.30 / 1.35 mtrs length• Illuminated voltmeter indicates booster charge level, booster & alternator function• Internal fuse protects against short circuits• Curved jaw clamps, fully insulated – blue clamp with LED lamp for safe use in the dark• Shock resistant, moulded case – (lifetime case warranty)

Propulstation Booster Pack with Docking Station Features:• The battery has an exceptionally high capacity to accumulate and disperse high-amperage energy. It uses pure lead plates and is an AGM (absorbed glass mat) type battery• Robust shell case design with 5mm shatterproof polyethylene• Long & flexible cables with double insulation offer a perfect resistance to extreme conditions• Robust, wide-opening clamps include copper trace carrying the current to the bronze jaws & protecting the powerful spring against over-heating

Propulstation Booster Packs complete with docking station eliminate the risk and frustration of an uncharged booster pack!• Always in the right place • Always charged 100% • 3 times longer lifetime

ALL UNITS HAVE LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY

Choose from:- AC Model - Supplied with mains AC charger for workshop / showroom use- DC Model - Supplied with 5m cable and one-way diode for connection to vehicle electrics (Ideal for recovery vehicles)

Part No. Rating Applications Accessories Included Price

845121SP 12 volts / 1 Amp Eyelets / Crocodile Clamps £35.00

845122SP 12 volts / 2 Amps Eyelets / Crocodile ClampsCigarette Lighter Plug £47.00

845124SP 12 volts / 4 Amps Eyelets / Crocodile Clamps Cigarette Lighter Plug £62.00

845127SP 12 volts / 7 Amps Eyelets / Crocodile Clamps Cigarette Lighter Plug £90.00

Extend your batteries’ lifetime with an Accu-Smart® Automatic Battery Charger • Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries • No need for handling or mode selection, the charger works automatically, without external intervention, therefore it is not necessary to disconnect the battery from the vehicle before charging it• Manages and regulates the charge of the battery, so can be left connected on the battery permanently• The Accu-Smart® charger restarts in case of a power cut and provides total protection against short-circuits, peaks of voltage (AC or DC), inversion of polarity and over-heating spikes


Transmission JackFeatures include: • Pedal pump • Chrome plated extension rod• “Dead man” controls• Maximum height: 1970mm• Maximum weight: 300kg

WO

RKS

HO

P TO

OLS

& E

QU

IPM

ENT

17

ww

w.s

ykes

-pic

kava

nt.c

om

EGR Valve Activator• For testing & cleaning valve as part of routine servicing - no need to remove valve from vehicle for use• Prevents the unnecessary replacement of EGR Valves• Actuates EGR Valves in a fixed open position for cleaning and in an open / closed sequence for freeing carbon deposits• Choice of two test cycles: At the end of either test cycle the tool gives an audible indication when a faulty and unserviceable EGR valve is connected• Supplied with x3 connectors for different makes of valves• Power Supply: 220 - 240V mains • Open / Close Time Cycle: 90 sec• Includes applications list - visit: www.sykes-pickavant.com for details

Scan the QR code to watch a video of the EGR Valve Activator

OFFER £189.00SAVE £10.95

LIST PRICE £199.95

Wireless Electronic Stethoscope Kit -“ChassisEAR”• Designed for the detection of vehicle noises e.g. rattles, squeaks and air ingress under load, during a road test and for the diagnosis of a wide variety of potential faults e.g. wheel bearings, CV joints, differentials, transmission, injectors, alternators, water pumps, AC compressors and many more• Can be used on cars, vans, trucks, buses etc as there are no cable length issues to overcome• Consists of Receiver Unit, 4 x Transmitter Units (4 channels), 4 pick-up leads, pick-up fixing straps, headphones, batteries, manual & storage caseN.B. Due care & consideration should be taken of driving conditions and regulations when operating the ChassisEAR™ on the road. £399.00

£69.95£69.95

Stud Remover & Installer Kit• Unique design allows the installation and removal of studs without damaging the threads• Suits all popular metric automotive studs• Each stud size has one tool for removal and one tool for installation• Installation tool allows tightening and torque without thread damage• Kit includes: - M6 x 1.0 / M8 x 1.25 / M10 x 1.25 / M10 x 1.50 studs

1/2” Impact Bar• For loosening rusted or seized bolts using impact force• Produces 8 x torque multiplication with each hammer blow• Use with impact sockets and driver bits• Bi-directional – use to loosen or tighten fasteners• Swivel head aids with operation in limited access situations• Impact absorbing composite handle

0225100088050000

30047500

30077500

WORTH

£239.95

NEW NEW

29 Pc. Alternator Free Wheel Pulley Set• Special set of Spline & Torx Socket Bits for the removal of free-wheel alternator pulleys• Locks the alternator, allowing the central locking bolt of the pulley to be released• Selection of 33 tooth reaction nuts and additional adaptors• Updated 29 piece set covers a range of popular applications • Applications list included - Visit www.sykes-pickavant.com for full details

OFFER £79.95SAVE £20.00

LIST PRICE £99.95

016795V2

£219.00

Universal Press Support Block• Universal Support for use with a workshop press• Easily press bearings on a wide variety of suspension arms• Three point contact guarantees a perfect, safe support• Adjustable height anvil bolts• Swivel element for added versatility

08770000

WO

RKS

HO

P EQ

UIP

MEN

T

18

Tel:

0154

3 67

9900

38680000

385800SP

Mechanical Coil Spring Compressor Workstation Universal piece of equipment for assembling & disassembling struts & coil springs• Standard workstation construction but with Heavy Duty Mechanical compression components in place of pneumatic parts• Allows for use where air supply is limited, restricted or unavailable i.e. Mobile use• High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring• Long main spindle achieves large 420mm of stroke – greater than our pneumatic workstations• Powered by easy access 19mm hex drive on top of tool direct onto main spindle and can be used with either hand tools or even impact air tools• Includes adjustable vice clamp as standard• Compatible with all other Sykes-Pickavant workstation standard jaws, brackets & accessories

£795.00

£429.00

UP TO 1600KG OF FORCE

Scan the QR code to watch a video of the suspension workstation range

UP TO 2452KG OF FORCE (AT 10 BAR)

Pneumatic Coil Spring Compressor Workstation - Extra Heavy Duty Model c/w FREE Mercedes Bracket SetUniversal piece of equipment for assembling and disassembling struts and coil springs• Suitable for cars, 4WD’s and light commercials that use McPherson strut type suspension systems• Front and side spring clamps designed for fast changeover using unique Brackets System• Fitted with Extra Heavy Duty Pneumatic Cylinder - Compression force (at 10 bar) = 2452 kg • Ideal for Extra Heavy Duty applications i.e. SUV’s, 4WD’s etc where full spring compression is required• Double-depth front plate for use on extra-long strut assemblies• Safety locking valves system – locks safety cage and prevents usage with cage open

FREE MERCEDES BRACKET SET (38480100)WORTH

£239.95UPPER BRACKET FOR MERCEDES A, B, C, E CLASS &

LOWER BRACKET FOR MERCEDES E CLASS WHEN YOU PURCHASE 385800SP

38480100

38480500

38480600 38480700

38480200

38480400

Mercedes BracketSet - A, B, C & E Class

Special BracketPorsche Cayenne / VW Touareg

Special BracketMercedes C Class(2010-)

Special BracketNissan Qashqai

Double DepthStrut Vice

Upper Jaw Set for High Compression Springs

£239.95

£99.95

£42.95

£179.95

£97.95

£117.95

Optional Accessories for use with Suspension Workstations

36600500Fuel Extractor / Retriever• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc• Operates from workshop compressed air (no risk of sparks)• Mobile 45-litre tank (on wheels)• Cleanly draws up or pushes out fuel due to a venturi system• Includes 2 anti-static ground cables, overflow line and 3 fuel probes• Emptying via the tank filler neck or fuel lines• Stainless steel

OFFER £1595.00SAVE £150.00

LIST PRICE £1745.00

Universal Press Support Block• Universal Support for use with a workshop press• Easily press bearings on a wide variety of suspension arms• Three point contact guarantees a perfect, safe support• Adjustable height anvil bolts• Swivel element for added versatility

Ratchet Pump Kit• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit (above) to generate faster flow • Easily engages with all 3/8” Dr. air ratchets• Retaining bracket holds pump during use for one-hand operation• Supplied in plastic case

£399.95

£99.95

£109.95

£199.95

DIE

SEL

BLE

EDIN

G &

FU

EL IN

JEC

TIO

N

19

ww

w.s

ykes

-pic

kava

nt.c

omDiesel Fuel System Bleeding KitMany modern diesel fuel systems are very difficult to self-bleed once the low pressure feed circuit has been opened to the atmosphere. The circuit may have been opened by removing the fuel filter or by a damaged feed pipe. The pump unit contained in the kit enables the user to generate suction by continually squeezing and releasing the hand pump to draw the air and fuel through the low pressure system.• Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system• Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall• Supplied in tinFeatures• Clear pipes for visability of air bubbles • Colour coded pipes for easy identification• High grade reinforced pipes (rated over 10 bar)• Pump incorporates one way valve for ease of use - i.e. just one hand requiredNote: Pipes are sold as a paired set. Hand pump is sold with connecting pipes and 10mm convertor pipe

Scan the QR code to watch a video of

the Diesel Fuel System Bleeding Kit

Diesel Fuel System Bleeding Kit - Master Kit• Master kit includes the Diesel Fuel System Bleeding Kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump• Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure - providing a cost saving solution• The pipes and gauge can also be used on petrol engines where applicable• Ratchet pump provides a greater flow for when faster bleeding is required - i.e on some Ford models• Supplied in foam in plastic case

Comprehensive Schrader Valve Test Set• Set of schrader type fuel port test adaptors which can be used with the fuel pressure gauge supplied in the Diesel Fuel System Bleeding Kit - Master Kit - above • Can be used to bleed air from the Schrader valve test port on specific vehicles - e.g. Saab• Schrader test ports are the preferred method of measuring fuel pressure on vehicles with fuel rails• Quicker and easier than breaking into fuel lines• Applications include: Alfa Romeo, BMW, Fiat, Ford, Jaguar, Land Rover, Mercedes, Mini, Saab, Vauxhall and Volvo

NEW

31467500

31467000

31467600

31485300

BR

AKI

NG

20

Tel:

0154

3 67

9900

Diesel Fuel System Bleeding Kit - Master Kit• Master kit includes the Diesel Fuel System Bleeding Kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump• Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure - providing a cost saving solution• The pipes and gauge can also be used on petrol engines where applicable• Ratchet pump provides a greater flow for when faster bleeding is required - i.e on some Ford models• Supplied in foam in plastic case


LIST PRICE £24.95

Vehicle Fluid Change Syringe - 200cc • Transparent design to easily view the fluid• Suitable for fluid suction and supply in vehicle service• Composite plastic resistant to brake fluid & antifreeze• 200cc capacity with quick disconnect tube

Flaremaster 2 - The Original Hand Held Automotive Brake Pipe Flaring Tool • Hydraulic power unit provides portable power for precision flaring• Quick-release chuck for positive engagement of the punch• Fast-turn coarse thread on hydraulic ram, for quick assembly• Locking bolt with swivel pin, for fast tightening• Enhanced bridge unit for greater strength• Inter-changeable die, held in place by magnets• Creates SAE & DIN single and double flares• Create full, or part sections of pipe, which can be trimmed, flared or spliced as required• Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage• Supplied in moulded plastic box

£584.95Automatic Brake Bleeder - 12vNow includes aluminium Euro cap - angled screw type• Compatible with ABS systems• 12v powering with reverse polarity warning• Includes pump with automatic shut off valve• Regulator from 0 to 3Bar• 5L reservoir with visible level and min level indication• Auto power OFF when min level reached• 12V power cable with jack (L: 4m)• Fluid cable for brake fluid with quick coupling system (Length: 4m)• Includes fluid collection bottle & European screw-on reservoir cap• Stainless steel body• Professional pump and regulator fittedModel specific caps also available - Ask for details

Brake Bleeder Cap - Starter Set• Starter cap bleeder set suitable for ‘343’ range of Electric Brake Bleeders• Precision engineered aluminium caps for the following applications: - New Ford Fiesta (34301000) - Nissan / Asian (Bayonet Type Cap) (34301100) - Euro Cap - Angled (Screw Type Cap) (34301400)• Full range of caps available - Contact Customer Services for details

OFFER £99.95SAVE £32.00

LIST PRICE £131.95

£11.95

NEWIndustrial Pump Sprayer - 1 Litre Includes adjustable brass spray head nozzle and viton seals• Industrial pump sprayer suitable for various chemicals e.g. detergents, solvents, brake cleaner and general cleaning agents*• Polythene body with pressure relief valve• Stainless steel piston rod

*Important: Before use, please check the compatibility of the product you wish to spray

34300100

34303000

66050400

03470000

Part Number / Description Size Contents List Price Save Offer

02725000Flaremaster2 Brake Pipe Flaring Tool

4.75mm, 3/16” brake pipes SAE & DIN single and double flares

Flaremaster2 £157.50 £28.00 £129.50

02725600Flaremaster2 Brake Pipe Flaring Tool

4.75mm, 3/16” & 6mm brake pipes SAE & DIN single and double flares

Flaremaster2 £187.50 £32.00 £155.50

02729500Flaremaster2 Flaring Kit

4.75mm, 3/16” brake pipes SAE & DIN single and double flares

Flaremaster2 / Brake Pipe Aid PlierTelescopic Tube Cutter (3-32mm) Pipe Deburring Tool (3.2-16mm)

£197.50 £34.00 £163.50

02729600Flaremaster2 Flaring Kit

4.75mm, 3/16” & 6mm brake pipes SAE & DIN single and double flares

Flaremaster2 / Brake Pipe Aid Plier Telescopic Tube Cutter (3-32mm) Pipe Deburring Tool (3.2-16mm)

£227.50 £38.00 £189.50

02729600

NEW

£299.95

£129.95

CO

OLI

NG

21

ww

w.s

ykes

-pic

kava

nt.c

om

331400V2

331595V2

33159700 33159800

3314500003195000

33165000

HGV Cooling System Pressure Test KitUpdated kit now includes additional caps covering DAF LF, Renault D Series, Caterpillar, Optare bus, MAN bus, Dart SLF and Agricultural vehicles• Contents: - High capacity metal bodied hand pump with 0 - 2.5 bar pressure gauge - Quick-Connect Hose Assembly - 10 x Reservoir & Radiator Pressure Caps• Dual Gauge measures in p.s.i and bar• Additional Pressure Caps available - refer to applications guide • Applications include: DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo

HGV Combustion Leakage Tester• Fast and accurate diagnosis of cylinder head gasket leaks• Quick connector for use with 33140000 and 331400V2 cap adaptors• Suitable for use with both petrol & diesel engines• Supplied with standard and sensitive reaction test fluid (250ml)

HGV Airline Adaptor & Pressure Gauge Assembly• To be used on larger cooling systems i.e HGV to speed up the pressurisation process using a tyre inflater• Includes pressure relief valve to prevent over-pressurisation• 30psi / 2 bar gauge• For use with 33140000 and 331400V2 cap adaptors

Speedfiller• Unique multi-fit cone for universal use• Also capable of connecting directly onto quick release cooling caps from 315, 316 and 317 Series kits using adaptor piece• For replacing the coolant after opening or draining the system• Eliminates airlocks during refilling through the use of vacuum

NEW UPDATED KIT

NEW NEW

‘315’ Series Cooling System Test Kit• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench

OFFER £235.00SAVE £54.95

LIST PRICE £289.95

OFFER £37.45SAVE £12.50

LIST PRICE £49.95

OFFER £69.95SAVE £10.00

LIST PRICE £79.95

Comprehensive applications listing provided with each kit

Cooling Cap Set - To update 33159500 Kit• Set of 5 additional cap adaptors to update original 33159500 - ‘315’ Series Cooling System Test Kit to present coverage• Applications include: BMW, Chevrolet, Mercedes, Mini, Saab & VauxhallNote: Full application details can be found on our website: www.sykes-pickavant.com

Cooling Cap Set - To update 331595V2 Kit• Set of 2 additional cap adaptors to update 331595V2 - ‘315’ Series Cooling System Test Kit above to present coverage• Applications include: BMW, Chevrolet, Mini, Saab & VauxhallNote: Full application details can be found on our website: www.sykes-pickavant.com

£84.95

£149.95

ENG

INE

TIM

ING

22

Tel:

0154

3 67

9900

07766100

0776620007766300

07755100

077523V2

07756100

Ford 1.0 SCTi ‘Ecoboost’ 3 Cylinder Petrol Engine Timing Kit• Ford Applications: Focus (‘12-), Fiesta (‘13-), B-Max (‘12-), C-Max (‘12-), Transit Connect (‘13-), Ecosport (‘13-), Grand C-Max (‘12-), Tourneo Connect (‘14-), Mondeo (‘14-), Transit Courier (‘14-)• Engine Codes: M1DA, M1JA, M1JE, M2DA, M2GA, P4JA, P4JB, SFJA, SFJB, XMJA, XMJB

VW Group 1.8L & 2.0L Petrol Engine Timing KitApplications:Audi: A3, A4, A5, A6, Q3, Q5, TT (‘08-)Seat: Altea/XL, Leon, Toledo, Exeo, Alhambra (‘08-)Skoda: Yeti, Octavia II/III, Superb II (‘08-)Volkwagen: Golf, Beetle, Jetta, Scirocco, Eos, Passat/CC, Tiguan, Sharan, Amorok (‘08-)1.8TFSi Engine Codes:CABD, CJEB, BYT, BZB, CDAA, CJSA, CDAB, CJSB, CABA, CDHA, CABB, CDHB2.0TFSi Engine Codes:CCZA, CDNC, CFPA, CNCD, CAWA, CCZB, CDND, CHHA, CPLA, CAWB, CCZC, CESA, CHHB, CPSA, CBFA, CCZD, CETA, CJKA, CCTA, CDNB, CFKA, CJKB

VW Group 1.0L 3 Cylinder Petrol Engine Timing KitApplications:Volkswagen: up! (‘11-)Skoda: Citigo (‘11-)Seat: Mii (‘12-)Engine Codes: CHYA, CHYB, CPGA

Renault Twin Cam 16v / Opel Vauxhall 2.0L / Dacia 1.6L / Nissan 1.6 & 2.0L Petrol Engine Timing Kit• Set of locking tools required for cam belt serviceApplications include:Renault: Avantime, Clio 2 & 3, Espace, Kangoo, Laguna, Logan, Megane, Modus, Scenic, Traffic, Twingo & Vel SatisOpel / Vauxhall: VivaroDacia: Duster, Logan, SanderoNissan: Kubistar & PrimastarNote: Full application details can be found on our website: www.sykes-pickavant.com

Ford 1.25 - 2.3L / Mazda 1.25 - 2.5L / Volvo 1.6, 1.8, 2.0L Petrol Engine Timing Kit• Set of locking tools enabling correct valve timing Applications include:Ford: Cougar, Fiesta, Focus, Fusion, C Max, Galaxy, S Max, Mondeo, PumaMazda: 2, 3, 5, 6, 121, MPV, MX5, TributeVolvo: C30, S40, S80, V50, V70Note: Full application details can be found on our website: www.sykes-pickavant.com

Seat / Skoda / Volkswagen 1.2L 6v/12v 3 Cylinder Petrol Engine Timing Kit• Set of locking tools required for chain maintenanceApplications include:Seat: Cordoba, Ibiza Skoda: Fabia 2, RoomsterVolkswagen: Fox, Polo IV / VNote: Full application details can be found on our website: www.sykes-pickavant.com

NEW

NEW NEW

OFFER £375.95SAVE £77.00

LIST PRICE £452.95

OFFER £189.00SAVE £46.00

LIST PRICE £235.00OFFER £114.95SAVE £24.00

LIST PRICE £138.95

OFFER £53.95SAVE £11.00

LIST PRICE £64.95

OFFER £57.95SAVE £12.00

LIST PRICE £69.95


LIST PRICE £19.95

‘315’ Series Cooling System Test Kit• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench

LATEST VEHICLE COVERAGE

Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United KingdomTel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: [email protected] www.sykes-pickavant.com

A NEW RANGE OF PROFESSIONAL SERVICE STATIONS TO PROVIDE A QUICK AND EFFICIENT WAY OF SERVICING FLUID SYSTEMS

ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 31ST MARCH 2015 - REF: SPQ115GBPCOPYRIGHT 2015 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.

Distributor Stamp:

NEWNEWERVICE RO EQUIPMENT RANGE

Includes comprehensive adaptor set

£1995.00£3495.00

£995.00

£1749.00

53401500Fortron Coolant Flush Machine• Suitable for all types of coolants and vehicles• Includes a set of multi-application adaptor fittings• Effective way of flushing and exchanging the complete cooling system fluid• Air operated and portable

53402500Fortron Automatic Transmission Fluid Flush Machine - Fully Auto• Can replace up to 100% of transmission fluid• Ability to specify exact amount of fluid to change• Fully automatic and user friendly safe• Includes comprehensive adaptor set and Flush Service Kit• Safely cleans up and extends the service life of automatic transmissions

53403500Fortron Injector Max Machine• Suitable for petrol and diesel engines• Cleans the complete fluid systems without disturbing / removing any key components• Includes comprehensive adaptor set and Injector Max Fluids - Petrol & Diesel• Air operated

53404500Fortron Power Steering Flush Machine• Replaces 100% of steering fluid• Takes on average 10 minutes per service• Extends the service life of (often overlooked) system• Revitalises and conditions ‘o’ rings and seals• Portable, sturdy design• Includes Power Steering Flush Service Kit

£11.49

53403600 53403700Injector Max Premix Solvent - Petrol

Injector Max Premix Solvent - Diesel

£11.49

£17.99 £17.99

53402600ATF Flush Service Kit• Includes bottle of Automatic Transmission Flush and tube of Auto Trans & Power Steering Concentrate

53404600Power Steering Flush Service Kit• Includes bottle of Power Steering Flush and 50ml tube of Auto Trans & Power Steering Concentrate

Sykes-Pickavant Q1 - Jan - March 2015 Promo Brochure

Documents

Transcript of Sykes-Pickavant Q1 - Jan - March 2015 Promo Brochure