Sykes-Pickavant Q3 - July - Sept 2014 Promo Brochure

NEW PRODUCTS& SPECIAL OFFERS

www.sykes-pickavant.com

Specialist Tool Solutions

Proudly Supports

www.breakthrough.org.uk

INCLUDES LAND ROVER TOOLS, BRAKING, SUSPENSION, DIESEL BLEEDING, INJECTOR REMOVAL & MORE!

JULY - SEPTEMBER 2014

SUSP

ENSI

ON

1

ww

w.s

ykes

-pic

kava

nt.c

om 12 Tonne Hydraulic Ball Joint SeparatorUpdated kit now uses power from the SP 12 tonne hydraulic ram• Hydraulic version of the 08070000 HGV Ball Joint Separator • Specification:- Jaw Opening: 70mm- Jaw Throat Width: 36mm - Jaw Throat Depth: 50mm

08780000

08790000

08797500

08795000

Universal Press & Pull Sleeve Kit - Car / LCV Kit• Universal applications - Car - LCV • Contains 20x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 34 - 72mm• Outside Diameter Range: 44 - 82mm• 4x Step Plates / 4x Pulling Spindles with thrust bearings• Supplied in moulded storage case

Universal Press & Pull Sleeve Kit - SUV / LCV• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above)• Allows access to a wider range of vehicles, particularly SUV’s and LCV’s• Contains 8 x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 82 - 88mm and 98 - 104mm• Outside Diameter Range: 92 - 98mm and 108 - 114mm• 4 x Step Plate Discs• 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20

Universal Press & Pull Sleeve Kit - Commercial Vehicle• Complete kit for SUV, LCV, PSV, HGV• Contains 20x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 74 - 112mm in 2mm steps• Outside Diameter Range: 84 - 122mm in 2mm steps• 4x Step Plate Discs / 4x Pulling Spindles with nuts & thrust bearings M10 / M12 / M14 / M16• 2 x 20mm Heavy Duty Pulling Spindles (M20 long & M20 short) with thrust bearings

Upgrade Kit - From 08790000 to 08797500• Upgrade kit from 08790000 to complete 08797500• For owners of kit 08790000 (SUV / LCV - left) who wish to upgrade to the full contents of the combined LCV / HGV Kit (08797500 - below)

OFFER £675.00SAVE £150.00

LIST PRICE £825.00

OFFER £1150.00SAVE £245.00

LIST PRICE £1395.00

OFFER £475.00SAVE £110.00

LIST PRICE £585.00

OFFER £219.95SAVE £70.00

LIST PRICE £289.95

Scan the QR code to watch an overview video of

Suspension Removal & Installation Tools

08070000180700V2

Ball Joint Separator – HGV applications• Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied• Can be upgraded to hydraulic power • Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm

OFFER £115.95SAVE £24.00

LIST PRICE £139.95

OFFER £379.00SAVE £166.00

LIST PRICE £545.00

UPDATED KIT

SUSP

ENSI

ON

2

Tel:

0154

3 67

9900

08756000

Ford Transit Ball Joint Tool• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013• On vehicle solution provides time saving benefits• Tool designed to access the awkward location of the ball joint• Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram• Hydraulic option includes 12 Tonne SP hydraulic ram

Ford Transit Bearing Press KitSuccessful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press• Removes and installs bearings on both 5 and 6 stud hubs• Removes the inner and outer bearing raceContents include:- Hub support for new bearing installation- 5 x supporting pillars and stand for bearing removal- 2 x adaptors for insertion and removal- Special separator for inner ring removal

082545V2Ford Transit Hub & Front Wheel Bearing Remover KitUpdated kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits• For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal• Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool• Provides three different solutions in one kit: - Can be used as a traditional hub puller - Remove the stubborn inner bearing race - Use the slide hammer in the reverse direction to remove the outer bearing race

£375.00

£74.95

£199.00

£99.95

3 IN 1 TOOL

ON CAR SOLUTION

NEW

NEW

08255000Ford Transit Press Upgrade Kit• Set of tools to enable the 08254500 and 082545V2 kit (above) to be used in a workshop press • Suitable for use on Ford transits 2000-2013• Removes and installs bearings on both 5 and 6 stud hubs• Removes the inner and outer bearing raceContents include:- Hub support for new bearing installation- 5 x extra long supporting pillars and stand for bearing removal- 2 x adaptors for insertion and removal

NEW

UPDATED KIT

08255500

Ford Transit Hub & Front Wheel Bearing Remover - Upgrade Kit• Includes larger hub plate and extra-long pillars enabling owners of the 08254500 kit to remove hubs and front wheel bearings on six stud Transits

NEW

Part No. Description Price

08256000 Manual Option £169.00

18256000 Hydraulic Option £249.00

*Note - Hydraulic ram included in 18256000 only

Hub RemovalInner BearingRace Removal

Outer Bearing Race Removal

MADE IN THE UK

SUSP

ENSI

ON

3

ww

w.s

ykes

-pic

kava

nt.c

om087304V2

18780400

18700100

18704100

Ford & Volvo Rear Bush Tool KitNow capable of installing and removing the longer bush fitted onto the nearside of recent Volvo cars• Individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush• Correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush• Suitable for: - Ford: Mondeo ‘07-, Mondeo Estate ‘00 - ‘07, S-Max & Galaxy ‘06-- Volvo XC70 & V70 ‘07- / Volvo XC60 ‘08- / Volvo S60 & V60 ‘10-For a full applications list, please visit ourwebsite - www.sykes-pickavant.com

Adaptor Ring• Ring sits in press frame to hold adaptors in place

Universal Press Frame• Includes adaptor ring (18780400) for use with 08780000 and related press piece sets• Can also be used with 8 or 12 Tonne SP hydraulic ram and press frame pressure screw

Press Frame Pressure Screw• To be used in press frame instead of ram for faster operation where greater travel is required to remove / install bushes• The screw has a fine thread and roller bearing for ease of use

Fiesta & Focus Master Bush Kit including Press Frame & Pressure Screw• Kit includes adaptor set for the removal and installation of trailing arm bushes, 18700100 Press Frame and 18704100 Pressure Screw• Bush OEM reference numbers: Fiesta - 1011363, 1016439, 96FB5K653CA Focus - 1 061 670, 1304124

Focus Applications: - C-MAX ‘07- MPV- MKI ‘98-’04 Estate, Hatchback, Saloon, Van- MKII ‘04- Convertible, Hatchback, Saloon, Van- Kuga ‘08- Off Road- Mazda 3 (BK) ‘03-’09 Saloon, Hatchback- Mazda 5 (CR/CW) ‘05- MPV- Volvo C30 ‘06- Hatchback- Volvo C70 II ‘07- Cabrio - Volvo S40 II ‘04-’12 Saloon- Volvo V50 ‘04-’12 Estate

ON CARSOLUTION

NEW

NEW

UPDATED KIT

OFFER £165.00SAVE £34.00

LIST PRICE £199.00

Part No. Description Price

18732500Kit includes Adaptor Set for Fiesta & Focus Bushes, 18780400 Adaptor

Ring and 18704100 Pressure Screw £299.00

18732100* Adaptor Set for Fiesta Trailing Arm Bushes £99.00

18732200* Adaptor Set for Focus Trailing Arm Bushes £99.00

Available Options

18732000

Fiesta Applications:- Fiesta ‘95-’02 - KA ‘96-’08- Puma ‘96-’02

18732200 - Focus Adaptors18732100 - Fiesta Adaptors

Adaptors in the following kits can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram

MADE IN THE UK

OFFER £375.00SAVE £20.00

LIST PRICE £395.00

£399.00

£94.95

£19.95

*Note - Adaptor Ring 18780400 required

LAN

D R

OV

ER

4

Tel:

0154

3 67

9900

Ford & Volvo Rear Bush Tool KitNow capable of installing and removing the longer bush fitted onto the nearside of recent Volvo cars• Individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush• Correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush• Suitable for: - Ford: Mondeo ‘07-, Mondeo Estate ‘00 - ‘07, S-Max & Galaxy ‘06-- Volvo XC70 & V70 ‘07- / Volvo XC60 ‘08- / Volvo S60 & V60 ‘10-For a full applications list, please visit ourwebsite - www.sykes-pickavant.com

Universal Press Frame c/w 12 tonne Hydraulic Ram• Updated unit now provides greater power• Open frame design - 200mm of clearance through the press frame• Includes adaptor ring (18780400) for use with 08780000 and related press piece sets• Ideal for use with individual model specific press piece sets

18775100

Land Rover Swivel Ball Joint Kit• A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002• Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution (Inc in 18771100 only)• Designed, tested and manufactured in Great Britain

Land Rover Bush KitSykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models• For radius arm, panhard bushes and general suspension bushes• Dedicated shaped press pieces for correct location and alignment• Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers

Multi-application Step Plate• New single piece stepped press frame plate• Allows for many different sized press pieces to fit positively into the frame for precise work

NEW

187000V2

OFFER £245.00SAVE £54.00

LIST PRICE £299.00

Part No. Description List Price Save Offer Price

18771000 Adaptor Set only £199.95 - £199.95

18771100Adaptor Set plus Press Frame,

Adaptor Ring & Ram£498.95 £54.00 £444.95

18771200Adaptor Set plus Press Frame

& Adaptor Ring£398.95 £34.00 £364.95

Part No. Description Contents Price

18775000 Land Rover Bush Press KitKit includes 6 Adaptor Pieces for use in a workshop press with suspension parts removed from vehicle £139.00

18775500* Land Rover Bush Kit Press Frame Option

Kit includes 6 Piece Adaptor Set, 18775100 step plate,press frame, adaptor ring & 12 Tonne SP hydraulic ram £429.95

18775600* Land Rover Bush Kit Press Frame Only Option

Kit includes 6 Piece Adaptor Set, 18775100 step plate,press frame & adaptor ring, for customers who already have an SP hydraulic ram

£359.95

18775700 Land Rover Bush Kit C Clamp Option

Kit includes 6 Piece Adaptor Set, 18775100 step plate &C Clamp for minimal vehicle strip-down £534.95

NEW

Available Options

Available Options NEW

*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp

MADE IN THE UK

£29.95

LAN

D R

OV

ER

5

ww

w.s

ykes

-pic

kava

nt.c

om

OFFER £49.95SAVE £15.05

LIST PRICE £65.00

£169.95

£49.95

314285V2

085700V2

Diesel Engine Compression Test Kit - Land RoverUpdated kit now includes NEW TD5 Compression Tester• Comprehensive test kit for Land Rover diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Contents: (Supplied in box and foam) - 0-60 bar pressure gauge and 4 x Glow Plug adaptors • Applications include: - Defender MK2 & MK3, Discovery 2, 3 & 4, Range Rover Sport & Range Rover 3, Freelander 1 & 2 and Evoque • Other adaptors for older Land Rovers are also available on request

Diesel Injector PullerSuitable for Discovery 1, Defender and older Series Land Rovers• For use with Lucas & Bosch type clamp-down injectors• Slide hammer mechanism c/w M8, M12 & M14 adaptors• Universal tool with a wide variety of Car, LCV & HGV applications • Includes M17 adaptor for GM Vauxhall / Opel injectors (X20DTH / Y20DTH series engines)

AVAILABLE AUGUST31469000

Premier Low Pressure Fuel Test Kit• A comprehensive high quality OEM standard low pressure diesel and petrol pressure kit• Includes: - Shock protected, fuel resistant dual scale gauge - to 10 bar / 145psi - Relief valve for safe de-pressurisation - Vacuum gauge assembly - Fuel tap and T-connector assembly - Quick-coupling adaptors and connectors with reinforced hoses and brass fittings - 4 x Schrader valve connectors• Latest fittings for Jaguar Land Rover variant engines• Supplied with easy to follow fitting / application instructions• Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Ferrari, Fiat, Ford, GM, Jaguar, Land Rover, Mercedes, Mini, Peugeot, Renault, VW and Volvo

NEW

UPDATED KIT

03860000

OFFER £26.95SAVE £7.55

LIST PRICE £34.50

Strap Type Oil Filter Remover - For all filters up to 300mm diameter• Multi-purpose polyester strap wrench with strong steel shank• Range: 20 to 300mm diameter• Strap Length: 1 metre long & 40mm wide• Strong steel shank and polyester strap• Self tightening band designed for fast and secure filter removal• Double ended 13/16” hex c/w 3/8” & 1/2” sq. dr

£449.00

31424700Land Rover TD5 Compression TesterThe only tool available to fully test the compression of all 5 cylinders• For use with existing Sykes-Pickavant compression test kits to measure cylinder compression on 5 cylinder diesel Land Rover TD5 engines made between 1998 & 2005• Unique tool that fits in place of original high pressure fuel injector - not the glow plug• Original injector clamps hold adaptor tightly in place to create gas tight seal

NEW

LAN

D R

OV

ER

6

Tel:

0154

3 67

9900

£295.00

Premier Low Pressure Fuel Test Kit• A comprehensive high quality OEM standard low pressure diesel and petrol pressure kit• Includes: - Shock protected, fuel resistant dual scale gauge - to 10 bar / 145psi - Relief valve for safe de-pressurisation - Vacuum gauge assembly - Fuel tap and T-connector assembly - Quick-coupling adaptors and connectors with reinforced hoses and brass fittings - 4 x Schrader valve connectors• Latest fittings for Jaguar Land Rover variant engines• Supplied with easy to follow fitting / application instructions• Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Ferrari, Fiat, Ford, GM, Jaguar, Land Rover, Mercedes, Mini, Peugeot, Renault, VW and Volvo

OFFER £249.95SAVE £50.00

LIST PRICE £299.95

OFFER £239.95SAVE £55.05

LIST PRICE £295.00


LIST PRICE £22.95

NEWNEW

OFFER £89.95SAVE £20.00

LIST PRICE £109.95

0776100007766000

Land Rover Freelander 2.5 Petrol Engine Timing Kit• Set of locking tools required for cam belt service• Applications: Land Rover Freelander 2.5 (‘00-’06)• Engine Code: 2.5 - KV6

Land Rover 2.5D TD5 Diesel Engine Timing Kit• Set of pins required for correct valve timing on chain driven engines• Applications: Land Rover Defender (‘99-’07), Land Rover Discovery II (‘98-’04)• Engine Codes: 2.5D TD5 - 10P, 15P• OEM Reference: LRT 12-058, LRT 12-158, 303-875, 303-960

05050000

08128500

Land Rover Drop Arm Puller• Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications• Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications• The puller is designed to be used with the steering box already removed from the vehicle• Includes a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box• Jaw spread capacity - 60mm • Jaw reach capacity - 80mm

GEN2 82mm Bearing Removal Combination Tool Kit for Ford / Land Rover & Volvo models• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings• Applications: Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70

OFFER £195.00SAVE £4.00

LIST PRICE £199.00

Scan the QR code to watch a video

of the Land RoverDrop Arm Puller

NEW07763000

07754200

Land Rover 4.2 / 4.4 Petrol Engine Timing Kit• Set of locking tools required for correct valve timing on chain driven engines• Applications: Land Rover Discovery 3 (‘04-), Land Rover Range Rover (‘05-), Land Rover Range Rover Sport (‘05-), Jaguar S-Type (‘99-), Jaguar XF (‘08-) Jaguar XJ8 / XK8 (‘97-) and Jaguar XKR / XJR (‘98-)

Land Rover 2.7TDV6 Diesel Engine Timing Kit• Set of locking tools required for cam belt service• Two additional pieces not included in competitor kits• Applications: Land Rover Discovery 3 (‘04-), Land Rover Discovery 4 (‘09-), Land Rover Range Rover Sport (‘05-), Jaguar S Type (‘04-), Jaguar XF (‘08-), Jaguar XJ6 (‘05-), Peugeot 407 & 607 (‘04-), Citroën C5 lll (‘07-) and Citroën C6 (‘05-)

DIE

SEL

BLE

EDIN

G

7

ww

w.s

ykes

-pic

kava

nt.c

om31467500

PneumatiVac Fluid Evacuator• Works effectively with 31467500 and 31467000 kits (above) for vehicles that need to have diesel drawn back up to the engine from the fuel tank after service work• Operates on compressed air to create a powerful vacuum for bleeding the most difficult of vehicles• 9ltr capacity reservoir to ensure all the air is removed from the fuel suction system• Includes an adaptor to connect to bleed kit• Automatic shut-off prevents accidental over-filling• Compressed air connection on base for stability, with independent air shut-off valve• Special features: - Improved gasket design ensures air tight seal for vacuum / pressure - Self-locking retaining nuts ensure the lid remains securely clamped to prevent pressure / vacuum leaks - Overflow shut-off valve with threaded connection• Supplied with evacuation dipstick tubes and adaptors• Can also be used for extracting: - Engine Oil / Transmission Fluid / Gear Oil / Brake Fluid / Power Steering Fluid and Coolant

Diesel Fuel System Bleeding KitMany modern diesel fuel systems are very difficult to self-bleed once the low pressure feed circuit has been opened to the atmosphere. The circuit may have been opened by removing the fuel filter or by a damaged feed pipe. The pump unit contained in the kit enables the user to generate suction by continually squeezing and releasing the hand pump to draw the air and fuel through the low pressure system.• Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system• Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall• Supplied in tinFeatures• Clear pipes for visability of air bubbles• Colour coded pipes for easy identification• High grade reinforced pipes (rated over 10 bar)• Pump incorporates one way valve for ease of use - i.e. just one hand required

Note: Pipes are sold as a paired set. Hand pump is sold with connecting pipes and 10mm convertor pipe

NEW

NEW

31467600

Ratchet Pump Kit• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit (above) to generate faster flow • Easily engages with all 3/8” Dr. air ratchets• Retaining bracket holds pump during use for one-hand operation• Supplied in plastic case

NEW

31467000Diesel Fuel System Bleeding Kit - Master KitAs per 31467500 kit above but includes: - T-piece and gauge for diesel low pressure side testing utilising the same pipes - Ratchet pump kit for faster bleeding• Supplied in foam in plastic case

£399.00

£99.00

£165.00

£199.00

MV7300SP

CO

MPR

ESSI

ON

& P

RES

SUR

E TE

STIN

G

8

Tel:

0154

3 67

9900

314650V2

314660V231405000

314200V2

31470000

31427500

Common Rail Diesel (CRD) High Pressure Test KitUpdated kit now includes unique pressure limiting valve in-built to prevent extreme pressures building in test kit during engine cranking• Measures delivery pressure output from the CRD (Common Rail Diesel) High Pressure pump under engine cranking conditions• Cranking test to show a “healthy” 250+ Bar output, gauge reads up to 600 Bar. Tell-tale needle shows maximum pressure achieved during cranking test• High pressure test gauge allows direct connection to the high pressure pump, providing cranking pressure measurement of the pump• Electronic sensor tester reads and displays the high pressure signal from the actual high pressure sensor output point – allowing comparison to a code readers displayed data• Measures common rail pressure via the vehicles electronic pressure sensor with engine running• M12 x 1.5 & M14 x 1.5 connections• Includes shaped high pressure connector pipes (x5) to connect and cover many applications• Supplied in a plastic case

Common Rail Diesel (CRD) High Pressure Test Set• As per 314650V2 kit above excluding electronic sensor tester• Includes high pressure gauge with tell-tale needle, shaped high pressure connector pipes x5, M12 x 1.5 & M14 x 1.5 connections • Supplied in a plastic case

Petrol Engine Compression Tester • Specially designed for deep seated spark plug ports with long narrow threads, as found on many modern petrol engines• Positive lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port (which would then become extremely difficult to remove with deep seated plug ports)• Specially designed self-centering adaptors ensure minimal risk of cross threading when attempting to screw the compression adaptor in to the spark plug port• Supplied in plastic case with foam insertSpecification:• Gauge Scale: 0 - 20bar, 0 - 190psi • Gauge Diameter: 83mm

Diesel Engine Compression Test Kit - Standard Car Kit• For both direct and indirect diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy injector and glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Supplied in plastic case with foam insertSpecification:• 560mm Rubber Hose• Gauge Scale: 0-60bar, 0-860psi• Gauge Diameter: 83mm

Oil Pressure Test Kit• Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators• Shock protected dual scale gauge, for quick & accurate oil pressure checks• Permanently oil primed, 1m long flexible hose, enables access to difficult to reach oil switch ports• Small profile, quick coupling adaptors with built-in shut-off valve• 10 x oil switch port adaptors• Supplied in plastic case with foam insert• Gauge Scale: 0 - 10bar, 0 - 150psi• Gauge Diameter: 80mm

Diesel Engine Compression Test Kit - Common Rail Diesel (CRD)• Covers a wide range of modern CRD diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy injector and glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Supplied in plastic case with foam insert• Contents: - Gauge & Hose Assembly - 15 x Dummy Glow Plugs - CRD Dummy Injector & Clamps

OFFER £156.50SAVE £18.50

LIST PRICE £175.00

OFFER £375.00SAVE £20.00

LIST PRICE £395.00

OFFER £215.00SAVE £30.00

LIST PRICE £245.00

UPDATED KIT

UPDATED KIT

OFFER £169.95SAVE £10.05

LIST PRICE £180.00

£549.95

£399.00

GLO

W P

LUG

& S

PAR

K PL

UG

9

ww

w.s

ykes

-pic

kava

nt.c

om085930V2SP

085900V2

03341600

01513500

01419000

Glow Plug Removal Kit c/w FREE GlowPlug Socket SetUpdated kit now includes additional parts - 6 x extractor sockets - 1 x dual size high tensile step drill - 1 x narrow pulling unit set - 1 x drill holder extension - 2 x taps - 2 x drill bits - 2 x glow plug chamber cleaning brushes• For removing damaged and broken glow plugs from cylinder heads • Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head• Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread)• Comprehensive kit includes all necessary adaptors, centering and thread cleaning tools to safely remove the damaged glow plug without damaging the cylinder head • Supplied in case with foam

Vibro Impact Glow Plug Remover Kit• For the safe, effective removal of 8, 9, 10, 11 & 12mm glow plugs• Uses controlled impact torque to create vibration in order to loosen seized glow plugs• The Vibro-Impact tool ‘loosens’ the seized glow plug, making it safe and easy to remove without the risk of broken plugs, and / or damaged cylinder heads• Includes 4 low-torque settings for controlled vibration (10, 20, 30, 40Nm)• Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access

Magnetic Extra Long Slim Spark Plug Socket - 14mm• 250mm Long Bi-Hex 3/8 Sq Dr• For deep-seated spark plugs as found on: Citroën, Mini, Nissan, Peugeot and Toyota vehicles• Ideal for use on Bi-Hex spark plugs

Electronic Diesel Injector Removal Socket Set• Hexagonal socket set for removal of the electrical solenoid from modern diesel injectors• 1/2” sq dr. x 78mm length• In most cases, it is necessary to remove the solenoid before attempting to remove the injector body• Includes 4 x sockets: 25, 27, 29 & 30mm Hex

Glow Plug & Spark Plug Thread Recovery Set• For the repair of plug threads within the cylinder head• Repairs thread from the bottom, to minimise the risk of debris entering the engine• Made from hardened and tempered steel• Contents: (all sizes have hex drive) - M8 x 1.00 – 117mm length - M10 x 1.0 – 117mm length - M12 x 1.25 – 140mm length - M12 x 1.25 – 268mm length - M14 x 1.25 – 140mm length - M14 x 1.25 – 268mm length - M18 x 1.50 – 89mm length

UPDATED KIT

Square Drive ¼”Max Torque - Right 40NmMax Torque - Left 10 / 20 / 30 / 40Nm

Air Inlet ¼”Air Consumption 250 ltrs / min

Speed 12,000 per minAir Supply 6.3bar / 90psi

OFFER £199.95SAVE £49.05

LIST PRICE £249.00

OFFER £215.00SAVE £44.00

LIST PRICE £259.00


LIST PRICE £19.95OFFER £57.95

SAVE £12.00LIST PRICE £69.95

OFFER £125.00SAVE £34.50

LIST PRICE £159.50

FREE GLOW PLUG SOCKET SET WHEN YOU PURCHASE 085930V2SPWORTH £18.95• For gaining access to the glow plug where the cable restricts access• 8mm / 9mm / 10mm sockets• Apps include: Alfa, Fiat, Saab, Vauxhall / Opel - also some PSA models

08593500

DIE

SEL

INJE

CTO

R R

EMO

VAL

10

Tel:

0154

3 67

9900

Electronic Diesel Injector Removal Socket Set• Hexagonal socket set for removal of the electrical solenoid from modern diesel injectors• 1/2” sq dr. x 78mm length• In most cases, it is necessary to remove the solenoid before attempting to remove the injector body• Includes 4 x sockets: 25, 27, 29 & 30mm Hex

08551000 01745000

08565000

08581000

017500V2

08581500

1.3 Common Rail Twin Injector PullerAttachment• Enables two injectors to be removed at the same time as shared injector clamp hinders removal of injectors individually• Suitable for use with 08585000 HD Slide Hammer Injector Removal Kit - see below and 185800V2 Hydraulic Injector Puller Kit• Commonly found on 1.3 engines: Alfa: Mito, Fiat: 500 / C, Doblo / Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Punto Evo, Qubo, Strada, Ford: Ka, Lancia: Musa, Ypsilon, Opel: Agila, Astra H, Corsa D, Meriva, Vauxhall: Astra MK V, Corsa MK III and Meriva

Universal Injector Seat Cleaner Set• Designed to clean the injector holes after extraction work• Kit includes: - 20mm & 25mm metal brushes for injector hole cleaning - 2 x front brushes for injector seat cleaning - 1 x front brush extension - 1 x seal plug to close the injector hole while cleaning - 1 x seal plug holder to place and remove the plug - 1 x sanding kit

Combined FSI / PD / Common Rail Injector Puller & Service Tool Kit for VW Group • Designed for the quick and safe extraction of injection nozzles and unit injector (PD) elements from diesel engines• Suitable for VW, Audi, Seat and Skoda with direct injection engines and engines with pump-injector units• For assembling and removal of FSI injectors• Equivalent to VW OEM T10133 + T10163 • Knurled grips on the puller & assembling tools

Diesel Injector Washer Extractor• Designed specially to remove the copper injector base seal when it has become stuck in the cylinder head• Traditionally done using a ‘pick’ – this tool allows safe and easy removal without risk of damage to the head• Simple to use – utilises SP’s well known “split collet” technology to grip the seal and allow it to be pulled out from the head• Simple adjustment – expands from 6.5mm to 8.0mm

Diesel Injector Seat Cleaner Set• Cleans injector seats and chambers when changing or reconditioning diesel injectors• Helps to avoid blow-back due to poorly seated injectors• Now includes: - Removal tool for copper washers - Injector blanking plugs to avoid debris entering the cylinders - Wire brush cleaning set for chamber walls - Centralising stem to improve correct cleaning seating angle

Heavy Duty Diesel Injector Washer Extractor• Tapered threaded rod with slide hammer, for retrieving washers from the injector seat once the injector has been removed• Suitable for both modern common rail applications and older applications• 350mm length – 500gm slide hammer weight• The tapered threaded end is screwed into the washer which is stuck in the injector seat• Once the washer ‘bites’, the tool is then used as a slide hammer to remove the washer• Ideal for use when carbon deposits have completely enclosed the injector seat washer

OFFER £74.95SAVE £15.00

LIST PRICE £89.95OFFER £49.95


OFFER £99.95SAVE £25.05

LIST PRICE £125.00

OFFER £55.00SAVE £14.95

LIST PRICE £69.95

OFFER £55.00SAVE £14.95

LIST PRICE £69.95

NEW

NEW

08585000Heavy Duty Slide Hammer Injector Remover Kit• For removal of Bosch, Delphi, Denso and Siemens injectors• Features a flexible u-joint adaptor for access in restricted areas• Contains: - 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, M20 x 1.0, M25 x 1.0, M27 x 1.0 - 4 x Injector Solenoid removers: M25, M27, M29, M30 - 2 x Nozzle Extractors: 6mm & 7mm Tamperproof: 10mm hex • Heavy Duty Slide Hammer - Hammer Weight: 5.0kg (Total Weight: 8.0kg) • Supplied in blow-moulded case

OFFER £245.00SAVE £50.00

LIST PRICE £295.00

OFFER £175.00SAVE £44.00

LIST PRICE £219.00

TOR

QU

E

11

ww

w.s

ykes

-pic

kava

nt.c

om

80093500

Universal Digital Torque Angle Gauge• For turning torqued fasteners through a further angle, as per vehicle manufacturers’ specifications• Simple to use: Calibrate, set angle, mount and use• Fits onto most ratchets, torque wrenches and power bars• Magnetic attachment • One single tool can be used on 1/4”, 3/8”, 1/2”, 3/4” drives• Indicates increasing angle on LCD display• Works in both directions of rotation• LED’s glow yellow when close to setting and change to green when desired setting is reached• Audible notice when setting reached• LED’s glow red when setting exceeded


of the Universal Digital Torque Angle Gauge

OFFER £99.95SAVE £50.00

LIST PRICE £149.95

OFFER £134.95SAVE £37.55

LIST PRICE £172.50

OFFER £124.95SAVE £32.00

LIST PRICE £156.95

OFFER £114.95SAVE £27.80

LIST PRICE £142.75

OFFER £99.95SAVE £25.05

LIST PRICE £125.00

OFFER £99.95SAVE £25.05

LIST PRICE £125.00

OFFER £74.95SAVE £30.00

LIST PRICE £104.95

‘Motorq 20’ - 3/8” Push-Thru Torque Wrench80002000

• 3/8” push thru sq dr• 4 - 20 Nm / 3 - 15lbs.ft • Length: 210mm• Weight: 0.40kg



‘Motorq 200’ - 1/2” Push-Thru Torque Wrench 80020000

• 1/2” push thru sq dr• 40 - 200 Nm / 30 - 148lbs.ft • Length: 455mm • Weight: 1.00kg

‘Motorq 300’ - 1/2” Push-Thru Torque Wrench 80030000• 1/2” push-thru sq dr• 60 - 300 Nm / 44 - 221lbs.ft • Length: 570mm • Weight: 1.40kg



‘Motorq 330’ - 1/2” Push-Thru Torque Wrench 80033000• 1/2” push-thru sq dr• 60 - 330 Nm / 44 - 243lbs.ft • Length: 690mm• Weight: 1.40kg

TOR

QU

E

12

Tel:

0154

3 67

9900

Part No. Ratio Input Drive Max. Input

Output Drive

Output Range Weight Price

80060000 5:1 1/2” sq.dr. / 32mm hex 260Nm 3/4” 130 - 1300Nm 4.3kg £643.00

80065500 5:1 3/4” sq.dr. / 36mm hex 540Nm 1” 270 - 2700Nm 4.5kg £643.00

Features include:• Single stage epicyclic gears, producing a 5:1 multiplication ratio• Use with conventional torque wrenches for heavy duty applications• Supplied with reaction bars, in plastic storage case

‘Motorq’ Heavy Duty Torque Multipliers

OFFER £199.50SAVE £44.00

LIST PRICE £243.50

OFFER £356.95SAVE £36.05

LIST PRICE £393.00

OFFER £359.95SAVE £42.05

LIST PRICE £402.00

OFFER £569.95SAVE £33.05

LIST PRICE £603.00

‘Motorq 399’ - 3/4” Push-Thru Torque Wrench 80039900• 3/4” push-thru sq dr• 80 - 400 Nm / 59 - 295lbs.ft • Length: 690mm• Weight: 2.10kg

‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench 80040000• 3/4” push-thru sq dr• 150 - 700 Nm / 110 - 516lbs.ft • Length: 1090mm• Weight: 6.00kg

‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench 80050000• 3/4” push-thru sq dr• 300 - 1000 Nm / 221 - 738lbs.ft • Length: 1470mm• Weight: 7.00kg

‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench 80055000• 1” Sq. Dr (uses ¾” to 1” stepped convertor)• 700 - 1500 Nm / 500 - 1000lbs.ft • Length: 1470mm• Weight: 10.40kg

NEW LOWER PRICE

BEA

RIN

G R

EMO

VAL

/ IN

STA

LLAT

ION

13

ww

w.s

ykes

-pic

kava

nt.c

om• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

Universal Wheel Bearing Kit• For the removal and installation of flanges and wheel bearings, without the need for removal of suspension struts or wheel hubs from the vehicle (where access permits) • Remove and install wheel bearing without hub removal - Virtually eliminates damage to vehicle components - Removes the need to remove stubborn hub pinch bolt found on modern VW Group vehicles such as Audi A4, VW Passats etc• Tool configures square to bearing – No more having to square hub assembly on hydraulic press • Bearings fitted on nut assemblies – Greatly reduced drag in pushing bearing in / out• Flange extraction bolts supplied - Reduces time taken to complete overall job

08120000OFFER £245.95



of the 72mm GEN2 Bearing Tool

AVAILABLE KITS: Note: Spare Parts are available for all kits via our website and new catalogue

COMBINATION KITS: Massive savings over cost of purchasing individual kits

Part No. Size Applications Price

08123500 62mm Audi A2, VW Lupo (Front) £169.95SAVE £75.05

08124500 66mm Skoda Fabia, VW Fox (Front), Polo £169.95SAVE £75.05

08125500 72mm Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)

£169.95SAVE £75.05

08126500 78mm Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 £275.00

08128500 82mm Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 £295.00

08127500 85mm VW Multivan, Touareg, Transporter (Front / Rear) £325.00

Part No. Size Applications Price

08128000 78, 82 mm Ford / Volvo / Land Rover / Mazda Combined KitSee below for individual applications £425.00

08129000 62, 66, 72, 85mm VW GroupSee below for individual applications

£725.00SAVE £70.00

081220V262, 66, 72, 78,

82, 85mmAll Sizes Master Kit

See below for individual applications £1215.00

Ford 82mm Bearing VW Group Bearing

ENG

INE

SER

VIC

E

14

Tel:

0154

3 67

9900

AVAILABLE KITS: Note: Spare Parts are available for all kits via our website and new catalogue

COMBINATION KITS: Massive savings over cost of purchasing individual kits

08550300

016795V2

01370300

015500V2

03810000

29 Pc. Alternator Free Wheel Pulley Set• Special set of Spline & Torx Socket Bits for the removal of free-wheel alternator pulleys• Locks the alternator, allowing the central locking bolt of the pulley to be released• Selection of 33 tooth reaction nuts and additional adaptors• Updated 29 piece set covers a wide range of popular applications including: - BMW, Citroën, Fiat, Ford, Mercedes, Opel, Peugeot, Porsche, Renault, Toyota, VW Group, Vauxhall, Volvo• Applications list included - Visit www.sykes-pickavant.com for full details

OFFER £79.95SAVE £20.00

LIST PRICE £99.95


LIST PRICE £49.95


LIST PRICE £33.00


LIST PRICE £23.95

GM Gearbox Bearing / Race Remover• For the removal of taper bearing cups from clutch housings in M32, MT 20-6 and MT 32-6 manual gearboxes• Specifically designed to spread the load equally without danger of cracking the gearbox casing • Applications: Widely used in GM, Saab and Fiat Group

Scan the QR code to watch a video of the GM

Gearbox Bearing / Race Remover

£89.95

Universal Clutch Alignment Tool Kit• For modern front wheel drive vehicles with or without pilot / spigot bearings with flywheel fitting diameters from 12 – 20mm• The tools main advantage is that it includes parallel expanding supports in place of more traditional tapered fittings that are hard to keep located• Easy to swap over adaptors suitable for clutch centre sizes from 14.4 to 29mm• Includes small cone: 14.4 - 21mm, large cone: 20.9 - 29mm and sleeves: 12, 14, 15, 16, 17, 18, 19, 20mm

Heavy Duty Strap Wrench• Multipurpose, heavy duty strap wrench,ideal for HGV oil filter removal and industrial applications• Range: 50 to 275mm diameter• Strong cast iron handle for exerting high leverage, with polyester webbing strap

Adjustable Oil Filter Remover - 3 leg• Spider-type wrench, c/w geared legs which automatically tighten as the force is applied• Range: 62 to 93mm diameter• 3/8” sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex

OFFER £39.95SAVE £10.00

LIST PRICE £49.95NEW

66095100Vehicle Fluid Change Syringe - 1.5L• Transparent design to easily view the fluid• Suitable for fluid suction and supply in vehicle service• Ideal for applications such as engine / gear oil and differential fluid• 1.5L capacity with rotative switch off

IND

UC

TIO

N H

EATI

NG

15

ww

w.s

ykes

-pic

kava

nt.c

om

£99.95

960200SP

960260SP

96025000

SP Induction Heater + with Coil Kit (96015000)The SP Induction Heater + is a redesign and upgrade of the popular Mini-Ductor II® and uses new engineering technology for increased energy efficiency and ease of use. Now you can use the power of technology with a flameless heat to quickly release corroded or seized components and other metallic parts. All without the damage normally associated with gas torches. Heats in seconds!Key features of the SP Induction Heater +• Specifically designed for the UK/EU: 230v/6 amp/1000 watt – with full CE certification• Operates cooler for better efficiency, handling and product longevity • Long operating cycle time • Carry Case; with storage for all attachments, fits in tool chests for security • LED work light illuminates work area• Integrated CE filter improves handling of product • 1 year warranty - Parts/Labour• A true 1,000 watts max output power available • Kit includes rope, u-form and pre-formed coil

SUMMER SIZZLER!!INCLUDES SP INDUCTION HEATER + & COIL KIT FOR

£645.00 (960200SP - UK / 960201SP - EU)

96015000

SP Rope Coil Set - x3• Set of three highly adaptable coil allows user to shape to suit• Use three / four windings of coil for maximum performance

SP Heat Pad• Removal of decals, graphics, stripes, emblems & body mouldings etc• Softens the adhesive to make removal simple & effective

OFFER £645.00SAVE £49.95

LIST PRICE £694.95

96015000SP Coil Kit• Contains 8 x popular sizes of interchangeable coils • Supplied in protective case

NEW

90803000

1/2” 18.0v Cordless Impact Wrench c/w 1 x battery• Smart design and ergonomically designed handle• Easily controlled forward / reverse switch • Variable speed trigger• Breakaway Torque: 982NmSpecification: - Weight: 3.08kg - Length: 240mm - Height: 265mm - Breakaway Torque: 982Nm - Battery: 18v 3.0Ah - Charging time: 45 minutes

- EU Version: 90803200

£499.00Max Torque982Nm

90803500

£150.00

Replacement Battery for 1/2” Cordless Impact Wrench • 18.0v Lithium Ion Battery

90803100

1/2” Cordless Impact Wrench c/w 2 x 18.0v batteries• As per 90803000 (left) but includes 2 x 18.0v batteries

- EU Version: 90803300

£649.00

OFFER £74.85SAVE £12.00

LIST PRICE £86.85

£59.50

Contains 8 x popular sizes of interchangeable coils

AIR

TO

OLS

16

Tel:

0154

3 67

9900

9021000090201100

High quality air tools that set the standard for Torque!• Impact wrench with a smart design and ergonomically designed handle

• Single-switch can be changed for easy forward or reverse operation

• Easily adjustable torque regulator

• Can be configured for right and left handed use

• Composite body 90201500

Impact Wrench Specifications:

Part No. Drive Max Torque Nm(Reverse)

Torque Nm(Fwd)

Noise(dBA)

AirConsumption

(l / min)

Weight(kg) Price

902010SP 1/2” 1600 1084 94.2 135 1.8 £179.00

90201500 (Mini) 1/2” 680 500 93.5 130 1.08 £169.00

90202000 3/4” 2600 2000 97 210 3.2 £499.00

90202500 3/8” 680 500 93.5 130 1.08 £169.00

90203500 1/4” 90 90 98.2 105 0.9 £139.00

90204500 1” 3100 2200 110 305 6.8 £849.00

90204500

Signal Hose - 10mm (3/8”)• Length: 10 metres• High-visibilty hose to reduce trip hazard• Abrasion resistant outer cover• Working temp range -40°c to +65°c• Working pressure 300psi• Break pressure 1000psi• N.B. Hose supplied without fittings

Rubber Boot - For 90201000• For use with 90201000 1/2” Impact Wrench (above)• Protects gun from accidental damage*Impact wrench not included

£29.95

£64.99

£16.99

Scan the QR codesee our range of

Air Tools

INCLUDES FREE RUBBER BOOT

90206000

90207000

‘Vibro-Impact’ Air Hammer• A unique concept to aid the removal of seized suspension parts• The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered Impact Hammer • Allows the operator to control & gradually increase the force being applied, in order to loosen seized components • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied • Low vibration for user comfort • Supplied with a handy wall mounted storage bracket and a set of four impact hammers for variable applications

Air Die Grinder• Vibration absorbing handle• Swivel exhaust• Stepless trigger• Can also be used for carbide cutters through high precision cycling

OFFER £275.00SAVE £60.00

LIST PRICE £335.00

Scan the QR code to watch a

video of the ‘Vibro-Impact’

Air Hammer

WO

RKS

HO

P EQ

UIP

MEN

T

17

ww

w.s

ykes

-pic

kava

nt.c

omA NEW range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks

Part No. RatingHeight(mm)

Width(mm)

Depth(mm)

Bed Depth(mm)

Range(mm)

Weight (kg)

Price

53436200* 20T 2030 940 650 180 65 - 1030 165 £665.00

53436400* 30T 2060 1120 650 200 115 - 1020 230 £985.00

53436500 50T 2290 1220 650 210 70 - 1065 370 £1545.00

• Welded, heavy duty steel frame • Two speed pump• Overload safety valve • Automatic arm return• Pressure gauge • V blocks• Winch for table (For models 53436400 & 53436500) • Manufactured in the EU• Piston over-travel limit stop

*Recommended for use with Universal Press Support Block - 08770000 - See below

36600500

£419.00Fuel Extractor / Retriever• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc• Operates from workshop compressed air (no risk of sparks)• Mobile 45-litre tank (on wheels)• Cleanly draws up or pushes out fuel due to a venturi system• Includes 2 anti-static ground cables, overflow line and 3 fuel probes• Emptying via the tank filler neck or fuel lines• Stainless steel

53390000

£269.00

Pneumatic Oil Extractor• Remove and extract waste fluids or oil from an engine with flexible PV tube and robust probe• Powered from compressed air• 70L tank capacity• Adjustable 10L oil capture pan• Visible fill level indicator• 1 - 2 L/Min Suction capacity depending on nozzle used• Working pressure 8-10 Bar• Emptying with compressed air 1-2 bar• Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubesWARNING: Do not use with corrosive or inflammable products

53399000Retractable Hose Reel - 20m x 10mm• Spring driven retractable hose reel c/w wall mounting brackets• Heavy duty UV stabilised polypropylene• Suitable for compressed air or cold water up to 20 bar working pressure • Includes 20 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard • 3/8” bsp female inlet and the hose terminates in a 3/8” bspt male

Hoses also available in 20m x 8mm (3/8” fittings) and 18m x 12mm (1/2” fittings).

Contact Customer Services for more information

NEWNEW

10T, 15T & 25T MODELSALSO AVAILABLE

Ask for details

53399500Retractable Hose Reel - 10m x 10mm• Spring driven retractable hose reel c/w wall mounting brackets• UV stabilised polypropylene • Suitable for compressed air or cold water up to 20 bar working pressure• Includes 10 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard• 3/8” bspt male inlet and the hose terminates in a 3/8” bspt male

Hoses also available in 12m x 6mm (1/4” fittings) and 12m x 8mm (3/8” fittings).

Contact Customer Services for more information

OFFER £119.00SAVE £13.00

LIST PRICE £132.00

OFFER £199.95SAVE £71.05

LIST PRICE £271.00

“PRESS” HOME YOUR ADVANTAGE! SPECIAL DEAL PRICE WHEN PURCHASING A WORKSHOP PRESS

& PRESS SUPPORT BLOCK

Part No. Rating List Price Save Offer Price

534362SP 20T £964.00 £169.00 £795.00

534364SP 30T £1284.00 £189.00 £1095.00

08770000 - Universal Press Support Block• Universal Support for use with a workshop press• Easily press bearings on a wide variety of suspension arms• Three point contact guarantees a perfect, safe support

• Adjustable height anvil bolts• Swivel element for added versatility

WO

RKS

HO

P EQ

UIP

MEN

T

18

Tel:

0154

3 67

9900

385800SP

386800SP1

Pneumatic Coil Spring Compressor Workstation - Extra Heavy Duty Model c/w FREE Mercedes Bracket SetUniversal piece of equipment for assembling and disassembling struts and coil springs• Suitable for cars, 4WD’s and light commercials that use McPherson strut type suspension systems• Front and side spring clamps designed for fast changeover using unique Brackets System• Fitted with Extra Heavy Duty Pneumatic Cylinder - Compression force (at 10 bar) = 2452 kg • Ideal for Extra Heavy Duty applications i.e. SUV’s, 4WD’s etc where full spring compression is required• Double-depth front plate for use on extra-long strut assemblies• Safety locking valves system – locks safety cage and prevents usage with cage open

Mechanical Coil Spring Compressor Workstation c/w FREE Standard Bracket C - Medium Sized Bracket 105 - 182mmUniversal piece of equipment for assembling & disassembling struts and coil springs• Standard workstation construction but with Heavy Duty Mechanical compression components in place of pneumatic parts• Allows for use where air supply is limited, restricted or unavailable i.e. Mobile use• High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring• Long main spindle achieves large 420mm of stroke – even greater than our pneumatic workstations• Powered by easy access 19mm hex drive on top of tool direct onto main spindle and can be used with either hand tools or even impact air tools• Includes adjustable vice clamp as standard• Compatible with all other Sykes-Pickavant workstation standard jaws, brackets & accessories

£795.00

£1595.00

38480100

38480500 38480600 38480700

38480200 38480400Mercedes BracketSet - A, B, C & E Class

Special BracketPorsche Cayenne / VW Touareg

Special BracketMercedes C Class(2010-)

Special BracketNissan Qashqai

Double DepthStrut Vice

Upper Jaw Setfor High Compression Springs

£235.00£98.95£39.95

£177.95£95.00 £115.00

Optional Accessories for use with Suspension Workstations

MERCEDES BRACKET SET (38480100) UPPER BRACKET FOR MERCEDES A, B, C, E CLASS

& LOWER BRACKET FOR MERCEDES E CLASS

WORTH £235.00

FREE

WHEN YOU PURCHASE 385800SP

UP TO 2452KG OF FORCE (AT 10 BAR)

UP TO 1600KG OF FORCE

STANDARD BRACKET C (38481400)

SINGLE MEDIUM SIZED BRACKET(105 - 182mm) THAT COVERSMOST REGULAR SIZED COIL

SPRINGS

WORTH £120.95

FREE

WHEN YOU PURCHASE 386800SP1

A NEW range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks

TEST

ING

19

ww

w.s

ykes

-pic

kava

nt.c

om

Portable 4 Gas Analyser with PrinterDeveloped from the 32420000 gas analyser• For fault diagnosis, tuning and pre-MOT testing• Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg• Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy• Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing• Provides Lambda / AFR measurement and corrected CO• Internal memory stores up to 250 test results - manual & automatic recording options• Pump speed control - Improves battery life • Up to 4 hours internal battery life• Bluetooth connectivity to PC (additional software required) • Large graphic display • Free analytical software available to download • Includes printer and AC / 12v chargers

30653500

306615V2

PP319FT

SPe Automotive Electronic Workshop Tool• For use on modern vehicles equipped with an EOBD socket, which have a range of on-board Electronic Control Systems (ECU’s) fitted for monitoring and controlling critical vehicle functionality• Ideal tool for use in Diagnostic specific workshops• SPe Workshop benefits from having all of the features found in both SPe Service and SPe Bodyshop versions – together in one high level platform • Extra features include DTC Scanning & Clearing, Engine component parameter adjustments & resetting, Injector and Fuel Component Coding & much more!For further details and to read more about SPe and its features, please visit our website: www.sykes-pickavant.com

TPMS PLUS - High Level Diagnostic TPMS ToolSensor Activation - Sensor Checking - Sensor Replacement - All in One Single Tool• Able to re-program “Clone” valves wirelessly without using a PC or docking station• Approved for use with Schrader & Alligator EU frequency re-programmable TPMS valves- Step by step guidance for valve cloning- Able to copy old valve ID or create new ones- Sensor replacement procedures• Connects to TPMS ECU via EOBD diagnostic lead (Containing full multiplexing functionality)• Sensor re-programming via the EOBD socket• Sensor & TPMS ECU fault code reading / deletion

For further details and to read more about TPMS and its features, please visit our website: www.sykes-pickavant.com

Power Probe III Circuit Tester• Flame print design• Relay & Component Tester• Voltmeter• Bad ground indicator• Continuity Tester• Positive / Negative voltage indicator• 20 foot jump lead set

325200SP

MDX390SP

£1495.00

Sykes-Pickavant Battery & Electrical Systems Tester • Higher Performance model for batteries rated from 100 – 1200 CCA• Suitable for luxury & 4x4 vehicles with higher level electronic systems • Determines the state of a Battery and Electrical System • Simple & Accurate Tests - without heat or sparks being created • Integrated printer with user defined printout header for immediate review with customer • Suitable for all battery types inc AGM & GEL Available Tests: - 12v batteries & electrical systems - Starting & Charging system voltage - Bad Cell detection - Test discharged batteries down to 1 volt

£449.00

£89.95

£1295.00

NEW

STAR BUY!

SAVE £1300.00!

FREE 12V 2A ACCU-SMART

BATTERY CHARGER WHEN YOU PURCHASE MDX390SPWORTH £47.00

845122SP

OFFER £995.00SAVE £1300.00LIST PRICE £2295.00

BR

AKI

NG

20

Tel:

0154

3 67

9900

34201000Manual Pressure Brake Bleeder • Compact solution – for easy one man operation• Portable unit – no power or air supply required• Combination of Mityvac pressure bleeder & SP aluminium pressure bleed cap• OE recommended pressure brake bleeding solution• Controllable output via hand pump and pressure gauge

NEW

£199.00

34300100

034800SP

34500000

Automatic Brake Bleeder - 12vNow includes aluminium Euro cap - angled screw type• Compatible with ABS systems• 12v powering with reverse polarity warning• Includes pump with automatic shut off valve• Regulator from 0 to 3Bar• 5L reservoir with visible level and min level indication• Auto power OFF when min level reached• 12V power cable with jack (L: 4m)• Fluid cable for brake fluid with quick coupling system (Length: 4m)• Includes fluid collection bottle & European screw-on reservoir cap• Stainless steel body• Professional pump and regulator fittedModel specific caps also available

Vacuum Brake Bleeder c/w FREE Auto Filler• Removes the brake fluid from the master cylinder by sucking it out of the filler• Faster fluid changes as not all the fluid needs to be bled via a bleed nipple• No need to have a pressure tight seal on those difficult to get at master cylinder reservoirs• Uses standard workshop compressed air supply (70 – 170 psi) to generate vacuum• When combined with the Automatic Brake Fluid Filler Unit (03481100 - included), turns brake and clutch system bleeding into a genuine one man operation

Drain Twin Pressure & Vacuum Brake BleederFor servicing advanced ABS Brake systems, the Drain Twin is a versatile brake bleeder for all kinds of brake service work, including advanced ABS systems with stability and traction control functions. • VM approval from 11 international vehicle manufacturers • One air-operated pump – twin functions – pressure & vacuum• Pulsating pressure pump purges brake system more effectively than a constant pressure pump - Adjustable working pressure up to 2.8 bar (42 psi) • Non-drip couplings and nipples for a clean and safe working environment • Pressure equalization system ensures new fluid container is kept sealed - No contact required with new fluid eliminates risk of contaminationModel specific caps also available

£579.00

£895.00

FREE BRAKE FLUID AUTO FILLER

WHEN YOU PURCHASE 034800SP

WORTH £47.50

WHEN YOU PURCHASE MDX390SPWORTH £47.00

03481100

• A stand-alone brake fluid container for automatic filling of brake fluid reservoirs

OFFER £129.50SAVE £47.50

LIST PRICE £177.00


LIST PRICE £24.95

66050400Vehicle Fluid Change Syringe - 200cc • Transparent design to easily view the fluid• Suitable for fluid suction and supply in vehicle service• Composite plastic resistant to brake fluid and antifreeze• 200cc capacity with quick disconnect tube

CO

OLI

NG

21

ww

w.s

ykes

-pic

kava

nt.c

om

331595V2

Universal Hose Clamp• Clamping Range: 8 - 70mm• 1/4” drive and thumb screw for adjustment

Cooling Cap Set - To update 33159500• Set of 5 additional cap adaptors to update 33159500 (‘315’ Series Cooling System Test Kit) to present coverage• BMW: 3i, Chevrolet: Orlando, Sonic, Spark, Trailblazer, Trax, Volt, Mercedes: A Class (168/169), B Class (245), Sprinter 06-, Vaneo (414), Mini: R55, R56, R57, R58, R59, R60, One, Clubman, Cooper, Countryman, Roadster, Saab: 9-5, Vauxhall: Adam, Ampera, Astra J, Astra GTC, Insignia, Meriva B, Mokka and Zafira C Tourer

Cooling Cap Set - To update 331595V2• Set of 2 additional cap adaptors to update 331595V2 (‘315’ Series Cooling System Test Kit - above) to present coverage• BMW: 3i, Chevrolet: Orlando, Sonic, Spark, Trailblazer, Trax, Volt, Mini: R55, R56, R57, R58, R59, R60, One, Clubman, Cooper, Countryman, Roadster, Saab: 9-5, Vauxhall: Adam, Ampera, Astra J, Astra GTC, Insignia, Meriva B, Mokka and Zafira C Tourer


LIST PRICE £30.00

‘315’ Series Cooling System Test Kit• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge and Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrenchOFFER £235.00


03265000

33159700

33159800

Comprehensive applications listing provided with each kit

331400V2HGV Cooling System Pressure Test KitUpdated kit now includes additional caps covering DAF LF, Renault D Series, Caterpillar, Optare bus, MAN bus & Dart SLF• Contents: - High capacity metal bodied hand pump with 0 - 2.5 bar pressure gauge - Quick-Connect Hose Assembly - 10 x Reservoir and Radiator Pressure Caps• Dual Gauge measures in p.s.i and bar• Additional Pressure Caps available - refer to applications guide • Applications include: DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo

33195000Combustion Leakage Tester• Accurate and fast diagnosis of cylinder head gasket leaks• Quick connector for use with 315 / 316 / 317 Series Cap Adaptors• Suitable for use with both Petrol & Diesel engines• Supplied with both Standard & Sensitive Reaction Test Fluid (250ml)

£69.95

NEWNEW

NEW UPDATED KIT

£295.00

For a full applications list, please visit our website - www.sykes-pickavant.com

OFFER £69.95SAVE £20.00

LIST PRICE £89.95


LIST PRICE £45.95

WO

RK

WEA

R

22

Tel:

0154

3 67

9900

Lee Cooper Quilted Jacket - Black• 100% nylon jacket with boxed quilt effect design• 100% polyester light weight padding• Zip fastening to both front & hand pockets• Fully functional chest pocket with contrast zip

LCJKT436

LCPNT205

LCTS003

LCPNT208

LC022

LCKP

Available sizes:M, L, XL, XXL

£54.99

£19.99

£15.99

£6.99

£34.99

£45.99Lee Cooper Hi-Top Safety Boot• Available in UK sizes: 7 - 12• Lightweight & Flexible with modern styling• Low profile anti-slip rubber sole• Steel Toe Cap to ISO20345 standard• PU Fabric Upper with textured rubber toe cap cover

Lee Cooper Cargo Work Trousers - Black• 2 combat thigh pockets• Pocket flaps with velcro• Zip fly• Belt loops• 65% polyester / 35% cotton twill

Available in waist sizes:32”, 34”, 36”, 38”, 40”, 42”

Available in leg lengths:Short (30”) Regular (32”) Long (34”)

Lee Cooper Knee Pads for Lee Cooper Cargo / Holster Trousers • Suitable for use with LCPNT206, LCPNT208 and LCPNT216 trousers• Material: EVA flexible

SPWF66 / SPWF55

£29.99 SPWF55

SPWF66

SP Safety Trainer / Boot - Moulded Sole• Available in UK sizes: 7 - 12• Dual Density PU, Oil & Acid Resistant• Steel Toe Cap to ISO20345 standard• Black Suede / Grey Mesh Upper• Steel Toe Cap & Mid-Sole

Available in waist sizes:32”, 34”, 36”, 38”, 40”, 42”

Available in leg lengths:Short (30”), Regular (32”) Long (34”)

Lee Cooper Cargo Trousers - Black / Grey• Two colour trouser combining comfort & functionality• Extending velcro fastening tool belt loop• Adjustable elasticated gripper waistband • Triple stitched seams• Top loader knee pad pockets• High abrasion resistant contrast panelling to leg hem panels• 2 x front pockets, 2 x bellow back pockets, 2 x pleated leg pockets, Pen pocket, Phone pocket• 65% polyester / 35% cotton double warp double weft canvas fabric

Lee Cooper Technical Polo Shirt - Black• Sportswear design, fit & styling• Contrasting red placket and grey side panels with pockets• 100% polyester pique fabric

Available in sizes:M, L, XL, XXL, XXXL

LCSCK603

£9.99

Lee Cooper Heavy Duty Work Socks• Pack of 5 pairs - one size fits all

‘315’ Series Cooling System Test Kit• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge and Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench

Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United KingdomTel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: [email protected] www.sykes-pickavant.com

WORKSHOP TOOLS

Sykes-Pickavant are proud to support Breakthrough Breast Cancer and will be making a donation to the charity at the end of the promotion. For further details visit www.breakthrough.org.uk

ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 30TH SEPTEMBER 2014 - REF: SPQ314GBPCOPYRIGHT 2014 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.

Distributor Stamp:

69079000

03280000

05920000

16 Pc. Locking Wheel Nut Set• For the removal of locking wheel nuts• Socket set includes a wide range of sizes & shapes for most vehicle applications

Tyre Tread Depth Gauge• MOT approved gauge complete with pocket clip• Measures 0 – 26mm in 1mm increments• Inc. 1.6mm depth measurement for MOT regulations

Corrossion Assessment Tool for MOT• Designed by the VI for checking bodywork and structural corrosion• Approved by the VOSA for MOT Inspections

NEW

OFFER £82.95SAVE £17.00

LIST PRICE £99.95

OFFER £19.95SAVE £10.00

LIST PRICE £29.95


LIST PRICE £5.99

OFFER £49.95SAVE £39.55

LIST PRICE £89.50


LIST PRICE £13.50


LIST PRICE £9.95

01800000

0283000066099000

Straight Fluted Extractor Master Set • For the removal of broken studs 6 - 14mm diameter• Broken stud is drilled & an extractor is used to remove the remains of the stud• Contents: - x5 Drill Bits - x10 Drill Guides - x5 Extractor Assemblies

Universal Circlip Tool• T-Bar handle with screw action for precise control• Use for internal & external applications• Circlips from 44 - 178mm / Jaws open up to 70mm• Supplied with 4 pairs of inter-changeable tips: - 2.29mm / 3.00mm / 3.91mm / 4.32mm diameter

5 Pc. Screw Extractor Set• Spiral LH screw extractors (easy-outs)• 3 - 19mm capacity• Supplied in plastic case

OFFER £89.95SAVE £35.05

LIST PRICE £125.00

02760000Air Blow Gun• Fingertip control provides infinitely variable airflow• 100mm high velocity cranked nozzle• 1/4” BSP thread connection

66088700

9 Pc. Hook, Pick & Scraper Set• Hardened chrome vanadium steel• Ergonomic soft grip handles• Includes multi-purpose scraper, ideal for gasket scraping• Set of 9 hooks, picks and scraper, ideal for the fitting and removal of O rings, seals, bushes, springs, cotter pins and fuses etc• Contents: 4 x standard hooks & picks / 4 x mini hooks & picks / 1 x straight edge scraper


LIST PRICE £21.00

Sykes-Pickavant Q3 - July - Sept 2014 Promo Brochure

Documents

Transcript of Sykes-Pickavant Q3 - July - Sept 2014 Promo Brochure